Scott Lahteine
73ddc762c8
Fix up LCD init / charset
2017-11-22 18:07:03 -06:00
GMagician
7a5b3a1e6a
[1.1.x] Tool change bad behaviour fix
...
Just aligned with version 2.0. Here bug was not present
2017-11-22 23:51:07 +01:00
Scott Lahteine
e2568d7589
Fix delta_safe_distance_from_top
2017-11-22 14:11:04 -06:00
Scott Lahteine
0b1d754e7d
Fix G42
2017-11-22 14:11:04 -06:00
Scott Lahteine
bbc2ee6da1
Don't re-init graphical LCD after boot screen
...
Followup to 13a3fb1acc
2017-11-21 18:21:50 -06:00
GMagician
b96ceb4256
[1.1.x] tool change bad behaviours
...
This PR will address two issues reported in #8492 . Just one is left because I don't know if it is an issue or not
1) when no home is done ("no_move" is set) tool change should never move X & Y because... I don't know where I am...only Z should be adjusted to avoid bed collision if other nozzle is lower than current.
2) Since no move no bed level matrix should be applied
When SWITCHING_NOZZLE is enabled and system is homed there are two movements to go to destination, but first can move Z to older position and then crash on the bed
2017-11-20 16:39:32 -06:00
Bob-the-Kuhn
12b018e619
Merge pull request #8487 from Bob-the-Kuhn/M43-compatibility-1.1.x
...
[1.1.x] M43 end pin correction/compatibility
2017-11-19 11:01:10 -06:00
Bob-the-Kuhn
9b80e1e04a
change to L for end pin for M43 Toggle command
2017-11-18 13:48:53 -06:00
Scott Lahteine
bf6a1816b4
Display volumetric ratio in terms of E mm
2017-11-18 07:03:18 -06:00
Scott Lahteine
622d100c30
No retroactive changes with M851 Z
2017-11-18 03:37:07 -06:00
Thomas Moore
97c19de8b9
Fix PlatformIO dependencies
2017-11-16 15:16:21 -06:00
Scott Lahteine
4e19c59ab3
Miscellaneous cleanup
2017-11-16 01:18:05 -06:00
Scott Lahteine
d3b8f30818
Fix M32 P subroutine handling
2017-11-15 01:09:06 -06:00
Scott Lahteine
95590adf07
Make sure leveled[] is enabled for use
2017-11-14 02:12:20 -06:00
Scott Lahteine
90c7d28055
Extrudrboard support for Printrboard Rev.F
2017-11-13 15:47:03 -06:00
Scott Lahteine
8b684637bc
Merge pull request #8397 from RowanMeara/rm-M428-1.1.x
...
[1.1.x] Fix M428
2017-11-13 15:11:36 -06:00
Rowan Meara
d2df00bfca
[1.1.x] Fix compilation warnings ( #8395 )
...
* Fix up Travis CI and compile warnings/errors
* No ULTRA_LCD with REPRAP_DISCOUNT_SMART_CONTROLLER
* No point in setting all the endstop plugs
2017-11-13 04:18:19 -06:00
Scott Lahteine
25ec0fecfa
Apply native workspace fixes to G92, G53-59
2017-11-13 01:53:44 -06:00
RowanMeara
227b96b28b
Fix M428
...
This fixes the old implementation of M428 which was broken, did not
match the website, and made no sense.
2017-11-13 01:34:43 -06:00
Scott Lahteine
aa616cd410
No leveling data in M114 without leveling
2017-11-12 23:06:16 -06:00
Scott Lahteine
5926159890
Fix report_current_position
...
Thanks @RowanMeara!
2017-11-12 22:57:57 -06:00
Scott Lahteine
5cc87abb3a
Merge pull request #8381 from thinkyhead/bf1_native_followup
...
[1.1] Remove offsets from soft endstops, tool change
2017-11-11 23:13:40 -06:00
Scott Lahteine
355dfed437
Coding standard patch of M290
2017-11-11 22:16:13 -06:00
Scott Lahteine
802ae73b13
Turn off laser power pin when PWM goes to 0
2017-11-11 22:02:19 -06:00
Scott Lahteine
549c814e8d
Remove offsets from soft endstops, tool change
2017-11-11 21:28:32 -06:00
Scott Lahteine
564fbc8dec
M290 constrain patch
2017-11-11 20:50:16 -06:00
Scott Lahteine
df44bcc5ae
Use do_blocking_move_to where possible
2017-11-10 20:37:41 -06:00
Scott Lahteine
3293823642
Add pre-calculated planner.e_factor
2017-11-10 20:09:59 -06:00
Scott Lahteine
24b302c001
Fix cold/lengthy extrusion handling
2017-11-10 20:09:59 -06:00
Thomas Moore
4714fb8fcb
Normalize load/unload length in M600
2017-11-10 19:59:26 -06:00
Scott Lahteine
b0ff3a4c6d
Cleanup around updatePID
2017-11-10 19:17:46 -06:00
LVD-AC
8ce9306b27
PROBE_SELECTED etc.
2017-11-10 19:17:45 -06:00
Scott Lahteine
b6b4bf0959
Merge pull request #8345 from tcm0116/1.1.x-delta_height
...
