sob, 2 kwi 2022, 00:38:24 CEST

filament/Devil Design PLA @ Tevo Tarantula.ini

@@ -0,0 +1,57 @@
+# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-03-31 at 20:03:57 UTC
+bed_temperature = 60
+bridge_fan_speed = 100
+compatible_printers = "Tevo Tarantula";"Tevo Tarantula Dual";"Tevo Tarantula Mixing"
+compatible_printers_condition = 
+compatible_prints = 
+compatible_prints_condition = 
+cooling = 1
+disable_fan_first_layers = 1
+end_filament_gcode = "; Filament-specific end gcode"
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 100
+filament_colour = #FF8000
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_cost = 20.99
+filament_density = 1.24
+filament_deretract_speed = nil
+filament_diameter = 1.75
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_max_volumetric_speed = 15
+filament_minimal_purge_on_wipe_tower = 15
+filament_notes = ""
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_before_travel = nil
+filament_retract_before_wipe = nil
+filament_retract_layer_change = nil
+filament_retract_length = nil
+filament_retract_lift = nil
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = nil
+filament_settings_id = ""
+filament_soluble = 0
+filament_spool_weight = 250
+filament_toolchange_delay = 0
+filament_type = PLA
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+filament_vendor = Devil Design
+filament_wipe = nil
+first_layer_bed_temperature = 60
+first_layer_temperature = 230
+full_fan_speed_layer = 4
+inherits = 
+max_fan_speed = 100
+min_fan_speed = 100
+min_print_speed = 15
+slowdown_below_layer_time = 15
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0"
+temperature = 230

printer/Tevo Tarantula Dual.ini

@@ -0,0 +1,78 @@
+# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-03-31 at 20:05:34 UTC
+bed_custom_model = 
+bed_custom_texture = 
+bed_shape = 0x0,200x0,200x200,0x200
+before_layer_gcode = 
+between_objects_gcode = 
+color_change_gcode = M600
+cooling_tube_length = 5
+cooling_tube_retraction = 91.5
+default_filament_profile = 
+default_print_profile = 
+deretract_speed = 0,0
+end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\n\nM104 S0  ; turn off hotend temperature\nM140 S40 ; set heatbed to 40C\n\nG28 X0  ; home X axis\nG1 Y200 ; move pirint bed to the front\n\nM84     ; disable motors\n
+extra_loading_move = -2
+extruder_colour = ;
+extruder_offset = 0x0,0x0
+gcode_flavor = marlin2
+high_current_on_filament_swap = 0
+host_type = octoprint
+inherits = 
+layer_gcode = 
+machine_limits_usage = emit_to_gcode
+machine_max_acceleration_e = 5000,5000
+machine_max_acceleration_extruding = 1250,1250
+machine_max_acceleration_retracting = 1250,1250
+machine_max_acceleration_travel = 1500,1250
+machine_max_acceleration_x = 1000,1000
+machine_max_acceleration_y = 1000,1000
+machine_max_acceleration_z = 500,200
+machine_max_feedrate_e = 100,100
+machine_max_feedrate_x = 200,200
+machine_max_feedrate_y = 200,200
+machine_max_feedrate_z = 12,12
+machine_max_jerk_e = 2.5,2.5
+machine_max_jerk_x = 8,8
+machine_max_jerk_y = 8,8
+machine_max_jerk_z = 0.2,0.4
+machine_min_extruding_rate = 0,0
+machine_min_travel_rate = 0,0
+max_layer_height = 0,0
+max_print_height = 170
+min_layer_height = 0.07,0.07
+nozzle_diameter = 0.4,0.4
+parking_pos_retraction = 92
+pause_print_gcode = M601
+print_host = 
+printer_model = 
+printer_notes = 
+printer_settings_id = 
+printer_technology = FFF
+printer_variant = 
+printer_vendor = 
+printhost_apikey = 
+printhost_cafile = 
+remaining_times = 1
+retract_before_travel = 2,2
+retract_before_wipe = 0%,0%
+retract_layer_change = 0,0
+retract_length = 0.8,0.8
+retract_length_toolchange = 10,10
+retract_lift = 0.4,0.4
+retract_lift_above = 0,0
+retract_lift_below = 0,0
+retract_restart_extra = 0,0
+retract_restart_extra_toolchange = 0,0
+retract_speed = 35,35
+silent_mode = 1
+single_extruder_multi_material = 1
+start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\n\nG28 ; home all axes\nG29 ; Bed level\nG1 X0 Y0 F5000; Move to 0,0\nG1 Z5 F5000 ; lift nozzle\n
+template_custom_gcode = 
+thumbnails = 
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+variable_layer_height = 1
+wipe = 1,1
+z_offset = 0

printer/Tevo Tarantula.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-03-30 at 21:50:46 UTC
+# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-03-31 at 16:49:58 UTC
 bed_custom_model = 
 bed_custom_texture = 
 bed_shape = 0x0,200x0,200x200,0x200
@@ -20,7 +20,7 @@ host_type = octoprint
 inherits = 
 layer_gcode = 
 machine_limits_usage = emit_to_gcode
-machine_max_acceleration_e = 10000,5000
+machine_max_acceleration_e = 5000,5000
 machine_max_acceleration_extruding = 1250,1250
 machine_max_acceleration_retracting = 1250,1250
 machine_max_acceleration_travel = 1500,1250
@@ -32,8 +32,8 @@ machine_max_feedrate_x = 200,200
 machine_max_feedrate_y = 200,200
 machine_max_feedrate_z = 12,12
 machine_max_jerk_e = 2.5,2.5
-machine_max_jerk_x = 10,10
+machine_max_jerk_x = 8,8
-machine_max_jerk_y = 10,10
+machine_max_jerk_y = 8,8
 machine_max_jerk_z = 0.2,0.4
 machine_min_extruding_rate = 0,0
 machine_min_travel_rate = 0,0
@@ -56,14 +56,14 @@ remaining_times = 1
 retract_before_travel = 2
 retract_before_wipe = 0%
 retract_layer_change = 0
-retract_length = 2
+retract_length = 0.8
 retract_length_toolchange = 10
-retract_lift = 0
+retract_lift = 0.4
 retract_lift_above = 0
 retract_lift_below = 0
 retract_restart_extra = 0
 retract_restart_extra_toolchange = 0
-retract_speed = 40
+retract_speed = 35
 silent_mode = 1
 single_extruder_multi_material = 0
 start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\n\nG28 ; home all axes\nG29 ; Bed level\nG1 X0 Y0 F5000; Move to 0,0\nG1 Z5 F5000 ; lift nozzle\n
@@ -74,5 +74,5 @@ use_firmware_retraction = 0
 use_relative_e_distances = 0
 use_volumetric_e = 0
 variable_layer_height = 1
-wipe = 0
+wipe = 1
 z_offset = 0