mirror of
https://github.com/pgrondek/prusa-slicer-profiles.git
synced 2024-11-22 12:23:43 +00:00
nie, 13 lut 2022, 23:54:16 CET
This commit is contained in:
parent
54df895559
commit
929da8cf7e
@ -1,55 +1,57 @@
|
||||
# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-18 at 20:10:26 UTC
|
||||
# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-02-11 at 22:28:16 UTC
|
||||
bed_temperature = 50
|
||||
bridge_fan_speed = 80
|
||||
bridge_fan_speed = 100
|
||||
compatible_printers =
|
||||
compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model!="MK2SMM" and printer_model!="MINI" and num_extruders==1 && ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material)
|
||||
compatible_prints =
|
||||
compatible_prints_condition = notes =~/.*PROFILE_TPU.*/
|
||||
compatible_prints_condition =
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 3
|
||||
disable_fan_first_layers = 4
|
||||
end_filament_gcode = "; Filament-specific end gcode"
|
||||
extrusion_multiplier = 1.15
|
||||
extrusion_multiplier = 1.1
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 100
|
||||
filament_colour = #000000
|
||||
filament_colour = #008000
|
||||
filament_cooling_final_speed = 3.4
|
||||
filament_cooling_initial_speed = 2.2
|
||||
filament_cooling_moves = 4
|
||||
filament_cost = 136
|
||||
filament_density = 1.22
|
||||
filament_cost = 32.99
|
||||
filament_density = 1.21
|
||||
filament_deretract_speed = 25
|
||||
filament_diameter = 1.75
|
||||
filament_load_time = 0
|
||||
filament_loading_speed = 28
|
||||
filament_loading_speed_start = 3
|
||||
filament_max_volumetric_speed = 1.2
|
||||
filament_max_volumetric_speed = 2.5
|
||||
filament_minimal_purge_on_wipe_tower = 15
|
||||
filament_notes = ""
|
||||
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_retract_before_travel = nil
|
||||
filament_retract_before_travel = 3
|
||||
filament_retract_before_wipe = nil
|
||||
filament_retract_layer_change = nil
|
||||
filament_retract_length = 0
|
||||
filament_retract_lift = nil
|
||||
filament_retract_lift = 0
|
||||
filament_retract_lift_above = nil
|
||||
filament_retract_lift_below = nil
|
||||
filament_retract_restart_extra = nil
|
||||
filament_retract_speed = nil
|
||||
filament_settings_id = ""
|
||||
filament_soluble = 0
|
||||
filament_spool_weight = 0
|
||||
filament_toolchange_delay = 0
|
||||
filament_type = FLEX
|
||||
filament_unload_time = 0
|
||||
filament_unloading_speed = 90
|
||||
filament_unloading_speed_start = 100
|
||||
filament_vendor = Generic
|
||||
filament_vendor = SainSmart
|
||||
filament_wipe = 0
|
||||
first_layer_bed_temperature = 50
|
||||
first_layer_temperature = 240
|
||||
inherits = Generic FLEX
|
||||
max_fan_speed = 50
|
||||
min_fan_speed = 10
|
||||
min_print_speed = 10
|
||||
slowdown_below_layer_time = 20
|
||||
first_layer_temperature = 230
|
||||
full_fan_speed_layer = 6
|
||||
inherits = SainSmart TPU
|
||||
max_fan_speed = 80
|
||||
min_fan_speed = 80
|
||||
min_print_speed = 15
|
||||
slowdown_below_layer_time = 10
|
||||
start_filament_gcode = "M900 K0"
|
||||
temperature = 240
|
||||
temperature = 230
|
||||
57
filament/Fiberflex 30D.ini
Normal file
57
filament/Fiberflex 30D.ini
Normal file
@ -0,0 +1,57 @@
|
||||
# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-02-13 at 19:55:49 UTC
|
||||
bed_temperature = 50
|
||||
bridge_fan_speed = 100
|
||||
compatible_printers =
|
||||
compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model!="MK2SMM" and printer_model!="MINI" and num_extruders==1 && ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material)
|
||||
compatible_prints =
|
||||
compatible_prints_condition =
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 4
|
||||
end_filament_gcode = "; Filament-specific end gcode"
|
||||
extrusion_multiplier = 1.05
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 100