[1.1.x] Add delta_height variable in lieu of using home_offset
2017-11-09 01:19:48 -06:00
Thomas Moore
658e1ebe5a
Add delta_height variable in lieu of using home_offset
2017-11-08 23:21:02 -06:00
Scott Lahteine
54963cc898
Fix _manual_goto_xy on kinematic systems
2017-11-08 23:18:55 -06:00
Scott Lahteine
ad879a1f90
Clarify some motion code
2017-11-08 23:18:55 -06:00
Scott Lahteine
2559745f54
Tweaks to core motion code
2017-11-08 20:08:20 -06:00
Scott Lahteine
87b655e59e
Fix gcode_get_destination E axis
2017-11-08 12:50:40 -06:00
Roxy-3D
6ee4ba6932
We need motion even with !HAS_MESH ( #8330 )
...
Thank You MagoKimbra !
2017-11-08 09:58:18 -06:00
Scott Lahteine
1d0739d6d1
Patch G33 misuse of PROBE_MANUALLY
2017-11-07 22:28:54 -06:00
Scott Lahteine
5fe15c7f10
Patch abuse of sprintf_P in G33
2017-11-07 17:35:32 -06:00
Scott Lahteine
abb15bc30a
Followup patch for G92
2017-11-07 13:08:38 -06:00
Scott Lahteine
e4466b55b5
Fix G92 for native workspace
2017-11-07 12:27:05 -06:00
Scott Lahteine
26ebeadfaa
Eliminate some compiler warnings
2017-11-06 22:41:27 -06:00
Scott Lahteine
30e4b85587
Fix M118 parameters, with strict guideline
2017-11-06 22:41:27 -06:00
Scott Lahteine
44edffa0a9
Fix SLOW_PWM_HEATERS, issues already patched in 2.0.x
2017-11-06 22:40:44 -06:00
Roxy-3D
12151e62ee
Fix G26's circle drawing... ( #8291 )
...
* Fix G26's circle drawing...
This mostly catches the bugfix-v1.1.x branch up to bugfix-v2.0.0
I'll have to do something similar to get bugfix-v2.0.0 caught up to
bugfix-v1.1.x
* only use planner.leveling_active if appropriate
2017-11-06 18:26:47 -06:00
Scott Lahteine
efc1029226
Update bilinear for native workspace
2017-11-06 17:03:34 -06:00
Scott Lahteine
1b09733e7c
Fix FWRETRACT un-hop
2017-11-05 18:33:10 -06:00
Scott Lahteine
8ab368559a
Implement CNC_COORDINATE_SYSTEMS
2017-11-04 22:30:23 -05:00
Scott Lahteine
91abf07087
Cleanup and fix G33
2017-11-04 22:30:23 -05:00
Scott Lahteine
64f077fd2a
Remove I2CPEM workspace offset
2017-11-04 22:00:45 -05:00
Scott Lahteine
f9f0ee0f21
Update G2/G3 Workspace Planes
2017-11-04 14:35:25 -05:00
Scott Lahteine
640526f0c8
Operate in Native Machine Space
2017-11-03 22:40:30 -05:00
AnHardt
13a3fb1acc
Some cleanup around 'lcd_bootscreen()' and 'lcd_kill_screen()'
...
Move 'lcd_bootscreen()' from `lcd_init()` to 'setup()' where it is cexecute exactly once. Saves 'bool show_bootscreen'.
Move the call of 'lcd_custom_bootscreen()' to the begin of 'lcd_bootscreen()'.
Move the delays into the related functions.
Move the picture loop around 'lcd_kill_screen()' into the function.
2017-11-03 12:16:42 +01:00
Scott Lahteine
343dd1c0b8
Remove G33 trailing whitespace
2017-11-03 04:06:38 -05:00
Luc Van Daele
0e4b6b373d
[1.1.x] G33 magic numbers ( #8173 )
...
* [1.1.x] G33 magic numbers
* oops
* comments
* oops
* warning
* better comment section
* remarks
* extra grids
2017-11-03 03:35:53 -05:00
jmdearras
3e9504d306
Fix case light "off" function ( #8205 )
...
* Fix case light "off" function
It would only turn the light off if brightness was 255
* Update Marlin_main.cpp
2017-11-01 21:17:23 -05:00
Scott Lahteine
4bf0e15653
Allow asterisks in G-Code commands
...
Addressing #6655
2017-10-31 21:14:56 -05:00
GMagician
15be1cb9a9
[1.1.x] Fix NO_MOTION_BEFORE_HOMING unwanted behaviour ( #8177 )
...
* [1.1.x] Fix NO_MOTION_BEFORE_HOMING unwanted behaviour
NO_MOTION_BEFORE_HOMING should prevent XYZ movements only when homing is not done.
E axes should be allowed
* Update Marlin_main.cpp
* Update Marlin_main.cpp
* Update Marlin_main.cpp
2017-10-30 22:50:50 -05:00
Scott Lahteine
893092ff7f
Kinematic clamp_to_software_endstops
2017-10-30 16:24:45 -05:00
Scott Lahteine
46ed54cd8e
Include time scale in some planner vars
2017-10-29 18:48:14 -05:00
Scott Lahteine
daa85f71e1
Merge pull request #8123 from thinkyhead/bf1_dual_xyz_endstops
...
[1.1.x] Dual endstops XYZ
2017-10-29 04:36:09 -05:00
Scott Lahteine
318c419f77
Implement support for Dual X and Y endstops
2017-10-29 03:49:45 -05:00
LVD-AC
77cf42588f
(1.1.x) serious bug G33
2017-10-29 00:22:55 +02:00
Luc Van Daele
e64cfb13b8
(1.1.x) auto tune calibration parameters ( #8031 )
...
