* Remove DEBUG_SHADED
Was disabled by default AND behind an #if 0
* Make TimerHandle expose more libuv functions
* Prepare for moving double clicks into eventloop
* Make eventloop available to bar
* Remove bar mutex
Everything in the bar is now in the same thread
* Move double-click handling to eventloop
* Extract double click deferred function into method
* Stop throttling clicks
* Increase double click interval to 400 and add option
double-click-interval in the bar section
Closes#1441
* Implement dimming using timer handles
* Remove taskqueue
* Remove unused dependencies
* Cleanup & Comments
* feat(ramp) Implement ramp weights
*Add test for ramp weights
*[drawtypes/ramp] Implement ramp weights
Simply clone `label_t` weight no. of times in the icon list
This helps us not to change any of the calculations.
*Fix silly bug
Forgot to add a hyphen for the `weight` parameter.
Co-authored-by: Patrick Ziegler <p.ziegler96@gmail.com>
*doc: add #1750 to CHANGELOG
* Fix compile error in ramp test
Use std::make_shared.
The eventloop no longer uses them. libuv will coalesces multiple
uv_async_send if they happen one after another and this also leads to
coalescing of updates.
The scroll handler had two issues:
* It did not respect the order the desktops where displayed in
* It would not wrap around on the first desktop because of an integer
underflow
Fixes#2491
* feat:add tokens to display memory in MiB when GiB val <= 1.0 (#2472)
* fix: correct swap_used calculation
* fix: pass variable by reference rather than by value
* fix: add precision arguments to filesize_gib_mib(); better condition
* doc: add #2472 to CHANGELOG
* fix: missing default argument values
* Apply suggestions from code review
Co-authored-by: Patrick Ziegler <p.ziegler96@gmail.com>
* fix(monitor): do not include outputs when monitors are supported
Previously, when splitting an output into two monitors, `polybar -m`
would report both the splitted monitors and the output. This was not
caught by the the clone detection as the detection works by removing
monitors contained into another monitors (and monitors were excluded
from that logic) and we want the other way around: outputs covered by
monitors should be ignored.
Instead of trying to detect covered outputs, the solution is quite
simple: when monitors are supported, do not consider outputs, unless
we request all outputs. A monitor can be set primary (and RandR
reports primary outputs as primary monitors). The only information we
would miss from monitors are things like refresh rate and EDID. We
don't need that, so we are fine.
As monitors are only created for connected output (and they are in
this case "active") or disconnected output if they are mapped (and
they are in this case "inactive"), I am a bit unsure if we have
exactly the same behaviour as previously when `connected_only` is set
to `false`.
As some modules require an output, we keep the output in the
`monitor_t` structure and we ensure it is correctly set when using
monitors. A monitor can have 0 or several outputs. We only handle the
0 and 1 cases. When a monitor has more outputs, only the first one is
used. AFAIK, only the xbacklight module needs that and I think we are
fine waiting for a user needing this module and merging monitors.
The C++ binding fail to expose the `outputs()` method to iterate over
the outputs of a monitor. This seems to be a bug in XPP. The field is
correctly defined in the RandR XML file and it works with the Python
binding.
```xml
<struct name="MonitorInfo">
<field type="ATOM" name="name" />
<field type="BOOL" name="primary" />
<field type="BOOL" name="automatic" />
<field type="CARD16" name="nOutput" />
<field type="INT16" name="x" />
<field type="INT16" name="y" />
<field type="CARD16" name="width" /> <!-- pixels -->
<field type="CARD16" name="height" /> <!-- pixels -->
<field type="CARD32" name="width_in_millimeters" />
<field type="CARD32" name="height_in_millimeters" />
<list type="OUTPUT" name="outputs">
<fieldref>nOutput</fieldref>
</list>
</struct>
```
Falling back to C only to access the list of outputs is not enough
because the list is appended to the structure and not visible through
the public API. When copied, the structure loses the list of monitors.
Also, change the mention "XRandR monitor" to "no output" when there is
no output attached. People using monitors know what it means and it is
useful to catch a future regression where we don't have an output at
all (which would break the brightness plugin).
