Robert F-C
0d4a9444c4
Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1
2013-05-19 08:50:58 +10:00
Erik van der Zalm
86cce025f4
Added #ifdef NUM_SERVOS to servo.cpp
2013-05-18 23:12:28 +02:00
Robert F-C
4121311b9d
Change to LCD status indicators
...
The I2C LCD status indicators now indicate when the hotends or bed are
turned on at all (rather than just when they are in their heating phase)
2013-05-18 22:30:42 +10:00
Robert F-C
dfa549f268
Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1
2013-05-18 21:59:39 +10:00
ErikZalm
64360164ad
Merge pull request #482 from codexmas/Marlin_v1
...
servosupport
2013-05-16 10:19:00 -07:00
ErikZalm
86405cdd11
Merge pull request #479 from MStohn/thermocouple
...
BUGFIXES for temperature.cpp / add RUMBA thermocouple support
2013-05-16 10:06:59 -07:00
Erik van der Zalm
6c45c3f4e7
BariCUDA changes
2013-05-16 19:01:12 +02:00
Gord Christmas
96624f0f31
Forgot to include reference to Servo in makefile
2013-05-16 08:25:20 -07:00
Gord Christmas
dc59f07d24
First attempt at refactoring of original servo code. Only adding servo support as a start to keep things simple.
2013-05-16 07:03:01 -07:00
Gord Christmas
b668cb0516
Adding in clean copies of Servo library from Arduino 1.0.4
2013-05-16 06:47:42 -07:00
MaikStohn
95dff34b73
fixed wrong compare for min temp check of heater 1 and heater 2
2013-05-16 01:17:38 +02:00
MaikStohn
4cc6f9f6de
fixed wrong pin initialization when using temperature 2 pin input
2013-05-16 01:17:08 +02:00
MaikStohn
61a48cc662
Add support for RUMBA thermocouple add on
2013-05-16 01:16:33 +02:00
MaikStohn
9cc15876be
Add support for RUMBA thermocouple add on
2013-05-16 01:16:08 +02:00
ErikZalm
c9cf2174dd
Merge pull request #474 from xifle/Marlin_v1
...
Fixed "Cooldown" Selection not reseting bed temp
2013-05-14 14:58:53 -07:00
Erik van der Zalm
bd2cd4903e
Added #ifdef BARICUDA around the BariCUDA changes
2013-05-14 23:56:32 +02:00
Jordan Miller
37f3199df3
fixed problems in planner with solenoids for BariCUDA when set to 0
2013-05-14 23:35:01 +02:00
Jordan Miller
fbd899a37d
Support for BariCUDA Paste Extruder derived from MakerBot Frostruder. Using Ultimachine RAMBo board. M126/M127 and M128/M129.
2013-05-14 23:34:45 +02:00
xifle
29bb8d7d4f
Fixed "Cooldown" Selection not reseting bed temp
...
- enquecommand with multiple lines "\n" doesn't work -> M140 S0 didn't
get processed. So I wrote a new func for the cooldown which uses
setTargetHotend. In addition this does return to status page after
selection.
- Added setWatch() to preheat-functions (Temperatur sanity check
would never have worked when preheating from the lcd panel)
2013-05-14 16:56:19 +02:00
Robert F-C
015d0594b0
Optimize menu selection for Viki rotary encoder.
...
The Viki LCD rotary encoder uses a different number of steps per
rotation. This fixes the seeming "missed" steps when selecting a menu.
2013-05-12 07:51:28 +10:00
gregor
2739c26c4f
changes:
...
- changed the variables from keypad to reprapworld_keypad
- added a missing ifdef check
2013-05-10 22:20:02 +02:00
gregor
6fb9573157
added support for the reprapworld keypad
2013-05-10 21:57:17 +02:00
midopple
a65a26d6b4
If CORE_XY is in use X and Y Axis had to be activated at the same time
2013-05-05 19:23:59 +02:00
midopple
db2f157a22
Replace the <= to < in the Command M907, M350 and M351.
...
The for loop for Axis count over the Array.
Add a break after M907
2013-05-05 19:19:55 +02:00
Arnoud
fc4ab05157
Solved minor bug in controllerFan()
...
Extruder 2 was checked where extruder 1 should be checked.
2013-05-03 21:32:34 +02:00
Martin Renold
1a397825f9
fix DEFAULT_AXIS_STEPS_PER_UNIT minor Z rounding error
2013-05-01 08:30:24 +02:00
Robert F-C
289c02eda4
Remove unnecessary pin initialization in stepper.cpp
...
(duplicates initialization in Marlin_main.cpp)
2013-04-30 01:11:23 +10:00
Robert F-C
d5ad7a0814
Rework change to incorporate CONTROLLERFAN
...