* auto tune calibration parameters
* solve warnings
* Tweaks to formatting
* review Thinkyhead
* Error
2017-10-26 23:49:20 -05:00
Scott Lahteine
2296d98845
Tweak neopixel self-test
2017-10-26 22:46:11 -05:00
Scott Lahteine
6569b9ba56
Fix FWRETRACT logic, apply common sense
2017-10-26 22:36:41 -05:00
Scott Lahteine
355ebec92d
Fix position sync in M600 pause/resume
2017-10-24 14:41:54 -05:00
Roxy-3D
e9bc9a2ab4
change to better (more clear) names ( #8049 )
...
set_destination_to_current() changed to set_destination_from_current()
set_current_to_destination() changed to set_current_from_destination()
2017-10-21 10:58:17 -05:00
tweichselbaumer
fa44130734
Add M290 babystepping ( #8014 )
...
* Add M290 babystepping
* Allow `Z` for `M290`
* fix spacing
* Support BABYSTEP_XY in M290
* Not just Z
* Extend M290 for BABYSTEP_ZPROBE_OFFSET
* tweak
2017-10-21 03:58:53 -05:00
Luc Van Daele
2a88a3fd33
boolval revised ( #8017 )
2017-10-18 14:19:01 -05:00
studiodyne
e04902f589
Add EXTRA_FAN_SPEED feature
2017-10-16 02:32:30 -05:00
Scott Lahteine
d63d08ef8b
Merge pull request #7948 from gallynero/patch-1
...
Enable change feedrate in delta
2017-10-15 16:28:45 -05:00
Scott Lahteine
5c2ff6ed19
Add Capability BUILD_PERCENT
2017-10-15 03:01:36 -05:00
Scott Lahteine
5f708d47ce
Add LCD_SET_PROGRESS_MANUALLY
2017-10-15 02:21:09 -05:00
Scott Lahteine
060d16d26b
Split the software endstop capability by axis.
...
Based on #7975 and #7979
2017-10-14 17:14:08 -05:00
Scott Lahteine
b8ddae61e2
ubl_state no longer needed
2017-10-14 02:39:13 -05:00
Scott Lahteine
b07a2aa23c
Add HAS_MESH conditional
2017-10-14 02:39:12 -05:00
Scott Lahteine
88857e8028
Move fade_scaling_factor_for_z to Planner
2017-10-14 02:10:46 -05:00
Scott Lahteine
8e808fcadc
General cleanup, apply const
2017-10-13 16:13:36 -05:00
Scott Lahteine
da93a272a0
Move leveling_is_active to a macro
2017-10-13 16:11:27 -05:00
gallynero
94228d4522
Enable change feedrate in delta
...
Enable change the relative feedrate on a printing job in delta machines with UBL
2017-10-12 01:55:51 +02:00
Slawomir Ciunczyk
167058b61f
Different NEOPIXEL types
...
Changes to support NEOPIXEL LED strips
- Support for different NEOPIXEL as defined in Adafruit_NeoPixel.h
- ability to setup startup brightness
- ability to define sequential/non-sequential transition of color change during heating-up
- additional parameter to M150 P<brightness>
2017-10-10 01:58:40 -05:00
jmdearras
c7e0a49c94
Add some new LCD displays
...
- Original CR-10
- MKS Mini Display
2017-10-09 17:39:03 -05:00
LVD-AC
355cba4aa7
Fixes for G33
2017-10-06 15:52:53 -05:00
Scott Lahteine
a47c5c093d
Merge pull request #7459 from ejtagle/xon-xoff-sdxfer
...
[1.1.x] XON/XOFF serial handshake (for faster transfers to SD)
2017-10-02 23:52:41 -05:00
Scott Lahteine
4c34b3ad9c
Stop redundant E4_IS_TMC2130 current control
2017-10-02 23:10:34 -05:00
Scott Lahteine
1b8b5c4b06
Make prepare_move_to_destination_dualx a full move function
2017-10-02 23:10:18 -05:00
Scott Lahteine
4e19ff75b6
XON/XOFF corrections, tweaks, formatting, etc.
2017-10-02 03:52:42 -05:00
Scott Lahteine
f365448338
Merge pull request #7811 from thinkyhead/bf1_fix_resume_print
...
[1.1.x] Fix broken M600 resume_print
2017-10-01 22:54:34 -05:00
GMagician
33d28c24bf
Implementing [FR] #7548
...
Added new configuration to inhibit XYZ movements when home is not done
2017-10-01 21:02:42 -05:00
MasterPIC
40a4a716e1
Fix filament change bug in resume_print
...
Expected behaviour: while (auto)extruding the new filament, the nozzle should not move. It should move (from filament replacement position to printing position) only after the user has confirmed the successful filament replacement and extrusion.
Actual behaviour: while (auto)extruding the new filament, the nozzle moves from filament replacement position back to printing position.
So the extrusion step is mixed with the movement required to go back to the printing position.
The provided code seems to be working but probably a better fix is required.
2017-10-01 18:42:29 -05:00
Scott Lahteine
802f147686
Remove some excess whitepsace
2017-10-01 18:25:04 -05:00
Scott Lahteine
80a0f935a1
Fix G10-G11 by adding a synchronize
...
