* Add toggle_visible action
* Add set_visible and set_invisible actions
* Rename toggle_visible method to match
`action_toggle_visible` -> `action_toggle_visibility`
Matches with `EVENT_TOGGLE_VISIBILITY`
* Update CHANGELOG
* Revert #2320 IPC commands
IPC commands are no longer necessary now that the actions are
implemented. Changed some method permissions as well to reflect this.
* Add logging and change action names
- `module_toggle`
- `module_show`
- `module_hide`
Delineate common actions to all modules with a `module_` prefix (for
future actions too)
* Update documentation
XCB_BACK_PIXMAP_PARENT_RELATIVE requires that the client has the same
depth as the tray window.
There was an issue with dropbox having a depth of 32 and the tray window
having a depth of 24 that caused the configuration of the icon to fail.
It would then be displayed outside of the bar because the catch block
was not hit (different exception).
We now just don't configure XCB_CW_BACK_PIXMAP. This seems to work and
is also what stalonetray does.
This does not fix the issue with dropbox having an arbitrary background.
Fixes#1679Fixes#2430
* Add wm-restack=generic to lower polybar to the bottom of the stack
Previously wm-restack only supported bspwm and i3. Both have a special
top-level window that polybar detects and places itself directly above.
This patch adds wm-restack=generic which simply lowers polybar to the
very bottom of the stack. This option was tested and confirmed to work
with xmonad which doesn't have a special top-level window and therefore
doesn't require special handling like bspwm and i3.
Fixes#2205
* Update src/components/bar.cpp
Co-authored-by: Patrick Ziegler <p.ziegler96@gmail.com>
While it shouldn't happen with compliant WMs, it was possibe to crash
polybar with _NET_CURRENT_DESKTOP >= _NET_NUMBER_OF_DESKTOPS and this
should not be possible.
Includes polybar/xpp#31
Fixes#2398
When `pin-workspaces` is set to true using `show-urgent` will show
urgent workspaces on the bar even when the workspace is not associated
with the current monitor.
The renderer now only stores the positions of the actions because that
is specific to the renderer and because the actual position can only be
finalized after all the rendering is done because intitially the
positions are relative to the alignment and not the bar.
The variables storing the current colors, attribute activations and font
were only used in a single place and can easily also be read from the
context.
This allows us to remove a lot of the state of the renderer.
* add reverse-scroll option for xworkspaces module
* move use of reverse-scroll option to when producing scroll action
* documented xworkspaces reverse-scroll option in changelog
Add a config parser method which, for now, deals only with escaping the
literal backslash character and logs an error message to inform the user
of the coming change.
The error message includes a properly escaped value for the user.
As a result of introducing an escape character('\'):
- Warn the user of any unescaped backslashes, as they will not be
treated as a literal character in the future
- For now, still treat a single backslash as a literal character
- Treat two consecutive backslashes as a single properly escaped
literal backslash
Also:
- Add documentation about the escape character to polybar(5) manpage
- Add info about the escape character to changelog
- Add testcases for ParseLineKeyTest
- Add new test ParseEscapedValueTest
Resolves: First step in #2354
Improve value parsing
- Take value arg in as an rvalue reference and move parsed value back
- Remove unnecessary if statement
- Rename function
- Improve error message
- Improve function description
- Format
Add escape character documentation to manpages
Add information about the escape character to the polybar(5) manpage.
Add info about the esacape character to changelog
Add test cases for ParseLineKeyTest
Fix ParseLineKeyTest test cases
Also make config parser method parse_escaped_value private.
Add tests for escaped_value_parser method
Also remove unsued include statement
Simplify parse_escaped_value in config_parser
Remove unnecessary escaped value generation, so we do not have to keep
track of index differences.
Fix ParseEscapedValueTest test cases
Fix parse_escaped_value
Add more test cases for ParseLineKeyTest
Update CHANGELOG.md
Co-authored-by: Patrick Ziegler <p.ziegler96@gmail.com>
Adress review
- Adjust documentation
- Small code changes
Improve parse_escaped_value
Add initial support for an escape character
Add a config parser method which, for now, deals only with escaping the
literal backslash character and logs an error message to inform the user
of the coming change.
The error message includes a properly escaped value for the user.
As a result of introducing an escape character('\'):
- Warn the user of any unescaped backslashes, as they will not be
treated as a literal character in the future
- For now, still treat a single backslash as a literal character
- Treat two consecutive backslashes as a single properly escaped
literal backslash
Resolves: First step in #2354
Improve value parsing
- Take value arg in as an rvalue reference and move parsed value back
- Remove unnecessary if statement
- Rename function
- Improve error message
- Improve function description
- Format
Add info about the esacape character to changelog
Add test cases for ParseLineKeyTest
Fix ParseLineKeyTest test cases
Also make config parser method parse_escaped_value private.
Add tests for escaped_value_parser method
Also remove unsued include statement
Simplify parse_escaped_value in config_parser
Remove unnecessary escaped value generation, so we do not have to keep
track of index differences.
Fix ParseEscapedValueTest test cases
Add more test cases for ParseLineKeyTest
Adress review
- Adjust documentation
- Small code changes
Remove duplicate testcase from ParseLineKeyTest
Add initial support for an escape character
Add a config parser method which, for now, deals only with escaping the
literal backslash character and logs an error message to inform the user
of the coming change.
The error message includes a properly escaped value for the user.
As a result of introducing an escape character('\'):
- Warn the user of any unescaped backslashes, as they will not be
treated as a literal character in the future
- For now, still treat a single backslash as a literal character
- Treat two consecutive backslashes as a single properly escaped
literal backslash
Resolves: First step in #2354
Improve value parsing
- Take value arg in as an rvalue reference and move parsed value back
- Remove unnecessary if statement
- Rename function
- Improve error message
- Improve function description
- Format
Fix ParseLineKeyTest test cases
Also make config parser method parse_escaped_value private.
