MarlinFirmware

mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-12-15 06:51:40 +00:00

Author	SHA1	Message	Date
Scott Lahteine	3021058e6d	Fix non-UTF8 Czech language	2018-02-16 22:23:29 -06:00
Scott Lahteine	bd54ce830a	Include utility.h in neopixel.cpp	2018-02-16 22:19:34 -06:00
Scott Lahteine	ff90cb409e	No space for E2 with ReARM+RAMPS Addressing #9474	2018-02-16 21:37:26 -06:00
Scott Lahteine	d7f82c8ddf	Drop extra avr/pgmspace include in _Bootscreen.h Addressing #9441	2018-02-16 18:36:35 -06:00
Scott Lahteine	1bf2b1e475	Use serial macro in sd_mmc_spi_mem.cpp for Due	2018-02-16 17:57:24 -06:00
Scott Lahteine	241e55ef3b	Apply SERIAL_FLUSH macro	2018-02-16 17:32:12 -06:00
Scott Lahteine	1f8f8c9104	Merge pull request #9657 from petrzjunior/bugfix-2.0.x [2.0.x][Language] Update Czech (Advanced pause...)	2018-02-16 02:54:06 -06:00
Thomas Moore	cff62042ee	Fix LCD manual movement on kinematic machines (#9655 )	2018-02-16 02:34:36 -06:00
teemuatlut	749bc42aa9	TMC SGT is int8 (#9651 )	2018-02-16 02:19:33 -06:00
Bob-the-Kuhn	2d749d490b	Fix / complete USE_CONTROLLER_FAN (#9666 )	2018-02-16 02:18:50 -06:00
Scott Lahteine	08d685c97a	Followup to `21e60fd`	2018-02-16 02:09:17 -06:00
Scott Lahteine	c49844df66	!ENABLED => DISABLED	2018-02-16 01:51:34 -06:00
Scott Lahteine	304e0f8945	Followup to `21e60fd` `ENABLED` only works for flag-type options. Floats must use `#ifdef`.	2018-02-15 22:24:23 -06:00
Scott Lahteine	6a70a4fbb3	Fix G26 circles (#9627 ) Easier to configure. Catch an odd divisor.	2018-02-15 22:11:26 -06:00
Bob-the-Kuhn	349dafa728	config update (set to -1)	2018-02-15 21:42:54 -06:00
Roxy-3D	21e60fd3ed	Allow user to control Z-Height correction for off mesh movements (#9661 )	2018-02-15 15:07:42 -06:00
Petr Zahradník	5d9e16ea49	Update Czech advanced pause	2018-02-15 20:22:22 +01:00
Roxy-3D	c78e1c0f23	Fix G26 Circles... (#9641 ) * Fix G26 Circles...	2018-02-15 11:15:15 -06:00
Bob-the-Kuhn	b648999528	Merge pull request #9624 from Bob-the-Kuhn/RRD-8-bit-code-to-2.0.x [2.0.x] Add delays to AVR driver for RRD Full Graphic Smart Controller	2018-02-14 22:43:17 -06:00
Marcio Teixeira	8db67d1647	Fixed compilation when using avr-gcc - avr-gcc is more strict than the Arduino IDE, it seems.	2018-02-14 15:51:25 -07:00
Marcio Teixeira	f05bd7f082	Added files missing from earlier commit.	2018-02-14 14:51:35 -07:00
Marcio Teixeira	4880ac6533	Added a light-weight status screen for the ST7920 - The status screen uses the ST7920 character generator to greatly reduce SPI traffic and MCU load when updating the status screen. - Has been tested with the RepRapDiscount Full Graphics Smart Controller but should work with any LCD that uses an ST7920 or fully compatible controller.	2018-02-14 14:43:54 -07:00
Roxy-3D	3d74ff3c87	Cartesian UBL systems should not use SEGMENT_LEVELED_MOVES There is significant downside to breaking up the long line segments on UBL Cartesian machines. It adds a lot of extra computation but worse... It cuts out all of UBL's off mesh Z-Height correction checks. There have been a large number of people complaining about the nozzle going to infinity or crashing into the bed lately. They are being caused by ``` void unified_bed_leveling::line_to_destination_cartesian() ``` not watching over the segments being queued up for movement.	2018-02-14 14:16:12 -06:00
Scott Lahteine	5dc04c5201	Fix #9361	2018-02-14 07:48:20 -06:00
AnHardt	133b38b93b	Complete M48 description (#9631 )	2018-02-14 05:17:58 -06:00
Scott Lahteine	93c0198b2d	Init LCD welcome message programmatically	2018-02-14 05:09:44 -06:00
Scott Lahteine	67a4cc610b	French update Based on #9610	2018-02-14 04:15:47 -06:00
Scott Lahteine	e7b50c89b0	Fix #9201 FILAMENT_LCD_DISPLAY can work with SDSUPPORT	2018-02-14 03:29:47 -06:00
Scott Lahteine	8d71ad37cb	flush comment to match 1.1.x	2018-02-14 02:56:18 -06:00
Scott Lahteine	272f132b82	Remove stray ` from STM32F1 HAL As noted in #8585	2018-02-14 01:06:37 -06:00
Scott Lahteine	5b70d3da1c	Update DIGIPOT_I2C_MOTOR_CURRENTS comments	2018-02-13 22:54:12 -06:00
Scott Lahteine	2ec65051fd	Fix serial comment sp.	2018-02-13 22:40:56 -06:00
Bob-the-Kuhn	9a423e9a89	tested	2018-02-13 21:59:18 -06:00
Scott Lahteine	d741bcf8a9	Tweak boards spacing	2018-02-13 03:49:28 -06:00
Scott Lahteine	f8912bb19f	French update Based on #9590 by @studiodyne	2018-02-12 01:07:47 -06:00
Scott Lahteine	e6b8207b03	Restore welcome message	2018-02-12 01:02:30 -06:00
Scott Lahteine	89165326b4	Cleanup after vim and vigor	2018-02-11 06:07:30 -06:00
Scott Lahteine	423bf9955e	Set Megatronics baud rate to 115200 Fix #9092	2018-02-11 03:43:36 -06:00
Scott Lahteine	377108619b	Fix plan_arc clockwise (G2) Fix #9482	2018-02-11 03:34:25 -06:00
Scott Lahteine	378867d894	Update PB Rev.F pins	2018-02-11 01:45:37 -06:00
Scott Lahteine	8e0c107545	Have Kossel Pro use Z_MIN_PROBE_ENDSTOP (#9586 )	2018-02-11 01:41:40 -06:00
Scott Lahteine	03d790451f	[2.0.x] HAL timer set/get count => set/get compare (#9581 ) To reduce confusion over the current timer count vs. the compare (aka "top") value. Caution: this re-uses the function name, changing its meaning.	2018-02-10 20:42:00 -06:00
Scott Lahteine	7a4029d1b1	Correct MOTHERBOARD for Geeetech i3 Pro X	2018-02-10 20:29:29 -06:00
Scott Lahteine	451fb16f9b	Fix CYCLES_PER_MICROSECOND conflict	2018-02-10 20:08:48 -06:00
Scott Lahteine	3e384b60ce	Malyan M200 fix E0_AUTO_FAN_PIN (#9580 ) Fixes #8794	2018-02-10 20:04:09 -06:00
Scott Lahteine	33752de12d	Update some outdated configs	2018-02-10 19:48:16 -06:00
Scott Lahteine	38c7d53bf7	Repair some spacing	2018-02-10 19:33:26 -06:00
Scott Lahteine	e3043d7ac7	Fix #8744	2018-02-10 16:54:42 -06:00
Scott Lahteine	d3ddd5ffaa	Merge pull request #9576 from thinkyhead/bf2_more_tests [2.0.x] Fix Power class	2018-02-10 16:43:55 -06:00
Scott Lahteine	7280fa1e31	Patch Power class	2018-02-10 15:41:18 -06:00
Scott Lahteine	4aff6c1c32	Tronxy X5S pins and configuration	2018-02-10 15:07:04 -06:00
Scott Lahteine	05aa75cecf	Melzi boards use melzi pins	2018-02-10 14:44:14 -06:00
gege2b	5785bbb491	Updated french translation (#9556 )	2018-02-10 14:15:41 -06:00
GMagician	299606e4ae	[2.0.x] Memory overflow protection (#9562 )	2018-02-10 14:14:34 -06:00
teemuatlut	5990266724	Init CS pins before loading settings (#9566 )	2018-02-10 14:08:53 -06:00
teemuatlut	d3fdb44ad8	Update TMC section with SW SPI pins (#9554 )	2018-02-09 22:54:34 -06:00
Scott Lahteine	3168f0e646	Merge pull request #9549 from thinkyhead/bf2_prevent_comments_resetting [2.0.x] Prevent watchdog reset due to many comments	2018-02-09 07:13:26 -06:00
Scott Lahteine	9be6aa3f79	Merge pull request #9544 from thinkyhead/bf2_reliable_probe_heaters_off [2.0.x] More reliable PROBING_HEATERS_OFF with BED_LIMIT_SWITCHING	2018-02-09 07:12:29 -06:00
Scott Lahteine	c0dd9ef9f2	Support for AnyCubic TriGorilla board (#9551 )	2018-02-09 05:41:52 -06:00
Scott Lahteine	da693a636e	Fix handling of escapes in serial input	2018-02-09 05:19:33 -06:00
Scott Lahteine	cc9cef7f7a	Fix HAS_CONTROLLER_FAN in is_power_needed	2018-02-09 05:19:33 -06:00
Scott Lahteine	112917cfef	No EXTRUDER_RUNOUT_PREVENT during print	2018-02-09 05:19:33 -06:00
Scott Lahteine	c30a8067ab	Prevent watchdog reset due to many comments Addressing #7449	2018-02-09 05:19:33 -06:00
Scott Lahteine	b7053156fe	Minor comment/condition cleanup	2018-02-09 01:53:35 -06:00
Scott Lahteine	f64d300cfd	Sanity check SERIAL_PORT Addressing #7400	2018-02-09 00:44:15 -06:00
Scott Lahteine	5a70887467	Size lcd_status_message based on language (#9545 )	2018-02-08 23:03:47 -06:00
Scott Lahteine	545cd8fa60	Tweak malyanlcd.cpp	2018-02-08 22:00:23 -06:00
Scott Lahteine	e698998343	More reliable PROBING_HEATERS_OFF with BED_LIMIT_SWITCHING	2018-02-08 21:10:11 -06:00
shaktee	27faeafc1b	[2.0.x] BIBO Cyclops (#9541 )	2018-02-08 21:01:31 -06:00
Scott Lahteine	2014d38e10	NEOPIXEL_BRIGHTNESS parity	2018-02-08 18:55:19 -06:00
Scott Lahteine	694d2ebec0	TMC SW SPI pins in Configuration_adv.h Counterpart to #9632	2018-02-08 18:49:38 -06:00
GMagician	9854262334	[2.0.x] Fix compile warning (#9539 )	2018-02-08 17:59:03 -06:00
Scott Lahteine	b639f1ad4b	Correct some retract() comments	2018-02-08 17:57:48 -06:00
Thomas Moore	1541224a81	Enable Z axis and delta sensorless homing (#9516 )	2018-02-08 04:20:44 -06:00
Scott Lahteine	b2f8b4ada5	I2C position encoders update (#9533 ) Updating I2C position encoders to enable babystepping and Babystep XY when using the ecm microstep correction method. Also changed default method to ECM microstep.	2018-02-08 03:57:11 -06:00
Thomas Moore	93af0365e8	[2.0.x] Add support for Cohesion3D ReMix and Mini (#9512 ) * Add support for Cohesion3D ReMix and Mini * Two separate pins files for pedantic reasons	2018-02-08 03:14:39 -06:00
Scott Lahteine	23240f7986	Fix sw serial pins for TMC2208 From #9518 by @melvinisken	2018-02-08 02:54:49 -06:00
Scott Lahteine	d42a87cb31	Update language Italian From #9508 by @tnw513	2018-02-08 02:10:15 -06:00
Scott Lahteine	2538f019d0	Update language Basque-Euskera From #9514 by @1138-4EB	2018-02-08 02:08:41 -06:00
Scott Lahteine	d168ee9bed	Drop leveling include from steppers.cpp	2018-02-08 01:32:19 -06:00
Scott Lahteine	09c8807a36	Minor formatting in queue.cpp	2018-02-08 01:31:19 -06:00
Scott Lahteine	704d33c374	Special override of LCD_WIDTH	2018-02-08 01:30:56 -06:00
Scott Lahteine	b3f115fa0a	Marlin.ino needs no content (#9506 )	2018-02-06 02:28:18 -06:00
Scott Lahteine	ca8fdff1af	Comment G26 properly	2018-02-06 00:58:28 -06:00
Scott Lahteine	8558264514	Configs for Prusa i3 Pro B GT2560 Rev.A Plus (#9505 ) One without probe and one with BLTOUCH.	2018-02-06 00:24:21 -06:00
Scott Lahteine	b5e92f4f90	[2.0.x] Enable / disable PSU automatically (#9503 )	2018-02-06 00:22:30 -06:00
Scott Lahteine	eecb0188c0	Add ULTI_CONTROLLER to example configs	2018-02-05 22:30:03 -06:00
Scott Lahteine	16739264d3	Add UltiController v2.1 support Add compatibility with the original screen bord from Ultimaker 2 printer (UltiController v2.1 with the PG-2864ALBP I2C display)	2018-02-05 22:30:03 -06:00
Scott Lahteine	a8c4174a13	M100 comment	2018-02-05 21:54:50 -06:00
Scott Lahteine	38d62494ef	Adjustment to DOG_CHAR_*_EDIT	2018-02-05 20:25:45 -06:00
Scott Lahteine	8a6feab1c4	Num-to-string functions for DEBUG_LEVELING_FEATURE	2018-02-05 19:08:27 -06:00
Scott Lahteine	766faa05a9	sp	2018-02-05 15:57:29 -06:00
GMagician	f27c89980a	[2.0.x] Simplify bltouch configuration (#9488 )	2018-02-05 14:38:09 -06:00
GMagician	338dac258b	[2.0.x] Fix compiler error when G26 is enabled (#9492 )	2018-02-05 14:27:39 -06:00
Scott Lahteine	4ddb6a3a1f	Merge pull request #9470 from thinkyhead/bf2_malyan_clueless [2.0.x] Malyan M200 LCD	2018-02-05 05:03:18 -06:00
Scott Lahteine	03bfc0d7c8	Merge pull request #9439 from thinkyhead/bf2_fix_G26_circle_bumps [2.0.x] Change G26 circle angles	2018-02-04 19:05:18 -06:00
Scott Lahteine	e5ee0b6f6c	Implement MALYAN_LCD	2018-02-04 18:52:44 -06:00
Scott Lahteine	b939a2e88c	Watchdog conditional for LPC	2018-02-04 18:52:44 -06:00
Scott Lahteine	4925f60cff	Add MALYAN_LCD to configs	2018-02-04 18:52:44 -06:00
Scott Lahteine	3a1225e438	Sanity check SENSORLESS_HOMING	2018-02-04 18:52:44 -06:00
Scott Lahteine	2ea4e74ed3	Misc. comments	2018-02-04 17:40:39 -06:00
Scott Lahteine	aecf0c9bb9	Allow override of CS pins generally	2018-02-04 16:36:30 -06:00
Scott Lahteine	0891b58c30	#ifdef tweaks	2018-02-04 16:36:30 -06:00
Bob-the-Kuhn	428f164d02	[2.0.x] Bug fix - "M114 D" and Due (dtostrf C linkage) (#9481 )	2018-02-04 16:11:27 -06:00
Scott Lahteine	693843f1fa	Allow override of RAMPS CS Pins (#9472 )	2018-02-04 16:00:16 -06:00
ABH10	ac6bf7226a	Update of comments in thermistor files. No functional changes. (#8986 )	2018-02-04 06:06:21 -06:00
Alexey Shvetsov	da3a0d619c	Add Selena Compact board (#9407 ) 5-axis, high performance, powerful board with Smoothieware opensource firmware. Designed for 3D printer, Laser cutter or CNC mill. Five changed independent drivers on board. Two extruders 3d printer support.	2018-02-04 03:15:09 -06:00
Thomas Moore	786746404b	[2.0.x] Apply feedrate to nozzle movement for kinematic machines (#8778 )	2018-02-04 00:26:05 -06:00
Scott Lahteine	5364b92c37	Drop obsolete string	2018-02-03 23:58:31 -06:00
shaktee	34624cf399	[2.0.x] BIBO TouchX configuration (#9469 )	2018-02-03 23:21:02 -06:00
Bob-the-Kuhn	3d72fe0730	snapshot	2018-02-03 21:28:05 -06:00
Scott Lahteine	33ec599ca0	Tweaky LPC1768 SPI spacing/style	2018-02-03 20:25:57 -06:00
Scott Lahteine	c46de340b7	Clean up trailing whitespace	2018-02-03 20:05:23 -06:00
Thomas Moore	e1fd9c08b3	[2.0.x] Add support for LPC1769 at 120 MHz (#9423 )	2018-02-03 19:33:26 -06:00
GMagician	6ace57e1b0	[2.0.x] remove duplicated include (#9445 ) This was present in #9357 but lost	2018-02-03 19:32:05 -06:00
GMagician	9e13d1fad5	[2.0.x] Fix temperature out of LCD (#9461 ) Fix bug introduced in #9415	2018-02-03 19:25:04 -06:00
Scott Lahteine	e6cdc438fd	Change G26 circle angles To prevent the nozzle from colliding with the printed pattern.	2018-02-03 19:17:49 -06:00
Scott Lahteine	a8764ac5d5	G26 parity with 1.1.x	2018-02-02 05:19:14 -06:00
Manuel Valentino	374f2a5e16	[2.0.x] Fixed wrong information about TMC2208 wiring (#9335 )	2018-02-02 04:45:55 -06:00
Bob-the-Kuhn	a0570ff1eb	Fix caselight on Due (#9364 )	2018-02-02 04:13:33 -06:00
Scott Lahteine	b13099de3f	General cleanup of HAL code	2018-02-02 03:37:15 -06:00
Scott Lahteine	9b9350e010	Fix jerky Z motion between probes Suggested by #9375	2018-02-02 02:32:11 -06:00
Scott Lahteine	d6e29e9597	Update French language Based on #9373 by @nikkoura	2018-02-02 01:56:25 -06:00
GMagician	e1117a8492	[2.0.x] fix compile errors when CNC_COORDINATE_SYSTEMS is enabled (#9380 )	2018-02-02 01:45:46 -06:00
GMagician	ea9ad4e46d	[2.0.x] Fix compile error on delta when NO_WORKSPACE_OFFSETS (#9388 )	2018-02-02 01:44:48 -06:00
Scott Lahteine	79796b22ad	Fix up _Bootscreen.h and _Statusscreen.h	2018-02-02 00:57:16 -06:00
Bob-the-Kuhn	21179f8300	Fix the "slow" version of the G-code parser	2018-02-02 00:35:58 -06:00
Scott Lahteine	c251601916	Simplified SET_BIT, moved to endstops.cpp	2018-02-02 00:34:23 -06:00
Scott Lahteine	eb18ae9003	Define LSBFIRST / MSBFIRST for LPC	2018-02-02 00:34:23 -06:00
