2023.04.05 00:57

print/STRONG - 0.20mm.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-03-11 at 23:24:43 UTC
+# generated by PrusaSlicer 2.5.0+linux-x64-GTK3 on 2023-04-04 at 11:49:40 UTC
 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters_max_detour = 0
 bottom_fill_pattern = monotonic
@@ -29,7 +29,7 @@ extruder_clearance_radius = 45
 extrusion_width = 0.45
 fill_angle = 45
 fill_density = 25%
-fill_pattern = gyroid
+fill_pattern = cubic
 first_layer_acceleration = 800
 first_layer_acceleration_over_raft = 0
 first_layer_extrusion_width = 0.42
@@ -44,6 +44,7 @@ gap_fill_speed = 40
 gcode_comments = 0
 gcode_label_objects = 1
 gcode_resolution = 0.0125
+gcode_substitutions = 
 infill_acceleration = 1000
 infill_anchor = 2.5
 infill_anchor_max = 12
@@ -63,7 +64,11 @@ ironing_speed = 15
 ironing_type = top
 layer_height = 0.2
 max_print_speed = 200
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 0
+min_bead_width = 85%
+min_feature_size = 25%
 min_skirt_length = 4
 mmu_segmented_region_max_width = 0
 notes = 
@@ -74,6 +79,7 @@ overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.45
+perimeter_generator = arachne
 perimeter_speed = 45
 perimeters = 5
 post_process = 
@@ -134,6 +140,10 @@ top_solid_layers = 5
 top_solid_min_thickness = 0.7
 travel_speed = 180
 travel_speed_z = 12
+wall_distribution_count = 1
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 100%
 wipe_tower = 1
 wipe_tower_bridging = 10
 wipe_tower_brim_width = 2