Based on #7792 by @tcm0116
2017-09-30 17:46:31 -05:00
Scott Lahteine
9bbc2df217
General code cleanup, spacing
2017-09-24 16:52:41 -05:00
Luc Van Daele
74d430cb97
matrix names update ( #7697 )
...
* matrix names update
* symplified names
* new angle normalization
* ABC
* axis
* least squares
* recalc_delta_settings
* endstop_adj
* 0p
* bug
2017-09-24 01:45:31 -05:00
Scott Lahteine
0afd25a010
Fix caselight compile issues
2017-09-23 22:00:44 -05:00
Scott Lahteine
367e1b54ba
Merge pull request #7591 from thinkyhead/bf1_misc_patches
...
M111: no args reports current flags
2017-08-31 15:19:29 -05:00
Scott Lahteine
8a184a526a
Marlin: Patch G33, allow M111 to give status
2017-08-31 14:35:00 -05:00
Scott Lahteine
898f48e331
CNC workspace planes for G5
...
According to LinuxCNC, G5 should throw an error if the current plane mode isn't XY.
2017-08-31 14:29:29 -05:00
Roxy-3D
3f0b38ed5d
Add Max7219 LED Matrix Debug Support ( #7563 )
...
* Add Max7219 LED Matrix Debug Support
The Max7219 8x8 LED Matrix's are very helpful for debugging new code.
And for that matter, just trying to maximize printer settings without
causing stuttering.
The displays are very inexpensive (under $2.00 with shipping) and
provide a lot of help when trying to debug complicated code.
* Try to keep Makefile up to date.
2017-08-25 17:03:07 -05:00
GMagician
0067bb2840
Addressing #7552
...
When M405 is used it changes 'volumetric_multiplier[FILAMENT_SENSOR_EXTRUDER_NUM]' value. When M406 disables M405 it leaves the value unchanged.
This PR applies 'calculate_volumetric_multipliers' in M406 instead of resetting it to 1.0 because M200 may not be compatible with M405 hence I'm sure to restore anyway with correct value.
2017-08-25 03:23:16 -05:00
Scott Lahteine
2b12093589
Merge pull request #7532 from thinkyhead/bf1_fan_mux_vben
...
New feature: Part-Cooling Fan Multiplexer
2017-08-25 03:16:40 -05:00
Scott Lahteine
e337df2e98
Miscellaneous tweaks to serial outputs, code cleanups
2017-08-23 18:32:58 -05:00
Vben
c0409b85e7
New feature: Part-Cooling Fan Multiplexer
2017-08-18 15:59:04 -05:00
GMagician
b94a1c6b9f
Code reduction this some configurations
...
When switching noozle and extruder but these operations are done by the same servo in 'setup' function there is a unnecessary call
2017-08-18 11:11:00 +02:00
Vben
4817b39d98
Added new feature for AutoParking Extruder (APE)
2017-08-16 17:33:11 -05:00
Scott Lahteine
385f1bb9e5
Merge pull request #7504 from thinkyhead/bf1_servo_delays
...
Individual servo delays
2017-08-16 16:05:22 -05:00
Scott Lahteine
30887feae3
Tweak some formatting in ABL G29
2017-08-16 02:51:00 -05:00
Thomas Moore
257b693ab0
Advanced pause fixes ( #7518 )
...
* Disallow filament change while paused
* Use kinematic movemements in pause_print and resume_print
2017-08-15 22:57:13 -05:00
Scott Lahteine
06541ec885
Merge pull request #7448 from thinkyhead/bf1_delta_fixes
...
Prevent damage if DELTA_HEIGHT is set badly
2017-08-15 16:35:09 -05:00
Scott Lahteine
96ae53cf41
Use MOVE_SERVO macro where possible
2017-08-15 00:28:39 -05:00
Scott Lahteine
ac76101ec3
Eliminate goto in gcode_M48
2017-08-11 17:00:40 -05:00
Scott Lahteine
75e6ead5fd
Eliminate goto in gcode_G33
2017-08-11 17:00:40 -05:00
Scott Lahteine
6bd63d27b5
Updates to G29 for probe error handling
2017-08-11 17:00:40 -05:00
Thomas Moore
f54e0fc90f
Prevent damage if DELTA_HEIGHT is incorrect
2017-08-11 16:09:14 -05:00
Scott Lahteine
0938c62b48
Neater position_is_reachable call
2017-08-11 15:55:32 -05:00
etagle
2864ef8c7f
Slight improvement to the line parsing logic, saving 8 cycles per character
2017-08-08 02:57:55 -03:00
etagle
534bbb81ff
Adding XON/XOFF and STATISTICS implementation
2017-08-08 02:46:37 -03:00
Øystein Krog
e948f77cf9
Fix DUAL_X_CARRIAGE not moving at all
...
Axis would only move when homing.
Bug introduced in 91841d75c9Fixes #6956 , fixes #7050 and fixes #7291
2017-07-31 18:44:26 +02:00
Scott Lahteine
08b0456d91
Merge pull request #7379 from thinkyhead/bf_manual_bed_level_floor
...
Manual Bed Leveling: Goto previous Z height at each probe point
2017-07-30 05:41:12 -05:00
teemuatlut
936d00dda8
Implement probing delay for piezo sensors
2017-07-29 21:46:40 -05:00
Scott Lahteine
29eef360d0
Merge pull request #7308 from thinkyhead/bf_cleanup_config_adv
...