Scott Lahteine	f8227abf1c	Merge pull request #9384 from tcm0116/2.0.x-retract [2.0.x] Clear retracted status when homing the Z axis	2018-02-01 23:36:36 -06:00
Scott Lahteine	ea5f91737f	Merge pull request #9392 from studiodyne/studiodyne-pause [2.0.x] Pause resuming fix	2018-02-01 23:32:24 -06:00
teemuatlut	5c69d45f5b	[2.0.x] TMC2130 support for LPC platform (#9114 )	2018-02-01 21:49:40 -06:00
Scott Lahteine	34160806c0	Fix broken G29 W I J	2018-02-01 21:37:35 -06:00
Scott Lahteine	f5cfdf6efe	Use _BV32 to avoid name conflict	2018-02-01 21:37:35 -06:00
Scott Lahteine	6339b506c0	Make sure binary.h is included as needed	2018-02-01 21:37:35 -06:00
studiodyne	51d080d2c1	Update Pause	2018-01-29 21:57:37 +01:00
Thomas Moore	7035471982	Clear retracted status when homing the Z axis	2018-01-29 19:40:04 +00:00
GMagician	6d4bc9a1f8	[2.0.x] Fix SD wrong filename list (#9342 ) If last file in directory has short filename and is preceded by a deleted long file name. SD menu will wrongly report long deleted file name as last entry	2018-01-26 14:03:51 -06:00
Bob-the-Kuhn	c6e01ebd52	never mind ...	2018-01-25 22:13:32 -06:00
Bob-the-Kuhn	ab709ccac1	add USEABLE_HARDWARE_PWM & clear up some compiler warnings	2018-01-24 21:42:36 -06:00
Scott Lahteine	fc5c1a28d8	Fix M118 parameter parsing	2018-01-24 00:30:13 -06:00
Scott Lahteine	399bca316a	Fix has_value with FASTER_GCODE_PARSER	2018-01-24 00:30:13 -06:00
Scott Lahteine	80d3ded895	Change parser codebits from array to int32_t	2018-01-24 00:30:13 -06:00
Scott Lahteine	053b1371c7	Simplify G-code debug option	2018-01-24 00:06:07 -06:00
Scott Lahteine	608f8b10da	Parser val method parity with 1.1.x	2018-01-24 00:06:07 -06:00
Scott Lahteine	2bea1bda56	Move more strings to PROGMEM	2018-01-24 00:06:06 -06:00
Scott Lahteine	58671e1bc1	Marlin must override _BV for 32-bit masks!	2018-01-23 23:52:35 -06:00
Scott Lahteine	45cfb16424	Merge pull request #8355 from tcm0116/2.0.x-TwoWire [2.0.x] Master-only TwoWire (I2C) class for LPC1768	2018-01-23 20:14:02 -06:00
Scott Lahteine	1dcfe193ac	Optimize some serial strings	2018-01-23 19:14:00 -06:00
Scott Lahteine	9644fe1839	Lightly optimize arc length calculation	2018-01-23 19:13:59 -06:00
Scott Lahteine	c9bda932fe	Patch M114 D logical output	2018-01-23 18:50:37 -06:00
Scott Lahteine	e5ca60acf5	Patch G29 no_action for A and Q	2018-01-23 14:00:06 -06:00
Scott Lahteine	696f8eb4c6	Include Z Fade in log_machine_info	2018-01-23 14:00:06 -06:00
Scott Lahteine	3217da6fa5	Followup patch for TMC stepper init	2018-01-23 14:00:06 -06:00
Scott Lahteine	db031d5d76	Add missing SoftwareSerial begin for TMC2208 Based on #9299	2018-01-22 10:43:24 -06:00
Thomas Moore	3db35ba9be	[2.0.x] Fix change filament for delta machines (#9295 )	2018-01-22 10:21:42 -06:00
Scott Lahteine	2ebf52e57d	Fix Skew Correction pre-calculation overflow error	2018-01-22 08:20:21 -06:00
Scott Lahteine	adb2ac4747	Fix skew settings report precision	2018-01-22 08:09:36 -06:00
Scott Lahteine	205c5fa078	Merge pull request #9277 from oysteinkrog/fix/DualX_Endstops [2.0.x] Fix DUAL_X_CARRIAGE endstop tests	2018-01-22 07:42:49 -06:00
Scott Lahteine	90d011cc48	Use ADD_PORT_ARG for all cases	2018-01-22 06:27:22 -06:00
Scott Lahteine	51c7b5d46f	Fix set_home_offset bug from bad porting	2018-01-22 06:16:21 -06:00
Scott Lahteine	b1cd012aa6	Clean up and document load/unload/pause/resume	2018-01-22 05:45:46 -06:00
Scott Lahteine	266086670b	Better LCD message when heating needed	2018-01-22 04:38:37 -06:00
Scott Lahteine	a718f5bdf3	Don't run `M600` on filament runout if the nozzle is cold	2018-01-22 04:38:37 -06:00
Scott Lahteine	61bf8478a2	Add hotEnough methods	2018-01-22 04:38:37 -06:00
Scott Lahteine	7a52dfad55	Merge pull request #9283 from thinkyhead/bf2_jgaurora_configs [2.0.x] Add JGAurora A5 support	2018-01-22 02:21:56 -06:00
Chris Pepper	f875f49caa	[2.0.x] LPC1768: Fix: Serial pins disabled correctly when in use (#9193 )	2018-01-22 01:54:41 -06:00
Scott Lahteine	c63cffca7f	Add example configs for JGAurora A5	2018-01-22 01:27:11 -06:00
Scott Lahteine	7d6c009104	Add thermistor 15 tuned for JGAurora A5	2018-01-22 01:27:11 -06:00
Scott Lahteine	582d073de1	Patch up digital microstepping and SPI CS pins	2018-01-22 01:27:11 -06:00
Scott Lahteine	ab8a1a2a0d	Sync gCreate gMax1.5+ config with 1.1.x	2018-01-22 01:05:12 -06:00
Scott Lahteine	f9dbd4d9f4	Updated FolgerTech i3-2020 config	2018-01-22 01:05:12 -06:00
Scott Lahteine	348b454401	Probe bounds based on bed size	2018-01-22 01:05:11 -06:00
Bob-the-Kuhn	a440522f84	Merge pull request #9284 from Bob-the-Kuhn/DUE-pins-debug [2.0.x] PINS_DEBUGGING maintenance	2018-01-21 18:40:39 -06:00
Scott Lahteine	58ed9901d7	Consistent NEOPIXEL_TYPE options	2018-01-21 17:19:38 -06:00
Scott Lahteine	382a5e3318	Clean up trailing whitespace	2018-01-21 17:19:38 -06:00
Øystein Krog	441517bbe1	Fix DUAL_X_CARRIAGE endstops \#8170 fixed	2018-01-21 15:32:19 +01:00
Scott Lahteine	b46932f0c0	Merge pull request #9273 from thinkyhead/bf2_creality_tuneup [2.0.x] Fix and improve Creality configs	2018-01-21 02:53:16 -06:00
Scott Lahteine	49bcb5ce2d	Merge pull request #9220 from benlye/lcd-timer [2.0.x] Fix LCD timer string length	2018-01-21 02:47:59 -06:00
Scott Lahteine	07db5638e2	Add a heating indicator X offset	2018-01-21 02:04:14 -06:00
Scott Lahteine	c68ce8667d	Fix and improve Creality configs	2018-01-21 02:04:14 -06:00
Scott Lahteine	8190fdb260	[2.0.x] Option to use Neopixel as case light (#9270 ) * Add option to use Neopixel as case light * Apply CASE_LIGHT_USE_NEOPIXEL to example configs	2018-01-20 16:58:41 -06:00
GMagician	9b519864bf	[2.0.x] Relative movements fix (#9259 )	2018-01-20 15:22:03 -06:00
Scott Lahteine	887664aa61	Restore broken Dual X Carriage	2018-01-20 15:08:50 -06:00
Scott Lahteine	fb044b6a64	Fix HAL_timer_set_current_count for STM32F1	2018-01-20 14:57:17 -06:00
Scott Lahteine	a8638aa20d	Update STM32F1 timer code to use libmaple bb_perip	2018-01-20 14:56:57 -06:00
Scott Lahteine	2e2fd8fd79	Merge pull request #9261 from tcm0116/2.0.x-delta_softstops [2.0.x] Allow DELTA to compile with soft endstops disabled	2018-01-20 14:16:30 -06:00
Scott Lahteine	750cc02b3a	Use delay() in serial temp report	2018-01-20 14:13:17 -06:00
Scott Lahteine	9de8c04945	Allow FIL_RUNOUT_PIN override on RAMPS-based boards	2018-01-20 12:00:59 -06:00
Scott Lahteine	57b61491d3	Set FIL_RUNOUT_PIN for Creality CR10-S Tested with M43 and found to be connected to DIO 2	2018-01-20 11:56:57 -06:00
Scott Lahteine	4a4d832344	Use standard encoder pulses/steps for CR-10S	2018-01-20 11:35:52 -06:00
Thomas Moore	44239b1062	Allow DELTA to compile with soft endstops disabled	2018-01-20 09:40:36 -06:00
Scott Lahteine	4bc4351250	Date refresh	2018-01-20 09:17:57 -06:00
Scott Lahteine	303d792b9f	Merge pull request #9253 from tcm0116/2.0.x-mks_sbase [2.0.x] Cleanup MKS-SBASE compile warnings	2018-01-19 22:37:38 -06:00
Scott Lahteine	afec16e644	Merge pull request #9240 from tcm0116/2.0.x-eeprom [2.0.x] Follow-on to #9161	2018-01-19 22:36:24 -06:00
Scott Lahteine	f2ea8a0529	Merge pull request #9197 from p3p/pr_bf2_operation_freemem [2.0.x] LPC1768: Free up some RAM	2018-01-19 22:35:45 -06:00
Scott Lahteine	0c176c677e	Merge pull request #9231 from GMagician/2.0.x-ramps-pins-fixup [2.0.x] Expand RAMP case light possibilities	2018-01-19 22:29:32 -06:00
Scott Lahteine	f2d09f27bb	Merge pull request #9246 from GMagician/2.0.x-bed-temp-limit-fix [2.0.x] Standardized max temp values	2018-01-19 22:27:19 -06:00
Bob-the-Kuhn	16eb966ee3	PINS_DEBUGGING cleanup for DUE	2018-01-19 21:12:24 -06:00
Thomas Moore	63fd23ab1c	Cleanup MKS-SBASE compile warnings	2018-01-19 15:46:34 -06:00
Bob-the-Kuhn	11e68541b0	Merge pull request #9245 from Bob-the-Kuhn/TMC2208-sanity-check-2.0.x [2.0.x] add TMC2208 sanity check to AVR	2018-01-19 15:42:53 -06:00
Thomas Moore	429e6ba8a6	Fix lcd_preheat dummy variable types	2018-01-19 15:24:13 -06:00
GMagician	719cd53e09	Standardized max temp values Everywhere in menu items temperatures are "defined value" subtracted by 15. In one place is subtracted by 5	2018-01-19 19:32:46 +01:00
Bob-the-Kuhn	0ea9cdf4f2	TMC2208 sanity check	2018-01-19 12:19:34 -06:00
Roxy-3D	7c469c0712	Suggested change to fix Due compile problem	2018-01-18 23:00:03 -06:00
Roxy-3D	bfd9728cf4	Serial buffer over run work around for v2.0.0 (#9236 ) * Work around for serial buffer over run PronterFace sends a lot of M105 commands. During long operations such as UBL's G29 P1, G29 P2, G29 P4 and G26 this can over run the serial buffer. This results (very often) in a M1 (actually a M1M105) ending up in the command queue. Until we figure out a better way to resolve this issue, this will keep the UBL commands from experiencing bogus commands at thier completion.	2018-01-18 19:57:18 -06:00
GMagician	c371bdc499	Expand RAMP case light possibilities Pin 6 is only used by servos when 2 or more of them are used	2018-01-18 18:31:08 +01:00
blye	7c18c2ea5f	Fix LCD timer string length	2018-01-17 21:10:45 +00:00
Roxy-3D	9d0cf02fef	Correct mesh size calculations	2018-01-17 09:36:12 -06:00
Scott Lahteine	c7bad74d8f	Merge pull request #9202 from benlye/m73-bugfix [2.0.x] Fix progress bar duration when time is exactly 86400s	2018-01-16 21:14:58 -06:00
Roxy-3D	af9b32e3b9	Give PronterFace time to print the UBL What information... Give PronterFace time to print the UBL What information...	2018-01-16 18:00:57 -06:00
Roxy-3D	acb1e31374	Fix UBL Mesh Size regression	2018-01-16 17:58:15 -06:00
Roxy-3D	f5f1b069ad	Convert UBL mesh tilting to all use the same algorithm (#9204 ) A number of regressions were patched also. The UBL G29 P2 and P4 Press and Hold had stopped working. It is very possible this is broken in the bugfix_v1.1.x branch also. The main purpose of the Pull Request is to get the 3-Point mesh tilting to use the LSF algorithm just like the grid based mesh tilt. This simplifies the logic and reduces the code size some what. But the real reason to do it is the 3-Point case can be solved exactly. And by feeding these numbers into the LSF algorithm it provides a way to check all that code for 'correctness'.	2018-01-16 11:08:00 -06:00
blye	554d849827	Fix duration when time is exactly 86400s	2018-01-16 08:12:00 +00:00
Christopher Pepper	6f1bf5d212	LPC1768: Config: default to SDSORT_LIMIT = 64 instead of 256	2018-01-15 22:02:21 +00:00
Christopher Pepper	1e65562d55	LPC1768: HAL: only initialise used HardwareSerial ports Misc formatting	2018-01-15 22:00:59 +00:00
Roxy-3D	9dacd54a50	Get FT-i3-2020 configuration files into compliance with ?_BED_SIZE	2018-01-15 15:33:51 -06:00
Scott Lahteine	d178d6e921	M503 patch for EEPROM_CHITCHAT off Fix #9155	2018-01-15 06:09:25 -06:00
Scott Lahteine	fa432508b0	Followup to Ender config	2018-01-15 06:00:21 -06:00
Thomas Moore	6856eccc77	Master-only TwoWire class for LPC1768	2018-01-15 05:22:03 -06:00
Scott Lahteine	d5bf9e74c4	Merge pull request #8996 from p3p/pr_bf2_more_adc_filter [2.0.x] PID control fix and more LPC1768 ADC filtering	2018-01-15 05:14:25 -06:00
Scott Lahteine	4d2f277d43	Merge pull request #9189 from psavva/tmc_debug_compile_fix [2.0.x] Fixes TMC_DEBUG compilation error	2018-01-15 04:52:21 -06:00
Scott Lahteine	43d3d024ac	Update tmc_util.cpp	2018-01-15 04:51:59 -06:00
Panayiotis Savva	ad500b01e0	Fixes TMC compilation error	2018-01-15 12:43:22 +02:00
Scott Lahteine	f4e4c7a7c8	Merge pull request #9188 from thinkyhead/bf2_creality_ender [2.0.x] Add Creality Ender config/board	2018-01-15 04:33:09 -06:00
Scott Lahteine	2038722c52	LARGE_FLASH obsolete	2018-01-15 03:42:24 -06:00
Scott Lahteine	f887719a40	Creality Ender board support	2018-01-15 03:42:24 -06:00
Scott Lahteine	9a2dd0bc5a	Creality Ender 2/4 configuration	2018-01-15 03:42:23 -06:00
Scott Lahteine	2c18faf3e4	General cleanups for HAL	2018-01-15 02:46:37 -06:00
Scott Lahteine	42933c804a	Cleanups for STM32F7	2018-01-15 02:46:37 -06:00
Morten	a0246c5c96	Add support for STM32F7 MCU	2018-01-15 01:13:03 -06:00
Scott Lahteine	a27fa80a7e	More featureful CR-10S configuration	2018-01-15 01:06:06 -06:00
Scott Lahteine	1a3d2ad275	Merge pull request #9168 from marvin-sinister/rename-M100-2.0.x [2.0.x] Rename M200 pins file to uppercase	2018-01-15 00:49:06 -06:00
Scott Lahteine	a408209d24	More reliable temperature serial report?	2018-01-15 00:43:51 -06:00
Scott Lahteine	5f807e37c5	A second rename saves nine	2018-01-14 23:44:19 -06:00
Scott Lahteine	3ae41e5f7f	Merge pull request #9152 from thinkyhead/bf2_anti_stutter [2.0.x] Ensure smooth printer movements	2018-01-14 23:34:01 -06:00
Scott Lahteine	02ff12d491	More up front option to show SD percentage	2018-01-14 23:32:39 -06:00
Scott Lahteine	3b15c88225	Merge pull request #9153 from thinkyhead/bf2_malyan_support [2.0.x] Fix support for Malyan M150	2018-01-14 22:54:00 -06:00
Scott Lahteine	e753d6298f	FLSUN Kossel example configs	2018-01-14 22:52:35 -06:00
Scott Lahteine	77c2d810f9	Bring configs up to date	2018-01-14 22:52:06 -06:00
Scott Lahteine	3952070800	Link to marlinfw.org boot screen tool	2018-01-14 22:41:05 -06:00
Scott Lahteine	0cd397a3f8	Add instructions for Malyan M150	2018-01-14 21:15:03 -06:00
Scott Lahteine	344ebc3bd2	Create and use pins_MELZI_MALYAN.h for Malyan M150	2018-01-14 21:14:58 -06:00
Scott Lahteine	094e9b1dab	Remove ARDUINO_ARCH_SAM from serial.h too?	2018-01-14 21:07:10 -06:00
Scott Lahteine	c37d38886c	Fix serial.h avr block Followup to #8148	2018-01-14 21:07:10 -06:00
Scott Lahteine	4f5e087ff4	Planner anti-stutter by Sebastian Popp	2018-01-14 21:07:10 -06:00
Scott Lahteine	ac368f2788	Add STEPPER_ISR_ENABLED() to HALs Some also get a `HAL_timer_interrupt_enabled` function.	2018-01-14 21:07:10 -06:00
Scott Lahteine	5578dccaa0	Merge pull request #9161 from tcm0116/2.0.x-eeprom [2.0.x] Fix EEPROM SettingsData for 32-bit architectures	2018-01-14 20:50:37 -06:00
Scott Lahteine	6ba8cf8405	Merge pull request #9163 from GMagician/2.0.x-SD-issues-fix [2.0.x] sd issue fix	2018-01-14 20:48:52 -06:00
Marvin Sinister	50c55b25f7	Renamed to upercase	2018-01-13 15:02:07 +01:00
GMagician	6667a916a4	Indentation fix	2018-01-13 09:48:26 +01:00
GMagician	be717b3c07	Save some program memory This will save some program memory with no speed lose	2018-01-13 08:56:51 +01:00