|
||||
filament_colour = #F9F06B
|
||||
filament_cooling_final_speed = 3.4
|
||||
filament_cooling_initial_speed = 2.2
|
||||
filament_cooling_moves = 4
|
||||
filament_cost = 32.99
|
||||
filament_density = 1.21
|
||||
filament_deretract_speed = 25
|
||||
filament_diameter = 1.75
|
||||
filament_load_time = 0
|
||||
filament_loading_speed = 28
|
||||
filament_loading_speed_start = 3
|
||||
filament_max_volumetric_speed = 2.5
|
||||
filament_minimal_purge_on_wipe_tower = 15
|
||||
filament_notes = ""
|
||||
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_retract_before_travel = 3
|
||||
filament_retract_before_wipe = nil
|
||||
filament_retract_layer_change = nil
|
||||
filament_retract_length = 1
|
||||
filament_retract_lift = 0
|
||||
filament_retract_lift_above = nil
|
||||
filament_retract_lift_below = nil
|
||||
filament_retract_restart_extra = nil
|
||||
filament_retract_speed = nil
|
||||
filament_settings_id = ""
|
||||
filament_soluble = 0
|
||||
filament_spool_weight = 0
|
||||
filament_toolchange_delay = 0
|
||||
filament_type = FLEX
|
||||
filament_unload_time = 0
|
||||
filament_unloading_speed = 90
|
||||
filament_unloading_speed_start = 100
|
||||
filament_vendor = SainSmart
|
||||
filament_wipe = 0
|
||||
first_layer_bed_temperature = 50
|
||||
first_layer_temperature = 210
|
||||
full_fan_speed_layer = 6
|
||||
inherits = SainSmart TPU
|
||||
max_fan_speed = 70
|
||||
min_fan_speed = 50
|
||||
min_print_speed = 15
|
||||
slowdown_below_layer_time = 10
|
||||
start_filament_gcode = "M900 K0"
|
||||
temperature = 210
|
||||
@ -1,43 +1,52 @@
|
||||
# generated by PrusaSlicer 2.3.0+linux-x64-GTK3 on 2021-05-03 at 14:23:00 UTC
|
||||
# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-02-11 at 22:28:20 UTC
|
||||
avoid_crossing_perimeters = 1
|
||||
avoid_crossing_perimeters_max_detour = 0
|
||||
bottom_fill_pattern = rectilinear
|
||||
bottom_solid_layers = 3
|
||||
bottom_solid_min_thickness = 0
|
||||
bottom_fill_pattern = monotonic
|
||||
bottom_solid_layers = 4
|
||||
bottom_solid_min_thickness = 0.5
|
||||
bridge_acceleration = 1000
|
||||
bridge_angle = 0
|
||||
bridge_flow_ratio = 0.95
|
||||
bridge_speed = 15
|
||||
brim_separation = 0.1
|
||||
brim_type = outer_only
|
||||
brim_width = 0
|
||||
clip_multipart_objects = 1
|
||||
compatible_printers =
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
|
||||
complete_objects = 0
|
||||
default_acceleration = 1000
|
||||
dont_support_bridges = 1
|
||||
draft_shield = 0
|
||||
elefant_foot_compensation = 0
|
||||
dont_support_bridges = 0
|
||||
draft_shield = disabled
|
||||
elefant_foot_compensation = 0.2
|
||||
ensure_vertical_shell_thickness = 1
|
||||
external_perimeter_extrusion_width = 0.45
|
||||
external_perimeter_speed = 15
|
||||
external_perimeters_first = 0
|
||||
extra_perimeters = 0
|
||||
extruder_clearance_height = 25
|
||||
extruder_clearance_height = 20
|
||||
extruder_clearance_radius = 45
|
||||
extrusion_width = 0.45
|
||||
fill_angle = 45
|
||||
fill_density = 10%
|
||||
fill_pattern = rectilinear
|
||||
first_layer_acceleration = 1000
|
||||
fill_density = 15%
|
||||
fill_pattern = gyroid
|
||||
first_layer_acceleration = 800
|
||||
first_layer_acceleration_over_raft = 0
|
||||
first_layer_extrusion_width = 0.42
|
||||
first_layer_height = 0.2
|
||||
first_layer_speed = 15
|
||||
first_layer_speed = 20
|
||||
first_layer_speed_over_raft = 30
|
||||
fuzzy_skin = none
|
||||
fuzzy_skin_point_dist = 0.8
|
||||
fuzzy_skin_thickness = 0.3
|
||||
gap_fill_enabled = 1
|
||||
gap_fill_speed = 15
|
||||
gcode_comments = 0
|
||||
gcode_label_objects = 1
|
||||
infill_acceleration = 1250
|
||||
infill_anchor = 600%
|
||||
infill_anchor_max = 50
|
||||
gcode_resolution = 0.0125
|
||||
infill_acceleration = 1000
|
||||
infill_anchor = 2.5
|
||||