Fixes for FWRETRACT
2017-07-29 21:20:19 -05:00
Wilfried Chauveau
894608f8a3
Manual Bed Leveling: Goto previous Z height at each probe point
2017-07-29 21:15:37 -05:00
Scott Lahteine
bfd396c13a
Patch to fix some compiler warnings
2017-07-28 02:27:16 -05:00
Scott Lahteine
48c5f3dddf
Tweak kill action #ifdef
2017-07-27 23:42:01 -05:00
Scott Lahteine
be7a9a07c5
Don't reset grid with G29 Q + PROBE_MANUALLY
2017-07-27 22:47:43 -05:00
Scott Lahteine
4eff18854b
Rename options with swap_ prefix
2017-07-27 04:14:29 -05:00
Scott Lahteine
14482d2f2a
Strip auto-retract for impossible M(IN|AX)_AUTORETRACT combo
2017-07-27 04:14:29 -05:00
Scott Lahteine
9fc72422e4
Don't let the flow multiplier affect retract/recover length
2017-07-27 04:14:29 -05:00
Scott Lahteine
fee696db5d
Improve retract() for G10/G11/autoretract
2017-07-27 04:14:29 -05:00
Scott Lahteine
423b0f3a1e
Replace MIN_RETRACT with MIN_AUTORETRACT, MAX_AUTORETRACT
2017-07-27 04:14:29 -05:00
Scott Lahteine
51864fd365
Add bed size as a configuration option
2017-07-26 23:04:54 -05:00
C. Scott Ananian
890e7a16a9
Add support for Printrbot Neopixel RGBW strip.
...
Connected as described at http://printrbot.com/shop/led-strip/
Based on patch by Kelly Anderson <kelly@xilka.com> at
http://www.xilka.com/printrbot/marlin/1.1.4/20170707/
2017-07-22 16:07:55 -05:00
Scott Lahteine
b7a16e4468
Merge pull request #7315 from fixoid/patch-1
...
Fixing SWITCHING_EXTRUDER feature to work with HOTENDS > 1
2017-07-21 19:10:54 -05:00
Scott Lahteine
b0173ccdb9
Drop extra initializers for vars initialized by EEPROM code
2017-07-20 22:57:49 -05:00
Scott Lahteine
7afafb05b8
Split G10/G11 into separate functions
2017-07-20 02:24:13 -05:00
Scott Lahteine
c45798694f
Add some more requirements to the G-code list
2017-07-20 02:24:13 -05:00
Scott Lahteine
72de280c1e
BARICUDA valve pressure consistently uint8_t
2017-07-20 02:21:40 -05:00
Scott Lahteine
4d98e3f0a7
General cleanup
2017-07-20 02:21:40 -05:00
fixoid
e530c67349
Fixing SWITCHING_EXTRUDER feature
2017-07-19 21:15:26 +03:00
Roxy-3D
37a6833d7e
Allow the sampled point to be added into the Least Squares Best Fit ( #7289 )
...
Without this... The LSF won't work because none of the sampled points
in this code block get added.
2017-07-13 16:33:02 -05:00
Scott Lahteine
0873c667fa
Apply coding standards to recent merges
2017-07-13 00:46:16 -05:00
Scott Lahteine
8c2907d10f
Fix ABL broken by recent change
2017-07-12 22:56:18 -05:00
Roxy-3D
9af67e2446
Save 7714 bytes of program memory when doing AUTO_BED_LEVELING_LINEAR ( #7276 )
...
We can save more and a pile of RAM by eleminating the eqnBVector and
EqnAMatrix arrays next.
2017-07-10 19:05:11 -05:00
LVD-AC
4bc79ec877
Updates for G33-LCD interface
2017-07-07 05:00:59 -05:00
João Brázio
2065591daf
Add support for BQ heated bed kit with Hephestos 2
2017-07-07 03:10:38 -05:00
Scott Lahteine
5ef1e5ef60
Tweaks for M43
2017-07-06 21:47:50 -05:00
Scott Lahteine
c7732db99d
Fix: Use of digitalRead, digitalWrite breaks on AT90USB
2017-07-06 21:25:56 -05:00
Scott Lahteine
f713f25fa5
Clean up excess whitespace
2017-07-06 21:24:30 -05:00
Scott Lahteine
fc9ce65095
Add BUSY_WHILE_HEATING for hosts that need it
2017-07-06 16:28:57 -05:00
Scott Lahteine
11c589c3ec
Fix compile issue with G38
...
Fixes #7250
2017-07-06 14:21:27 -05:00
Scott Lahteine
678914be25
Patch M23 to work around Simplify3D bug
...
Addressing #7227
2017-07-06 14:00:58 -05:00
LVD-AC
3efe4aeef8
Add PROBE_MANUALLY support to G33
2017-07-04 18:06:54 -05:00
Scott Lahteine
a2babb532d
Merge pull request #7217 from benlye/add-kill-action
...
Add configurable action command to send when printer is killed
2017-07-04 16:44:08 -05:00
Ben Lye
c28749a567
Add kill action
...
Sends pre-defined string as action command when printer is kill.
2017-07-03 23:45:19 +01:00
Scott Lahteine
df87278fce
Add "CAP:PRINT_JOB:1" (M75 / M76 / M77) to M115 output
2017-07-03 15:59:06 -05:00
LVD-AC
567941e341
Fix for issues #6997 and #7152
...