GMagician	f37c64ee5b	Fix unsupported CMD59 It seems that some SD cards don't support CRC_ON_OFF command. This fix will permit to use also these cards but leaving CRC check active on the system	2018-01-13 08:53:12 +01:00
Thomas Moore	cfd989d7c5	Fix EEPROM SettingsData for 32-bit architectures	2018-01-12 19:38:23 -06:00
Bob-the-Kuhn	da600e5fbe	Merge pull request #9132 from Bob-the-Kuhn/add-VIKI2-to-Travis [2.0.x] add VIKI2 test to Travis & fix LCD contrast (again)	2018-01-12 00:42:04 -06:00
Scott Lahteine	742cff5f3c	Followup to #9141	2018-01-11 22:15:01 -06:00
Thomas Moore	84de428d30	[2.0.x] Fix compile errors (#9141 ) * Update persistent_store_impl.cpp * Remove define BYTE from serial functions since Arduino docs typically show 0 for the normal case.	2018-01-11 21:43:26 -06:00
Bob-the-Kuhn	e633ce06c7	LCD contrast type mismatch is back WORKS!	2018-01-11 10:32:58 -06:00
Scott Lahteine	e654ea1e1a	Merge pull request #9130 from thinkyhead/bf2_tmc_followup [2.0.x] More TMC followup	2018-01-11 03:40:45 -06:00
Scott Lahteine	8ac246162e	Creality CR-10S configurations Provided by printedsolid.com	2018-01-11 01:10:17 -06:00
Scott Lahteine	048486390e	Bring some configs up to date	2018-01-11 01:10:17 -06:00
Scott Lahteine	6a043eee55	Various updates for TMC support	2018-01-10 23:04:48 -06:00
Scott Lahteine	d7fd78cb91	Merge pull request #8148 from tcm0116/2.0.x-multi_host [2.0.x] Add multi-host support	2018-01-10 02:38:59 -06:00
teemuatlut	a8c446c3bc	[2.0.x]DUE: Fix includes for SDSUPPORT (#9112 )	2018-01-10 00:46:34 -06:00
Thomas Moore	f7efac57b7	Multi-host support	2018-01-10 00:14:47 -06:00
Thomas Moore	dabb75034c	Update example configurations	2018-01-10 00:01:20 -06:00
Bob-the-Kuhn	6a50adb4d5	works	2018-01-09 22:15:33 -06:00
Scott Lahteine	5c076a6d93	Improved M915 description	2018-01-09 18:56:27 -06:00
Scott Lahteine	a94104dbb5	Merge pull request #9113 from teemuatlut/TMC_followup [2.0.x]TMC followup	2018-01-09 18:46:35 -06:00
Dave Johnson	554e577676	SERIAL_STATS_* features not supported on USBCON targets (#9127 )	2018-01-09 18:42:55 -06:00
Dave Johnson	2db666e99a	Enable USE_ZMIN_PLUG on SCARA example (#9126 )	2018-01-09 18:41:28 -06:00
Scott Lahteine	7e000e6af4	More EEPROM field debugging (#9123 )	2018-01-09 18:33:44 -06:00
GMagician	3a99dc7c5c	2.0.x Fix compiler warning (#9116 ) Fix duplicate language define warning	2018-01-09 16:54:41 -06:00
GMagician	5295b4713d	[2.0.x] add semitec 104NT-4 (#9119 ) Table is very very similar to old 104-GT2 so I added only the name and recycled old ID	2018-01-09 16:53:12 -06:00
teemuatlut	cdc61ebf53	Add M915 configuration option	2018-01-09 18:28:48 +02:00
teemuatlut	9d923c6c03	Fix TMC gcode commands	2018-01-08 18:45:05 +02:00
Scott Lahteine	99516572b1	Fix TMC current read from EEPROM	2018-01-07 20:48:46 -06:00
Tannoo	f26805e862	[2.0.x] UBL Mesh Storage Message (#9095 )	2018-01-07 20:33:53 -06:00
Christopher Pepper	14dcad6bbc	LPC1768: Increase ADC median filter from 3 values to 23 Clarify the HAL_adc_get_result method to make sure correct values enter the filters HAL: Fix the PID control loop for non-AVR platforms	2018-01-07 22:15:20 +00:00
Scott Lahteine	60d07f20e7	Make mbl.has_mesh() a method	2018-01-07 00:13:36 -06:00
Scott Lahteine	86818c9a89	Move MBL functions into the class	2018-01-07 00:13:36 -06:00
Unknown	bbb8d4c802	Set has_mesh if user issues G9 S3 Prevents user from having to manually run through entire manual leveling process only to enable mesh so they can manually restore their offline mesh backup	2018-01-06 21:07:07 -08:00
Scott Lahteine	2b5a9be49c	Fix M503 skew output Followup to `19e75ccf86`	2018-01-06 20:55:57 -06:00
Scott Lahteine	cf2922f164	Laser/spindle PWM off on M5	2018-01-06 15:29:22 -06:00
GMagician	5fb6dd1424	Bmp fix Clockwise arrow fixed	2018-01-06 19:02:36 +01:00
Bob-the-Kuhn	cb0e826c5d	Merge pull request #9068 from Bob-the-Kuhn/SD-detect [2.0.x] SD card detect improvement	2018-01-05 21:09:57 -06:00
Bob-the-Kuhn	f72b0a7b04	1234	2018-01-05 20:36:05 -06:00
Scott Lahteine	702c8acdd5	Settings FIELD_TEST fix	2018-01-05 19:13:30 -06:00
Scott Lahteine	e89f1453ab	UBL G29 works without settings.load()	2018-01-05 15:48:34 -06:00
Scott Lahteine	950be70a33	Add FIELD_TEST to validate storage	2018-01-05 15:48:34 -06:00
Scott Lahteine	760c912ab9	Add data size validation	2018-01-05 15:48:34 -06:00
Scott Lahteine	b91ca168fb	Add a struct defining EEPROM storage	2018-01-05 15:48:34 -06:00
Scott Lahteine	51e0f2bee3	Add MarlinSettings::validate()	2018-01-05 14:35:24 -06:00
Scott Lahteine	878f54c27b	Write filler with NO_VOLUMETRICS	2018-01-05 10:29:49 -06:00
Scott Lahteine	3ea6745b36	Pretty up TMC current write	2018-01-05 10:29:49 -06:00
Scott Lahteine	3319765034	Detab some HAL files	2018-01-05 10:28:17 -06:00
Scott Lahteine	1c41de16d4	Trailing whitespace clean	2018-01-05 10:11:31 -06:00
Scott Lahteine	1746a7352e	Merge pull request #9042 from thinkyhead/bf2_M701_M702 [2.0.x] Improved Pause/Load/Unload, M701-M702	2018-01-04 19:41:58 -06:00
Scott Lahteine	048d8a0158	CheapTRONIC v2.0 additions/revisions Based on #9030	2018-01-04 18:00:25 -06:00
Roxy-3D	3a4e107b6b	use SERIAL_EOL(); instead of new line string	2018-01-04 16:20:18 -06:00
Roxy-3D	a5dfe08a81	Add precision to planner.xy_skew_factor so it doesn't print as 0.00	2018-01-04 16:14:09 -06:00
Roxy-3D	19e75ccf86	Add enough precision so planner.xy_skew_factor doesn't print as 0.00	2018-01-04 16:02:22 -06:00
Scott Lahteine	4fb60e1562	M702.cpp => M701_M702.cpp	2018-01-04 15:07:37 -06:00
Scott Lahteine	7541316bb4	Add M701/M702 Filament Load/Unload, M603	2018-01-04 15:07:37 -06:00
Scott Lahteine	81211da7b4	M701 / M702 language changes	2018-01-04 05:05:28 -06:00
Scott Lahteine	8704e533da	Apply FILAMENT_LOAD_UNLOAD_GCODES to example configs	2018-01-04 03:56:36 -06:00
Scott Lahteine	455592eee8	Improvements to LCD menu macros	2018-01-04 03:56:36 -06:00
Scott Lahteine	a80f2eea23	Group leveling reports for folding	2018-01-04 03:56:36 -06:00
Scott Lahteine	190cd0a111	Nozzle park args	2018-01-04 03:56:36 -06:00
revilor	0e93506985	Fix for issue #9005 , #8942 - Bed PID autotuning (#9036 )	2018-01-04 03:26:14 -06:00
Bob-the-Kuhn	016e46a3c0	Merge pull request #9009 from Bob-the-Kuhn/Due-RRDFG-power-up-garbage [2.0.x] Due - fix power up garbage on RRDFG LCD	2018-01-03 23:19:29 -06:00
studiodyne	31582caa07	2.0 Fix for bad Pause extruder position resuming (#9029 )	2018-01-03 23:18:27 -06:00
Bob-the-Kuhn	4626d04067	as good as i can get it minor edits to force new Travis test (last one timed out) Update u8g_com_HAL_DUE_st7920_sw_spi.cpp initial power up display garbage gone	2018-01-03 22:46:31 -06:00
Scott Lahteine	4af3d436b2	M303 pid autotune cleanup, commentary	2018-01-03 21:30:45 -06:00
Bob-the-Kuhn	e5b71af8c9	snapshot found a few more nasties	2018-01-03 10:41:23 -06:00
Scott Lahteine	724e3f33bc	Merge pull request #9001 from Tannoo/(2.0.x)_LCD_EEPROM_init_fix [2.0.x] EEPROM init fix	2018-01-03 05:47:01 -06:00
revilor	959a2d2527	Add beginTransaction to HAL SPI (#9019 )	2018-01-03 05:12:25 -06:00
Tannoo	e43f3ac989	EEPROM init fix	2018-01-03 04:31:01 -06:00
Scott Lahteine	fc67c64b8f	Merge pull request #8989 from tcm0116/2.0.x_ubl [2.0.x] Fix UBL compilation warnings	2018-01-02 21:38:45 -06:00
Thomas Moore	8afc4f8d9d	Fix UBL compilation warnings	2018-01-02 21:00:06 -06:00
Bob-the-Kuhn	eca5cc8669	Merge pull request #9003 from Bob-the-Kuhn/Due-PINS_DEBUG-&-related [2.0.x] add Due PINS_DEBUG support & misc improvements (replaces PR #8990)	2018-01-02 18:47:53 -06:00
Bob-the-Kuhn	e9fc7bc69c	Merge pull request #9000 from Bob-the-Kuhn/2.0-LCD-contrast [2.0.x] lcd_contrast type mismatch work around	2018-01-02 18:46:31 -06:00
Bob-the-Kuhn	5574fad69c	copy of PR #8991 code Formatting tweaks correct array initialization & remove test code	2018-01-02 11:17:46 -06:00
Scott Lahteine	d190c702de	Add MKS_BASE Microstepping pins Based on #9008	2018-01-01 18:49:21 -06:00
Scott Lahteine	5e01ee8adf	Temperature updates for parity with 1.1.x	2018-01-01 18:29:08 -06:00
Bob-the-Kuhn	adb9ecf3cc	copy of PR #8990	2018-01-01 16:11:56 -06:00
Roxy-3D	39e5fabfa9	Z BabyStepping should not be dependent on a bed leveling system being active	2018-01-01 14:46:50 -06:00
Bob-the-Kuhn	ef911a2d12	works	2018-01-01 14:35:16 -06:00
Scott Lahteine	d80c4f1a6e	Fix typo in delta call to buffer_line Fix #8901	2017-12-31 01:40:07 -06:00
Scott Lahteine	9312ee63b0	Merge pull request #8979 from thinkyhead/bf2_sync_up_configs [2.0.x] Synchronize configs with 1.1.x	2017-12-31 01:15:43 -06:00
Scott Lahteine	41dfb229ec	Merge pull request #8978 from thinkyhead/bf2_slimming_option [2.0.x] SLIM_LCD_MENUS option	2017-12-31 00:56:29 -06:00
Scott Lahteine	3dd04736c0	Update M17_M18_M84.cpp	2017-12-31 00:26:45 -06:00
Scott Lahteine	2929c9e56f	A specific option to SLIM_LCD_MENUS	2017-12-31 00:11:22 -06:00
Scott Lahteine	10edb469bb	Apply SLIM_LCD_MENUS to example configs	2017-12-31 00:11:21 -06:00
Scott Lahteine	5294fd132f	Merge pull request #8924 from ejtagle/bugfix-2.0.x [2.0.x] Improve SW SPI for DUE a bit more	2017-12-30 23:32:46 -06:00
Scott Lahteine	0b4a46fa6c	Bring configs up to date with 1.1.x	2017-12-30 23:28:53 -06:00
Scott Lahteine	7cc2193bce	Add Tronxy X1 example config (#8972 )	2017-12-30 17:25:31 -06:00
etagle	729a9f55fc	Improved Sw SPI on DUE HAL a bit more. Now the USB MSD can transfer at 750k/s. Previously, it was 500k/s. I think this is the maximum achievable speed using Sw SPI.	2017-12-30 17:24:38 -06:00
Scott Lahteine	615146c069	Enqueue commands better in ultralcd.cpp	2017-12-30 04:44:59 -06:00
Scott Lahteine	9686ffedef	Single pause flag also indicates SD print pause	2017-12-30 04:44:59 -06:00
Scott Lahteine	6d94bbf618	Apply some PGM_P pointers	2017-12-30 04:03:17 -06:00
Bob-the-Kuhn	cba44128d5	fix include	2017-12-29 10:08:30 -06:00
Scott Lahteine	427df8792d	Fix Capabilities Report	2017-12-28 21:08:59 -06:00
Scott Lahteine	2526ac6500	Display up to 3 extruders on char LCD …and show bed level indicator at the position of the [H] icon, when a heated bed exists.	2017-12-28 20:17:42 -06:00
Scott Lahteine	db32c185ae	Merge pull request #8860 from Bob-the-Kuhn/2.0.x-DUE-RRDFGSC [2.0.x] DUE - update for Reprap Discount Full Graphic Smart Controller	2017-12-27 05:06:49 -06:00
Scott Lahteine	9ecdd1f4c7	Multi extruder support for M600 and LCD	2017-12-27 04:33:25 -06:00
Scott Lahteine	a1ce6e8ff4	Clear lcd_clicked immediately on use	2017-12-26 22:26:04 -06:00
Scott Lahteine	5effe1590c	Fix NO_VOLUMETRICS bug	2017-12-26 20:04:44 -06:00
Scott Lahteine	f163eede78	No sub-menu if NO_VOLUMETRICS For parity with #8911	2017-12-26 18:28:42 -06:00
Scott Lahteine	2c4e03d2cf	Indentation of a SW SPI file	2017-12-25 09:34:43 -06:00
Scott Lahteine	1a827d5b68	Opening brace tweaks	2017-12-25 09:34:43 -06:00
Bob-the-Kuhn	a142fab155	Enable RRDFGSC on Due	2017-12-25 09:22:14 -06:00
Scott Lahteine	b259bb4670	Fix tmc_util global vars	2017-12-25 09:05:31 -06:00
Scott Lahteine	4ef965cc40	Fix compiler warnings	2017-12-25 08:53:01 -06:00
Scott Lahteine	9e8008c49c	Fixes for G29, esp. 3POINT	2017-12-25 08:37:27 -06:00
Scott Lahteine	026e301307	lcd_map_control deps on ULTIPANEL	2017-12-25 07:46:25 -06:00
Scott Lahteine	f2731c9f93	Allow consecutive uses of G29	2017-12-25 06:32:33 -06:00
Scott Lahteine	4b49ea1e92	General cleanup of config-store, reset_bed_level	2017-12-25 05:16:01 -06:00
Scott Lahteine	2925852244	Fix GT2560 A+ servo pin	2017-12-25 02:18:56 -06:00
Scott Lahteine	c6354fa153	Tweak M125 code	2017-12-25 01:39:55 -06:00
Scott Lahteine	3b51f5c67e	Add pause/resume action to example configs	2017-12-25 01:39:18 -06:00
Scott Lahteine	f704f405af	Add pause/resume actions on M600, M125	2017-12-25 01:39:18 -06:00
Thomas Moore	f0a8a1a853	[2.0.x] Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE (#8866 ) * Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE	2017-12-25 01:38:06 -06:00
Scott Lahteine	705ea98fd3	Comment `return false` in motion functions	2017-12-24 22:57:15 -06:00
Scott Lahteine	50366b00d5	Tweak cleaning buffer / SD finished command	2017-12-24 20:35:05 -06:00
Scott Lahteine	28fc8741d6	Reduce default jerk. XY by half. Z by 1/4	2017-12-24 19:54:11 -06:00
Bob-the-Kuhn	1a948cbd93	Fix SET_OUTPUT glitch - LPC1768 & DUE	2017-12-24 19:25:32 -06:00
Scott Lahteine	869c89d83f	Merge pull request #8865 from thinkyhead/bf2_more_scara_scaling [2.0.x] SCARA Feedrate Scaling for G2/G3 - using HYPOT	2017-12-24 19:18:13 -06:00
Scott Lahteine	1cf1cf8759	Add RADDS_DISPLAY to example configs	2017-12-24 19:00:23 -06:00
Even	ea1a8d1223	add original RADDS LCD + Controller adds setup for the original Radds Display+Controller+SD Card Reader PCB http://doku.radds.org/dokumentation/lcd-display/	2017-12-24 19:00:23 -06:00
Scott Lahteine	4a8fd8ae92	Merge pull request #8853 from ejtagle/bugfix-2.0.x USB Mass Storage Implementation / CDC with HW flow control and misc fixes and improvements for Arduino DUE/RE-ARM based boards	2017-12-24 18:50:28 -06:00
Scott Lahteine	aa97cd6e9b	Merge pull request #8871 from petrzjunior/bugfix-2.0.x [2.0.x][Language] Update Czech for Dec 2017	2017-12-24 18:48:59 -06:00
Thomas Moore	2917d1217d	Revert "Followup to #8698 " This reverts commit `4e891e9fb7`.	2017-12-23 17:00:33 -06:00
Petr Zahradník	69a51a426c	Update Czech language Dec 2017	2017-12-22 19:35:09 +01:00
Scott Lahteine	caa5093498	General DELTA_IK macro	2017-12-21 22:41:57 -06:00
Scott Lahteine	c694608450	Apply SCARA_FEEDRATE_SCALING to G2/G3	2017-12-21 22:33:27 -06:00
Scott Lahteine	97d509d4d2	Revert "Improved Core-compatible jerk code" Reverting commit `3cd7659`	2017-12-21 16:54:30 -06:00
Scott Lahteine	5bc2acc072	Restore position_float to fix LIN_ADVANCE	2017-12-21 16:45:46 -06:00
etagle	33a6fc70e4	Adding USB MSD implementation to the HAL: Now, when you plug the Native USB port of the Arduino DUE to your PC, it will be detected as a composite USB device: One of the devices is a USB CDC (Serial port over USB) with native USB handshake (no more overflows!!) (set SERIAL_PORT to -1 to use it as main serial port) and also, a MSD (USB Mass Storage Device) will be detected, and the SD card present on the socket will be reflected as a Removable disk on your PC)	2017-12-21 02:42:46 -03:00
