3DPrinting/MarlinFirmware
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-11-30 07:17:59 +00:00
Code Issues Releases Wiki Activity
10,195 Commits 21 Branches 81 Tags 1.9 GiB
1b5f1487c9
Commit Graph

209 Commits

Author SHA1 Message Date
Scott Lahteine
3a216bb962
CR10mini E steps of 95 
See https://www.patreon.com/posts/creality-cr10-24602624
 2019-02-10 14:24:59 -06:00
Ondřej Nový
c0a6f013de [1.1.x] Level bed corners Z-hop height option (#12859) 2019-01-10 19:25:02 -06:00
swilkens
feb2165feb [1.1.x] Correct Ender 3 bed size (#12768) 2018-12-30 10:42:06 -06:00
swilkens
82c5c85c0f [1.1.x] Reduce HOMING_FEEDRATE_XY for Ender 3 (#12104) 
Homing on the Ender 3 with `HOMING_FEEDRATE_XY` set to 50*60 was shown (#12074) to cause the end-stop micro-switches to bottom out, causing the carriage for both X and Y axis to physically crash into the micro switch. Reducing the homing speed prevents the switches from bottoming out.
 2018-10-16 01:51:14 -05:00
Scott Lahteine
5b8dc39506
[1.1] Fix mixing extruder g-codes (#11864) 2018-09-18 00:44:34 -05:00
Scott Lahteine
da5e69693d Update some config comments 2018-09-15 23:17:59 -05:00
teemuatlut
b4efefea8b [1.1.x] Fix TMC2208 SW serial communication (#11548) 
* New TMC2208 constructor
* Update default driver configuration
 2018-08-14 18:44:17 -05:00
Scott Lahteine
77625654f4 Reduce max accel in Creality configs 2018-08-11 22:57:44 -05:00
silentninja1
4c4fffc503 [1.1.x] Fix Dual X Carriage tool change crash (#11425) 2018-08-03 20:47:19 -05:00
Scott Lahteine
888d319145 Align some config options 2018-08-02 18:42:20 -05:00
Scott Lahteine
2af06b82b4 Specify some extra CR-10S pins 2018-07-25 18:18:33 -05:00
Giuliano
e5b928f574 [1.1.x] Typo fix (#11366) 
Typo fix
 2018-07-25 18:00:28 -05:00
Scott Lahteine
6d6bdc6517 Add *_DRIVER_TYPE to example configs 2018-07-25 02:39:16 -05:00
Scott Lahteine
ed0e72bf44 Fix spelling in configs 2018-07-24 21:02:22 -05:00
Scott Lahteine
221e8bbb05 Add MANUAL_PROBE_START_Z to example configs 2018-07-18 21:50:18 -05:00
Scott Lahteine
46b0e054b1 Add POWER_LOSS_PIN to example configs 2018-07-18 19:58:06 -05:00
Scott Lahteine
8f110190eb Add Z_CLEARANCE_MULTI_PROBE to example configs 2018-07-12 22:27:06 -05:00
Roxy-3D
39b3e4c501
Support for multiple Max7219 units in a chain (#11226) 
* Support for multiple Max7219 units in a chain

I'll move this support over to bugfix_2.0.0 in the next few days.   And
then look at updating the Max7219_idle() routine to make use of multiple
units in a chain.

* spelling correction
 2018-07-08 17:35:58 -05:00
Scott Lahteine
fc9f4ce2c0 Fix missing quote in language list 
Co-Authored-By: p3p <p3p@p3psoft.co.uk>
 2018-07-04 13:40:18 -05:00
Marcel Schulz
432da42dba Add thermistor 501 (100K Zonestar) 2018-07-03 18:10:55 -05:00
Scott Lahteine
84187dca5c Add "Marlin Dev Mode" option 2018-07-02 22:53:01 -05:00
Scott Lahteine
654f0bed25
Remove JUNCTION_DEVIATION_INCLUDE_E option (#11146) 2018-06-29 22:41:56 -05:00
Scott Lahteine
04fc715c91
Add minimum step dir delay option, A4988 pulse note (#11122) 
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-06-26 22:28:46 -04:00
Scott Lahteine
dc087b1132
[1.1.x] Tweaks and additions for MAX7219 (#11033) 2018-06-18 22:03:53 -05:00
Scott Lahteine
6e49901104 Adaptive and max stepping followup 2018-06-10 16:00:38 -05:00
Scott Lahteine
b7ddfddf51 Add MAXIMUM_STEPPER_RATE, enforce in multi-stepping 
The timing value should be properly set for ALL boards. The compiler will check and set maximum step rate calculations based on those values.

Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-06-10 01:56:00 -05:00
Scott Lahteine
1cdcc6adfa Adaptive multiaxis step smoothing 
- Stepper bugs fixed
- Support MIXING_EXTRUDER with Linear Advance
- Miscellaneous cleanup

Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-06-10 01:56:00 -05:00
Scott Lahteine
aab9cb0bbe Update MINIMUM_STEPPER_PULSE description 2018-06-10 00:14:39 -05:00
Scott Lahteine
08090d10b6 Drop JUNCTION_ACCELERATION from example configs 2018-05-31 20:06:37 -05:00
Scott Lahteine
a7561df3d7 Tweak configuration spacing 2018-05-26 18:31:57 -05:00
Scott Lahteine
0bfb10ffb6 Rename Junction Deviation options 2018-05-26 18:31:57 -05:00
Scott Lahteine
949ee7afe9 BEZIER_JERK_CONTROL => S_CURVE_ACCELERATION 2018-05-26 18:31:57 -05:00
Sebastianv650
815c4e7b3f Add missing config line for JUNCTION_DEVIATION (#10855) 2018-05-26 00:57:00 -05:00
Scott Lahteine
d1235033b2 Make sure FAN_ANIM_FRAMES is defined 2018-05-25 05:25:42 -05:00
Scott Lahteine
e63113e6ad Add ENDSTOP_NOISE_FILTER to example configs 
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-05-21 15:29:14 -05:00
Scott Lahteine
9d36dfceda Add FAN_MAX_PWM to example configs 2018-05-15 21:17:34 -05:00
Scott Lahteine
de0b872a24
Merge pull request #10652 from thinkyhead/bf1_bezier_jerk_control_avr 
[1.1.x] Bézier Jerk Control
 2018-05-08 11:09:19 -05:00
Scott Lahteine
f093ce35a0 Add BEZIER_JERK_CONTROL to example configs 2018-05-08 09:21:54 -05:00
Scott Lahteine
b3af5a1ac0 Add JUNCTION_DEVIATION to example configs 2018-05-08 04:43:51 -05:00
Scott Lahteine
5735c8af5b
[1.1.x] Arrange LCD options by type (#10631) 
* Bump configuration versions to 010109
* Arrange LCD options by type
 2018-05-06 19:17:29 -05:00
Scott Lahteine
675be8db7c Bring some example configs up to date 2018-05-06 03:06:13 -05:00
TheMasterFX
50ff4cf157 Fix bed size and max z pos for Ender-2 (#10603) 2018-05-02 19:02:15 -05:00
Scott Lahteine
b50afa9897 Add thermocouple with AD8495 support 
Co-Authored-By: Dmitriy <demonx@demonx.ru>
 2018-05-02 08:41:31 -05:00
Scott Lahteine
da9f3868d5
Merge pull request #10587 from thinkyhead/bf1_lcd_bed_leveling_abl 
[1.1.x] Sub-menu for ABL with LCD_BED_LEVELING
 2018-05-01 06:49:32 -05:00
Scott Lahteine
04183da302
Add Ender-3 configs (#10588) 
Co-Authored-By: thisiskeithb <13375512+thisiskeithb@users.noreply.github.com>
 2018-05-01 06:20:35 -05:00
Scott Lahteine
0b9f99f940 LCD_BED_LEVELING enables a sub-menu for ABL 2018-05-01 04:41:56 -05:00
Scott Lahteine
542baea2e1 Add units to probe speed comments 2018-04-30 23:45:34 -05:00
Scott Lahteine
f71e65aa9c Add NO_LCD_MENUS to custom configs 2018-04-30 18:39:32 -05:00
Scott Lahteine
ba8d03d241 Clean up some endstop inverting examples 2018-04-28 08:00:44 -05:00
Scott Lahteine
6b50a50676
Extra options for LEVEL_BED_CORNERS (#10484) 2018-04-22 02:30:20 -05:00