infill_anchor_max = 12
|
||||
infill_every_layers = 1
|
||||
infill_extruder = 1
|
||||
infill_extrusion_width = 0.45
|
||||
@ -45,7 +54,7 @@ infill_first = 0
|
||||
infill_only_where_needed = 0
|
||||
infill_overlap = 25%
|
||||
infill_speed = 20
|
||||
inherits =
|
||||
inherits = 0.20mm QUALITY @MK3
|
||||
interface_shells = 0
|
||||
ironing = 0
|
||||
ironing_flowrate = 15%
|
||||
@ -56,11 +65,12 @@ layer_height = 0.2
|
||||
max_print_speed = 200
|
||||
max_volumetric_speed = 0
|
||||
min_skirt_length = 4
|
||||
notes = PROFILE_TPU
|
||||
mmu_segmented_region_max_width = 0
|
||||
notes =
|
||||
only_retract_when_crossing_perimeters = 0
|
||||
ooze_prevention = 0
|
||||
output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
|
||||
overhangs = 0
|
||||
overhangs = 1
|
||||
perimeter_acceleration = 800
|
||||
perimeter_extruder = 1
|
||||
perimeter_extrusion_width = 0.45
|
||||
@ -68,52 +78,65 @@ perimeter_speed = 15
|
||||
perimeters = 2
|
||||
post_process =
|
||||
print_settings_id =
|
||||
raft_contact_distance = 0.2
|
||||
raft_expansion = 1.5
|
||||
raft_first_layer_density = 90%
|
||||
raft_first_layer_expansion = 3
|
||||
raft_layers = 0
|
||||
resolution = 0
|
||||
seam_position = aligned
|
||||
seam_position = nearest
|
||||
single_extruder_multi_material_priming = 0
|
||||
skirt_distance = 3
|
||||
skirt_height = 1
|
||||
skirts = 2
|
||||
skirt_distance = 5
|
||||
skirt_height = 3
|
||||
skirts = 1
|
||||
slice_closing_radius = 0.049
|
||||
slicing_mode = regular
|
||||
small_perimeter_speed = 15
|
||||
solid_infill_below_area = 0
|
||||
solid_infill_every_layers = 0
|
||||
solid_infill_extruder = 1
|
||||
solid_infill_extrusion_width = 0.45
|
||||
solid_infill_speed = 15
|
||||
solid_infill_speed = 20
|
||||
spiral_vase = 0
|
||||
standby_temperature_delta = -5
|
||||
support_material = 0
|
||||
support_material_angle = 0
|
||||
support_material_auto = 1
|
||||
support_material_bottom_contact_distance = 0
|
||||
support_material_bottom_interface_layers = 0
|
||||
support_material_buildplate_only = 0
|
||||
support_material_contact_distance = 0.1
|
||||
support_material_closing_radius = 2
|
||||
support_material_contact_distance = 0.2
|
||||
support_material_enforce_layers = 0
|
||||
support_material_extruder = 0
|
||||
support_material_extrusion_width = 0.35
|
||||
support_material_interface_contact_loops = 0
|
||||
support_material_interface_extruder = 0
|
||||
support_material_interface_layers = 2
|
||||
support_material_interface_pattern = rectilinear
|
||||
support_material_interface_spacing = 0.2
|
||||
support_material_interface_speed = 100%
|
||||
support_material_interface_speed = 80%
|
||||
support_material_pattern = rectilinear
|
||||
support_material_spacing = 2
|
||||
support_material_speed = 0
|
||||
support_material_speed = 40
|
||||
support_material_style = grid
|
||||
support_material_synchronize_layers = 0
|
||||
support_material_threshold = 55
|
||||
support_material_threshold = 50
|
||||
support_material_with_sheath = 0
|
||||
support_material_xy_spacing = 50%
|
||||
support_material_xy_spacing = 60%
|
||||
thick_bridges = 0
|
||||
thin_walls = 0
|
||||
threads = 24
|
||||
top_fill_pattern = rectilinear
|
||||
top_fill_pattern = monotonic
|
||||
top_infill_extrusion_width = 0.4
|
||||
top_solid_infill_speed = 15
|
||||
top_solid_layers = 3
|
||||
top_solid_min_thickness = 0
|
||||
top_solid_infill_speed = 20
|
||||
top_solid_layers = 6
|
||||
top_solid_min_thickness = 0.7
|
||||
travel_speed = 180
|
||||
travel_speed_z = 12
|
||||
wipe_tower = 1
|
||||
wipe_tower_bridging = 10
|
||||
wipe_tower_brim_width = 2
|
||||
wipe_tower_no_sparse_layers = 0
|
||||
wipe_tower_rotation_angle = 0
|
||||
wipe_tower_width = 60
|
||||
@ -1,114 +0,0 @@
|
||||
# generated by PrusaSlicer 2.2.0+linux-x64 on 2020-10-18 at 14:54:12 UTC
|
||||