etagle	d8a4db72ac	Reimplemented SW SPI for DUE in assembler. This allows to reach 12Mhz as SPI Clock and improves 4x the transfer speed to the SD card. This is REQUIRED so access to SD from USB is usable (allows 600Kbytes/second transfer speeds)	2017-12-21 02:35:49 -03:00
etagle	99b2fc2066	Adjusted timings on the ST7290 u8glib so RE-ARM and RAMPS4DUE have no problems when writing to the graphics LCD. This fixes Issue #8787 - Special thanks to Bergerac56 for testinf this out !!!	2017-12-21 02:33:22 -03:00
etagle	498ea7512a	Exposed SDCard interface to the public, to USB MSD is able to read/write sectors on the SD card	2017-12-21 02:30:18 -03:00
etagle	9aff55ed1f	Backported latest improvements and fixes from the SdFat liibrary to our own version. This includes support for CRC7 validation on commands and also, made sure that even if using software SPI implementations, SD card speed is properly adjusted when transitioning from INITIALIZATION to DATA TRANSFER mode. ALL HALs implement spiInit, even in SW SPI mode, and we NEED this change to improve 25x the transfer speed of the SD card and allow implementations of USB MSD	2017-12-21 02:29:00 -03:00
etagle	7447979110	Fixed some warnings on the MakerParts configuration, when compiling using the AVR toolchain (integer overflow on the preprocessor calculations)	2017-12-21 02:23:24 -03:00
etagle	b6f9c333d4	Adding hooks into the idle loop so HALs can execute 2nd plane tasks, such as serving SD card read/writes requested from the USB MSD layer	2017-12-21 02:22:08 -03:00
victorpv	2ec4113cb2	Changes to STM32F1 HAL (#8833 ) Some to correct missing files from previous PR to completely avoid HardwareTimer Class (reduce overhead). Some changes to formatting. Changes to DMA ADC to work correctly. Change to F1 sanity check.	2017-12-20 16:16:36 -06:00
Scott Lahteine	913d9e9a59	Matching sign across filwidth vars	2017-12-20 00:17:19 -06:00
Scott Lahteine	3cde4c78b2	Use wildcard *.cpp in Makefile Based on #8738 Addressing #8731	2017-12-19 23:44:46 -06:00
Scott Lahteine	fdc5e72720	A single setting to validate filament width	2017-12-19 21:33:25 -06:00
Scott Lahteine	93a6a4e1a8	Add VOLUMETRIC capability item	2017-12-19 20:11:23 -06:00
Scott Lahteine	933f76fda3	Option to disable all volumetric extrusion	2017-12-19 19:51:25 -06:00
Scott Lahteine	31e33d2acd	Add NO_VOLUMETRICS to example configs	2017-12-19 19:51:25 -06:00
Scott Lahteine	fc9ee1a4de	Fix up serial sanity check	2017-12-19 19:11:43 -06:00
Scott Lahteine	de5ca96654	More parity with 1.1.x, plus whitespace	2017-12-19 18:36:16 -06:00
Scott Lahteine	a891d8d738	Merge pull request #8820 from thinkyhead/bf2_mks_sbase_spi [2.0.x] Fix SDSUPPORT for MKS SBASE	2017-12-17 21:15:49 -06:00
Scott Lahteine	097a26007f	Fix SDSUPPORT for MKS SBASE Fix supplied by @cjsoong in https://github.com/MarlinFirmware/Marlin/issues/8750#issuecomment-350779983	2017-12-17 03:05:33 -06:00
Scott Lahteine	8df5955da4	Revert "Reset timer count before first block step" This reverts commit `5cf6a062e3`.	2017-12-17 02:37:35 -06:00
Scott Lahteine	957bbab57f	Update inc files for parity with 1.1.x	2017-12-16 20:20:06 -06:00
Scott Lahteine	f79026acc1	Apply MKS_12864OLED_SSD1306 to examples Followup to #8814	2017-12-16 20:15:36 -06:00
Dan Delaney	b055d8c39c	[2.0.x] Adding support for using the MKS_12864OLED with the SSD1306 controller (#8814 ) * Adding support for using the MKS_12864OLED with the SSD1306 controller * Update comment for correct controller type	2017-12-16 18:47:04 -06:00
Scott Lahteine	15d05748df	Adding support for the Tronxy and Zonestar LCD	2017-12-15 19:13:52 -06:00
Scott Lahteine	9abbcc3ee0	Apply ZONESTAR_LCD to example configs	2017-12-15 19:11:02 -06:00
Dave Johnson	aed0cfa3d1	Various fixes for 2.0.x configs	2017-12-15 17:09:46 -06:00
Scott Lahteine	674deaf223	Add NANODLP_ALL_AXIS to config examples	2017-12-15 16:22:56 -06:00
robpower	5595098063	V2 Extended NanoDLP_Z_Move_Sync to G4 & G28,Added all axis option.	2017-12-15 16:22:55 -06:00
Scott Lahteine	2b7db90340	Bring Malyan M200 config up to date	2017-12-15 15:47:22 -06:00
Scott Lahteine	8b12371e45	Change some hex case	2017-12-15 15:47:22 -06:00
Scott Lahteine	4782acf60e	Merge pull request #8780 from fiveangle/bf2-typo [2.0.x] typo in Marlin.cpp	2017-12-15 15:25:41 -06:00
teemuatlut	0cd1e91056	[2.0.x] TMC driver update (#8769 )	2017-12-15 15:03:14 -06:00
Scott Lahteine	09d13f186f	Correct unskew, after all	2017-12-15 14:24:20 -06:00
Dave Johnson	0d531d9655	Missing HAS_HEAT_BED conditional Fixes issue found in #8779	2017-12-15 11:33:37 -08:00
Dave Johnson	69efb87d19	typo in Marlin.cpp	2017-12-14 08:20:45 -08:00
Scott Lahteine	368c124de8	Fix Planner::unskew parity with skew	2017-12-13 17:46:48 -06:00
Scott Lahteine	cf2193c07f	Comment, fix filament width sensor	2017-12-13 02:32:34 -06:00
Scott Lahteine	a641992c1d	Merge pull request #8762 from victorpv/patch-2 [2.0.x] STM32F1 HAL: Fix issue #8585. Updates to readme.	2017-12-12 18:28:18 -06:00
Eduardo José Tagle	ac168a03c8	Fixes for the Arduino DUE HAL (Serial Port, Graphics Display, EEPROM emulation) (#8651 ) * Fixing the DUE serial port assignments: Now -1 means the SAM3x USB Device emulating a serial port, and 0 means the USB to serial adapter included as a programming port * Improving the Fast IO port access implementation on Arduino DUE * Implemented EEPROM emulation on Due by storing data on the internal FLASH (with wear leveling) * Implemented a Software SPI for the ST7920 graphics display for the Arduino RAMPS for DUE, as the default one in u8glib is clocking data too fast on ARM, and the display does not understand it. * Fixing the case where the serial port selected is the USB device * Adding configuration for the Makerparts 3D printer (www.makerparts.net) * Tuned MakerParts acceleration on X and Y axis so it never loses steps. Also adjusted pulses per mm to match default hw configuration * Fine tuned Maximum acceleration for MakerParts printer * Style cleanup * Style cleanup (2) * Style fixes (3) * Fixing the DUE serial port assignments: Now -1 means the SAM3x USB Device emulating a serial port, and 0 means the USB to serial adapter included as a programming port * Improving the Fast IO port access implementation on Arduino DUE * Implemented EEPROM emulation on Due by storing data on the internal FLASH (with wear leveling) * Implemented a Software SPI for the ST7920 graphics display for the Arduino RAMPS for DUE, as the default one in u8glib is clocking data too fast on ARM, and the display does not understand it. * Fixing the case where the serial port selected is the USB device * Adding configuration for the Makerparts 3D printer (www.makerparts.net) * Tuned MakerParts acceleration on X and Y axis so it never loses steps. Also adjusted pulses per mm to match default hw configuration * Fine tuned Maximum acceleration for MakerParts printer * Style cleanup * Style changes to u8g_dev_st7920_128_64_sw_spi.cpp * Even more improvements to the FastIO HAL for DUE. Now WRITE() is 2 ASM instructions, if value is constant, and 5 cycles if value is not constant. Previously, it was 7..8 cycles * After some problems and debugging, seems we need to align the interrupt vector table to 256 bytes, otherwise, the program sometimes stops working * Moved comments out of macro, otherwise, token pasting does not properly work sometimes * Improved Software SPI implementation on DUE: Now it honors the selected speed passed to spiInit(). This allows much faster SDCARD access, improving SDCARD menus and reducing latency * Update u8g_dev_st7920_128_64_sw_spi.cpp * Disabling EEPROM over FLASH emulatiion if an I2C or SPI EEPROM is present	2017-12-12 17:51:36 -06:00
victorpv	084f2434a7	Update readme.md	2017-12-11 23:14:13 -06:00
victorpv	7c7ae5ebef	Delete duplicated file.	2017-12-11 23:10:44 -06:00
victorpv	4feffca178	fix for issue #8585 As reported in this issue: https://github.com/MarlinFirmware/Marlin/issues/8585 I have it working fine in my local copy like that change.	2017-12-11 23:07:39 -06:00
Scott Lahteine	d568e586b7	Fix up ubl_motion indentation	2017-12-11 03:08:45 -06:00
Scott Lahteine	24f9bec6f4	UBL + DUAL_X_CARRIAGE compatibility	2017-12-11 03:08:18 -06:00
Scott Lahteine	6d0678d963	Omit unused UBL motion code	2017-12-11 03:08:18 -06:00
Scott Lahteine	3255712343	Skew Correction for UBL Also remove unused grid slicing function when using UBL segmented.	2017-12-11 03:08:15 -06:00
Scott Lahteine	3d796d8040	Move debug code	2017-12-11 00:27:06 -06:00
Scott Lahteine	3db5303bfe	_buffer_line => buffer_segment	2017-12-11 00:27:06 -06:00
Scott Lahteine	a71d2f3f40	UBL_DELTA => UBL_SEGMENTED	2017-12-11 00:27:06 -06:00
Scott Lahteine	73e32925e4	References are better for array args	2017-12-11 00:27:06 -06:00
Scott Lahteine	125c572d97	Tweak M114 detail	2017-12-11 00:27:06 -06:00
victorpv	a5150c83a2	[2.0.x] Multiple updates to STM32F1 HAL (#8733 ) * STM32F1 HAL Adding files for STM32F1 HAL based on libmaple/stm32duino core. Current persistent_store uses cardreader changes to be sent in separate commit, but could be changed to use i2c eeprom. There is another persistent_store implementation that uses the MCU flash memory to emulate eeprom Adding readme with some information about the stm32 HAL. * Switch to Timer4 to avoid a hard reset on STM32F103C6 boards On bluepill STM32F103C6 boards, using Timer5 results in a error() vector call. Switch to 4 since these are both general purpose, 16 bit timers. * Add support for EEPROM emulation using Flash Some low end machines doe not have EEPROM support. Simulate it using the last two pages of flash. Flash does not allow rewrite between erases, so skip writing the working version if that's enabled. * Basic Pins for a malyan M200 This is a work in progress to go hand in hand with the STM32 work. * Add support for ADC with DMA. This work has exposed a problem with the pin enumerations in STM boards vs what marlin expects (i.e, try defining PA0 as a temp pin). The hack can be removed with we go to fastio completely. To see this work, set something in adc_pins to a value like PA0 and connect your pullup resistor'd thermistor. * Missing file - change HAL_adc_init to actually do something We have an actual ADC init function now. * Remove pinmode hack Remove the pin mode hack that I was using to init PA0. Updated Readme.md * Several changes to timers and GPIO Faster GPIO, and faster timer functions by accesing registers and libmaple. Still more changes pending for the Timer's code to skip using the HardwareTimer class altogether. Switch all enums to be within #defines This change allows a user to have, for instance, TEMP_4 and TEMP_BED definied but nothing else. The enums which are not defined move "out", allowing the first ones to take the slots in the enum, and since the array is sized on ADC_PIN_COUNT, we always have the right size data and in order. * Update Malyan M200 pins Update Malyan M200 pins with correct fan values. * Test all pins on actual hardware, update definitions Some of the pin definitions were from knowlege base/pdfs. Now they've been tested against actual hardware. This should be very close to final. * Update HAL_timers_Stm32f1.cpp * Add sample configurations for Malyan M200 Add sample configuration for Malyan M200 without bed leveling, and move fan to auto cool E0 since this printer by default has only one fan. Choose the timer based on MCU defintion. Timer5 is not valid on C8/CB class boards, so use Timer4 for the step timer. readme.md update * Updates to timers, and some stm32 boards definitiions * Correct pin toggle macro. * Remove duplicated Malyan M200 entry from pins.h * Update configuration_store.cpp * Formatting, indentation * Formatting in HAL_Stm32f1.cpp	2017-12-10 23:12:45 -06:00
Scott Lahteine	204199e1ce	Only compare XYZ to check motion	2017-12-10 23:00:00 -06:00
Scott Lahteine	6686d937fb	Always report position on config load/reset	2017-12-10 21:47:14 -06:00
Scott Lahteine	117fc872a7	Update current position in M852	2017-12-10 21:39:49 -06:00
Scott Lahteine	7d2e850577	Have M420 report a changed position	2017-12-10 21:39:49 -06:00
Scott Lahteine	03ba79f144	Sync and report changed position	2017-12-10 21:39:49 -06:00
Scott Lahteine	5cf6a062e3	Reset timer count before first block step	2017-12-10 18:38:53 -06:00
Scott Lahteine	6149b82119	Allow setting current timer counter	2017-12-10 18:38:53 -06:00
Scott Lahteine	82ef6b5242	Add an option to specify "pulse" timer	2017-12-10 18:38:53 -06:00
Scott Lahteine	b8bc965414	General cleanup HAL timers	2017-12-10 18:38:52 -06:00
Scott Lahteine	69d49a2438	Shorter segments may be better	2017-12-09 06:29:14 -06:00
Scott Lahteine	d576f5408e	Add MiniRAMBo 1.0a board	2017-12-08 23:42:16 -06:00
Scott Lahteine	c40cb52342	Use MB() for Megatronics 3.1	2017-12-08 23:42:16 -06:00
Scott Lahteine	4fa65a5c25	TCNT0 => HAL_timer_get_current_count Fix #8710	2017-12-08 22:35:28 -06:00
AnHardt	b3daf6b5db	[2.0.x] better reverse pass (#8722 ) * repair reverse_pass() And make it readeble. This was broken a long time ago. Not competely unfunctional but far from optimal. * Minor speedup when calling calculate_trapezoid_for_block 2 float / to 1 foat / and 2 float * * Various style changes	2017-12-08 21:38:45 -06:00
Roxy-3D	f58eb391aa	[2.0.0] Better off mesh behavior for UBL (#8714 ) * Better off mesh behaviour for UBL * Suggested ubl.h changes	2017-12-08 19:00:59 -06:00
Jonathan Barchi	cffd052fee	[2.0.x] Fix for #8604 (#8717 ) * Nozzle.cpp: replace incorrect M_2_PI (2/pi) with 2.0 * M_PI * Use RADIANS(360) instead of 2 * M_PI	2017-12-08 18:50:05 -06:00
Bob-the-Kuhn	65d0f32f82	divide only when required	2017-12-08 18:14:27 -06:00
Scott Lahteine	728acf521c	Followup to #8706	2017-12-08 03:49:33 -06:00
Scott Lahteine	85c6ffbe0d	Discard all "continued" blocks on interrupted move	2017-12-08 02:32:58 -06:00
Scott Lahteine	4e891e9fb7	Followup to #8698	2017-12-08 01:01:12 -06:00
Scott Lahteine	de3d3b9cb1	Put FORCE_INLINE before static	2017-12-08 00:46:22 -06:00
Scott Lahteine	43ea265b78	Merge pull request #8685 from MateuszKrawczuk/patch-3 Update TEMP_BED_PIN in MIGHTYBOARD_REVE	2017-12-07 21:50:35 -06:00
Scott Lahteine	ae663a4198	PROBE_DOUBLE_TOUCH => MULTIPLE_PROBING	2017-12-07 16:44:13 -06:00
Scott Lahteine	d7800e7975	Apply MULTIPLE_PROBING to example configs	2017-12-07 16:44:12 -06:00