Remove duplicate testcase from ParseLineKeyTest
* module: Implement proof of concept action router
Action implementation inside module becomes much cleaner because each
module just registers action names together with a callback (pointer to
member function) and the action router does the rest.
* Make input function final
This forces all modules to use the action router
* modules: Catch exceptions in action handlers
* Use action router for all modules
* Use action_ prefix for function names
The mpd module's 'stop' action overwrote the base module's stop function
which caused difficult to debug behavior.
To prevent this in the future we now prefix each function that is
responsible for an action with 'action_'
* Cleanup
* actions: Throw exception when re-registering action
Action names are unique inside modules. Unfortunately there is no way to
ensure this statically, the next best thing is to crash the module and
let the user know that this is a bug.
* Formatting
* actions: Ignore data for actions without data
This is the same behavior as before.
* action_router: Write tests
Modules can now also be shown and hidden using ipc commands:
$ polybar-msg [-p PID] cmd hide.mymodule # Hides module mymodule
$ polybar-msg [-p PID] cmd show.mymodule # Shows module mymodule
$ polybar-msg [-p PID] cmd toggle.mymodule # Toggles visibility of mymodule
* Hopefully implement visibility checking
* Implement hide command
* Implement `show` and `toggle` commands
* Refactor and add some logging
* Run style checks and update CHANGELOG
* Get around unused parameter warnings
* Change `set_visible` to return nothing
* Make errors more informative
Co-authored-by: Patrick Ziegler <p.ziegler96@gmail.com>
* Update bar when changing module visibility
- Called in the module to maintain dependence on the signal emitter
- Update CHANGELOG to make changes more verbose
* wrong var
* Update include/modules/unsupported.hpp
Co-authored-by: Patrick Ziegler <p.ziegler96@gmail.com>
Co-authored-by: Patrick Ziegler <p.ziegler96@gmail.com>
The intention was to remove tags that won't have an effect and join
together consecutive tags.
However the patterns used can just as well appear in regular text, so
this can replace characters inside user defined text and not just
formatting tags.
Fixes#2331
Each major target of polybar can now be enabled/disabled while
configuring (even polybar itself).
The cmake code specific to each target will only run if the target is
enabled.
This allows us to for example just build the documentation without
having to run all the cmake code related to compilation or having the
polybar dependencies installed (other than sphinx).
* Added .ini extension check to default config
* Added change to changelog and man page
* Added change to changelog and man page
* removed .vscode folder
* removed new lines in changelog
They were required before, but could technically be deactived (the
compilation would fail, but configuration was possible).
The WITH_XRANDR and WITH_XCOMPOSITE now no longer appear in the cmake
part. It still appears in the source code, but is always set to 1
Fixes#1536
* Add variant support to xkeyboard layout label
Solves #316
* Run style checks, I guess?
* Add comment
* Return nothing if there is no variant
* Update CHANGELOG
* Fix xkeyboard module spacing between the layout and indicators when indicators are empty.
* Simplify the empty label check.
* Remove permanently enabled SCROLL_LOCK, sorry.
* Another mistake.
* Update src/modules/xkeyboard.cpp
Co-authored-by: Patrick Ziegler <p.ziegler96@gmail.com>
* Update src/modules/xkeyboard.cpp
Co-authored-by: Patrick Ziegler <p.ziegler96@gmail.com>
* Update.
* Fix xkeyboard module spacing between the layout and indicators, when indicators are empty. And fix the spacing between indicators when some are empty.
* Add issue #2292 to fixed.
* Update CHANGELOG.md
Co-authored-by: Filip Banák <6111455-Filip62@users.noreply.gitlab.com>
Co-authored-by: Patrick Ziegler <p.ziegler96@gmail.com>
* refactor(color): Use enum class for color type
* Add testcases for tag parser
* Make tag parser a pull-style parser
Being able to parse single elements at a time gives us more fine-grained
error messages, we can also parse as much as possible and only stop
after an exception.
* fix(color): Parser did not check for invalid chars
* tag parser: First full implementation
* tag parser: Fix remaining failing tests
* tag parser: Replace old parser
* tag parser: Treat alignment as formatting tag
Makes the structure less complex and the alignment tags really are
formatting tags, they are structurally no different from the %{R} tag.
* tag parser: Cleanup type definitions
All type definitions for tags now live in tags/types.hpp, the parser.hpp
only contains the definitions necessary for actually calling the parser,
this shouldn't be included in many places (only places that actually do
parsing). But many places need the definitions for the tags themselves.
* Rename components/parser to tags/dispatch
* tag parser: Cleanup
* Add changelog
Since the forked processes are still our children, we need to wait on
them, otherwise they become zombie processes.
We now fork twice, let the first fork immediately return and wait on it.
This reparents the second fork, which runs the actual code, to the init
process which then collects it.
Ref #770
For some reason when passing some non-const strings to convert, the
convert(T&& arg) method was used instead of the one specialized for
strings.
This caused an error in clang because you can't pass objects with
non-trivial types to varargs functions.
The best solution I found was to just add a specialized function for
non-const strings.
This was a backwards-incompatible change introduced in #2199, however it
was caused because `module_formatter.has` throws an exception when the
format doesn't exist instead of just returning false.
Fixes#2262
Ref #2199
If two WM events arrive withing 25ms of one-another, the second one does
not trigger a bar update.
The module state is still correct, it is just not reflected in the bar.