Probing with the effector in the printing area, but an eccentric probe (e.g. allen key) outside it but still touching the bed gives meaninfull information for calibration. Since calibration is most accurate when probing as close to the towers as possible the testing was way to restrictive hence this fix.
2017-07-03 02:53:49 -05:00
Scott Lahteine
6a3967ee33
Corrections for probe_pt parameters
2017-07-03 01:34:27 -05:00
Scott Lahteine
534bffa7a9
Correct comment on ABL G29
2017-07-03 01:13:07 -05:00
Scott Lahteine
e1e1a0c344
Provide a default CUSTOM_BOOTSCREEN_TIMEOUT
2017-07-03 01:13:07 -05:00
Scott Lahteine
d609489b22
Drop setup_homepin
2017-07-02 02:27:09 -05:00
Scott Lahteine
ae5923a3d0
Make lcd_bootscreen common to both
2017-07-02 00:47:36 -05:00
Scott Lahteine
dcec7178d1
Expose DISABLE_M503 option as a test option
2017-07-01 21:31:28 -05:00
Scott Lahteine
f17bae1f70
Changes for ubl_lcd_map_control patch
2017-07-01 19:47:02 -05:00
Scott Lahteine
e3cedfa0ec
Fix a compiler warning
2017-06-28 16:41:46 -05:00
Scott Lahteine
bb0508b6cf
Fix comment in M115 code
2017-06-28 13:08:33 -05:00
Scott Lahteine
85777a56c6
Add A (action) and E (echo) parameters to M118
2017-06-28 02:07:59 -05:00
Ben Lye
98d362c2da
Adding M118 command to send text to serial
...
Allows the user to send text to the serial console in order to
communicate with a host - sending debuging information or action
commands, for example. Text must begin with '//' and this is added if
it is not already present at the beginning of the string.
2017-06-28 00:55:20 -05:00
Scott Lahteine
fc140c4962
Followup for I2C_POSITION_ENCODERS
2017-06-27 20:46:40 -05:00
Scott Lahteine
f4246dc8ff
Merge pull request #7165 from thinkyhead/bf_parser_shorthand
...
Use parser.seenval, add shorthand functions
2017-06-27 18:57:48 -05:00
Scott Lahteine
05449cf6ee
Add shorthand value accessors to gcode.h
2017-06-27 18:39:41 -05:00
Scott Lahteine
12f092c812
Cleanups to gcode.h, use seenval()
2017-06-27 17:57:00 -05:00
Scott Lahteine
941943c167
Apply const, spacing, etc.
2017-06-27 05:23:49 -05:00
Scott Lahteine
5b11b33854
Add support for Průša MK2 Multiplexer
2017-06-27 04:55:30 -05:00
Scott Lahteine
c2c8aafda2
Merge pull request #7157 from thinkyhead/bf_g33_f_parameter
...
G33 F and Height bug fix
2017-06-27 04:36:22 -05:00
Scott Lahteine
f0f9fb7465
Remove line that does nothing
2017-06-27 04:08:50 -05:00
LVD-AC
99592c8458
Update G33: Add F, fix height bug
2017-06-27 04:02:02 -05:00
Ben Lye
31514f453a
Fix #ifdef AVR_AT90USB1286_FAMILY in pinsDebug
...
Can't compile with PINS_DEBUGING enabled on Atmega1284p because it tries
to enumerate pins 46 and 47 (which don't exist) because `#ifdef
AVR_AT90USB1286_FAMILY ` doesn't work as expected.
2017-06-27 08:04:40 +01:00
Scott Lahteine
3c7bfe798d
Various cleanups ahead of digipot save
2017-06-24 23:56:24 -05:00
Scott Lahteine
80a232419d
CNC workspace planes and 'P' argument for G2/G3
2017-06-23 14:53:03 -05:00
Scott Lahteine
5fb0d401eb
Formatting tweaks
2017-06-23 14:53:02 -05:00
Scott Lahteine
a9f8e518bf
Fix FILAMENT_WIDTH_SENSOR infinite loop issue
...
Addressing #6992 and #5851
2017-06-23 14:53:01 -05:00
Scott Lahteine
5c59ee4e93
Use current (raw) Z if omitted from G29 WXY or G29 WIJ.
2017-06-20 00:10:52 -05:00
Scott Lahteine
37bc0fce62
Make G29 compatible with M206 Z and G92 Z
...
Use the raw position for mesh measurement. Otherwise the `M206` and
`M92` Z offsets will get canceled out by bed leveling. The downside is
`G29` will not compensate for a poorly set small `M206` fudge value.
To elaborate on this issue, imagine you are probing with a Z home
offset of -0.1, meaning when Z homes, -0.1 is the current position,
implying the ideal bed zero for the nozzle is 0.1mm higher than the Z
endstop. Ordinarily when printing, Z would raise 0.1mm higher.
What happens when we probe is that all points are measured with that
-0.1 included. So when bed leveling is enabled the `M206 Z` offset gets
exactly canceled out by the bed readings.
2017-06-20 00:09:59 -05:00
Scott Lahteine
6c45d0fd81
Apply maths macros and type changes ahead of HAL
2017-06-19 22:57:42 -05:00
Florian Heilmann
6dcf42f1a7
Add Z Fade Height to M420 output if it is enabled ( #7042 )
...
* Add Z Fade Height to M420 Output
Echo the z-fade height when M420 is called, if it is enabled.