Scott Lahteine	542efda7db	Merge pull request #8698 from thinkyhead/bf2_replace_jerk_code [2.0.x] Improved Core-compatible jerk code	2017-12-07 00:17:00 -06:00
Scott Lahteine	3cd7659924	Improved Core-compatible jerk code	2017-12-06 23:57:57 -06:00
GMagician	99fcf60977	[2.x] addressing #8644 Removed missing include file	2017-12-06 23:49:30 -06:00
Scott Lahteine	81c0a918af	feed_factor => inverse_secs	2017-12-06 23:03:33 -06:00
Scott Lahteine	f206b81cf7	Sanity check skew+UBL	2017-12-06 22:56:58 -06:00
Scott Lahteine	9898b96992	No lcd_map_control flag in quick_stop	2017-12-06 22:23:34 -06:00
Scott Lahteine	840289e7cc	Use block cleaning instead of split flag	2017-12-06 22:22:58 -06:00
Scott Lahteine	90cf6a06be	Simplify G26 user_canceled	2017-12-06 22:02:54 -06:00
Scott Lahteine	cdfabbc507	Shorten error text in G29	2017-12-06 21:50:54 -06:00
Scott Lahteine	c846388a65	Standardize LCD interface code for UBL a little	2017-12-06 21:50:54 -06:00
Scott Lahteine	2fde60da12	Changes for parity with 1.1.x	2017-12-06 21:50:54 -06:00
Scott Lahteine	6040d4080e	Cleanup stepper ISR. Allow cleaning for endstops.	2017-12-06 21:23:37 -06:00
Scott Lahteine	a4e1d83599	Fix M503 S parameter	2017-12-06 21:23:37 -06:00
Scott Lahteine	a3b098b4be	Whitespace clean	2017-12-06 14:02:44 -06:00
AnHardt	a993c5227d	Don't split first_move while homing or probing While homing or probing it might be bad if the stop/trobe triggers during the first part and the second is still in the buffer.	2017-12-06 14:13:05 +01:00
Mateusz Krawczuk	5320906b0b	Update TEMP_BED_PIN in MIGHTYBOARD_REVE Pin K7 number in fastio1280.h is 69, but it's also ADC15 pin. To get correct value from ADC reading it should be set as 15.	2017-12-06 12:07:20 +01:00
Scott Lahteine	aeb5c623c1	Show "Level Bed Corners" with UBL too Addressing #8676	2017-12-05 21:58:43 -06:00
Scott Lahteine	5fbb2f121e	Remove skew warning that could crash the planner	2017-12-05 20:27:20 -06:00
Richard Wackerbarth	c1184552ac	Change K1 to required option PID_K1	2017-12-05 19:59:59 -06:00
revilor	9e3fbcf35c	fix for #8669 (#8679 ) * fix for #8669 * Update G28.cpp	2017-12-05 19:40:36 -06:00
Scott Lahteine	d8b444c144	Cleanup constextpr in planner.cpp	2017-12-05 18:55:57 -06:00
Scott Lahteine	a2372cfab5	Fix SKEW_CORRECTION without leveling	2017-12-05 18:48:34 -06:00
Scott Lahteine	4d3c3d0b73	Some ST7920 parity with 1.1.x Possibly more should be brought over? Discussion at #8471	2017-12-05 02:22:36 -06:00
Scott Lahteine	3748c28924	Fix MBL G29 without LCD Addressing https://github.com/MarlinFirmware/Marlin/pull/8575#discussion_r154536617	2017-12-05 01:57:45 -06:00
Scott Lahteine	772298257b	Creality pins spacing, MINIPANEL CS pin	2017-12-05 01:57:45 -06:00
Scott Lahteine	b27bc67271	Set initial endstops state	2017-12-05 01:10:31 -06:00
Scott Lahteine	b6ba32ce75	Support for RAMPS Plus (3DYMY)	2017-12-05 00:42:21 -06:00
Scott Lahteine	53694ebaa1	Folllwup to planner splitting	2017-12-04 18:55:23 -06:00
Scott Lahteine	37fff608b0	Merge pull request #8652 from fiveangle/bf2_usbcon_xonxoff [2.0.x] SERIAL_XON_XOFF not supported on USB-native AVR devices	2017-12-04 16:46:18 -06:00
Scott Lahteine	4b612f590c	Split first move to planner for better chaining	2017-12-04 15:27:47 -06:00
Unknown	91b63f6d69	SERIAL_XON_XOFF not supported on USB-native AVR devices User could enable SERIAL_XON_XOFF on USB-native devices and it would not be enabled without warning, but M115 would report the capability as available.	2017-12-04 03:57:01 -08:00
Bob-the-Kuhn	57fac33a74	add explanations 1) add explanations as to why software SPIs are selected 2) remove unused flag/option	2017-12-03 20:32:22 -06:00
Bob-the-Kuhn	bb23286383	add README & modify spi_pins.h still trying to fix file name	2017-12-03 20:00:56 -06:00
Scott Lahteine	dd8febca1a	Revert "Merge pull request #8611 from thinkyhead/bf2_planner_split_first" This reverts commit `824980e70e`, reversing changes made to `aa7efb96bf`.	2017-12-03 17:50:19 -06:00
Bob-the-Kuhn	fb44f8e50f	Merge pull request #8616 from hg42/bugfix-2.0.x [2.0.x][LPC1768][FIX] NUM_DIGITAL_PINS was negative, fixes PWM, arduino io functions, M42, M43, M226, probably also Servo, some LCD, soft spi, SoftwareSerial, ... may be others	2017-12-03 14:48:00 -06:00
Bob-the-Kuhn	4c5356f77a	Merge pull request #8622 from hg42/implement-LPC1768-GET_TIMER [2.0.x][LPC1768][fix] Implement GET_TIMER and other GET_xxx, fixes PWM	2017-12-03 14:46:22 -06:00
Harald Gutsche	f5b4e1ef4f	as a workaround enable PWM for any pin, see PR #8622	2017-12-03 20:37:02 +01:00
Scott Lahteine	6e944a413c	Merge pull request #8607 from benlye/patch-1 [2.0.x] Fix M49 so that it does not hang the terminal console	2017-12-03 03:41:33 -06:00
Scott Lahteine	967522b95e	Merge pull request #8615 from dot-bob/Duplicator_6-2.0.x [2.0.x] Example configurations for Wanhao Duplicator 6	2017-12-03 03:37:48 -06:00
Scott Lahteine	f4b16a3bac	Update M49.cpp	2017-12-03 03:34:56 -06:00
Scott Lahteine	f9327534f8	Merge pull request #8634 from fiveangle/bf2_report_xonxoff [2.0.x] Report SERIAL_XON_XOFF in M115	2017-12-03 02:18:50 -06:00
Scott Lahteine	da9f140829	Merge pull request #8637 from thinkyhead/bf2_ubl_uses_LSL [2.0.x] Use custom segment length for UBL Cartesian	2017-12-03 01:57:49 -06:00
Scott Lahteine	3a97de52ef	Split first move to planner for better chaining Address #8573, #8595	2017-12-03 01:27:14 -06:00
Scott Lahteine	24437de591	Use custom segment length for UBL Cartesian	2017-12-03 00:10:54 -06:00
Unknown	4c5ffd2349	[2.0.x] Report SERIAL_XON_XOFF in M115 -Report SERIAL_XON_XOFF in Extended Capabilites M115 report for hosts -Remove outdated 256 size limitation from comments on RX_BUFFER_SIZE defines -Update error message conditions	2017-12-02 21:08:06 -08:00
Scott Lahteine	aa7efb96bf	Bring configurations up to date	2017-12-02 21:50:51 -06:00
Scott Lahteine	63a91cd37a	Fix a homing comment	2017-12-02 21:02:37 -06:00
Scott Lahteine	8056120195	Rename inverse_mm_s => inverse_secs	2017-12-02 20:28:09 -06:00
Scott Lahteine	23557f8e77	Remove obsolete de_float	2017-12-02 20:23:10 -06:00
Jonathan Barchi	05f8e98c4a	Fix for issue #8629 - mismatch between number of stored and loaded dummy items on non-delta machines. (#8631 )	2017-12-02 19:04:58 -06:00
Roxy-3D	48fb4e0932	Get Bi-Linear to work with G26 More corrections to make that happen...	2017-12-02 14:14:24 -06:00
Roxy-3D	0850b38b45	Get Bi-Linear working with G26 G26 uses logic that looks like: ``` ex = _GET_MESH_X(i + 1) - (SIZE_OF_INTERSECTION_CIRCLES - (SIZE_OF_CROSSHAIRS)); ``` The Bi-Linear macros need parenthesis to work correctly.	2017-12-02 14:10:30 -06:00
Scott Lahteine	000b3b3117	Comment/cleanup of motion code	2017-12-02 01:09:55 -06:00
Scott Lahteine	046a1ad331	Merge pull request #8625 from tcm0116/2.0.x-G33 [2.0.x] Fix missing return values in G33_auto_tune	2017-12-02 00:51:19 -06:00
Thomas Moore	b35c3b5eb8	Fix missing return values in G33_auto_tune	2017-12-01 21:29:16 -06:00
Scott Lahteine	45c2388a58	Apply const to thermal_runaway_protection args	2017-12-01 19:42:44 -06:00
Scott Lahteine	0154e3480c	New feature: BED_SKEW_CORRECTION	2017-12-01 19:39:49 -06:00
Scott Lahteine	082ab8fcab	Add SKEW_CORRECTION to example configs	2017-12-01 19:22:27 -06:00
Unknown	d1f11e9c10	fix missing GET_TIMER (used by PWM for Ex_AUTO_FAN)	2017-12-01 22:28:55 +01:00
Harald Gutsche	dd1b503f64	fix NUM_DIGITAL_PINS being negative for more than 127 digital pins	2017-12-01 07:39:46 +01:00
dot-bob	bd45d0363d	Add default configurations for the Wanhao Duplicator 6.	2017-11-30 23:24:33 -07:00
Scott Lahteine	91fb6231b2	Fix EEPROM V45 header, layout	2017-11-30 22:45:17 -06:00
Roxy-3D	94e6b2976e	Restore correct G26 values for gMax 1.5+ printer	2017-11-30 18:12:17 -06:00
Scott Lahteine	dd3ce40826	Drop Planner::position_float, use int types	2017-11-30 17:43:31 -06:00
Scott Lahteine	ec6ca37ed3	Fix (un)apply_leveling fade bug	2017-11-30 17:25:44 -06:00
Scott Lahteine	a52fec6ac4	Planner class parity with 1.1.x	2017-11-30 15:55:08 -06:00
Ben Lye	1f3ad461bc	Update M49.cpp Fix M49 so that it does not hang the terminal console.	2017-11-30 20:17:44 +00:00
Scott Lahteine	e37dd64548	Apply LEDColor, language fixes	2017-11-29 23:58:12 -06:00
Scott Lahteine	8f90642eea	LED_CONTROL_MENU config changes	2017-11-29 21:02:56 -06:00
Tannoo	cf0f78336b	New Feature: LED_CONTROL_MENU	2017-11-29 21:02:55 -06:00
Scott Lahteine	23e45fa3c4	Apply const to some planner vars	2017-11-29 21:02:55 -06:00
Scott Lahteine	7c61bcb058	Apply SEGMENT_LEVELED_MOVES to example configs	2017-11-29 16:57:31 -06:00
Scott Lahteine	ef2531558c	Add an option to segment leveled moves	2017-11-29 16:57:30 -06:00
Scott Lahteine	285b868e9b	Tweak planner code style	2017-11-29 15:22:18 -06:00
Scott Lahteine	1f2acc33bc	Tweaks for check_axes_activity	2017-11-28 18:41:13 -06:00
Vitaliy Sapyanov	7f88334aa3	Done cleanup and removed duplicates in pins_RuRAMPS4D.h (#8582 ) Remove duplicates, with followup fixes	2017-11-28 18:33:12 -06:00
Scott Lahteine	a8aa43ce2d	Merge pull request #8587 from AnHardt/2_Fix_WDTO_during_long_DELTA_moves [2.0.x] Fix WDTO during long delta moves	2017-11-28 17:29:18 -06:00
Scott Lahteine	4793c34c53	Fix M290 boolval bug Fix #8577	2017-11-28 17:21:33 -06:00
Scott Lahteine	16baa48699	Fix #8579 Fan speed code fell into a curly brace	2017-11-28 16:12:14 -06:00
AnHardt	02aa93a6ad	Fix Watchdog time out during long lasting DELTA moves During long lasting moves of a delta machine neither the temperatures are maintained nor buttons checked nor ... . The fix is to call 'manage_heater()' and 'idle()' every now and then in the loop where the move is segmented. The code is abot the same as in G2_G3 wher we had the same problem with too large circles lasting too long. Fixing #7510	2017-11-28 17:03:51 +01:00
Scott Lahteine	fadf9eb2d7	Simplify midpos calculation	2017-11-27 14:00:35 -06:00
Scott Lahteine	0880031e8e	Satisfy M702 dependencies	2017-11-27 13:39:59 -06:00
Scott Lahteine	0786b61ce7	Followup to #8575	2017-11-27 12:58:40 -06:00
Scott Lahteine	276271e72f	Make MBL work more like PROBE_MANUALLY	2017-11-27 02:12:29 -06:00
Scott Lahteine	94cb412e45	Allow override of probe bounds	2017-11-26 20:55:27 -06:00
Scott Lahteine	c8718aa111	Spacing, macros in LPC1768_PWM	2017-11-26 20:20:05 -06:00
Scott Lahteine	a67cf78c6b	Clean up whitespace, spacing	2017-11-26 20:18:52 -06:00
Scott Lahteine	f0dd4e3fa0	Bootscreen parity with 1.1.x	2017-11-26 20:07:17 -06:00
Scott Lahteine	b634bfe1b1	Tweak to readDir code	2017-11-26 18:25:00 -06:00
Scott Lahteine	7be4857ab9	Tweak BLOCK_BUFFER_SIZE description	2017-11-26 17:36:40 -06:00
Bob-the-Kuhn	7d8b66e207	Merge pull request #8570 from Bob-the-Kuhn/Sbase-PWM [2.0.x] MKS Sbase - add servo pin definitions and add directly controlled PWM	2017-11-26 09:36:18 -06:00
Bob-the-Kuhn	59b32c25b5	MKS Sbase changes	2017-11-26 07:47:06 -06:00
Scott Lahteine	f90c075d1f	SD Menu patches	2017-11-26 01:14:18 -06:00
Scott Lahteine	9b64be0bc5	Fixes for leveling sub-menus	2017-11-26 00:05:36 -06:00
Scott Lahteine	25674da90c	Tweaks to do_blocking_move	2017-11-25 23:31:16 -06:00
Scott Lahteine	22b897e77d	Show M211 output with workspace offset	2017-11-25 20:48:20 -06:00
Scott Lahteine	d06e29846d	Loosen HAS_BED_PROBE definition	2017-11-25 20:11:21 -06:00
Roxy-3D	e48fcad615	change G26 and G29 bit function names to avoid HAL collision	2017-11-25 19:58:45 -06:00
Scott Lahteine	41ec449960	Fix G26 error return	2017-11-25 19:53:14 -06:00
Scott Lahteine	9badf5dc0d	Fix Micromake C1 config	2017-11-25 18:41:07 -06:00
Scott Lahteine	7576ad7fc2	Merge pull request #8554 from tcm0116/2.0.x-cleanup [2.0.x] Fix for #8525 and other cleanup	2017-11-25 18:19:54 -06:00
Scott Lahteine	27c5692b13	Syntax tweaks	2017-11-25 18:13:36 -06:00
Scott Lahteine	d18d40e1d6	M290 report on change, P0 to leave Probe Z Offset alone	2017-11-25 16:47:39 -06:00
LVD-AC	65f365333f	[2.0.x] G33 probe error handling	2017-11-25 16:19:10 -06:00
Bob-the-Kuhn	8c69adba8b	Merge pull request #8553 from Bob-the-Kuhn/2.0.x-U8Glib-follow-up [2.0.X] U8Glib follow up	2017-11-25 14:26:32 -06:00
Scott Lahteine	be00e421a7	Patch up M290, M851	2017-11-25 14:11:57 -06:00
Bob-the-Kuhn	fc40d56131	fixed error, updated defaults, added notes Travis fix - only allow ultralcd_st7920_u8glib_rrd_AVR.cpp to compile when ST7920 selected	2017-11-25 12:35:03 -06:00
Roxy-3D	d29cb646e3	Fix erroneous reference to temperature in time calculations Travis is having problems at: https://github.com/MarlinFirmware/Marlin/pull/8560 So... doing a direct commit to get things correct. Bugfix_v1.1.x does not have this bug. Nothing needs to be done to that branch.	2017-11-25 10:40:56 -06:00
Thomas Moore	7bb1721f35	Fix _BV already defined warnings for Teensy	2017-11-24 22:34:39 -06:00
Thomas Moore	5f9592a523	Cleanup narrowing warning in pin_is_protected	2017-11-24 22:15:56 -06:00
Thomas Moore	34eaaab5fb	Fix _BV already defined warnings	2017-11-24 21:59:31 -06:00
Thomas Moore	2ea779e560	Allow bed probe sanity checks to run	2017-11-24 21:59:01 -06:00
Scott Lahteine	d24b1190bd	Don't use Z_MIN_PROBE_ENDSTOP on DELTA	2017-11-24 18:24:22 -06:00
Scott Lahteine	e34c6827ea	Init MIXING virtual tools as switching	2017-11-24 18:02:09 -06:00
Scott Lahteine	a9ecb975b2	Apply LINEAR_UNIT to M503 output for M200	2017-11-24 17:32:48 -06:00
Scott Lahteine	d95ee0f003	Merge pull request #8551 from revilor/bugfix-2.0.x MK2_MULTIPLEXER does not require E2/E3 stepper pins	2017-11-24 17:16:23 -06:00
Scott Lahteine	80ada58818	One fewer function call in probe_pt	2017-11-24 17:10:38 -06:00
oliver	92a0dc552a	MK2_MULTIPLEXER does not require E2/E3 stepper pins	2017-11-24 23:56:39 +01:00
Scott Lahteine	b49acce035	Tweaks for lcd_external_control	2017-11-24 15:53:25 -06:00
Scott Lahteine	1ef1052ae1	Phatter arrows for Z offset overlay	2017-11-24 15:53:25 -06:00
Scott Lahteine	5926c9c97b	Followup for MESH_EDIT_GFX_OVERLAY	2017-11-24 15:53:25 -06:00
Scott Lahteine	ab03a31cc9	Patch G0/G1 for NANODLP_Z_SYNC	2017-11-24 14:11:12 -06:00
Scott Lahteine	a766dfb3b1	Merge pull request #8536 from thinkyhead/bf2_nanodlp_z_move_sync [2.0.x] Implement NANODLP_Z_SYNC for 2.0.x	2017-11-24 13:11:14 -06:00
Scott Lahteine	01e207213f	Fix MK2_MULTIPLEXER stepper indirection	2017-11-24 12:49:28 -06:00