This somehow caused updates being swallowed in fluxbox, but only after
PR #882 was merged, even though that 25ms restriction existed long
before that.
Fixes#2272
Since 3.5.0, we use m_interval for a modulo operation, this crashes the
bar if the interval is 0. A non-positive interval shouldn't be allowed
anyway, so we now throw an exception in that case.
Fixes#2273
Pre 3.5.0, any key starting with 'inherit' was treated as an inherit
directive. This allowed for multiple inheritance even though it was
never inteded in that way.
3.5.0 removed that bug/feature by doing a strict check against 'inherit'
It seems people were relying on this behavior, so we are adding it back.
However multiple inheritance with multiple keys is also deprecated in
favor of the `inherit` key now supporting multiple space separated
sections.
This is because the config doesn't have a key order, but inheritance
does depend on the order the different section keys are copied over (if
multiple inherited sections define the same key).
Fixes#2269
* [Temperature, Ramp] fix wrong icon for temperatures near base and warn temps
* [Temperature, Ramp] fix wrong icon for temperatures near base and warn temps
* Fix minor error
* Added WARN state for cpu module
* Implement WARN state for CPU, Memory modules, working on fs module
* Implement WARN state for fs module
* Simplify WARN state implementation for cpu and memory
* explicitly check percentage in get_by_percentage_with_borders
* Fixed silly error
* implement warn state on battery module, standardize the implementation on other modules
* minor fixes
* fix annoying error
* use more intuitive param name
* Fix percentage with borders bug
* Make requested changes
Hide the effect of warn states when unused
* Backward Compat: use no format instead of fallback label
* Reformat
* Refactor
* Reformat
* Reformat: convert tabs to spaces
* Reformat
more granular units need lower precision, while less granular need
higher precision. assume sane default of:
unit | precision
KB | 0
MB | 1
GB | 2
Co-authored-by: Patrick Ziegler <p.ziegler96@gmail.com>
It was not quite clear how try_apply_alpha should behave if the given
color was not ALPHA_ONLY. The implementation just returned 'this'.
However, the build relied on it returning the given color.
This broke all bg and fg settings in the entire bar.
To clear this up, we switch this around take the alpha channel of 'this'
and also return 'this' if it isn't ALPHA_ONLY.
Fixes#2255
New config option `speed-unit = B/s` will be used to suffix the upload and download speeds.
* mod::network: udspeed-unit to set network speed unit suffix
* Changed udspeed-unit to speed-unit
Shell commands triggered from action tags used to block polybar until
they finished.
Since we are not actually interested in the output of the commands, it
makes sense to run them completely detached from polybar and have
polybar not block when executing these commands.
Now the spawned child processes no longer get killed when polybar
exits. This is fine because polybar is not responsible for these
processes since they were explicitly started by the user through click
commands.
Ref: #770
Ref: #1680
The intent is for every color to be stored in a rgba instance
The rgba class now stores the color in a 32 bit integer to save space
This also removes the unused class rgb and moves everything else into a
cpp file.
Many functions also had weird template parameters. For example
alpha_channel<unsigned short int> would give a 2 byte number with the
alpha channel byte in both bytes.
color_util::hex would return a hex string with alpha channel if unsigned
short int was given and without if unsigned char was given. Even more
curiously those parameters were passed to *_channel and the result
nevertheless truncated to 8bits.
Only modules can now be action handlers.
This also slightly simplifies the controller because we don't need to
keep track of input handlers, we can just use the module list.
The next action should always select the next workspace, the same for
prev.
reverse-scroll should be directly used when setting the scroll actions.
This changes the behavior of `prev` and `next` actions in the i3 and
bspwm module.
But I don't think the impact will be significant and the old behavior
was misleading anyway.
Some actions have data attached (e.g. xworkspaces-focus=N), the
forwarding logic now matches the keys in the legacy_actions map as
prefixes and everything afterwards is considered additional data and
appended to the new action string.
All modules now expose their actions as public static constants
Issues: The menu module no longer closes when an item is clicked (before
it would intercept any executed command and look if it matches one of
its exec commands)
All the information about which action has to be delivered to which
module is kept in once place to make cleanup easier once the deprecated
actions are removed.
Right now only the date module is added as a proof of concept.
This allows us to identify module by their type and it is also better to
store the module type as part of the module instead of having it
hardcoded in factory.hpp
Action strings now have the form '#MODULE#ACTION'
For example to trigger the action 'toggle' in the 'module/date' module
one would now use '%{A1:#date#toggle:}'
With this action strings can now be uniquely assigned to one module.
Fixes#1172
Before the time difference between two measurements was always an
integer number, so for intervals < 1, you would always get 0 and for any
other non-integer interval you would get skewed results.
ramp-0 is used for everything <= base-temperature and ramp-N is used for everything >= warn-temperature
* [Temperature, Ramp] fix wrong icon for temperatures near base and warn temps
* [Temperature, Ramp] fix wrong icon for temperatures near base and warn temps
* Fix minor error
* explicitly check percentage in get_by_percentage_with_borders
* Fixed silly error
* Prioritize battery full-at over state
The `full-at` option should take priority
over the charging state of the battery.
Closes#1622 (issue for Thinkpad laptops)
* Remove typo from clamp_percentage
Some devices can have "amdgpu_bl1" or "amdgpu_bl2", but the code hardcoded in the value "amdgpu_bl0". This change tests based on the first characters: "amdgpu_bl".
If an input is enqueued as a response to an input, the new input will be
swallowed because it will likely be enqueued less than 30ms after the
original event.
This is not something that is an issue right now but it is required to
finish #1907 where, in order to close the menu after a click, the menu
module gets an exec action that closes the menu and adds a command to
the event queue.
