* Prioritize battery full-at over state
The `full-at` option should take priority
over the charging state of the battery.
Closes#1622 (issue for Thinkpad laptops)
* Remove typo from clamp_percentage
Some devices can have "amdgpu_bl1" or "amdgpu_bl2", but the code hardcoded in the value "amdgpu_bl0". This change tests based on the first characters: "amdgpu_bl".
If an input is enqueued as a response to an input, the new input will be
swallowed because it will likely be enqueued less than 30ms after the
original event.
This is not something that is an issue right now but it is required to
finish #1907 where, in order to close the menu after a click, the menu
module gets an exec action that closes the menu and adds a command to
the event queue.
The setting also isn't too useful since it will just break polybar input
handling if inputs arrive too fast instead of (possibly) slowing down
the bar.
Before the module would just try to evenly distribute desktops
(workspaces) among the viewports.
But since `_NET_DESKTOP_VIEWPORT` actually maps desktops to viewports,
we can use that information to assign workspaces to the right viewport.
Fixes#1849Fixes#1764
It is useful for people to see what config file polybar loaded.
For debugging font issues people almost always need to check what fonts
polybar loaded, for that they need to run polybar with info logging. Now
this information is always provided. This requires an update in the font
wiki page.
A warning implies something went wrong and (possibly) the user should do
something about it. However, warnings are not always used this way.
For example:
* When a fallback value for a `${..}` reference is used, this shouldn't
produce a warning (or notice) since using fallbacks is not something
bad.
* pulse telling you that it uses the default sink because no sink was
specified also does not warrant a warning (even notice may be too
high).
* Whenever polybar shuts down it produces a "Termination signal
received..." warning. Since there isn't a more proper way to shut down
polybar, it should not produce a warning. Same argument for a
`screenchange-reload`
Before it would only reload if the size changed and even that was
reliable since the method relied on the order of the monitor list.
Now if the monitor list differs in any way (pos, dimension, primary,
output, name) a reload is issued
Because of how monitors are removed inside the loop and depending on the
monitor order a cloned monitor may be assigned a width of 0 but is never
actually removed resulting in polybar saying the bar is out of bounds
Fixes#1794
Removing monitors is not really necessary when selecting the monitor
where to render the bar or choosing the backlight. Since both monitors
occupy the same coordinates rendering can be done on both and it's
better to give people felxibility for the backlight.
Fixes#1191
Premature optimization that tried to cache monitors but the cache did
not take into account the parameter values.
The call `get_monitors(..., ..., false, true);` would get all connected
and unconncected monitors a subsequent call
`get_monitors(..., ..., true, false);` would get back the same list of
monitors even though it requested only connected monitors.
Additionally `get_monitors` is never called periodically so the
optimization really didn't help much.
The github module only authenticate by query string, and this method is deprecated:
https://developer.github.com/changes/2019-11-05-deprecated-passwords-and-authorizations-api/#authenticating-using-query-parameters
There is no reason to remove it before the method stop working, so I've made possible to the user choose which authentication method he will use:
* The parameter token remain unchanged.
* If the parameter user is passed then the module will use the not deprecated method, passing user and token on the body of the requisition. Otherwise the module will use the deprecated method.
Co-authored-by: Lucas <araujo.lucasvale@gmail.com>
Fixes#2002
If an exact match was possible, fuzzy matching could still return a
non-exact match if it appeared before the exact match in the list of
icons.
Fixes#2041
Adds `format-offline` and `label-offline`
* feat(github): offline label & fixes
* Clear label if there are no notifications and empty-notifications = false
* clang-format
Co-authored-by: Patrick Ziegler <p.ziegler96@gmail.com>
In the case where _NET_NUMBER_OF_DESKTOPS > |_NET_DESKTOP_NAMES|
the last branch of the get_desktop_names method would return a vector
with _NET_NUMBER_OF_DESKTOPS + 1 elements because we iterate until
_NET_NUMBER_OF_DESKTOPS + 1.
Fixes#1983
Functionality-wise reverts the changes from #1534
In #1907 we have decided to allow the same module to appear multiple
times (and deliver actions to all matching modules). But since that PR
will likely take longer to get merged, I want to remove the error from
polybar because the message it prints isn't really true anymore.
Before, if the command produced no output, the `m_output` field would
not have been overwritten and the old output was displayed.
But since this is an explicit trigger of the hook, the user would expect
the output to be updated to whatever the script produces (even if that
is nothing).
