nie, 13 lut 2022, 23:54:16 CET

filament/F3D TPU.ini

@@ -1,55 +1,57 @@
-# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-18 at 20:10:26 UTC
+# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-02-11 at 22:28:16 UTC
 bed_temperature = 50
-bridge_fan_speed = 80
+bridge_fan_speed = 100
 compatible_printers = 
 compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model!="MK2SMM" and printer_model!="MINI" and num_extruders==1 && ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material)
 compatible_prints = 
-compatible_prints_condition = notes =~/.*PROFILE_TPU.*/
+compatible_prints_condition = 
 cooling = 1
-disable_fan_first_layers = 3
+disable_fan_first_layers = 4
 end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1.15
+extrusion_multiplier = 1.1
 fan_always_on = 1
 fan_below_layer_time = 100
-filament_colour = #000000
+filament_colour = #008000
 filament_cooling_final_speed = 3.4
 filament_cooling_initial_speed = 2.2
 filament_cooling_moves = 4
-filament_cost = 136
+filament_cost = 32.99
-filament_density = 1.22
+filament_density = 1.21
 filament_deretract_speed = 25
 filament_diameter = 1.75
 filament_load_time = 0
 filament_loading_speed = 28
 filament_loading_speed_start = 3
-filament_max_volumetric_speed = 1.2
+filament_max_volumetric_speed = 2.5
 filament_minimal_purge_on_wipe_tower = 15
 filament_notes = ""
 filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-filament_retract_before_travel = nil
+filament_retract_before_travel = 3
 filament_retract_before_wipe = nil
 filament_retract_layer_change = nil
 filament_retract_length = 0
-filament_retract_lift = nil
+filament_retract_lift = 0
 filament_retract_lift_above = nil
 filament_retract_lift_below = nil
 filament_retract_restart_extra = nil
 filament_retract_speed = nil
 filament_settings_id = ""
 filament_soluble = 0
+filament_spool_weight = 0
 filament_toolchange_delay = 0
 filament_type = FLEX
 filament_unload_time = 0
 filament_unloading_speed = 90
 filament_unloading_speed_start = 100
-filament_vendor = Generic
+filament_vendor = SainSmart
 filament_wipe = 0
 first_layer_bed_temperature = 50
-first_layer_temperature = 240
+first_layer_temperature = 230
-inherits = Generic FLEX
+full_fan_speed_layer = 6
-max_fan_speed = 50
+inherits = SainSmart TPU
-min_fan_speed = 10
+max_fan_speed = 80
-min_print_speed = 10
+min_fan_speed = 80
-slowdown_below_layer_time = 20
+min_print_speed = 15
+slowdown_below_layer_time = 10
 start_filament_gcode = "M900 K0"
-temperature = 240
+temperature = 230

filament/Fiberflex 30D.ini

@@ -0,0 +1,57 @@
+# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-02-13 at 19:55:49 UTC
+bed_temperature = 50
+bridge_fan_speed = 100
+compatible_printers = 
+compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model!="MK2SMM" and printer_model!="MINI" and num_extruders==1 && ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material)
+compatible_prints = 
+compatible_prints_condition = 
+cooling = 1
+disable_fan_first_layers = 4
+end_filament_gcode = "; Filament-specific end gcode"
+extrusion_multiplier = 1.05
+fan_always_on = 1
+fan_below_layer_time = 100
+filament_colour = #F9F06B
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_cost = 32.99
+filament_density = 1.21
+filament_deretract_speed = 25
+filament_diameter = 1.75
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_max_volumetric_speed = 2.5
+filament_minimal_purge_on_wipe_tower = 15
+filament_notes = ""
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_before_travel = 3
+filament_retract_before_wipe = nil
+filament_retract_layer_change = nil
+filament_retract_length = 1
+filament_retract_lift = 0
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = nil
+filament_settings_id = ""
+filament_soluble = 0
+filament_spool_weight = 0
+filament_toolchange_delay = 0
+filament_type = FLEX
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+filament_vendor = SainSmart
+filament_wipe = 0
+first_layer_bed_temperature = 50
+first_layer_temperature = 210
+full_fan_speed_layer = 6
+inherits = SainSmart TPU
+max_fan_speed = 70
+min_fan_speed = 50
+min_print_speed = 15
+slowdown_below_layer_time = 10
+start_filament_gcode = "M900 K0"
+temperature = 210