Fix#2481
* Update CHANGELOG.md
Co-authored-by: Patrick Ziegler <p.ziegler96@gmail.com>
This adds the 'send' action to the ipc module that can be used to send arbitrary text to the module:
polybar-msg action "#ipc.send.%{F#4444ff}hello%{F-}"
* feat(ipc): allow receiving arbitrary text on IPC socket
Instead of just allowing hook numbers to be executed, the user can
send arbitrary text and the IPC module will put it in the bar. The IPC
payload format is extended to accept an arbitrary string if the first
character after the module name is ':'.
polybar-msg hook test :'%{F#4444ff}hello%{F-}'
Fix#2455
* Use actions for sending data to ipc module
* ipc: Don't use exceptions when no hooks are defined
* Update src/modules/ipc.cpp
Co-authored-by: patrick96 <p.ziegler96@gmail.com>
* Add toggle_visible action
* Add set_visible and set_invisible actions
* Rename toggle_visible method to match
`action_toggle_visible` -> `action_toggle_visibility`
Matches with `EVENT_TOGGLE_VISIBILITY`
* Update CHANGELOG
* Revert #2320 IPC commands
IPC commands are no longer necessary now that the actions are
implemented. Changed some method permissions as well to reflect this.
* Add logging and change action names
- `module_toggle`
- `module_show`
- `module_hide`
Delineate common actions to all modules with a `module_` prefix (for
future actions too)
* Update documentation
XCB_BACK_PIXMAP_PARENT_RELATIVE requires that the client has the same
depth as the tray window.
There was an issue with dropbox having a depth of 32 and the tray window
having a depth of 24 that caused the configuration of the icon to fail.
It would then be displayed outside of the bar because the catch block
was not hit (different exception).
We now just don't configure XCB_CW_BACK_PIXMAP. This seems to work and
is also what stalonetray does.
This does not fix the issue with dropbox having an arbitrary background.
Fixes#1679Fixes#2430
Before sphinx 4.0, this was the default but was changed in 4.0.
Now by default the folder structure looks like this:
man
├── 1
│ └── polybar.1
└── 5
└── polybar.5
This restores the old behavior where there weren't individual folders
for the different sections.
Fixes#2424
Ref: https://www.sphinx-doc.org/en/master/changes.html#id14
* Add wm-restack=generic to lower polybar to the bottom of the stack
Previously wm-restack only supported bspwm and i3. Both have a special
top-level window that polybar detects and places itself directly above.
This patch adds wm-restack=generic which simply lowers polybar to the
very bottom of the stack. This option was tested and confirmed to work
with xmonad which doesn't have a special top-level window and therefore
doesn't require special handling like bspwm and i3.
Fixes#2205
* Update src/components/bar.cpp
Co-authored-by: Patrick Ziegler <p.ziegler96@gmail.com>
When `pin-workspaces` is set to true using `show-urgent` will show
urgent workspaces on the bar even when the workspace is not associated
with the current monitor.
* add reverse-scroll option for xworkspaces module
* move use of reverse-scroll option to when producing scroll action
* documented xworkspaces reverse-scroll option in changelog
Add a config parser method which, for now, deals only with escaping the
literal backslash character and logs an error message to inform the user
of the coming change.
The error message includes a properly escaped value for the user.
As a result of introducing an escape character('\'):
- Warn the user of any unescaped backslashes, as they will not be
treated as a literal character in the future
- For now, still treat a single backslash as a literal character
- Treat two consecutive backslashes as a single properly escaped
literal backslash
Also:
- Add documentation about the escape character to polybar(5) manpage
- Add info about the escape character to changelog
- Add testcases for ParseLineKeyTest
- Add new test ParseEscapedValueTest
Resolves: First step in #2354
Improve value parsing
- Take value arg in as an rvalue reference and move parsed value back
- Remove unnecessary if statement
- Rename function
- Improve error message
- Improve function description
- Format
Add escape character documentation to manpages
Add information about the escape character to the polybar(5) manpage.
Add info about the esacape character to changelog
Add test cases for ParseLineKeyTest
Fix ParseLineKeyTest test cases
Also make config parser method parse_escaped_value private.