Ref: https://www.reddit.com/r/Polybar/comments/e9a8ww
The old code didn't really work when the right block was pushing against
the center block. Also `fixed-center` wasn't properly defined. I have
now fixed it to the following:
* `fixed-center = true`: The center block stays at the center of the bar
whenever possible. It can be pushed to the left if the right block takes
too much space and to the right if the left block takes too much space
* `fixed-center = false`: The center block will be in the middle between
the left and right block whenever possible. If there is not enough space
between those two, the center block will be directly to the right of the
left block and pushes out the right block
The issue was that it used the position of the center module to
calculate the leftmost possible position of the block. However, if the
center module is empty that position is disastrously wrong.
Fixes#591Fixes#1903
the `node` and `node_repeat` were never called with the optional
parameter add_space. And its default value is false, so the
corresponding code was never used.
I think in general it is better to just have the user of those functions
call `builder::space` when they need to instead of adding more
complexity to the `node*` functions.
* Add label minlen and alignment.
Fix build
* Update src/drawtypes/label.cpp
Co-Authored-By: infokiller <infokiller@users.noreply.github.com>
* Use existing alignment type.
* Remove redundant max_len handling in label::get.
* Fix shadowing.
* Add label alignment tests.
* Handle minlen/maxlen and alignment in same function.
Also add a test for a test case brought up in the PR discussion.
* Format files with clang-format
* Move builder::get_label_text tests into label tests
builder::get_label_text doesn't really do anything anymore
* builder: remove get_label_text
* label: Clean up label::get()
* Fix comment style.
* Set default label alignment to left.
* Update src/drawtypes/label.cpp
Co-Authored-By: Patrick Ziegler <p.ziegler96@gmail.com>
* Update include/drawtypes/label.hpp
Co-Authored-By: Patrick Ziegler <p.ziegler96@gmail.com>
None of the payload fields seem to be used. They were the only place
where EVENT_SIZE was used and why it had to be a macro (no variable
length arrays).
Since APP_VERSION is different for every commit and almost all file
include settings.hpp, the whole project has to be rebuilt for every
commit. With this, hopefully, this can be greatly reduced and only
changed files need to be rebuilt. This will also help ccache
Some people use text modules instead of the `separator` key in the bar
section to better configure the separator (colors, fonts).
Since we disallowed the same module being used multiple times in #1534,
this will now print an error message.
This should help with this a bit.
Ref #1913
Some WMs like i3 discard position information when unmapping the bar and
because of that the bar would be at the wrong position after being
remapped.
Fixes#1484
Ref: https://github.com/i3/i3/pull/3834
* refactor: Use flat module list if possible
Before if you wanted to iterate over all loaded modules you had to first
iterate over all blocks and then over their modules even if you didn't
care about alignment.
* refactor: setup modules in separate function
* controller: Print error for duplicate modules
You can't use the same name twice inside the module lists
E.g.
modules-left = a b c
modules-center = a
modules-right = b
would print an error.
We only print an error for now because we don't want to break existing
configs. But in the future this should be properly enforced.
A workspace is occupied if it is not active and there is at least one window managed by the WM (`_NET_CLIENT_LIST`) that has set `_NET_WM_DESKTOP` to that workspace.
The behavior when `_NET_WM_DESKTOP` is not set is not yet clear but this is unlikely to happen since most WMs will position windows on some desktop.
Closes#874Fixes#1444Fixes#1033
* Set Desktop OCCUPIED if a window moves there
This covers more of an edge-case. I did this first by accident, it might
vanish later on.
* Replace tracking change of WS with currently used WS
* Untrack occupied workspaces
* Track windows and their desktops in pairs
* Match type of occupied_desktops with current_desktop
Because the index needs to be matched later on, type mismatches would be non-ideal.
* Recreate the occupied desktops everytime and remove duplicates
* Readd support for moving windows to other desktops
* Use less characters to empty the vector
* Rename variable storing the desktops
* Recount windows on every occasion
This alone simplifies the management and the lookup for occupation of a
workspace
* Keep track of number of windows in every workspace
* Add debugging output that shall be removed before merging
* Remove obsolete TODO
* m_client_list should always be diff'd, since the desktop may change
Therefore we update the desktop-count tally every time the client_list
changes. It may just be a desktop-change without a change of
clients.size()...
* Add more logging-spam to understand window/desktop lifecycle
* Lock event-handler to serialize handling of events
* Fix occupied workspace counting and change to bool array
Also, performance improvements when diffing new and old client lists
* Fix crash when all clients are removed
* Conform to linter and styleguide
* Shorten conditional as it is standard enough
Since this only guards against 0-divisions, it can be shortened
without risking too much confusion down the road.
