Remove kodak

printer/kodak - kodak-config-bundle.ini

@@ -1,85 +0,0 @@
-# generated by PrusaSlicer 2.7.1+linux-x64-GTK3 on 2024-01-28 at 22:24:38 UTC
-autoemit_temperature_commands = 0
-bed_custom_model = /home/pgrondek/Downloads/kodak/kodak-bed-v2.stl
-bed_custom_texture = /home/pgrondek/Downloads/kodak/texture.png
-bed_shape = -40x-10,220x-10,220x220,-40x220
-before_layer_gcode = 
-between_objects_gcode = 
-binary_gcode = 0
-color_change_gcode = M600
-cooling_tube_length = 5
-cooling_tube_retraction = 91.5
-default_filament_profile = 
-default_print_profile = 
-deretract_speed = 0,0
-end_gcode = G1 Z{min(max_layer_z+49, max_print_height)} E-30 F720\n; park\nG28 X Y\n\nM104 T0 S0\nM104 T1 S0\nM140 S0
-extra_loading_move = -2
-extruder_colour = #62A0EA;#8FF0A4
-extruder_offset = 0x0,0x0
-gcode_flavor = klipper
-high_current_on_filament_swap = 0
-host_type = prusalink
-inherits = 
-layer_gcode = 
-machine_limits_usage = time_estimate_only
-machine_max_acceleration_e = 10000,5000
-machine_max_acceleration_extruding = 5500,5500
-machine_max_acceleration_retracting = 5500,5500
-machine_max_acceleration_travel = 1500,1250
-machine_max_acceleration_x = 5500,5500
-machine_max_acceleration_y = 5500,5500
-machine_max_acceleration_z = 50,50
-machine_max_feedrate_e = 120,120
-machine_max_feedrate_x = 200,200
-machine_max_feedrate_y = 200,200
-machine_max_feedrate_z = 30,30
-machine_max_jerk_e = 0,0
-machine_max_jerk_x = 0,0
-machine_max_jerk_y = 0,0
-machine_max_jerk_z = 0,0
-machine_min_extruding_rate = 0,0
-machine_min_travel_rate = 0,0
-max_layer_height = 0,0
-max_print_height = 225
-min_layer_height = 0.07,0.07
-nozzle_diameter = 0.4,0.4
-parking_pos_retraction = 92
-pause_print_gcode = M601
-print_host = 
-printer_model = 
-printer_notes = 
-printer_settings_id = 
-printer_technology = FFF
-printer_variant = 
-printer_vendor = 
-printhost_apikey = 
-printhost_cafile = 
-remaining_times = 1
-retract_before_travel = 2,2
-retract_before_wipe = 0%,0%
-retract_layer_change = 0,0
-retract_length = 2,2
-retract_length_toolchange = 10,10
-retract_lift = 0,0
-retract_lift_above = 0,0
-retract_lift_below = 0,0
-retract_restart_extra = 0,0
-retract_restart_extra_toolchange = 0,0
-retract_speed = 40,40
-silent_mode = 1
-single_extruder_multi_material = 0
-start_gcode = PRINT_START T0_USED={ is_extruder_used[0] } T1_USED={ is_extruder_used[1] } T0_TARGET_TEMPERATURE={ first_layer_temperature[0] } T1_TARGET_TEMPERATURE={ first_layer_temperature[1] } BED_TEMPERATURE=[first_layer_bed_temperature]
-template_custom_gcode = 
-thumbnails = 640x360/PNG
-thumbnails_format = PNG
-toolchange_gcode = ; Change Tool[previous_extruder] -> Tool[next_extruder] (layer [layer_num])\n\nM117 tool change [previous_extruder] -> [next_extruder]\n\n; moving up\nG1 Z{layer_z + 5} F5000\n\nT{next_extruder} HOT=1 RETRACT=1\n\n{if layer_num == 0 }\nM109 T{next_extruder} S{first_layer_temperature[next_extruder]}\n{else}\nM109 T{next_extruder} S{temperature[next_extruder]}\n{endif}\n\n; moving back down\nG1 Z{layer_z}\n
-travel_lift_before_obstacle = 0,0
-travel_max_lift = 0,0
-travel_ramping_lift = 0,0
-travel_slope = 0,0
-use_firmware_retraction = 0
-use_relative_e_distances = 0
-use_volumetric_e = 0
-variable_layer_height = 1
-wipe = 0,0
-z_offset = 0