avoid_crossing_perimeters = 1
|
||||
bottom_fill_pattern = rectilinear
|
||||
bottom_solid_layers = 3
|
||||
bottom_solid_min_thickness = 0
|
||||
bridge_acceleration = 1000
|
||||
bridge_angle = 0
|
||||
bridge_flow_ratio = 0.95
|
||||
bridge_speed = 15
|
||||
brim_width = 0
|
||||
clip_multipart_objects = 1
|
||||
compatible_printers =
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
|
||||
complete_objects = 0
|
||||
default_acceleration = 1000
|
||||
dont_support_bridges = 1
|
||||
draft_shield = 0
|
||||
elefant_foot_compensation = 0
|
||||
ensure_vertical_shell_thickness = 1
|
||||
external_perimeter_extrusion_width = 0.45
|
||||
external_perimeter_speed = 15
|
||||
external_perimeters_first = 0
|
||||
extra_perimeters = 0
|
||||
extruder_clearance_height = 25
|
||||
extruder_clearance_radius = 45
|
||||
extrusion_width = 0.45
|
||||
fill_angle = 45
|
||||
fill_density = 10%
|
||||
fill_pattern = rectilinear
|
||||
first_layer_acceleration = 1000
|
||||
first_layer_extrusion_width = 0.42
|
||||
first_layer_height = 0.2
|
||||
first_layer_speed = 15
|
||||
gap_fill_speed = 15
|
||||
gcode_comments = 0
|
||||
gcode_label_objects = 1
|
||||
infill_acceleration = 1250
|
||||
infill_every_layers = 1
|
||||
infill_extruder = 1
|
||||
infill_extrusion_width = 0.45
|
||||
infill_first = 0
|
||||
infill_only_where_needed = 0
|
||||
infill_overlap = 25%
|
||||
infill_speed = 20
|
||||
inherits =
|
||||
interface_shells = 0
|
||||
layer_height = 0.25
|
||||
max_print_speed = 200
|
||||
max_volumetric_speed = 0
|
||||
min_skirt_length = 4
|
||||
notes = PROFILE_TPU
|
||||
only_retract_when_crossing_perimeters = 0
|
||||
ooze_prevention = 0
|
||||
output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
|
||||
overhangs = 0
|
||||
perimeter_acceleration = 800
|
||||
perimeter_extruder = 1
|
||||
perimeter_extrusion_width = 0.45
|
||||
perimeter_speed = 15
|
||||
perimeters = 2
|
||||
post_process =
|
||||
print_settings_id =
|
||||
raft_layers = 0
|
||||
resolution = 0
|
||||
seam_position = aligned
|
||||
single_extruder_multi_material_priming = 0
|
||||
skirt_distance = 3
|
||||
skirt_height = 1
|
||||
skirts = 2
|
||||
slice_closing_radius = 0.049
|
||||
small_perimeter_speed = 15
|
||||
solid_infill_below_area = 0
|
||||
solid_infill_every_layers = 0
|
||||
solid_infill_extruder = 1
|
||||
solid_infill_extrusion_width = 0.45
|
||||
solid_infill_speed = 15
|
||||
spiral_vase = 0
|
||||
standby_temperature_delta = -5
|
||||
support_material = 0
|
||||
support_material_angle = 0
|
||||
support_material_auto = 1
|
||||
support_material_buildplate_only = 0
|
||||
support_material_contact_distance = 0.1
|
||||
support_material_enforce_layers = 0
|
||||
support_material_extruder = 0
|
||||
support_material_extrusion_width = 0.35
|
||||
support_material_interface_contact_loops = 0
|
||||
support_material_interface_extruder = 0
|
||||
support_material_interface_layers = 2
|
||||
support_material_interface_spacing = 0.2
|
||||
support_material_interface_speed = 100%
|
||||
support_material_pattern = rectilinear
|
||||
support_material_spacing = 2
|
||||
support_material_speed = 0
|
||||
support_material_synchronize_layers = 0
|
||||
support_material_threshold = 55
|
||||
support_material_with_sheath = 0
|
||||
support_material_xy_spacing = 50%
|
||||
thin_walls = 0
|
||||
threads = 4
|
||||
top_fill_pattern = rectilinear
|
||||
top_infill_extrusion_width = 0.4
|
||||
top_solid_infill_speed = 15
|
||||
top_solid_layers = 3
|
||||
top_solid_min_thickness = 0
|
||||
travel_speed = 180
|
||||
wipe_tower = 1
|
||||
wipe_tower_bridging = 10
|
||||
wipe_tower_no_sparse_layers = 0
|
||||
wipe_tower_rotation_angle = 0
|
||||
wipe_tower_width = 60
|
||||
wipe_tower_x = 170
|
||||
wipe_tower_y = 125
|
||||
xy_size_compensation = 0
|
||||
Loading…
Reference in New Issue
Block a user