* Guard against multiple threads accessing and modifying data
Fixes#1444
Modification of internal data happens through the handle-method, while
the build-method tries to access the data structures for display. Since
some modifications clear e.g. the m_viewports, references may become
invalid between looping over them an accessing them.
The mutex should guard against this simultanuous access.
* Do not 'adopt_lock', because calls come from very different threads
To my understanding, adopt_lock has some dependency on the mutex-ownership. Since
the lock is once called from the inside (in handle) and once from the outside (in
build), there might be a problem. After brief testing, the segfaults happened fewer
times.
See #1444
* Also listen to _NET_WM_DESKTOP
In order to move a window from one desktop to another, it is sufficient
to set the desktop-property of that window. xmonad fires a lot of events
in the case of moving a window, herbstluftwm only updates the
_NET_WM_DESKTOP-atom of the window.
This change reloads the clientlist in order to correctly set the
desktop state "occupied".
* Describe need and use of mutex
It might be possible to relieve the guard in xworkspaces_module::handle,
but I am unsure about this. Since xmonad emits a lot of events on almost
every minor change, I would let the guard keep its post, avoiding
race-conditions in event-handling.
* Give temporary variables better names
* Clarify purpose of loop
About 80% of this comment are taken from
https://github.com/jaagr/polybar/pull/882#discussion_r255317363
* Remove merge-remainder
* Use a simpler method to list occupied desktops.
Co-authored-by: Jérôme Boulmier <jerome.boulmier@outlook.fr>
* Document m_clients field
While an update was forced whenever polybar was made visible, the
`m_lastinput` variable was still set to the same value as when the bar
became hidden because updates to it were prevented.
Fixes#1875
This fixes a regression introduced in
56e24992df where relative config file
paths weren't recognized because file_util::expand just added a slash
to the beginning.
That is calling `polybar -c config example` would try to load the config
file at `/config` instead of using the relative path as before.
In all other cases where expand is used this change shouldn't matter
because polybar only accepts absolute paths everyhwere else.
Theoretically this would now allow relative paths (relative to the cwd
where polybar was called) but this shouldn't used (or documented)
because that behavior will change when merging #1523 which would make
paths relative to the polybar config.
Ref #1523
Ref 56e24992df
The %{PR} tag is introduced for this. It resets all colors as well as
the activation of the underline and overline and font.
This has become necessary because we don't track what raw tags a user
injects into the formatting string and otherwise their raw tags could
bleed through.
This doesn't touch action tags because even before raw action tags
weren't being tracked. Action tags also have the requirement that they
have to be used in pairs, so closing them prematurely could break things
(for example with click actions for the entire bar)
When adding a string to the builder directly, it would parse the string
for formatting tags, delete them and readd them with the methods in the
builder that keep track of open tags so that we can properly close them
when flushing.
This parser has a bug, it parses multiple formatting tags in a single
block as a single tag, e.g.
%{F#000000 u#FFFFFF +u}
would be parsed as an `F` tag with value `#000000 u#FFFFFF +u` which is
of course wrong.
Removing the parsing step fixes this problem in the simplest way
possible. This has two benefits:
* Building of modules is sped up because we don't have to do the parsing
step in the builder and many modules use this function to add strings
from a progressbar (which already has properly closed tags).
* We don't have parser logic in two places. Until now both `parser.cpp`
and `builder.cpp` actually parsed formatting tags. This leads to a lot
of code duplication and, as we've seen, bugs.
All of the modules that use this function to add text already make sure
that they properly close formatting tags (mostly by using the builder to
generate the strings)
NOTE: This change slightly changes polybar's behavior. Raw tags (tags
added by the user through the config) can now have their effects reach
neighboring modules because the builder doesn't track and thus doesn't
close them on each flush. This can (and will) be resolved by resetting
all tags at module borders.
Fixes#1555
There really is no reason to also close over/underline tags when we have
a right margin and a non-black over/underline color.
The git blame for these lines also doesn't give us any insights as to
why it was done this way.
Using a bit vector to track the active attributes does not really give a
significant speed increase, especially for only two attributes
Checking if a syntaxtag or an attribute exists in the map just adds
unnecessary code
Was around since the first commit but no documentation why. It was only
used in the text module and doesn't appear in any public documentation,
so this doesn't break anything.
This is the next step to merge #1237 in stages.
Currently there are barely any restrictions on how the config can be
written. This causes things like config files with DOS line endings to
not be parsed properly (#1366) because polybar splits by `\n` and when
parsing section headers, it can't deal with the `\r` at the end of the
line and thus doesn't recognize any section headers.