Roxy-3D	ec04cf27d3	Fix the G26 out of scope identifiers in the v2.0.0 branch (#8543 ) These changes may need to be warmed over. I tried to fix things with the least amount of disruption. I just wanted to get the bugfix_v2.0.0 branch working for people again.	2017-11-24 10:39:56 -06:00
Scott Lahteine	dc82babe8e	Implement NANODLP_Z_SYNC for 2.0.x	2017-11-24 00:28:06 -06:00
Scott Lahteine	c6b0c104bb	Adapt G26 to work for all meshes	2017-11-23 22:31:37 -06:00
Scott Lahteine	5ce7f23afa	Config option G26_MESH_VALIDATION for all meshes	2017-11-23 21:43:23 -06:00
Scott Lahteine	c19eb33408	Move G26 to gcode sub-folder	2017-11-23 21:43:23 -06:00
Scott Lahteine	a03f93bab4	Fix fan kickstart	2017-11-23 21:42:45 -06:00
Scott Lahteine	9e3c41f9e8	Tweak fan kickstart / speed code	2017-11-23 15:20:35 -06:00
GMagician	118ac61e59	[2.0.x] Tool change bad behaviour fix Previous fix did not work as expected when axeis not homed. It raise Z but never return to original position	2017-11-22 20:24:03 -06:00
Scott Lahteine	c35d27f77c	Merge pull request #8299 from tcm0116/2.0.x-BIQU_BQ111-A4 [2.0.x] Add BIQU BQ111-A4 board	2017-11-22 19:16:04 -06:00
Scott Lahteine	1685cd193b	Tweak char_mode init	2017-11-22 19:12:08 -06:00
Scott Lahteine	9406c87a97	Fix up LCD init / charset	2017-11-22 18:22:55 -06:00
Thomas Moore	fa577392b2	Add BIQU BQ111-A4 board	2017-11-22 16:34:59 -06:00
Scott Lahteine	c2fc78c3a8	#ifndef => #if !PIN_EXISTS	2017-11-22 16:28:52 -06:00
Scott Lahteine	c613a1ed38	Fix indentation, stepper.h dependency, etc.	2017-11-22 14:55:30 -06:00
teemuatlut	f011a32771	Board definitions for Ultratronics Pro v1.0	2017-11-22 14:55:24 -06:00
Bob-the-Kuhn	9dad534f02	fixed	2017-11-21 21:37:20 -06:00
Scott Lahteine	4371345cbe	Don't re-init graphical LCD after boot screen Followup to `13a3fb1acc`	2017-11-21 18:23:39 -06:00
Scott Lahteine	56c02b7f59	Shift register buttons question Can LCD shift registers keep up with faster MCUs?	2017-11-21 16:12:40 -06:00
Scott Lahteine	3994d3b935	General cosmetic LCD	2017-11-21 16:12:40 -06:00
Scott Lahteine	617993d0ea	Patch for !!TEST (was _BV once?)	2017-11-21 16:12:08 -06:00
Scott Lahteine	3269d8dd62	Tweak M42 var	2017-11-21 16:12:08 -06:00
Mateusz Krawczuk	bb1a6eea88	Remove pin count check for MIGTHYBOARD_REVE Remove assert and unused code since it is implemented in pinsDebug_plus_70.h	2017-11-21 14:38:02 +01:00
Scott Lahteine	1ce0fb336b	Patch Max7219_LED_Set input args	2017-11-20 21:15:15 -06:00
GMagician	a61127a421	[2.0.x] tool change bad behaviours This will solve 2 issues on tool change. 1) when no home is done ("no_move" is set) tool change should never move X & Y because... I don't know where I am...only Z should be adjusted to avoid bed collision if other nozzle is lower than current. Since no move no bed level matrix should be applied 2) When SWITCHING_NOZZLE is enabled and system is homed there are two movements to go to destination, but first can move Z to older position and then crash on the bed	2017-11-20 16:34:55 -06:00
Vitaliy Sapyanov	e2724c68ab	Update pins_RURAMPS4D.h Add and bugfix pins	2017-11-20 15:36:13 -06:00
Scott Lahteine	9770062309	Merge pull request #8463 from thinkyhead/bf2_32bit_M42 [2.0.x] Updates to Anet A8 configurations	2017-11-20 15:12:30 -06:00
Scott Lahteine	3066655727	Try port*100+pin, fix config dependency	2017-11-20 13:58:23 -06:00
Scott Lahteine	ba8bc7ea80	Cosmetic tweaks	2017-11-20 13:58:02 -06:00
Scott Lahteine	f409147116	Fix P2_04, P2_05	2017-11-20 13:58:02 -06:00
Bob-the-Kuhn	a28ccabe2a	M42 P1.20 fix	2017-11-20 13:58:02 -06:00
Unknown	33912fa7e8	Update Temperature::setPwmFrequency prototype to match source Introduced with #8446	2017-11-20 01:50:41 -08:00
Scott Lahteine	b9327a4d16	Misc. general cleanup	2017-11-19 15:43:39 -06:00
Scott Lahteine	8836623e0f	Fix `sq`/`min`/`max` macros after platform headers	2017-11-19 15:43:39 -06:00
Scott Lahteine	fe4f009fdd	32-bit unless…	2017-11-19 15:43:38 -06:00
Scott Lahteine	25af9decfe	Remove enum.h include of MarlinConfig.h	2017-11-19 15:43:38 -06:00
Scott Lahteine	1d4571b88d	Dependency adjustments	2017-11-19 15:43:38 -06:00
Scott Lahteine	550f1025f0	Try using <Arduino.h> everywhere	2017-11-19 14:23:02 -06:00
Scott Lahteine	c0000a0cdc	Move servo code to modules/servo.*	2017-11-19 14:23:02 -06:00
Scott Lahteine	81bc428b48	Don't compile custom u8g without DOGLCD	2017-11-19 13:58:38 -06:00
Bob-the-Kuhn	c14000775b	PWM fixes, slow down fan update include LPC1768 syntax for M42 couple more pin_t changes consistency change M42 to R, P format Revert "change M42 to R, P format" This reverts commit 01f12f579ec9ccc1bb9126e68d2c86449e9b7edf.	2017-11-18 07:05:50 -06:00
Scott Lahteine	60adc6ff02	Display filwidth ratio in terms of E mm	2017-11-18 07:01:49 -06:00
Scott Lahteine	6e533748eb	Fixes #8472	2017-11-18 05:15:55 -06:00
Scott Lahteine	485abb023b	Merge pull request #8456 from thinkyhead/bf2_wednesday_tweaks [2.0] No retroactive adjustment with M851 Z	2017-11-18 04:49:53 -06:00
Scott Lahteine	3bba7d60f3	No retroactive changes with M851 Z If using babystep to adjust the Z probe offset, the axis will move and the mesh will be updated at the same time, causing a doubling of the Z offset over the rest of the print. To correct for this, the current Z position would need to be modified in the opposite direction, canceling out the additional Z offset added to the mesh. This would be confusing to users, and moreover it would not be accurate without also taking the current Z fade level and current Z height into account. It might make sense to change the mesh in the case where no babystepping is taking place, but this could be considered an undesirable side-effect of changing the `zprobe_zoffset`. One way to remedy this would be to return to storing the mesh with `zprobe_zoffset` included, then subtracting `zprobe_zoffset` from the returned Z value. Thus, a babystep moving the Z axis up 1mm would subtract 1 from `zprobe_zoffset` while adding 1 to all mesh Z values. Without including the `zprobe_zoffset` in the `z_values` there is no safe way to alter the mesh in conjunction with babystepping, although it's fine without it.	2017-11-18 03:36:39 -06:00
Scott Lahteine	32512332df	Apply some formatting	2017-11-18 03:12:30 -06:00
Scott Lahteine	7dacc999b9	Remove obsolete show_bootscreen var	2017-11-17 17:01:43 -06:00
Roxy-3D	9729528d13	Update UBL's Delta Probable locations This is a non-intuitive change. @oldmcg says in this post https://github.com/MarlinFirmware/Marlin/issues/7572#issuecomment-340641207 that using DELTA_PRINTABLE_RADIUS is better than DELTA_PROBABLE_RADIUS for setting the probe limits. This is because the automatic probe code checks all locations for being reachable by the probe prior to doing the probe.	2017-11-17 16:44:57 -06:00
Scott Lahteine	d48cb6bf41	Apply coding standards to Max7219	2017-11-17 15:32:21 -06:00
Scott Lahteine	bd8bcf06e7	Updates to Anet A8 configurations Based on #8426	2017-11-16 23:19:36 -06:00
Bob-the-Kuhn	7eea000f4b	E0 auto fan fixes	2017-11-16 18:42:56 -06:00
Scott Lahteine	b2dda096fe	Fix FILAMENT_LCD_DISPLAY for disabled state	2017-11-16 16:57:48 -06:00
Scott Lahteine	1e8afb66b7	Fix a planner comment	2017-11-16 16:57:47 -06:00
Scott Lahteine	50f09cc029	Miscellaneous cleanup	2017-11-16 00:47:16 -06:00
Scott Lahteine	63257dc083	Fix M503 output for M145 Fixes #7978	2017-11-15 04:00:18 -06:00
Scott Lahteine	0918dae66e	Add OV() macro for use in thermistor tables	2017-11-15 03:15:18 -06:00
Scott Lahteine	24057270a3	Merge pull request #8420 from RowanMeara/rm-dithering-2.0.x [2.0.x] Fix Software Fan PWM	2017-11-15 02:30:19 -06:00
Scott Lahteine	5079a02c90	Add HAL_SERVO_LIB to HAL_Due.h	2017-11-15 02:07:01 -06:00
Scott Lahteine	9c3761047e	Merge pull request #8434 from thinkyhead/bf2_fix_M32_subroutines [2.0] Fix 'M32 P' subroutines	2017-11-15 01:15:02 -06:00
Scott Lahteine	e0d367f1fb	Fix M32 P subroutine handling	2017-11-15 00:44:21 -06:00
Scott Lahteine	9f8b4c5ee8	Patch SD lib files for readability	2017-11-15 00:44:21 -06:00
Scott Lahteine	2c8c30437e	Fix parser parameter value handling	2017-11-14 23:20:33 -06:00
RowanMeara	6131533157	Change dithering behavior to intended.	2017-11-14 00:47:07 -08:00
Scott Lahteine	e70b44dc0b	Make sure leveled[] is defined for later use	2017-11-14 02:13:38 -06:00
Scott Lahteine	54774841ba	Merge pull request #8416 from thinkyhead/bf2_M114_DETAIL [2.0] Add M114_DETAIL to Configuration_adv.h	2017-11-14 00:28:55 -06:00
Scott Lahteine	009e3a7aa7	Add M114_DETAIL to Configuration_adv.h	2017-11-14 00:03:17 -06:00
Scott Lahteine	6d6c3b1e97	Fix up REPRAPWORLD_KEYPAD defines	2017-11-13 22:14:54 -06:00
Scott Lahteine	3f0a982b8c	Move Filament Width Sensor to Configuration_adv.h	2017-11-13 21:05:57 -06:00
Scott Lahteine	b76e173205	Move test extrusion options under G26	2017-11-13 21:05:57 -06:00
Scott Lahteine	14ebedca27	Drop unused LARGE_FLASH option	2017-11-13 15:44:24 -06:00
Scott Lahteine	b7feb53e8a	Support for Extrudrboard in Printrboard Rev.F	2017-11-13 15:44:23 -06:00
Scott Lahteine	91baca6abb	Patches for compiler warnings/errors	2017-11-13 04:43:47 -06:00
Scott Lahteine	2f73dec077	Apply native workspace fixes for G92, G53-59	2017-11-13 02:09:12 -06:00
Scott Lahteine	04abd8d459	Improve and clarify M428 code	2017-11-13 02:09:11 -06:00
Dave Johnson	c009a990e4	[2.0.x] Fix some 8-bit Teensyduino compile warnings (#8385 ) * Fix some 8-bit Teensyduino compile warnings -Override Teensyduino legacy NOT_A_PIN 127 define -some fixups for Printrboard_RevF pins * Proper cleanup of Printrboard Rev.F pins * Apply LCD fixes to Printrboard v1	2017-11-13 01:07:59 -06:00
Scott Lahteine	e8e92f8969	No leveling data in M114 if no leveling is enabled	2017-11-12 23:03:38 -06:00
Scott Lahteine	f5d210c35c	Fix report_current_position	2017-11-12 23:02:53 -06:00
Roxy-3D	faaae7a1b2	Provide more clearance for BL-Touch probe	2017-11-12 13:11:22 -06:00
Scott Lahteine	06ee6584fd	Remove offsets from soft endstops, tool change	2017-11-11 22:47:38 -06:00
Scott Lahteine	c938273bd5	Coding standard patch of M290	2017-11-11 22:14:21 -06:00
Scott Lahteine	98c1265e3b	Disable laser power when PWM goes to 0	2017-11-11 22:00:22 -06:00
Scott Lahteine	d4a1154c25	Use do_blocking_move_to where possible	2017-11-10 20:55:23 -06:00
Scott Lahteine	36426af564	Merge pull request #8356 from tcm0116/2.0.x-M600 [2.0.x] Normalize load/unload length in M600	2017-11-10 19:44:08 -06:00
Scott Lahteine	1ed86adf9c	Cleanup around updatePID	2017-11-10 19:27:34 -06:00
Scott Lahteine	75a58ee4b8	Fix position_is_reachable bug in waiting	2017-11-10 19:27:33 -06:00
LVD-AC	e334efb2a7	PROBE_MANUALLY etc.	2017-11-10 19:27:33 -06:00
Bob-the-Kuhn	b6415dc169	finish	2017-11-10 14:39:55 -06:00
Scott Lahteine	0efa66be0b	Updates to Traditional Chinese From @cheton at #8347	2017-11-10 04:52:20 -06:00
Scott Lahteine	cba9c1cf9e	Add pre-calculated planner.e_factor	2017-11-10 03:14:24 -06:00
Thomas Moore	600c85226e	Normalize load/unload length in M600	2017-11-10 02:31:46 -06:00
Scott Lahteine	81b91b3f9d	Clean up some trailing white-space	2017-11-10 02:31:04 -06:00
Roxy-3D	2f9848ede3	Correct gMax 1.5+ example file And... Keep both branches in synchronization.	2017-11-09 23:44:14 -06:00
Scott Lahteine	006dad4b52	Add pins_RURAMPS4D.h & change pins.h http://3dtoday.ru/blogs/svs0724/ruramps4d-ramps-for-adruino-due-the-pilot-shipment-available-for-zack/	2017-11-09 21:51:06 -06:00
Scott Lahteine	00514857e9	SBASE serial port -1, RAMPS spacing	2017-11-09 21:41:07 -06:00
Scott Lahteine	c66696c507	Merge pull request #8344 from tcm0116/2.0.x-delta_height [2.0.x] Add delta_height variable in lieu of using home_offset	2017-11-09 01:21:53 -06:00
Scott Lahteine	22e18fe832	Patch _manual_goto_xy for kinematics	2017-11-08 22:21:38 -06:00
Scott Lahteine	0cfb936dd1	Clarify some motion code	2017-11-08 22:15:55 -06:00
Thomas Moore	f34c3597dc	Add delta_height variable in lieu of using home_offset	2017-11-08 22:10:08 -06:00
Bob-the-Kuhn	d47fbf791b	Arduini IDE compatibility changes changed includes to make Arduino IDE happy	2017-11-08 20:49:49 -06:00
Scott Lahteine	95ea43bde4	Update XYZ dual stepper configurations	2017-11-08 20:31:43 -06:00
Scott Lahteine	b0b4a20930	Tweaks to core motion code	2017-11-08 20:09:09 -06:00
Scott Lahteine	8805e24cc7	Fix tilt_mesh_based_on_probed_grid output bug	2017-11-08 20:06:20 -06:00
Scott Lahteine	24437fbb13	Fix G26 Y argument bug	2017-11-08 19:20:10 -06:00
Scott Lahteine	09b05c9d79	Merge pull request #8321 from Bob-the-Kuhn/pins_re-arm 2.0.x - pins_RAMPS_RE_ARM.h - add mega2560 pin numbers	2017-11-08 13:11:13 -06:00
Scott Lahteine	e6788bb6ae	Fix get_destination_from_command for E	2017-11-08 12:54:00 -06:00
Roxy-3D	967104e1ce	Default Extrusion Settings were off a few lines in some of the example config files. (#8333 )	2017-11-08 11:56:00 -06:00
Bob-the-Kuhn	8875885a15	pins add old names fix typo re-write PWM section, add "not on Re-ARM" list	2017-11-08 11:11:38 -06:00
Roxy-3D	1c6e83c137	if !HAS_MESH we still need to do some motion! (#8328 ) * if !HAS_MESH we still need to do some motion! Thank You MagoKimbra ! * Ooops.... need #else and not #elif	2017-11-08 09:42:21 -06:00
Scott Lahteine	82f45c3e6a	Patch G33 misuse of PROBE_MANUALLY	2017-11-08 00:36:06 -06:00
Scott Lahteine	064e6fe60e	Remove debugging pin toggle from LCD code	2017-11-07 23:00:54 -06:00
Bob-the-Kuhn	0483a7df91	AVR RRD works LPC1768 VIKI2 & RRDFG are working looks like all SPIs are working library change sh1106 locks up fixed lockup, started I2C SW com pretty re-org restore a few files make library happy switched HAL version of rrd fix travis error travis error fixes another travis fix cleanup minor update one more correct spacing in platformio.ini	2017-11-07 18:40:29 -06:00
Scott Lahteine	96c9d715f3	Patch abuse of sprintf_P in G33	2017-11-07 17:33:50 -06:00
Roxy-3D	ed62c621d7	Fix G26 Circle Drawing. Add Default Extrusion Settings (#8313 ) - Fix G26 Circle Drawing. - Add default extrusion settings so machine can print lines on print bed - Yet to be done: Get LCD Menu's to use these settings.	2017-11-07 17:13:53 -06:00
Scott Lahteine	8fea26aa9d	Fix PID_autotune watch temp increase value	2017-11-07 15:51:48 -06:00
Scott Lahteine	2c099fd4c2	Update Thermal Protection Documentation	2017-11-07 15:46:44 -06:00