* Fix Whitespace
* Fix Compiler complaint
* Missing semi-colon
2017-06-19 17:53:07 -05:00
Scott Lahteine
907cafcbfd
Support for two switching extruders
2017-06-19 17:20:59 -05:00
Scott Lahteine
4c3dc8bf07
Remove set_current_to_destination from resume_print
...
Addressing #7057
2017-06-18 23:01:13 -05:00
Scott Lahteine
4857a3ba48
Formatting and spelling
2017-06-18 23:01:12 -05:00
Thomas Moore
3d24c329af
M600 fixes
2017-06-18 23:00:56 -05:00
Scott Lahteine
d4270f15a9
Spacing tweak in setup()
2017-06-16 14:21:05 -05:00
Jim Brown
3d043976f7
Add option to disallow filament change without homing first
2017-06-16 13:32:17 -05:00
Scott Lahteine
428be27893
Formatting adjustments
2017-06-15 15:25:24 -05:00
Scott Lahteine
7164fd499e
Tweak to G33 P error
2017-06-15 14:43:40 -05:00
Scott Lahteine
c10d763d98
Simpler prepare move conditions
2017-06-15 14:43:40 -05:00
Scott Lahteine
09bc34f4dc
Allow arbitrarily long retraction
2017-06-15 14:43:30 -05:00
Scott Lahteine
4414825e0d
Merge pull request #7038 from thinkyhead/bf_PCA9632
...
PCA9632 PWM color LED support
2017-06-15 14:41:24 -05:00
Bob-the-Kuhn
9dda022705
fix compile errors
...
================================
Changed to conditional compile for AT90USB issue
2017-06-15 13:18:14 -05:00
Jim Brown
26d20ebcfc
Don't allow filament change without homing first ( #7054 )
2017-06-13 17:11:37 -05:00
Roxy-3D
824f71d503
LCD Panel Interactive Mesh Editing ( #7045 )
...
Original Mesh Bed Leveling replacement put at top of UBL Menu Options to
help facilitate the removal of the Original Mesh Bed Leveling.
Radar display (and control) of the UBL Interactive Mesh Editing.
2017-06-12 18:26:49 -05:00
Scott Lahteine
699aa35df6
Code cleanup for G33
2017-06-12 01:25:40 -05:00
dot-bob
0bc66bf22c
PCA9632 PWM color LED support
...
Add support for the PCA9632 PWM color LED driver used on the Ultimaker 2 and Wanhao Duplicator 6.
2017-06-12 01:09:24 -05:00
Luc Van Daele
896dfa0577
G33 eccentric probe fixes ( #6850 )
...
* excentric probe config fix
* undo last commit
* eccentric probe fix
* oops
* !stow after each probe
* deploy/stow fix
* E parameter + bit of cleanup
* comment
* LCD menu fix
2017-06-12 01:07:19 -05:00
Scott Lahteine
da8e946efb
Reduce size of heater state print code
2017-06-10 20:26:17 -05:00
Scott Lahteine
748bf32388
Unify AVR90USB: pinsDebug changes
2017-06-09 19:20:16 -05:00
Scott Lahteine
e94f79ccea
Patch some serial macros
2017-06-09 17:17:23 -05:00
Thomas Moore
897bc2ac1f
Updates for ensure_safe_temperature ( #6963 )
...
* Updates for ensure_safe_temperature
* M600 fixes
2017-06-09 15:19:08 -05:00
bgort
2f55870edb
[New Feature] I2C position encoder support ( #6946 )
...
* [New Feature] I2C position encoder support
I plan to continue improving/cleaning this up, as there areas that need work.
* let the cleanups begin.
* progress
* more progress
* comments, rename files, etc.
* clean
* Cleanups per thinkyhead
* a few more cleanups
* cleanups, bugfixes, etc.
* remove unnecessary passes_test(), additional cleanups/optimizations
* cleanups
* misc.
* Fix up I2CPEM.init() and a few other things.
* organize, fix, rename, etc.
* more optimization
* a few more tweaks
2017-06-09 08:06:23 -04:00
Bob-the-Kuhn
8d1d9040b6
add static
2017-06-08 14:59:21 -05:00
Kai
c2eff60d3f
Fix for #6980
...
Line 7830 prevented successfull compilation when #define CASE_LIGHT_ENABLE is uncommented
2017-06-08 09:19:04 +02:00
Scott Lahteine
a27b08e6af
Various code style tweaks
2017-06-07 16:07:38 -05:00
Scott Lahteine
dac29e0f75
Cleaner failure of UBL without EEPROM
2017-06-07 16:07:38 -05:00
Scott Lahteine
c9e3caf928
Save lots of PROGMEM, ~20b SRAM with DIGIPOT_I2C
2017-06-07 16:07:38 -05:00
Scott Lahteine
36cc03a9b4
Save 224b PROGMEM, 48b SRAM in get_homing_bump_feedrate
2017-06-07 16:07:38 -05:00
Scott Lahteine
e6d10f6ddd
Spend 48b PROGMEM to save 16b SRAM
...
...by moving `homing_feedrate_mm_s` to PROGMEM.
2017-06-07 16:07:38 -05:00
Scott Lahteine
97e13a30ba
Save over 100 bytes SRAM in pin_is_protected
2017-06-07 16:07:38 -05:00
Scott Lahteine
efc198f952
Spacing, const, comments
2017-06-07 16:07:38 -05:00
Scott Lahteine
4406fba994
Fixes #6975
2017-06-07 11:14:30 -05:00
Scott Lahteine
eb8af486d2
Ensure safe temperature for M600
2017-06-04 17:25:16 -05:00
Scott Lahteine
6411d65c48
Fix Morgan SCARA S2 calculation
2017-06-04 12:24:09 -05:00
Scott Lahteine
5938dae200
Merge pull request #6950 from MagoKimbra/fix_g29_3_point
...