With this PR we introduce some rules as to what characters are allowed
in section names and keys.
Note: When talking about spaces I refer to any character for which
`isspace()` returns `true`.
The rules are as follows:
* A section name or a key name cannot contain any spaces as well as any
of there characters:`"'=;#[](){}:.$\%`
* Spaces at the beginning and end of lines are always ignored when
parsing
* Comment lines start with `;` or `#` and last for the whole line. The
whole line will be ignored by the parser. You cannot start a comment at
the end of a line.
* Section headers have the following form `[HEADER_NAME]`
* Key-value lines look like this:
`KEY_NAME{SPACES}={SPACES}VALUE_STRING` where `{SPACES}` represents any
number of spaces. `VALUE_STRING` can contain any characters. If it is
*surrounded* with double quotes (`"`), those quotes will be removed,
this can be used to add spaces to the beginning or end of the value
* Empty lines are lines with only spaces in them
* If the line has any other form, it is a syntax error
This will introduce the following breaking changes because of how
underdefined the config syntax was before:
* `key = ""` will get treated as an empty string instead of the literal
* string `""`
* Any section or key name with forbidden characters will now be syntax
errors.
* Certain strings will be forbidden as section names: `self`, `root`,
* `BAR`. Because they have a special meaning inside references and so a
* section `[root]` can never be referenced.
This replaces the current parser implementation with a new more robust
one that will later be expanded to also check for dependency cycles and
allow for values that contain references mixed with other strings.
This PR also now expands the config paths given over the command line so
that `--config=~/.config/polybar/config` resolves properly.
Closes#1032Closes#1694
* config_parser: Add skeleton with tests
First step in the config_parser develoment. Only tests functions that
are easily testable without many outside dependencies. Integration tests
will follow.
* config_parser: Implement parse_header
* config_parser: Implement get_line_type
* feat(string): Add trim functions with predicate
Not only trimming based on single character matching but based on a
freely specifiable predicate. Will be used to trim all spaces (based on
isspace)
* config_parser: Implement parse_key
* config_parser: Implement parse_line for valid lines
* config_parser: Throw exception on invalid lines
* config_parser: Remove line_no and file_index from parse_line
Cleaner to let the caller catch and fill in the line number and file
path
* string: Clear up misleading description of trim
Before, trim would remove all characters that *didn't* match the
predicate and thus the predicate isspace wouldn't work correctly. But
because we used the inverse (isnospace_pred) it all worked out, but if
the function was used with any other function, it wouldn't have given
the desired output
* config_parser: Implement parse_file
* config_parser: Switch operation to config_parser
This changes the way the config is invoked. Now main.cpp creates a
config_parser object which then returns the singleton config object from
the parse method. Subsequent calls to config::make will return the
already created config object as before
The config_parser does not yet have all the functionality of the old
parser: `inherit` directives are not yet resolved. Other than that all
the old functionality is implemented (creating sectionmap and applying
include-file)
Any sort of dependency detection (except for include-file) are still
missing
* config: Move xrm initialization to constructor
config_parser handles the detection of xrdb references and passes that
info to the config object.
This finally allows us to delete the config::parse_file function because
everything in it has been implemented (except for xrdb detection and
file error handling)
* refactor(config_parser): Cleanup
* config_parser: Set config data after initialization
Looks much cleaner this way
* config_parser: Expand include-file paths
* config_parser: Init xrm if the config uses %{xrdb references
* config_parser: Use same type of maps as in old impl
Polybar has some weird, not yet fixed, inheriting behaviour and it
changes depending on the order in which the config stores its data.
Using the same type of maps ensures that the behaviour stays the same.
* refactor(config_parser): Clearer invalid name error message
* config_parser: Don't allow reserved section names
Sections with the names 'self', 'BAR', 'root' could never be referenced
because those strings have a special meaning inside references
* config_parser: Handle inherit directives
This uses the old copy_inherited function, so this still suffers from
crashes if there are cyclic dependencies.
This also fixes the behaviour where any key that starts with 'inherit'
would be treated as an inherit directive
* config_parser: Clearer dependency cycle error message
* refactor(config_parser): Handle file errors when parsing
This removes the need to check if the file exists separately
* fix(config): expand config file path
Now paths using ~ and environment variables can be used as the config
path
* fix(config): Properly recognize xrdb references
* config_parser: Make messages more informative
* doc(config): Improve commenting
Comments now describe what the config_parser actually does instead of
what it will do.