The setting also isn't too useful since it will just break polybar input
handling if inputs arrive too fast instead of (possibly) slowing down
the bar.
Before the module would just try to evenly distribute desktops
(workspaces) among the viewports.
But since `_NET_DESKTOP_VIEWPORT` actually maps desktops to viewports,
we can use that information to assign workspaces to the right viewport.
Fixes#1849Fixes#1764
It is useful for people to see what config file polybar loaded.
For debugging font issues people almost always need to check what fonts
polybar loaded, for that they need to run polybar with info logging. Now
this information is always provided. This requires an update in the font
wiki page.
A warning implies something went wrong and (possibly) the user should do
something about it. However, warnings are not always used this way.
For example:
* When a fallback value for a `${..}` reference is used, this shouldn't
produce a warning (or notice) since using fallbacks is not something
bad.
* pulse telling you that it uses the default sink because no sink was
specified also does not warrant a warning (even notice may be too
high).
* Whenever polybar shuts down it produces a "Termination signal
received..." warning. Since there isn't a more proper way to shut down
polybar, it should not produce a warning. Same argument for a
`screenchange-reload`
Before it would only reload if the size changed and even that was
reliable since the method relied on the order of the monitor list.
Now if the monitor list differs in any way (pos, dimension, primary,
output, name) a reload is issued
Because of how monitors are removed inside the loop and depending on the
monitor order a cloned monitor may be assigned a width of 0 but is never
actually removed resulting in polybar saying the bar is out of bounds
Fixes#1794
Removing monitors is not really necessary when selecting the monitor
where to render the bar or choosing the backlight. Since both monitors
occupy the same coordinates rendering can be done on both and it's
better to give people felxibility for the backlight.
Fixes#1191
Premature optimization that tried to cache monitors but the cache did
not take into account the parameter values.
The call `get_monitors(..., ..., false, true);` would get all connected
and unconncected monitors a subsequent call
`get_monitors(..., ..., true, false);` would get back the same list of
monitors even though it requested only connected monitors.
Additionally `get_monitors` is never called periodically so the
optimization really didn't help much.
The github module only authenticate by query string, and this method is deprecated:
https://developer.github.com/changes/2019-11-05-deprecated-passwords-and-authorizations-api/#authenticating-using-query-parameters
There is no reason to remove it before the method stop working, so I've made possible to the user choose which authentication method he will use:
* The parameter token remain unchanged.
* If the parameter user is passed then the module will use the not deprecated method, passing user and token on the body of the requisition. Otherwise the module will use the deprecated method.
Co-authored-by: Lucas <araujo.lucasvale@gmail.com>
Fixes#2002
If an exact match was possible, fuzzy matching could still return a
non-exact match if it appeared before the exact match in the list of
icons.
Fixes#2041
Adds `format-offline` and `label-offline`
* feat(github): offline label & fixes
* Clear label if there are no notifications and empty-notifications = false
* clang-format
Co-authored-by: Patrick Ziegler <p.ziegler96@gmail.com>
In the case where _NET_NUMBER_OF_DESKTOPS > |_NET_DESKTOP_NAMES|
the last branch of the get_desktop_names method would return a vector
with _NET_NUMBER_OF_DESKTOPS + 1 elements because we iterate until
_NET_NUMBER_OF_DESKTOPS + 1.
Fixes#1983
Functionality-wise reverts the changes from #1534
In #1907 we have decided to allow the same module to appear multiple
times (and deliver actions to all matching modules). But since that PR
will likely take longer to get merged, I want to remove the error from
polybar because the message it prints isn't really true anymore.
Before, if the command produced no output, the `m_output` field would
not have been overwritten and the old output was displayed.
But since this is an explicit trigger of the hook, the user would expect
the output to be updated to whatever the script produces (even if that
is nothing).
Ref: https://www.reddit.com/r/Polybar/comments/e9a8ww
The old code didn't really work when the right block was pushing against
the center block. Also `fixed-center` wasn't properly defined. I have
now fixed it to the following:
* `fixed-center = true`: The center block stays at the center of the bar
whenever possible. It can be pushed to the left if the right block takes
too much space and to the right if the left block takes too much space
* `fixed-center = false`: The center block will be in the middle between
the left and right block whenever possible. If there is not enough space
between those two, the center block will be directly to the right of the
left block and pushes out the right block
The issue was that it used the position of the center module to
calculate the leftmost possible position of the block. However, if the
center module is empty that position is disastrously wrong.
Fixes#591Fixes#1903
the `node` and `node_repeat` were never called with the optional
parameter add_space. And its default value is false, so the
corresponding code was never used.
I think in general it is better to just have the user of those functions
call `builder::space` when they need to instead of adding more
complexity to the `node*` functions.
* Add label minlen and alignment.
Fix build
* Update src/drawtypes/label.cpp
Co-Authored-By: infokiller <infokiller@users.noreply.github.com>
* Use existing alignment type.
* Remove redundant max_len handling in label::get.
* Fix shadowing.
* Add label alignment tests.
* Handle minlen/maxlen and alignment in same function.
Also add a test for a test case brought up in the PR discussion.
* Format files with clang-format
* Move builder::get_label_text tests into label tests
builder::get_label_text doesn't really do anything anymore
* builder: remove get_label_text
* label: Clean up label::get()
* Fix comment style.
* Set default label alignment to left.
* Update src/drawtypes/label.cpp
Co-Authored-By: Patrick Ziegler <p.ziegler96@gmail.com>
* Update include/drawtypes/label.hpp
Co-Authored-By: Patrick Ziegler <p.ziegler96@gmail.com>
None of the payload fields seem to be used. They were the only place
where EVENT_SIZE was used and why it had to be a macro (no variable
length arrays).