Also refactor extruder auto fan logic to simplify further and now only
check every 2.5 seconds
2013-04-30 01:08:29 +10:00
Robert F-C
c3cdaceab3
Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1
2013-04-29 22:13:55 +10:00
Robert F-C
1c127217df
Make DOGLCD merge neater.
2013-04-29 22:03:37 +10:00
Robert F-C
7f57f28ccc
Add lcd_buzz function to ultralcd.h so that non-LCD code can make use of lcd's buzzer.
...
Argument order of lcd_buzz was set to mirror that on tone(). Change
default M300 frequency to something audible.
2013-04-29 21:50:52 +10:00
Robert F-C
788d62bcc4
Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1
...
Conflicts:
Marlin/Marlin.pde
Marlin/ultralcd.cpp
Marlin/ultralcd_implementation_hitachi_HD44780.h
2013-04-29 21:13:46 +10:00
Lukasz Stefanowicz
d71f1e9bf6
Add (as an option) slower SD transfer mode
2013-04-24 10:50:57 +02:00
ErikZalm
db5bb8546d
Merge pull request #452 from MStohn/Marlin_v1
...
128x64 RepRapDiscount Full Graphic Smart Controller support
2013-04-23 09:43:37 -07:00
daid
4b2ece159b
Merge pull request #453 from brackendawson/Marlin_v1
...
Make Gen7 1.4+ heater temp sensort pins match silkscreen.
2013-04-16 10:12:25 -07:00
Bracken Dawson
d5ee2a5a62
Make Gen7 1.4 heater pins match silkscreen
2013-04-16 17:37:38 +01:00
MaikStohn
7ac6d7f78e
FIX: Speedup - no explicit display clear needed in u8glib
2013-04-16 14:22:24 +02:00
MaikStohn
13596e8722
Added RepRapDiscount FULL GRAPHIC Smart Controller
2013-04-16 14:21:39 +02:00
MaikStohn
3a6abe1d6e
Removed STB custom font hack from u8glib library and moved to marlin project
2013-04-16 13:54:39 +02:00
MaikStohn
16afbf9bfa
FIX: adopted latest changes from hitachi implementation
2013-04-16 13:51:48 +02:00
daid303
34bca48b98
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
2013-04-15 15:11:38 +02:00
daid303
ac52dcc174
Updated the card menu and watch messages to make it more informative.
2013-04-15 15:11:22 +02:00
Stefanowicz
31bb3fb297
Fix: Build error when EEPROM_SETTINGS is defined and PIDTEMP is undefined
2013-04-12 18:04:32 +02:00
daid303
c80a78bb70
Lower the default max E feedrate a bit. With the stepper fix this is much to high.
2013-04-12 13:54:38 +02:00
Simon Oliver
5d5909fc25
Fix failure to compile with heated bed: remove call to non-existant scaleBedPID().
2013-04-12 13:32:47 +02:00
Simon Oliver
93f0463b21
Allow Edit menu to call fn after edit; Fix PID Ki and Kd display in menus; Actually use changed PID and Max Accel values
...
Add new 'callback' edit-menu types that call a function after the edit is done. Use this to display and edit Ki and Kd correctly (removing the scaling first and reapplying it after). Also use it to reset maximum stepwise acceleration rates, after updating mm/s^2 rates via menus. (Previously, changes did nothing to affect planner unless saved back to EEPROM, and the machine reset).
Add calls to updatePID() so that PID loop uses updated values whether set by gcode (it already did this), or by restoring defaults, or loading from EEPROM (it didn't do those last two). Similarly, update the maximum step/s^2 accel rates when the mm/s^2 values are changed - whether by menu edits, restore defaults, or EEPROM read.
Refactor the acceleration rate update logic, and the PID scaling logic, into new functions that can be called from wherever, including the callbacks.
Add menu items to allow the z jerk and e jerk to be viewed/edited in the Control->Motion menu, as per xy jerk.
Conflicts:
Marlin/language.h
2013-04-12 13:31:30 +02:00
Bart K
4fa2260a59
Fixed cardreader.h to resolve issue #440 (Pull Request #425 missing file)
2013-03-31 19:59:16 -04:00
Erik van der Zalm
038d405254
Corrected #endif in language.h
2013-03-31 20:28:29 +02:00
Dirk Eichel
443aaa30bf
Removed GIT fragments
...
Seems that there was something wrong while merging
2013-03-30 23:26:42 +01:00
ErikZalm
7f622467fc
Merge pull request #425 from kefir-/m928_logging
...
M928 logging
2013-03-30 08:50:34 -07:00