Colten Edwards	a6160916b0	[2.0] Fix M48 for delta printers/ABL compile issue (#8286 ) * fix M48 for delta printers fix M48 for delta printers. home printer if not already homed. * remove ENABLED(DELTA) remove ENABLED(DELTA) as it is not needed. * Update M48.cpp * abl needs queue.h without queue.h abl will not compile since there is a script that runs at the end of it and we need to queue it up.	2017-11-07 15:36:33 -06:00
Scott Lahteine	17ef0a513b	Update G92 for native workspace	2017-11-07 13:07:16 -06:00
Scott Lahteine	b4bf8928aa	German language updates Corresponding to #8306	2017-11-07 12:10:29 -06:00
Thomas Moore	73ca5345e1	Fix Delta EEPROM	2017-11-07 16:48:21 +00:00
Scott Lahteine	714d2b9bbc	Merge pull request #8297 from thinkyhead/bf2_M118_and_others [2.0] Fix M118, compiler warnings, etc.	2017-11-06 23:25:49 -06:00
Alexey Shvetsov	83555933aa	Add platformio support for stm32 (#8246 ) [2.0] Add platformio support for stm32	2017-11-06 23:03:59 -06:00
Scott Lahteine	85a62bbf46	Misc. fixes to compiler warnings, etc.	2017-11-06 22:57:05 -06:00
Scott Lahteine	e6aba99f16	Fix M118 parameters, with strict guideline	2017-11-06 22:57:01 -06:00
Scott Lahteine	e9b1944a67	Patch non-extended font option	2017-11-06 21:42:21 -06:00
Roxy-3D	6324b09934	Revert "Fix EEPROM crc (#8284 )" (#8292 ) This reverts commit `172c36f517`.	2017-11-06 19:52:05 -06:00
Rowan Meara	172c36f517	Fix EEPROM crc (#8284 )	2017-11-06 19:19:30 -06:00
Scott Lahteine	cc4d28b73c	Update bilinear for native workspace	2017-11-06 17:04:41 -06:00
Scott Lahteine	94c7205d64	Merge pull request #8281 from thinkyhead/bf2_alligator_dac [2.0] Use fastio for Alligator dac084s085, etc.	2017-11-06 12:16:18 -06:00
Scott Lahteine	2246316605	Fix name collision. timer_t => hal_timer_t	2017-11-05 19:31:07 -06:00
Jason Hitesman	4efaef7039	[2.0.x] Fix archim2 SSDS define (#8278 ) * Fix SSDS define * Update pins_ARCHIM2.h	2017-11-05 19:23:19 -06:00
Scott Lahteine	c8dfa26bc8	Use fastio for STM32F1 endstop interrupts	2017-11-05 19:20:28 -06:00
Scott Lahteine	185dec800b	Use fastio for HAL SPI EEPROM	2017-11-05 19:20:03 -06:00
Scott Lahteine	297666ea14	Use fastio for Alligator dac084s085	2017-11-05 19:14:42 -06:00
Scott Lahteine	c5d95d318b	Merge pull request #8249 from thinkyhead/bf2_nozzle_cleanup [2.0] Cleanup Nozzle class, fix XY vs Z move order	2017-11-05 18:51:11 -06:00
Scott Lahteine	7e2fee9d56	Merge pull request #8274 from tcm0116/2.0.x-re_arm_D8 [2.0.x] Correct RAMPS_D8_PIN for Re-ARM	2017-11-05 18:39:28 -06:00
Scott Lahteine	59c558d612	Merge pull request #8275 from GMagician/2.0.x-Typo-fix [2.0.x] typo fix (removed spaces)	2017-11-05 18:39:04 -06:00
Scott Lahteine	be73d5cc08	Cleanup Nozzle class, fix XY vs Z move order	2017-11-05 18:31:07 -06:00
GMagician	9e93b7ccbd	[2.0.x] removed spaces Removed spaces in array declaration	2017-11-05 20:42:48 +01:00
Thomas Moore	b91a822d7a	Correct RAMPS_D8_PIN for Re-ARM	2017-11-05 13:03:42 -06:00
studiodyne	d295f984e3	Update fwretract.cpp	2017-11-05 15:42:30 +01:00
Scott Lahteine	1b40e9c464	Implement CNC_COORDINATE_SYSTEMS	2017-11-04 22:28:46 -05:00
Scott Lahteine	1b42fba39b	Add CNC_COORDINATE_SYSTEMS to configs	2017-11-04 22:28:46 -05:00
Scott Lahteine	a22434508f	Match tweaks to G33 from 1.1	2017-11-04 22:28:46 -05:00
Scott Lahteine	c07bbd4154	Prettify some EEPROM code	2017-11-04 22:28:46 -05:00
Scott Lahteine	d6aa127c76	Remove I2CPEM workspace offset	2017-11-04 22:28:46 -05:00
Scott Lahteine	79772219ae	Fix Fan Multiplexer init	2017-11-04 22:28:46 -05:00
Scott Lahteine	ca7d36d9ed	RAMPS pins for ANET_KEYPAD_LCD	2017-11-04 21:22:53 -05:00
Colten Edwards	e0a6ee8da5	[2.0] Fix up G33, LPC1768 + SDCARD_SORT_ALPHA (#8250 ) * Update Conditionals_post.h * Add a cast to round() to convert to a unsigned int Add's a cast to round() so that it will compile properly. round() returns a float which must be cast to a integer for the following % operation. Use a unsigned int as a negative index to an array is wrong. Should never be more than 255 points allowing us to use a 8 bit cast. * Update G33.cpp	2017-11-04 18:04:18 -05:00
Scott Lahteine	dac1f6fe74	Tweaks to cubic_b_spline code style	2017-11-04 14:46:10 -05:00
Scott Lahteine	4df024d7b9	Merge pull request #8234 from thinkyhead/bf2_native_operation [2.0.x] Operate in Native Machine Space	2017-11-04 14:31:44 -05:00
Scott Lahteine	601ccded89	Fix case-insensitive config issue	2017-11-04 14:10:13 -05:00
Scott Lahteine	f8393a0908	Operate in Native Machine Space	2017-11-04 00:05:38 -05:00
Scott Lahteine	d83a9a53e8	Merge pull request #8220 from thinkyhead/bf2_serial_port_-1 [2.0] Add SERIAL_PORT -1 option for configurators	2017-11-03 15:25:12 -05:00
Scott Lahteine	93ba72ea83	Add SERIAL_PORT -1, set on SBASE, STM32F103RET6	2017-11-03 15:22:45 -05:00
Scott Lahteine	7e43dd1d23	Fix probes configuration url Based on #8241 by @machaj	2017-11-03 13:35:40 -05:00
AnHardt	ca0e4b4e96	Some cleanup around 'lcd_bootscreen()' and 'lcd_kill_screen()' Move 'lcd_bootscreen()' from `lcd_init()` to 'setup()' where it is cexecute exactly once. Saves 'bool show_bootscreen'. Move the call of 'lcd_custom_bootscreen()' to the begin of 'lcd_bootscreen()'. Move the delays into the related functions. Move the picture loop around 'lcd_kill_screen()' into the function.	2017-11-03 12:02:48 +01:00
Scott Lahteine	84b93d941f	Merge pull request #8178 from thinkyhead/bf2_config_tweak [2.0.x] Faster menu navigation for Anet A8	2017-11-03 04:49:17 -05:00
teemuatlut	70be4d206e	[2.0.x] UltiMachine Archim2 (#8190 ) * UltiMachine Archim2 support * SPI gets included by the library * Invert TMC2130 diag pin state * Clean up Archim2 pins * Update Archim2 config * FAN2 -> FAN1 * Cleanup * Add brief Archim installation instructions * Bring pins into compliance * Update 1.0 SD Detect pin for 1.1 * Update Configuration.h * Update pins_ARCHIM2.h	2017-11-03 04:48:15 -05:00
Scott Lahteine	f3deb37bdf	Merge pull request #8236 from thinkyhead/bf2_protect_M303 [2.0.x] M303 thermal runaway protection	2017-11-03 04:42:14 -05:00
Scott Lahteine	31f112cf58	Cleanup trailing whitespace	2017-11-03 04:07:45 -05:00
Scott Lahteine	2f9e42feb9	M303 thermal runaway protection	2017-11-03 03:57:46 -05:00
Scott Lahteine	e5ae545647	Remove ADCKey steps acceleration	2017-11-03 03:41:55 -05:00
Luc Van Daele	6827e243a0	[2.0.x] G33 magic numbers (#8171 ) * [2.0.x] G33 magic numbers * oops * Comments * oops * warning * better comment section * remarks * extra grids	2017-11-03 03:36:16 -05:00
Scott Lahteine	8735ae984b	Merge pull request #8227 from tcm0116/2.0.x-pin_mapping LPC1768: updates to use the new pin_t typedef	2017-11-03 03:10:19 -05:00
AnHardt	c72a0610b4	Fix watchdog in WATCHDOG_RESET_MANUAL mode AVR	2017-11-03 04:43:00 +01:00
Thomas Moore	13d839795c	LPC1768: updates to use the new pin_t typedef	2017-11-02 18:43:57 -05:00
Scott Lahteine	eb13b8d985	Add MKS Gen L board	2017-11-02 17:06:08 -05:00
Morten	063e957fc4	Update pins_MKS_SBASE.h (#8188 ) * Update pins_MKS_SBASE.h Deleted E_MUX2, not used. Changed #define LCD_PINS_D4 P0_14 // EXP1.5 to #define LCD_PINS_D4 P0_15 // EXP1.5, wrong in MKS's pinout schematic. Swapped TEMP_BED_PIN and TEMP_0_PIN port's, request from user, more logical... * Update pins_MKS_SBASE.h Moved MUX signals to J8 and re added MUX2, cleaner wiring..	2017-11-02 13:50:23 -05:00
Scott Lahteine	f7133e53fd	Fix case light off Addressing #8205	2017-11-01 21:22:15 -05:00
Scott Lahteine	0108d5181f	Allow asterisks in G-Code commands Addressing #6655	2017-10-31 21:20:41 -05:00
Scott Lahteine	34745b2183	Organize boards.h by architecture	2017-10-31 16:10:38 -05:00
android444	9cc1d8e312	[2.0.x] Support for SilverGate Board	2017-10-31 15:27:26 -05:00
Scott Lahteine	03e5369411	Faster menu navigation for Anet A8 Addressing #8166	2017-10-31 14:46:55 -05:00
Scott Lahteine	f1edf83720	Merge pull request #8187 from rafaljot/patch-5 Update InterruptVectors_Due.cpp	2017-10-31 14:14:08 -05:00
Scott Lahteine	b2bd77c40a	Merge pull request #8191 from thinkyhead/bf2_rearm_more [2.0.x] Add SDCARD_SORT_ALPHA options for LPC1768	2017-10-31 14:12:14 -05:00
Scott Lahteine	571ced712d	Add SDCARD_SORT_ALPHA options for LPC1768	2017-10-31 14:05:40 -05:00
rafaljot	778e4e4c23	Update InterruptVectors_Due.cpp const pfnISR_Handler *isrtab = get_relocated_table_addr(); What compiler do you use? Arduino 1.8.5 can't compile this "const".	2017-10-31 15:00:06 +01:00
Scott Lahteine	cae8703e0d	Merge pull request #8181 from thinkyhead/bf2_fix_bootscreen_repeat [2.0.x] Only show custom bootscreen once	2017-10-31 02:37:40 -05:00
Scott Lahteine	a516856df9	Only show custom bootscreen once	2017-10-31 01:47:30 -05:00
GMagician	727a403ba1	[2.0.x] Fix NO_MOTION_BEFORE_HOMING unwanted behaviour (#8176 ) * [2.0.x] Fix NO_MOTION_BEFORE_HOMING unwanted behaviour NO_MOTION_BEFORE_HOMING should prevent XYZ movements only when homing is not done. E axes should be allowed * Update G0_G1.cpp * Update G0_G1.cpp	2017-10-30 22:50:22 -05:00
Alexey Shvetsov	577659cacf	Basic support for Azteeg_X5_GT (#8139 ) * Basic support for Azteeg_X5_GT Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org> * Add fan pins for AZTEEG X5 GT Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org> * Fix endstop pins * Add servo0 pin	2017-10-30 16:01:20 -05:00
Scott Lahteine	0b02f9cc33	Merge pull request #8168 from thinkyhead/bf2_config_tweak [2.0.x] Apply Re-ARM SPI review items	2017-10-30 15:49:50 -05:00
Scott Lahteine	04c0d9f3c3	Implement kinematic software endstops	2017-10-30 15:16:30 -05:00
Scott Lahteine	9f89b5d876	Fix for MAX_VFAT_ENTRIES sanity check	2017-10-30 15:11:47 -05:00
Scott Lahteine	2cdde08339	Apply items specified in code review Followup to #8122	2017-10-30 15:03:07 -05:00
Scott Lahteine	34be5d33c0	The plural of 'axis' is 'axes'	2017-10-30 14:21:43 -05:00
Bob-the-Kuhn	6e5f13a5c2	Merge pull request #8122 from Bob-the-Kuhn/2.0.x-restore-Re-ARM-RepRap-Discount-Full-Graphics-fix-(partial-solution) 2.0.x - Restore fix for garbaged display on Re-ARM with RepRap Full Graphics Smart Controller	2017-10-30 13:16:16 -05:00
Bob-the-Kuhn	b7a66742dd	tested add sort alpha section to other LPC1768 boards	2017-10-30 13:01:19 -05:00
Jeffrey Li	bbc2e66634	Fix AZSMZ MINI pins for new LPC1768 pinmapping	2017-10-30 04:19:06 -07:00
Scott Lahteine	31e96935f7	Fix EXTRA_FAN_SPEED Addressing #8158	2017-10-30 00:10:00 -05:00
Scott Lahteine	c94dce6b32	Merge pull request #8113 from thinkyhead/bf2_fixup_sd_reprint [2.0.x] Cleanup after SD Print Again, whitespace, tabs	2017-10-29 23:57:51 -05:00
Scott Lahteine	ce1c9c0808	Tweak QUICK_HOME description	2017-10-29 23:48:13 -05:00
Scott Lahteine	12458cefc4	Remove 5s timer hack. Encoder pos is saved on print start!	2017-10-29 22:45:19 -05:00
Scott Lahteine	9a4cf11835	Remove return_to_status_ms hack, just use defer...	2017-10-29 22:45:18 -05:00
Scott Lahteine	8949c8c0a5	Move SD_REPRINT_LAST_SELECTED_FILE to ultralcd.cpp	2017-10-29 22:45:18 -05:00
Scott Lahteine	817175613a	Merge pull request #8157 from thinkyhead/bf2_anet_10_servo [2.0.x] Define a default SERVO0_PIN for Anet 1.0	2017-10-29 19:55:00 -05:00
Scott Lahteine	723f2a77f6	Implement support for Dual X and Y endstops	2017-10-29 18:56:04 -05:00
Scott Lahteine	e04425281d	Add Dual Steppers / Endstops to configs	2017-10-29 18:56:04 -05:00
Scott Lahteine	edff2c917b	Cleanup for DIGIPOTS settings	2017-10-29 18:56:03 -05:00
Scott Lahteine	3e8754a38a	Add/correct time units on planner vars / M205 B	2017-10-29 18:47:21 -05:00
Scott Lahteine	b2a48f1a04	Provide a SERVO0_PIN for non-standard LCD	2017-10-29 18:36:16 -05:00
Scott Lahteine	b232f39341	AVR: Hidden option to use 8s watchdog	2017-10-29 18:36:16 -05:00
Scott Lahteine	9d4cfd2013	Merge pull request #8142 from thinkyhead/bf2_fix_m303 [2.0.x] Fix M303 thermal protection	2017-10-29 04:46:34 -05:00
Scott Lahteine	eae0aea1e0	Fix M303 thermal protection	2017-10-29 04:30:50 -05:00
Luc Van Daele	a1a4fc277e	(2.0.x) serious bug G33 (#8136 ) * (2.0.x) serious bug G33 * Revert config changes This reverts commit `74b5a98223`.	2017-10-29 04:12:33 -05:00
Thomas Moore	325233b454	Fix automatic stepper assignment for X/Y/Z dual stepper drivers (#8130 )	2017-10-28 19:45:07 -05:00
Thomas Moore	50b4f9cbf7	LPC1768 Pin Mapping and M43 cleanup (#8119 ) * LPC1768 M43 cleanup * Update pinmapping.h to #define pins	2017-10-28 19:44:54 -05:00
Scott Lahteine	6b1d1a818b	Revert default BABYSTEP_MULTIPLICATOR to 1	2017-10-27 19:45:44 -05:00
etagle	ba8dc678f5	Arduino Due XON/XOFF implementation Alos includes emergency parser and configurable TX/RX buffers for Arduino Due.	2017-10-27 03:24:23 -05:00
etagle	8d9c3cc2b7	Add a module for Due SRAM-based Interrupt Vector Table This is the ONLY way to be able to override ISRs stolen by the Arduino Runtime, such as Serial or USB device interrupts. This feature is needed so Arduino modules can be replaced and enhanced.	2017-10-27 03:24:23 -05:00
etagle	c9bbef6380	Cosmetic fix for HAL_AVR/MarlinSerial.cpp Instead of using const char, it is better to use uint8_t	2017-10-27 03:24:23 -05:00
LVD-AC	dcfc2503c2	G33 Autotune calibration update #10	2017-10-27 02:11:24 -05:00
Scott Lahteine	b338cafc65	Merge pull request #8111 from thinkyhead/bf2_fwretract_fix_oct26 [2.0.x] Improved Firmware Retraction logic	2017-10-27 02:02:06 -05:00
Scott Lahteine	ada90f7335	Clean up trailing spaces	2017-10-26 23:33:43 -05:00
Scott Lahteine	7fad26549b	Concise SD_REPRINT_LAST_SELECTED_FILE description	2017-10-26 23:33:02 -05:00
Scott Lahteine	33f379fe88	Add some Polish language Thanks @SCiunczyk	2017-10-26 22:49:04 -05:00
Scott Lahteine	daeff5a11a	Tweak neopixel self-test	2017-10-26 22:47:07 -05:00
Scott Lahteine	0ceec1f166	Fix leveling_active_at_z warning	2017-10-26 22:22:54 -05:00
studiodyne	eb02f8c719	Improve FWRETRACT logic, add common sense	2017-10-26 22:22:54 -05:00
Scott Lahteine	bd78ca0ee3	Add M290 Babystepping	2017-10-26 20:44:43 -05:00
Scott Lahteine	ce5f0ec85a	Bring STM32 example config up to date	2017-10-26 17:25:44 -05:00
Scott Lahteine	46e9eae159	Tweak to M100 config comment	2017-10-26 17:25:44 -05:00
Scott Lahteine	c45514f811	Merge pull request #8094 from thinkyhead/bf2_neopixel_led_parity [2.0.x] Bring NEOPIXEL_LED into parity with 1.1.x	2017-10-26 17:24:38 -05:00