Since APP_VERSION is different for every commit and almost all file
include settings.hpp, the whole project has to be rebuilt for every
commit. With this, hopefully, this can be greatly reduced and only
changed files need to be rebuilt. This will also help ccache
Some people use text modules instead of the `separator` key in the bar
section to better configure the separator (colors, fonts).
Since we disallowed the same module being used multiple times in #1534,
this will now print an error message.
This should help with this a bit.
Ref #1913
Some WMs like i3 discard position information when unmapping the bar and
because of that the bar would be at the wrong position after being
remapped.
Fixes#1484
Ref: https://github.com/i3/i3/pull/3834
* refactor: Use flat module list if possible
Before if you wanted to iterate over all loaded modules you had to first
iterate over all blocks and then over their modules even if you didn't
care about alignment.
* refactor: setup modules in separate function
* controller: Print error for duplicate modules
You can't use the same name twice inside the module lists
E.g.
modules-left = a b c
modules-center = a
modules-right = b
would print an error.
We only print an error for now because we don't want to break existing
configs. But in the future this should be properly enforced.
A workspace is occupied if it is not active and there is at least one window managed by the WM (`_NET_CLIENT_LIST`) that has set `_NET_WM_DESKTOP` to that workspace.
The behavior when `_NET_WM_DESKTOP` is not set is not yet clear but this is unlikely to happen since most WMs will position windows on some desktop.
Closes#874Fixes#1444Fixes#1033
* Set Desktop OCCUPIED if a window moves there
This covers more of an edge-case. I did this first by accident, it might
vanish later on.
* Replace tracking change of WS with currently used WS
* Untrack occupied workspaces
* Track windows and their desktops in pairs
* Match type of occupied_desktops with current_desktop
Because the index needs to be matched later on, type mismatches would be non-ideal.
* Recreate the occupied desktops everytime and remove duplicates
* Readd support for moving windows to other desktops
* Use less characters to empty the vector
* Rename variable storing the desktops
* Recount windows on every occasion
This alone simplifies the management and the lookup for occupation of a
workspace
* Keep track of number of windows in every workspace
* Add debugging output that shall be removed before merging
* Remove obsolete TODO
* m_client_list should always be diff'd, since the desktop may change
Therefore we update the desktop-count tally every time the client_list
changes. It may just be a desktop-change without a change of
clients.size()...
* Add more logging-spam to understand window/desktop lifecycle
* Lock event-handler to serialize handling of events
* Fix occupied workspace counting and change to bool array
Also, performance improvements when diffing new and old client lists
* Fix crash when all clients are removed
* Conform to linter and styleguide
* Shorten conditional as it is standard enough
Since this only guards against 0-divisions, it can be shortened
without risking too much confusion down the road.
* Guard against multiple threads accessing and modifying data
Fixes#1444
Modification of internal data happens through the handle-method, while
the build-method tries to access the data structures for display. Since
some modifications clear e.g. the m_viewports, references may become
invalid between looping over them an accessing them.
The mutex should guard against this simultanuous access.
* Do not 'adopt_lock', because calls come from very different threads
To my understanding, adopt_lock has some dependency on the mutex-ownership. Since
the lock is once called from the inside (in handle) and once from the outside (in
build), there might be a problem. After brief testing, the segfaults happened fewer
times.
See #1444
* Also listen to _NET_WM_DESKTOP
In order to move a window from one desktop to another, it is sufficient
to set the desktop-property of that window. xmonad fires a lot of events
in the case of moving a window, herbstluftwm only updates the
_NET_WM_DESKTOP-atom of the window.
This change reloads the clientlist in order to correctly set the
desktop state "occupied".
* Describe need and use of mutex
It might be possible to relieve the guard in xworkspaces_module::handle,
but I am unsure about this. Since xmonad emits a lot of events on almost
every minor change, I would let the guard keep its post, avoiding
race-conditions in event-handling.
* Give temporary variables better names
* Clarify purpose of loop
About 80% of this comment are taken from
https://github.com/jaagr/polybar/pull/882#discussion_r255317363
* Remove merge-remainder
* Use a simpler method to list occupied desktops.
Co-authored-by: Jérôme Boulmier <jerome.boulmier@outlook.fr>
* Document m_clients field
While an update was forced whenever polybar was made visible, the
`m_lastinput` variable was still set to the same value as when the bar
became hidden because updates to it were prevented.
Fixes#1875
This fixes a regression introduced in
56e24992df where relative config file
paths weren't recognized because file_util::expand just added a slash
to the beginning.
That is calling `polybar -c config example` would try to load the config
file at `/config` instead of using the relative path as before.
In all other cases where expand is used this change shouldn't matter
because polybar only accepts absolute paths everyhwere else.
Theoretically this would now allow relative paths (relative to the cwd
where polybar was called) but this shouldn't used (or documented)
because that behavior will change when merging #1523 which would make
paths relative to the polybar config.
Ref #1523
Ref 56e24992df
The %{PR} tag is introduced for this. It resets all colors as well as
the activation of the underline and overline and font.
This has become necessary because we don't track what raw tags a user
injects into the formatting string and otherwise their raw tags could
bleed through.
This doesn't touch action tags because even before raw action tags
weren't being tracked. Action tags also have the requirement that they
have to be used in pairs, so closing them prematurely could break things
(for example with click actions for the entire bar)
When adding a string to the builder directly, it would parse the string
for formatting tags, delete them and readd them with the methods in the
builder that keep track of open tags so that we can properly close them
when flushing.
This parser has a bug, it parses multiple formatting tags in a single
block as a single tag, e.g.