print/0.20mm QUALITY @TPU.ini

@@ -1,43 +1,52 @@
-# generated by PrusaSlicer 2.3.0+linux-x64-GTK3 on 2021-05-03 at 14:23:00 UTC
+# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-02-11 at 22:28:20 UTC
 avoid_crossing_perimeters = 1
 avoid_crossing_perimeters_max_detour = 0
-bottom_fill_pattern = rectilinear
+bottom_fill_pattern = monotonic
-bottom_solid_layers = 3
+bottom_solid_layers = 4
-bottom_solid_min_thickness = 0
+bottom_solid_min_thickness = 0.5
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
 bridge_speed = 15
+brim_separation = 0.1
+brim_type = outer_only
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
 complete_objects = 0
 default_acceleration = 1000
-dont_support_bridges = 1
+dont_support_bridges = 0
-draft_shield = 0
+draft_shield = disabled
-elefant_foot_compensation = 0
+elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.45
 external_perimeter_speed = 15
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 25
+extruder_clearance_height = 20
 extruder_clearance_radius = 45
 extrusion_width = 0.45
 fill_angle = 45
-fill_density = 10%
+fill_density = 15%
-fill_pattern = rectilinear
+fill_pattern = gyroid
-first_layer_acceleration = 1000
+first_layer_acceleration = 800
+first_layer_acceleration_over_raft = 0
 first_layer_extrusion_width = 0.42
 first_layer_height = 0.2
-first_layer_speed = 15
+first_layer_speed = 20
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
 gap_fill_speed = 15
 gcode_comments = 0
 gcode_label_objects = 1
-infill_acceleration = 1250
+gcode_resolution = 0.0125
-infill_anchor = 600%
+infill_acceleration = 1000
-infill_anchor_max = 50
+infill_anchor = 2.5
+infill_anchor_max = 12
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.45
@@ -45,7 +54,7 @@ infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
 infill_speed = 20
-inherits = 
+inherits = 0.20mm QUALITY @MK3
 interface_shells = 0
 ironing = 0
 ironing_flowrate = 15%
@@ -56,11 +65,12 @@ layer_height = 0.2
 max_print_speed = 200
 max_volumetric_speed = 0
 min_skirt_length = 4
-notes = PROFILE_TPU
+mmu_segmented_region_max_width = 0
+notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
 output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
-overhangs = 0
+overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.45
@@ -68,52 +78,65 @@ perimeter_speed = 15
 perimeters = 2
 post_process = 
 print_settings_id = 
+raft_contact_distance = 0.2
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
 raft_layers = 0
 resolution = 0
-seam_position = aligned
+seam_position = nearest
 single_extruder_multi_material_priming = 0
-skirt_distance = 3
+skirt_distance = 5
-skirt_height = 1
+skirt_height = 3
-skirts = 2
+skirts = 1
 slice_closing_radius = 0.049
+slicing_mode = regular
 small_perimeter_speed = 15
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 0.45
-solid_infill_speed = 15
+solid_infill_speed = 20
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
 support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = 0
 support_material_buildplate_only = 0
-support_material_contact_distance = 0.1
+support_material_closing_radius = 2
+support_material_contact_distance = 0.2
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.35
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
 support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
+support_material_interface_speed = 80%
 support_material_pattern = rectilinear
 support_material_spacing = 2
-support_material_speed = 0
+support_material_speed = 40
+support_material_style = grid
 support_material_synchronize_layers = 0
-support_material_threshold = 55
+support_material_threshold = 50
 support_material_with_sheath = 0
-support_material_xy_spacing = 50%
+support_material_xy_spacing = 60%
+thick_bridges = 0
 thin_walls = 0
 threads = 24
-top_fill_pattern = rectilinear
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 15
+top_solid_infill_speed = 20
-top_solid_layers = 3
+top_solid_layers = 6
-top_solid_min_thickness = 0
+top_solid_min_thickness = 0.7
 travel_speed = 180
+travel_speed_z = 12
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
 wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60

print/QUALITY - 0.25mm - TPU.ini

@@ -1,114 +0,0 @@
-# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-18 at 14:54:12 UTC
-avoid_crossing_perimeters = 1
-bottom_fill_pattern = rectilinear
-bottom_solid_layers = 3
-bottom_solid_min_thickness = 0
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.95
-bridge_speed = 15
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-draft_shield = 0
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 15
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 25
-extruder_clearance_radius = 45
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 10%
-fill_pattern = rectilinear
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 15
-gap_fill_speed = 15
-gcode_comments = 0
-gcode_label_objects = 1
-infill_acceleration = 1250
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 20
-inherits = 
-interface_shells = 0
-layer_height = 0.25
-max_print_speed = 200
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = PROFILE_TPU
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
-overhangs = 0
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 15
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = aligned
-single_extruder_multi_material_priming = 0
-skirt_distance = 3
-skirt_height = 1
-skirts = 2
-slice_closing_radius = 0.049
-small_perimeter_speed = 15
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 15
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_auto = 1
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.1
-support_material_enforce_layers = 0
-support_material_extruder = 0
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 0
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 0
-support_material_synchronize_layers = 0
-support_material_threshold = 55
-support_material_with_sheath = 0
-support_material_xy_spacing = 50%
-thin_walls = 0
-threads = 4
-top_fill_pattern = rectilinear
-top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 15
-top_solid_layers = 3
-top_solid_min_thickness = 0
-travel_speed = 180
-wipe_tower = 1
-wipe_tower_bridging = 10
-wipe_tower_no_sparse_layers = 0
-wipe_tower_rotation_angle = 0
-wipe_tower_width = 60
-wipe_tower_x = 170
-wipe_tower_y = 125
-xy_size_compensation = 0