Add tests for escaped_value_parser method
Also remove unsued include statement
Simplify parse_escaped_value in config_parser
Remove unnecessary escaped value generation, so we do not have to keep
track of index differences.
Fix ParseEscapedValueTest test cases
Fix parse_escaped_value
Add more test cases for ParseLineKeyTest
Update CHANGELOG.md
Co-authored-by: Patrick Ziegler <p.ziegler96@gmail.com>
Adress review
- Adjust documentation
- Small code changes
Improve parse_escaped_value
Add initial support for an escape character
Add a config parser method which, for now, deals only with escaping the
literal backslash character and logs an error message to inform the user
of the coming change.
The error message includes a properly escaped value for the user.
As a result of introducing an escape character('\'):
- Warn the user of any unescaped backslashes, as they will not be
treated as a literal character in the future
- For now, still treat a single backslash as a literal character
- Treat two consecutive backslashes as a single properly escaped
literal backslash
Resolves: First step in #2354
Improve value parsing
- Take value arg in as an rvalue reference and move parsed value back
- Remove unnecessary if statement
- Rename function
- Improve error message
- Improve function description
- Format
Add info about the esacape character to changelog
Add test cases for ParseLineKeyTest
Fix ParseLineKeyTest test cases
Also make config parser method parse_escaped_value private.
Add tests for escaped_value_parser method
Also remove unsued include statement
Simplify parse_escaped_value in config_parser
Remove unnecessary escaped value generation, so we do not have to keep
track of index differences.
Fix ParseEscapedValueTest test cases
Add more test cases for ParseLineKeyTest
Adress review
- Adjust documentation
- Small code changes
Remove duplicate testcase from ParseLineKeyTest
Add initial support for an escape character
Add a config parser method which, for now, deals only with escaping the
literal backslash character and logs an error message to inform the user
of the coming change.
The error message includes a properly escaped value for the user.
As a result of introducing an escape character('\'):
- Warn the user of any unescaped backslashes, as they will not be
treated as a literal character in the future
- For now, still treat a single backslash as a literal character
- Treat two consecutive backslashes as a single properly escaped
literal backslash
Resolves: First step in #2354
Improve value parsing
- Take value arg in as an rvalue reference and move parsed value back
- Remove unnecessary if statement
- Rename function
- Improve error message
- Improve function description
- Format
Fix ParseLineKeyTest test cases
Also make config parser method parse_escaped_value private.
Remove duplicate testcase from ParseLineKeyTest
Modules can now also be shown and hidden using ipc commands:
$ polybar-msg [-p PID] cmd hide.mymodule # Hides module mymodule
$ polybar-msg [-p PID] cmd show.mymodule # Shows module mymodule
$ polybar-msg [-p PID] cmd toggle.mymodule # Toggles visibility of mymodule
* Hopefully implement visibility checking
* Implement hide command
* Implement `show` and `toggle` commands
* Refactor and add some logging
* Run style checks and update CHANGELOG
* Get around unused parameter warnings
* Change `set_visible` to return nothing
* Make errors more informative
Co-authored-by: Patrick Ziegler <p.ziegler96@gmail.com>
* Update bar when changing module visibility
- Called in the module to maintain dependence on the signal emitter
- Update CHANGELOG to make changes more verbose
* wrong var
* Update include/modules/unsupported.hpp
Co-authored-by: Patrick Ziegler <p.ziegler96@gmail.com>
Co-authored-by: Patrick Ziegler <p.ziegler96@gmail.com>
The intention was to remove tags that won't have an effect and join
together consecutive tags.
However the patterns used can just as well appear in regular text, so
this can replace characters inside user defined text and not just
formatting tags.
Fixes#2331
Each major target of polybar can now be enabled/disabled while
configuring (even polybar itself).
The cmake code specific to each target will only run if the target is
enabled.
This allows us to for example just build the documentation without
having to run all the cmake code related to compilation or having the
polybar dependencies installed (other than sphinx).
* Added .ini extension check to default config
* Added change to changelog and man page
* Added change to changelog and man page
* removed .vscode folder
* removed new lines in changelog
* Add variant support to xkeyboard layout label
Solves #316
* Run style checks, I guess?
* Add comment
* Return nothing if there is no variant
* Update CHANGELOG