%{F#000000 u#FFFFFF +u}
would be parsed as an `F` tag with value `#000000 u#FFFFFF +u` which is
of course wrong.
Removing the parsing step fixes this problem in the simplest way
possible. This has two benefits:
* Building of modules is sped up because we don't have to do the parsing
step in the builder and many modules use this function to add strings
from a progressbar (which already has properly closed tags).
* We don't have parser logic in two places. Until now both `parser.cpp`
and `builder.cpp` actually parsed formatting tags. This leads to a lot
of code duplication and, as we've seen, bugs.
All of the modules that use this function to add text already make sure
that they properly close formatting tags (mostly by using the builder to
generate the strings)
NOTE: This change slightly changes polybar's behavior. Raw tags (tags
added by the user through the config) can now have their effects reach
neighboring modules because the builder doesn't track and thus doesn't
close them on each flush. This can (and will) be resolved by resetting
all tags at module borders.
Fixes#1555
There really is no reason to also close over/underline tags when we have
a right margin and a non-black over/underline color.
The git blame for these lines also doesn't give us any insights as to
why it was done this way.
Using a bit vector to track the active attributes does not really give a
significant speed increase, especially for only two attributes
Checking if a syntaxtag or an attribute exists in the map just adds
unnecessary code
Was around since the first commit but no documentation why. It was only
used in the text module and doesn't appear in any public documentation,
so this doesn't break anything.
This is the next step to merge #1237 in stages.
Currently there are barely any restrictions on how the config can be
written. This causes things like config files with DOS line endings to
not be parsed properly (#1366) because polybar splits by `\n` and when
parsing section headers, it can't deal with the `\r` at the end of the
line and thus doesn't recognize any section headers.
With this PR we introduce some rules as to what characters are allowed
in section names and keys.
Note: When talking about spaces I refer to any character for which
`isspace()` returns `true`.
The rules are as follows:
* A section name or a key name cannot contain any spaces as well as any
of there characters:`"'=;#[](){}:.$\%`
* Spaces at the beginning and end of lines are always ignored when
parsing
* Comment lines start with `;` or `#` and last for the whole line. The
whole line will be ignored by the parser. You cannot start a comment at
the end of a line.
* Section headers have the following form `[HEADER_NAME]`
* Key-value lines look like this:
`KEY_NAME{SPACES}={SPACES}VALUE_STRING` where `{SPACES}` represents any
number of spaces. `VALUE_STRING` can contain any characters. If it is
*surrounded* with double quotes (`"`), those quotes will be removed,
this can be used to add spaces to the beginning or end of the value
* Empty lines are lines with only spaces in them
* If the line has any other form, it is a syntax error
This will introduce the following breaking changes because of how
underdefined the config syntax was before:
* `key = ""` will get treated as an empty string instead of the literal
* string `""`
* Any section or key name with forbidden characters will now be syntax
errors.
* Certain strings will be forbidden as section names: `self`, `root`,
* `BAR`. Because they have a special meaning inside references and so a
* section `[root]` can never be referenced.
This replaces the current parser implementation with a new more robust
one that will later be expanded to also check for dependency cycles and
allow for values that contain references mixed with other strings.
This PR also now expands the config paths given over the command line so
that `--config=~/.config/polybar/config` resolves properly.
Closes#1032Closes#1694
* config_parser: Add skeleton with tests
First step in the config_parser develoment. Only tests functions that
are easily testable without many outside dependencies. Integration tests
will follow.
* config_parser: Implement parse_header
* config_parser: Implement get_line_type
* feat(string): Add trim functions with predicate
Not only trimming based on single character matching but based on a
freely specifiable predicate. Will be used to trim all spaces (based on
isspace)
* config_parser: Implement parse_key
* config_parser: Implement parse_line for valid lines
* config_parser: Throw exception on invalid lines
* config_parser: Remove line_no and file_index from parse_line
Cleaner to let the caller catch and fill in the line number and file
path
* string: Clear up misleading description of trim
Before, trim would remove all characters that *didn't* match the
predicate and thus the predicate isspace wouldn't work correctly. But
because we used the inverse (isnospace_pred) it all worked out, but if
the function was used with any other function, it wouldn't have given
the desired output
* config_parser: Implement parse_file
* config_parser: Switch operation to config_parser
This changes the way the config is invoked. Now main.cpp creates a
config_parser object which then returns the singleton config object from
the parse method. Subsequent calls to config::make will return the
already created config object as before
The config_parser does not yet have all the functionality of the old
parser: `inherit` directives are not yet resolved. Other than that all
the old functionality is implemented (creating sectionmap and applying
include-file)
Any sort of dependency detection (except for include-file) are still
missing
* config: Move xrm initialization to constructor
config_parser handles the detection of xrdb references and passes that
info to the config object.
This finally allows us to delete the config::parse_file function because
everything in it has been implemented (except for xrdb detection and
file error handling)
* refactor(config_parser): Cleanup
* config_parser: Set config data after initialization
Looks much cleaner this way
* config_parser: Expand include-file paths
* config_parser: Init xrm if the config uses %{xrdb references
* config_parser: Use same type of maps as in old impl
Polybar has some weird, not yet fixed, inheriting behaviour and it
changes depending on the order in which the config stores its data.
Using the same type of maps ensures that the behaviour stays the same.
* refactor(config_parser): Clearer invalid name error message
* config_parser: Don't allow reserved section names
Sections with the names 'self', 'BAR', 'root' could never be referenced
because those strings have a special meaning inside references
* config_parser: Handle inherit directives
This uses the old copy_inherited function, so this still suffers from
crashes if there are cyclic dependencies.