We also now follow the rule that single line comments inside functions
should use `//` comments
* refactor: Move else on same line as curly braces
* fix(config_parser): Don't duplicate paths in `files`
* refactor(config_parser): Use else if for clarity
* fix(config): Undefined behavior in syntax_error
Before the custom what() method produced undefined behavior because the
returned string became invalid once the function returned.
* refactor(config): descriptive name for useless lines
is_valid could easily be confused as meaning syntactically invalid
without it being clarified in a comment
* refactor(config): Use separate strings instead of key_value
Takes just as much space and is much better to read
* fix(config_parser): TestCase -> TestSuite and fix macro call
Ref: #1644
* config_parser: use const string& in method args
* config_parser: Improve comments
* config_parser: Incorporate review comments
Previously, when volume was in close proximity to n_max_volume, a larger
increase would not do anything. After this patch, volume is set to
m_max_volume in such scenarios. If the volume already is at
n_max_volume, we mirror the old behavior and emit a warning.
So, for example, consider m_max_volume was 100%, but the volume prior
to the increase was 96%. An increase of 5% would do nothing (emit a
warning, even) instead of setting the volume to 100%.
Note that this might happen even if the volume is at 95% according to
%percentage% due to rounding errors.
Displays real percentage instead of being set to 100 if percentage > full-at
* battery: added percentage_raw token, which ignores full-at
* battery: current_percentage returns raw, added clamping function instead
* battery: clamp percentage used by build()
Made clamp_percentage() const to allow its usage inside build()
* battery: read and return percentage in one line
Fixes compilation under GCC 9
The default copy constructor implicit generation is deprecated by C++ standard.
The window& operator=(const xcb_window_t win); operator seems to be useless.
Fixes#1728
Ref jaagr/xpp#16
We need to have the version string available in multiple places not just
the source code. It is now hardcoded in the root CMakeLists.txt and all
files that need it will be configured with cmake.
This also removed the unecessary duality of GIT_TAG and APP_VERSION and
GIT_TAG_NAMESPACE and APP_VERSION_NAMESPACE.
To avoid polybar from being killed by SIGUSR1 during reloading, SIGUSR1 is ignored until the signal is registered in the new polybar process.
As stated in signal(7) man page, the ignored signals are still ignored after a call to a function of the execvX family.
During an execve(2), the dispositions of handled signals are reset to the default;
the dispositions of ignored signals are left unchanged.
Fixes#428
* `layout-icon-*` list that maps layouts to icons.
* `indicator-icon-*` list that maps indicators to off and on icons
* `label-indicator-off`
* `label-indicator-on` which replaces the now deprecated `label-indicator`
* `label-indicator-[on|off]-*` for each indicator. Overrides `label-indicator-on` and `label-indicator-off`
Fixes#1558Closes#1048
* add icon support for xkeyboard layouts
* removed unneeded #include
* add sperate %icon% token that can be used in <label-layout>
* removed unneeded #include
* added caps lock indicator (was mentioned in wiki, but not actually implememnted) and support for indicator icons
* a few more fixes to make sure existing user configs are not broken
* ready to go
* Added an option to replace xkb indicator names
* Added labels for each indicator state
* Removed print left on accident
* Fixed review comments
* Update src/modules/xkeyboard.cpp
Co-Authored-By: Gilnaa <gilad@naaman.io>
Polybar had issues when there is no background set or set by a tool like imagemagick which doesn't add the root pixmap to the root window properties.
There's not much we can do about it, but at least polybar doesn't crash anymore.
Fixes#1582Fixes#1585
* fix(tray_manager): only enable transparency if neccessary
Previously, we always enabled transparency
* fix(background_manager): avoid needless fetching
* fix(renderer): move logging message to correct place
* fix(background_manager): handle dummy pixmap (_XSETROOT_ID) right
* fix(background_manager): more initialization + don't free on error
Freeing on error is incorrect, since we could still be called again later in
which case we still need the resources.
* fix(background_manager): add more infos to trace logs
* fix(background): correct typo (XROOTMAP -> XROOTPMAP)
* fix(background_manager): do not report "no background" as error
* style(background_manager): use braces for if
Co-Authored-By: bennofs <benno.fuenfstueck@gmail.com>
* fix(background_manager): better error message for dummy pixmap
Co-Authored-By: bennofs <benno.fuenfstueck@gmail.com>
* style(background): some more style fixes
* fix(connection): initialize pixmap in all cases in root_pixmap()
* style(connection): improve readability using early return