Fix G29 with 3 point
2017-06-04 12:15:44 -05:00
Scott Lahteine
c5e0f08e35
Merge pull request #6951 from fixoid/patch-4
...
Initializing extruder/nozzle servo when turning on the printer
2017-06-04 12:13:05 -05:00
Scott Lahteine
e4937b0285
Cleanup of spacing and formatting
2017-06-04 11:31:43 -05:00
fixoid
1aab9906e6
Initializing extruder/nozzle servo when when turning on the printer
2017-06-04 16:57:24 +03:00
MagoKimbra
663ff7f92a
Fix G29 with 3 point
2017-06-04 14:39:31 +02:00
oldmcg
9f295581f0
Ubl delta fixes and improvements ( #6941 )
...
* Change all direct changes of ubl.state.active to
set_bed_leveling_enabled() which handles apply/unapply
leveling to maintain current_position consistency.
Fix invalidation of UBL mesh to invalid unreachable
mesh points as well (delta corners).
Fix UBL_DELTA unapply_leveling logic and when
it gets applied, including fade_height changes.
Add optional M114 D for detailed position information,
disabled from compilation by default (M114_DETAIL).
* UBL_DELTA raw and inline kinematics
* UBL planner fall through fix
* consistent variable names
* Cleanup orphaned code and whitespace changes.
Use _O2.
* compile warnings cleanup
* Remove redundant #ifdef condition
2017-06-03 17:11:43 -05:00
Scott Lahteine
fc7d7f87b4
Init probe test pin with FastIO
2017-06-02 23:45:52 -05:00
Thomas Moore
a32f7b329c
Fix heater status display for advanced pause
2017-06-01 12:29:47 -05:00
Bob-the-Kuhn
9657e7d3ee
copied file changes from PR #5685
...
==============================
Configuration_adv.h changes
==============================
add "live" LCD update
==============================
P & S version
==============================
final (hopefully) tested version
==============================
update M115 capabilities print
==============================
Menu changes portion of the requested changes
==============================
changed USEABLE_HARDWARE_PWM from a function to a series of macros
==============================
changes per review
2017-05-31 13:22:38 -05:00
Scott Lahteine
7236109f2a
Patch M24 / M125 for delta
2017-05-30 23:07:29 -05:00
Scott Lahteine
9677f3f2f5
Patch up LCD Bed Leveling menu
2017-05-29 17:51:11 -05:00
Scott Lahteine
c6a7adc293
Patch G29 A and Q arguments to bypass setup
2017-05-29 17:51:10 -05:00
Scott Lahteine
4cece2d72e
Use NAN for G29 W omitted parameters
2017-05-29 17:51:10 -05:00
Scott Lahteine
2d71569138
Fix spacing in JSON output
2017-05-29 17:51:10 -05:00
Scott Lahteine
b2d3c8aedd
Have G28 do a refresh of the display
2017-05-29 17:51:10 -05:00
Scott Lahteine
50ab9c2e04
General cleanup of spacing, comments
2017-05-29 15:34:14 -05:00
Scott Lahteine
194f8b2f55
Start at Z=0 in manual probing
2017-05-29 15:31:01 -05:00
Scott Lahteine
d013bddfa8
Merge pull request #6876 from thinkyhead/bf_extend_leveling_menu
...
Extend the ABL/MBL Bed Leveling menu
2017-05-28 14:19:02 -05:00
Scott Lahteine
01e7e234c6
Add more options to the Bed Leveling menu
2017-05-28 14:04:28 -05:00
Scott Lahteine
a3645ec921
Reference op with variable name
2017-05-28 11:33:22 -05:00
Scott Lahteine
493f0b0c62
Fix some compiler warnings
2017-05-28 11:06:33 -05:00
Thomas Moore
fb5e0ffe16
Unify M600 and M125 pause features ( #6407 )
...
* Unify M600 and M125 pause features
* Cleanup per thinkyhead's comments
* Rename filament_change_menu_response to advanced_pause_menu_response
* Include HAS_BED_PROBE in QUIET_PROBING
* Update gMax example file
* is_idle() is out of scope without the braces
* Convert FT-i3-2020 to Advance Pause names...
* Allow pause even if not printing
2017-05-26 13:01:02 -05:00
Scott Lahteine
b3a97b5013
Patch up LCD level bed menus
2017-05-25 23:53:31 -05:00
Scott Lahteine
78af2b1444
Fix PROBE_MANUALLY via G-code
2017-05-25 23:53:31 -05:00
Scott Lahteine
361cbba113
Use M665 to set SCARA angle offsets
2017-05-24 17:49:24 -05:00
Scott Lahteine
5ed63a5724
Apply const in prepare_kinematic_move_to
2017-05-24 17:49:24 -05:00
Scott Lahteine
f4028fe088
New GCode Parser - Implementation
2017-05-23 14:15:10 -05:00
Scott Lahteine
2881f0a48d
Fix, extend G42 with P (probe) parameter
...
- Also fix handling of SCARA and misuse of `codenum`.
2017-05-23 04:55:42 -05:00