This also fixes the behaviour where any key that starts with 'inherit'
would be treated as an inherit directive
* config_parser: Clearer dependency cycle error message
* refactor(config_parser): Handle file errors when parsing
This removes the need to check if the file exists separately
* fix(config): expand config file path
Now paths using ~ and environment variables can be used as the config
path
* fix(config): Properly recognize xrdb references
* config_parser: Make messages more informative
* doc(config): Improve commenting
Comments now describe what the config_parser actually does instead of
what it will do.
We also now follow the rule that single line comments inside functions
should use `//` comments
* refactor: Move else on same line as curly braces
* fix(config_parser): Don't duplicate paths in `files`
* refactor(config_parser): Use else if for clarity
* fix(config): Undefined behavior in syntax_error
Before the custom what() method produced undefined behavior because the
returned string became invalid once the function returned.
* refactor(config): descriptive name for useless lines
is_valid could easily be confused as meaning syntactically invalid
without it being clarified in a comment
* refactor(config): Use separate strings instead of key_value
Takes just as much space and is much better to read
* fix(config_parser): TestCase -> TestSuite and fix macro call
Ref: #1644
* config_parser: use const string& in method args
* config_parser: Improve comments
* config_parser: Incorporate review comments
Previously, when volume was in close proximity to n_max_volume, a larger
increase would not do anything. After this patch, volume is set to
m_max_volume in such scenarios. If the volume already is at
n_max_volume, we mirror the old behavior and emit a warning.
So, for example, consider m_max_volume was 100%, but the volume prior
to the increase was 96%. An increase of 5% would do nothing (emit a
warning, even) instead of setting the volume to 100%.
Note that this might happen even if the volume is at 95% according to
%percentage% due to rounding errors.
Displays real percentage instead of being set to 100 if percentage > full-at
* battery: added percentage_raw token, which ignores full-at
* battery: current_percentage returns raw, added clamping function instead
* battery: clamp percentage used by build()
Made clamp_percentage() const to allow its usage inside build()
* battery: read and return percentage in one line
Fixes compilation under GCC 9
The default copy constructor implicit generation is deprecated by C++ standard.
The window& operator=(const xcb_window_t win); operator seems to be useless.
Fixes#1728
Ref jaagr/xpp#16
We need to have the version string available in multiple places not just
the source code. It is now hardcoded in the root CMakeLists.txt and all
files that need it will be configured with cmake.
This also removed the unecessary duality of GIT_TAG and APP_VERSION and
GIT_TAG_NAMESPACE and APP_VERSION_NAMESPACE.
To avoid polybar from being killed by SIGUSR1 during reloading, SIGUSR1 is ignored until the signal is registered in the new polybar process.
As stated in signal(7) man page, the ignored signals are still ignored after a call to a function of the execvX family.
During an execve(2), the dispositions of handled signals are reset to the default;
the dispositions of ignored signals are left unchanged.
Fixes#428
* `layout-icon-*` list that maps layouts to icons.
* `indicator-icon-*` list that maps indicators to off and on icons
* `label-indicator-off`
* `label-indicator-on` which replaces the now deprecated `label-indicator`
* `label-indicator-[on|off]-*` for each indicator. Overrides `label-indicator-on` and `label-indicator-off`
Fixes#1558Closes#1048
* add icon support for xkeyboard layouts
* removed unneeded #include
* add sperate %icon% token that can be used in <label-layout>
* removed unneeded #include
* added caps lock indicator (was mentioned in wiki, but not actually implememnted) and support for indicator icons
* a few more fixes to make sure existing user configs are not broken
* ready to go
* Added an option to replace xkb indicator names
* Added labels for each indicator state
* Removed print left on accident
* Fixed review comments
* Update src/modules/xkeyboard.cpp
Co-Authored-By: Gilnaa <gilad@naaman.io>
Polybar had issues when there is no background set or set by a tool like imagemagick which doesn't add the root pixmap to the root window properties.
There's not much we can do about it, but at least polybar doesn't crash anymore.
Fixes#1582Fixes#1585
* fix(tray_manager): only enable transparency if neccessary
Previously, we always enabled transparency
* fix(background_manager): avoid needless fetching
* fix(renderer): move logging message to correct place
* fix(background_manager): handle dummy pixmap (_XSETROOT_ID) right
* fix(background_manager): more initialization + don't free on error
Freeing on error is incorrect, since we could still be called again later in
which case we still need the resources.
* fix(background_manager): add more infos to trace logs
* fix(background): correct typo (XROOTMAP -> XROOTPMAP)
* fix(background_manager): do not report "no background" as error
* style(background_manager): use braces for if
Co-Authored-By: bennofs <benno.fuenfstueck@gmail.com>
* fix(background_manager): better error message for dummy pixmap
Co-Authored-By: bennofs <benno.fuenfstueck@gmail.com>
* style(background): some more style fixes
* fix(connection): initialize pixmap in all cases in root_pixmap()
* style(connection): improve readability using early return
This adds `monitor-exact = true` in the bar section
This also properly does best-match instead of first-match if multiple
matches exists. For example if there are two monitors HDMI2 and HDMI-2
and we try to match HDMI-2 with monitor-exact = false, until now HDMI2
would be matched. Now exact matches are always preferred.
Fixes#1532
This adds a new label in the bspwm module `label-marked`
This flag for focused nodes of a focused desktop was introduced in [1]
and released with bspwm 0.9.4
It adds the `M` flag to `G` type items in bspwm's report format
Resolves#1552
[1]: d0138af475
This patch adds support for observing multiple slices of the desktop background.
This is used for the tray so that it doesn't have to rely on the bar's rect to
get the desktop background. In particular, it now handles the case where the
tray is not contained fully within the bar's outer rect (for example, when using tray-offset-{x,y})
Co-Authored-By: bennofs <benno.fuenfstueck@gmail.com>
* Clean up CMake logic
- removed logic to find CppUnit (no longer used)
- removed "dirs" variable used to pass include directories
- removed add_library function (no longer used)
- removed make_executable function
* only used in 2 places (polybar and polybar-msg)
* it was more general than needed, logic is simpler without it
- split polybar into static library and executable
* this allows linking unit tests to the library
* rename library
* add coverage build
- Added a CMake build type "Coverage" that builds C and C++
code with the "--coverage" flag (recognized by both GCC and Clang)
- removed "-Wno-missing-field-initializers" from test flags,
since it didn't seem to be needed any more
- removed logic from tests/CMakeLists to disable "-Werror" and "-pedantic-errors"
since there didn't seem to be any warnings during the build
* fix whitespace
* update travis
* remove O2 from defalt flags
* allow tests to be built by default make target
* disable Werror for debug builds
wireless_tools 29 redefines inline in iwlib.h as:
#define inline inline __attribute__((always_inline))
which conflicts with POLYBAR_NS, which is defined as:
#define POLYBAR_NS \
namespace polybar { \
inline namespace APP_VERSION_NAMESPACE {
In version 30.pre9 this #define is moved into a source file and thus
cannot conflict.
The error only occurs when building with clang, so it seems gcc and
clang handle this differently
Fixes#1492
If a tailed command is used polybar would generate two action tags, one
with %counter% replaced and one with %pid% replaced, but never both
This is a bug that was introduced in #934
The idea is that pseudo-transparency should behave like real transparency as
much as possible. To achieve this, we now render the bar the same way in both
cases. The only part where pseudo-transparency differs is at the very end, where
the rendered bar is captured and composited against the desktop background
image. This should ensure that both modes behave the same.
This reverts some behaviour differences introduced by the pseudo-transparency
implementation. The new implementation is much closer to the
non-pseudo-transparent case and thus keeps original behaviour.
For the new method we simply fill the bar with the background image fetched from
the root window if in pseudo-transparent mode, otherwise we do nothing. This
means that everything will work as in the fully-transparent mode.
We need to use positions relative to the position of the bar for indexing into
the background image slice, but the code used absolute ones.
This worked fine as long as absolute positions are the same as relative
positions (this is the case for a bar located at (0,0), so if bottom = false).
But for bottom bars (where the bar position is not (0,0)) this was wrong which
caused the tray background to be black (out of bounds for the background slice).
The systray only supports pseudo transparency (real transparency would require
much larger changes) so the real transparency should only be used for the bar itself.
This option is no longer necessary because the tray background color can now
simply be set to any (semi-)transparent color (just like the bar background).
We now take the bar position that the window manager gives us instead of trying
to calculate it ourselves. This is more correct when multiple bars are attached
to the same edge, as the window manager may move some of them in that
case (assuming override redirect is not enabled)
We need to fetch the outer area from the root window, not just the inner area
because we paint the background below the borders as well.
This has the nice effect of supporting semi-transparency for borders as well.
Now all the tokens in the memory module also have ramp and bar counterparts.
These can be used exactly the same as `bar-used` and `ramp-used`, they are named `<bar-swap-used>`, `<bar-swap-free>`, `<ramp-swap-used>`, and `<ramp-swap-free>`
Trimming the quotes in labels and the date module are not needed at all,
because surrounding quotes are removed when loading the values from the
config.
Removing the quotes in the builder also doesn't seem to serve any
purpose at all.
The check of the maxlen and ellipsis condition was also moved to the
label creation, this way get_label_text doesn't need to care about the
restrictions placed on maxlen and ellipsis
The repeatone button doesn't influence repeating behaviour at all, so
the name is misleading.
This deprecates icon-repeatone for now, until we can completely remove
it
Fixes#1279
This patch enables support for nl80211. In case the libnl-genl-3.0
library isn't found, it will fall back to Wext instead.
The library to use can also be manually set with the CMake option
WITH_LIBNL.
The Wireless-Extensions (WE or Wext) are deprecated and long replaced
by cfg80211.
Although Wext isn't used by WiFi drivers anymore, CFG80211_WEXT allows
old tools to communicate with modern drivers by providing a wrapper
API.
The only reason polybar couldn't build without xkb is because the
xkeyboard module's source file was not removed during compilation.
xkeyboard already has an entry in unsupported.hpp
This effectively makes xcb-util-xkb optional
When xrm was disabled, main.cpp was missing the complete defintion of
connection from connection.hpp, which was included xresources.hpp when
xrm was enabled.
It's queried the same way ipv4 addresses are queried, but here it displays globally routable addresses. If there are multiple such addresses, it picks one (same as with ipv4). It's possible that an address discovered this way is not in fact globally reachable but still marked as global.
Using brace initialization here causes bar.hpp to not compile when
included on its own, forcing all clients to also include
tray_manager.hpp and so on, which defeats the purpose of forward
declaring those classes.
This also allows us to remove the tray_manager.hpp, renderer.hpp and
parser.hpp includes from the clients of bar.hpp
As mentioned in #1215, gcc >=8 will complain, if strncpy truncates the
source string or gcc can prove there is no NUL terminating byte.
This also updates the i3ipcpp submodule where there was a similar error
Fixes#1215
atoi, atof and so on have undefined behavior if anything goes wrong. We
now use strto*, but without error checking. In most places overflows and
the like *should* not happen. String to number conversions are only used
when reading data from other applications or from the config, if another
application gives unparsable strings or too large numbers, then most
likely there is something wrong with that application. If the error
comes from the user config, then the user has to live with values
provided by strto* on error (which are very reasonable)
Fixes#1201