Bob-the-Kuhn	229a27a1c7	save FLASH by using reduced font for some languages	2017-10-26 16:08:17 -05:00
Roxy-3D	3f5f39576b	Reprint option for last SD Memory card file (#8106 ) * Re-Print of same SD Memory Card file with single click * Re-Print of same SD Memory Card file with single click * This is the bugfix-v2.0.0 version of https://github.com/MarlinFirmware/Marlin/pull/8104	2017-10-26 15:50:18 -05:00
Thomas Moore	9e699811d2	Make LPC1768 pinmapping not specific to Re-ARM (#8063 ) * Merging early because of build failures. See #8105 * Make LPC1768 pinmapping not specific to Re-ARM * Add HAL_PIN_TYPE and LPC1768 pin features * M43 Updates * Move pin map into pinsDebug_LPC1768.h * Incorporate comments and M226 * Fix persistent store compilation issues * Update pin features * Update MKS SBASE pins * Use native LPC1768 pin numbers in M42, M43, and M226	2017-10-26 13:37:26 -05:00
Scott Lahteine	3ac581eac9	Neopixel changes for parity with 1.1.x	2017-10-25 18:40:04 -05:00
jeffyl	7b3098bbd5	Add AZSMZ Mini (#8005 ) * Add AZSMZ Mini * Remove tabs, adjust spacing * Renumber boards to group by family * Patch up spacing * Tweak	2017-10-25 01:16:54 -05:00
Scott Lahteine	e00ed10c4c	GT2560 config MKS_MINI_12864 => SDSUPPORT	2017-10-25 01:12:48 -05:00
Scott Lahteine	10a5e4d80f	Merge pull request #8078 from thinkyhead/bf2_mks_mini_lcd [2.0.x] Add MKS MINI 12864 support to GT2560	2017-10-25 01:10:03 -05:00
Scott Lahteine	ee9b8bf0f1	Add MKS MINI 12864 support to GT2560	2017-10-24 19:15:41 -05:00
Scott Lahteine	f65fc7ffab	Merge pull request #8044 from thinkyhead/bf2_mesh_consolidate [2.0.x] Simplify mesh bounds config	2017-10-24 18:56:43 -05:00
Scott Lahteine	070cd34fe8	Merge pull request #8077 from thinkyhead/bf2_MKS_BASE_followup Clean up HAL trailing spaces, MKS SBASE pins	2017-10-24 18:38:48 -05:00
Scott Lahteine	7f55d82fd1	Move UBL_SAVE_ACTIVE_ON_M500 to Configuration.h	2017-10-24 18:26:43 -05:00
Scott Lahteine	90a14b4f5b	Clean up HAL trailing spaces, MKS SBASE pins	2017-10-24 18:20:23 -05:00
Thomas Moore	51fafccc16	[2.0.x] Enable hardware serial ports on LPC1768 (#8004 ) * Enable hardware serial ports on LPC1768 * Fix compilation errors with other HALs * FIx order of includes in LPC1768 HAL main.cpp * Add support for RX_BUFFER_SIZE and TX_BUFFER_SIZE options in Configuration_adv.h	2017-10-24 17:28:33 -05:00
Scott Lahteine	580b6e9089	Apply physical limits to mesh bounds	2017-10-24 16:54:07 -05:00
Scott Lahteine	4e2baeb3e1	Update indentation, file-wrapping for Marlin 2.0.x	2017-10-24 16:54:06 -05:00
Scott Lahteine	60af705e6d	Relocate SPI.h to the HAL folder	2017-10-24 16:54:06 -05:00
Scott Lahteine	46aae4c6e7	Merge pull request #8074 from thinkyhead/bf2_verbiage_like_8061 Fix some config verbiage	2017-10-24 15:25:12 -05:00
Scott Lahteine	3356d5a72d	Merge pull request #8072 from thinkyhead/bf2_fix_M600 [2.0.x] Fix position sync in M600 pause/resume	2017-10-24 14:55:46 -05:00
Scott Lahteine	5f87324536	Fix some config verbiage	2017-10-24 14:53:42 -05:00
Scott Lahteine	272f9f65dc	Fix some typos	2017-10-24 14:29:15 -05:00
studiodyne	8181220bfd	Fix position sync in M600 pause/resume	2017-10-24 14:29:15 -05:00
cdedwards	6296ab2173	Add GFX overlay to UBL mesh edit (#8038 ) * Add GFX overlay to UBL mesh edit Fixed misplaced HAS_TEMP_BED in dogm_bitmaps.h rename _lcd_babystep_zoffset_overlay to _lcd_zoffset_overlay_gfx and move it out of BABYSTEP_ZPROBE_OFFSET to we can use it for over things. Add this function into UBL mesh edit screen. update all Configuration.h to add ENABLE_MESH_EDIT_GFX_OVERLAY * Add Sanity to UBL insanity Need to check for DOGLCD otherwise error out.	2017-10-24 14:14:03 -05:00
Roxy-3D	72156a2029	change to better (more clear) names (#8050 ) set_destination_to_current() changed to set_destination_from_current() set_current_to_destination() changed to set_current_from_destination()	2017-10-21 11:42:26 -05:00
Scott Lahteine	0cb423b5b3	Apply consistency for other configs	2017-10-21 00:41:51 -05:00
Scott Lahteine	8c78f8f790	Add Makeboard MINI for Micromake C1	2017-10-21 00:41:51 -05:00
Scott Lahteine	1fbb307aaf	Merge pull request #8021 from thinkyhead/bf2_scroll_longnames [2.0.x] Add SCROLL_LONG_FILENAMES to reveal longer filenames	2017-10-20 21:33:54 -05:00
Scott Lahteine	3d2b2eb1ca	Prevent SDCARD_SORT_ALPHA from exploding	2017-10-20 19:13:21 -05:00
Scott Lahteine	783ddf9691	Add SCROLL_LONG_FILENAMES option	2017-10-20 19:13:21 -05:00
Roxy-3D	5439358281	Basic UBL operations working on 32-bit platforms (#8024 ) * 32-bit work for UBL * Update FT i3-2020 reference file	2017-10-19 10:44:45 -05:00
Scott Lahteine	9e5cbf0198	BQ should set this in its config, and does	2017-10-18 22:56:03 -05:00
Scott Lahteine	348e5e3109	Simplify Cartesian probing boundaries Followup to #8012	2017-10-18 17:14:32 -05:00
Luc Van Daele	3986a84f77	boolval revisited (#8016 )	2017-10-18 14:03:17 -05:00
Roxy-3D	572cf0ec95	UBL able to generate mesh and save and load it on 32-bit platforms (#8015 ) * Get UBL Mesh Generation, Mesh Save & Mesh Load working with 32-Bit platforms * clean up read_data() and write_data() for non-LPC1768 HAL's * Get read_data() and write_data() return codes consistent All HAL's read_data() and write_data() return false if they succeed. * Get read_data() and write_data() return codes to be consistent Make read_data() and write_data() return true if an error happens. * Say UBL is now checked out on machine types in default Configuration.h file.	2017-10-18 14:00:29 -05:00
Thomas Moore	67cc29cd3c	Update UBL mesh boundaries to accomidate beds centered at 0, 0 (#8012 )	2017-10-18 10:03:30 -05:00
Roxy-3D	6cb26c98c8	Fix Baby Stepping on 32-Bit platforms (#8001 ) Also, Max7219 debug code was used for this effort. It has been improved and hardened.	2017-10-16 16:29:37 -05:00
Scott Lahteine	3b7b0492f8	Merge pull request #7993 from jeffyl/bugfix-2.0.x [2.0.x] Proper support for AZSMZ 12864 LCD on SmartRAMPS	2017-10-16 14:12:29 -05:00
Jeffrey Li	26531f2715	Add lcd to all sample configs	2017-10-16 03:24:25 -07:00
Scott Lahteine	ce48403a0b	Add EXTRA_FAN_SPEED feature Based on #7883 by @studiodyne	2017-10-16 02:34:13 -05:00
Jeffrey Li	eeb4611606	Add proper support for the AZSMZ 12864 LCD on a SMART RAMPS	2017-10-16 00:33:07 -07:00
Scott Lahteine	c46189e429	Fix UBL+Delta segmented feedrate Based on #7948	2017-10-15 16:31:09 -05:00
Scott Lahteine	5c4f3e0107	Add LCD_SET_PROGRESS_MANUALLY	2017-10-15 03:05:29 -05:00
Scott Lahteine	014a83fe09	Merge pull request #7984 from thinkyhead/bf2_micromake_c1 [2.0.x] Micromake C1 Configurations, Unaccented French	2017-10-14 21:19:32 -05:00
Scott Lahteine	bc7df0188e	Add Micromake C1 configurations	2017-10-14 20:28:12 -05:00
Scott Lahteine	34a261416f	Add unaccented French language	2017-10-14 20:28:12 -05:00
Scott Lahteine	e587f0893c	Define AVR_ATmega2560_FAMILY_PLUS_70 in Conditionals	2017-10-14 19:05:32 -05:00
Scott Lahteine	fd128b3c93	Fix some AVR HAL code style	2017-10-14 19:05:10 -05:00
Scott Lahteine	799360c576	Enhance Teensy/RAMPS pins files	2017-10-14 18:44:20 -05:00
Scott Lahteine	d3e5a22a5d	Add MIN_SOFTWARE_ENDSTOP_[XYZ] to example configs	2017-10-14 18:44:20 -05:00
Jeff Eberl	b206f70693	Split the software endstop capability by axis.	2017-10-14 18:44:20 -05:00
Scott Lahteine	ec69e97bda	Merge pull request #7974 from jeffyl/bugfix-2.0.x Fix include path for VIKI	2017-10-14 17:38:42 -05:00
Morten	91e28edda6	[2.0.x] Add new board: MKS Sbase (#7945 ) * Add files via upload * Add files via upload * Add files via upload * Checked LCD / edited / revised pins_MKS_BASE.h As requested :) * Delete Configuration_adv.h * Delete Configuration.h * Deleted /Marlin/Marlin/src/config/examples/MksSbase/. and moved them to /Marlin/Marlin/src/config/examples/Mks/Sbase/. * Add files via upload	2017-10-14 09:44:18 -05:00
Jeffrey Li	3c8a3a02ba	Fix include path for VIKI	2017-10-14 04:06:17 -07:00
Scott Lahteine	4586acad8c	Merge pull request #7959 from alexxy/bugfix-2.0.x Python isnt always python2	2017-10-14 05:02:07 -05:00
Scott Lahteine	497f86453e	Merge pull request #7964 from gallynero/patch-2 fix 'axis_unhomed_error' not defined error	2017-10-14 05:00:58 -05:00
Scott Lahteine	c0dddd4233	Tweaks to tool_change, GcodeSuite::T()	2017-10-14 02:53:19 -05:00
Scott Lahteine	ca66574062	ADC sensor fix inspired by 'Evgen2' on Twitter	2017-10-14 02:28:13 -05:00
Scott Lahteine	1344ca4b2f	UBL no longer needs ubl_state	2017-10-14 02:18:32 -05:00
Scott Lahteine	8dd08425fd	Improve LCD leveling edits	2017-10-14 02:18:31 -05:00
Scott Lahteine	3e3911fb81	Use planner.leveling_active for all leveling systems	2017-10-14 02:18:31 -05:00
Scott Lahteine	32c607ffe2	Ensure fade factor is recalculated if fade height changes	2017-10-14 02:18:31 -05:00
Scott Lahteine	ca1e47375c	Move fade_scaling_factor_for_z to Planner	2017-10-14 02:18:31 -05:00
Scott Lahteine	9a930ebec2	Make leveling_is_active a macro	2017-10-14 02:18:31 -05:00
Scott Lahteine	58abc66c1d	Tweak bed leveling conditionals	2017-10-14 02:18:31 -05:00
Scott Lahteine	1adb5a6a48	Remove obsolete UBL z_offset	2017-10-13 08:22:46 -05:00
gallynero	3619a4cbea	fix 'axis_unhomed_error' not defined error Fix 'axis_unhomed_error' not defined error when pause with unhomed status	2017-10-13 09:08:02 +02:00
Alexey Shvetsov	12d212d1b4	Python isnt always python2 So now this script is compatible with both python versions 2 and 3 Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>	2017-10-13 01:39:06 +03:00
Bob-the-Kuhn	4e3ee845b9	config_adv (#7941 ) get rid of twi.h move to board files	2017-10-11 15:42:24 -05:00
Roxy-3D	0e260c6c1d	Get FolgerTech i3-2020 working again with 32-bit platforms (#7944 ) Setup FolgerTech i3-2020 Configuration files as a reference platform for 32-Bit work. Also fix MAX7219 debug lights on 32-bit platforms.	2017-10-11 15:23:04 -05:00
Bob-the-Kuhn	26bfae58d4	MPC4451 I2C support	2017-10-11 00:30:41 -05:00
Scott Lahteine	1f5c432e29	Merge pull request #7920 from thinkyhead/bf2_neopixel_full [2.0.x] Move FILAMENT_RUNOUT_SENSOR to a feature	2017-10-10 03:05:00 -05:00
Scott Lahteine	732e87e83c	Merge pull request #7892 from GMagician/Serial-double-echo-fix [2.0.x] Serial double echo fix	2017-10-10 02:42:16 -05:00
Scott Lahteine	f8e8fcb978	Move FILAMENT_RUNOUT_SENSOR to a feature	2017-10-10 02:37:42 -05:00
Slawomir Ciunczyk	a11e6a1022	Different NEOPIXEL types Same as #7728 but for 2.0.x, Lot of cleanup and remove references in whole code to other "LED files" than leds.h. Now will be much easier to add next drivers/libraries. e.g. FastLED. But bad news, currently FastLED is suporting only RGB devices (no RGBW)	2017-10-10 02:17:36 -05:00
Scott Lahteine	b30b55307c	Merge pull request #7909 from thinkyhead/bf2_goodbye_legacy_advance [2.0.x] Remove legacy ADVANCE feature	2017-10-10 00:31:18 -05:00
Scott Lahteine	1d04197f2f	Merge pull request #7916 from thinkyhead/bf2_probeless_ubl [2.0.x] Allow UBL G29 and G26 to build without a probe	2017-10-10 00:30:27 -05:00
Thomas Moore	9b0ee53b12	Use segmented moves when moving axis from LCD	2017-10-09 23:25:43 -05:00
Scott Lahteine	442669d23c	Allow UBL to build without a probe	2017-10-09 18:57:41 -05:00
Scott Lahteine	20ebe218c8	Tweaks to VIKI lcd support	2017-10-09 17:01:07 -05:00
Scott Lahteine	09fa34a9e1	Modernize configs	2017-10-09 16:18:10 -05:00
Scott Lahteine	560d366b80	Move VIKI SCK/MOSI pins fix to Conditionals_POST.h	2017-10-09 16:13:49 -05:00
Scott Lahteine	e9bcb9d048	Add 4 new LCD displays	2017-10-09 15:58:02 -05:00
Scott Lahteine	03f4891fb9	Remove legacy ADVANCE feature	2017-10-09 04:25:18 -05:00
GMagician	546f02c6f4	[2.0.x] Addressing #7896 Compiler error, added char c variable	2017-10-08 23:16:35 +02:00
GMagician	eb96d37da0	Serial double echo fix Fix double character sent when TX buffer size is 0 on mega2560	2017-10-07 22:20:00 +02:00
Scott Lahteine	deeea98d22	LCD filename already concatenated	2017-10-07 15:16:05 -05:00
Scott Lahteine	a058638d11	Merge pull request #7875 from thinkyhead/bf2_fill_eeprom_dat_ff [2.0.x] Update LPC persistent store to initialize eeprom.dat with FF	2017-10-07 15:13:21 -05:00
Scott Lahteine	ae1a18d0a1	LCD filename already concatentated	2017-10-07 15:10:15 -05:00
Scott Lahteine	12aa1b999a	Fix display issue with SD_SORT_ALPHA cached names	2017-10-07 15:08:08 -05:00
Dave Johnson	9d0e4ea3d5	[2.0.x] Auto-enable DISABLE_REDUCED_ACCURACY_WARNING if HOME_AFTER_DEACTIVATE enabled (#7879 ) * Auto-enable DISABLE_REDUCED_ACCURACY_WARNING if HOME_AFTER_DEACTIVATE enabled If HOME_AFTER_DEACTIVATE, there is no need to warn on LCD since printer will home prior to starting print. Saves 60 bytes PROGMEM on AVR with U8g panel. * Reduce lines used * Reduce lines used	2017-10-07 15:02:55 -05:00
Scott Lahteine	8315a8a716	Apply fixes for DUE Alternative to #7882. If F_CPU is greater than 1000 it can be evenly divided by 8. Over 10000, 16; over 100000, 32; over 1 million, 64; etc.	2017-10-07 14:31:18 -05:00
Scott Lahteine	4b36a542e0	Merge pull request #7876 from thinkyhead/bf2_hotend_messages [2.0.x] Addressing #7612	2017-10-07 13:37:43 -05:00
Unknown	12730c1303	[2.0.0] Resolve USE_CONTROLLER_FAN compile errors Add to controllerfan.cpp: #include "../module/stepper_indirection.h" #include "../module/temperature.h"	2017-10-07 05:26:36 -07:00
Scott Lahteine	7fb3343bda	[2.0.x] Addressing #7612 Change "extruder" to HOTEND in sanity error messages	2017-10-07 02:27:26 -05:00
victorpv	8998f31ee1	Update LPC persistent store to initialize eeprom.dat with FF This change initialize any data in eeprom.dat beyond the current file size to FF. That way if eeprom.dat is deleted and created again, it doesn't take the old values or random ones, but rather starts with FF in all positions as a real brand new or erased eeprom.dat Currently if you delete eeprom.dat and restart the board, the new file is created in the same sector with the same content, since FAT does not actually delete the data, just marks the sector as free. I tested by deleting the file, and then rebooting the board, and checking the file content. The change can be tested in the same way, deleting, rebooting the board, and then the new content should be all FF. If an eeprom file already exist with data on it, but smaller than E2END, it will be padded with FF on first access, so it will not have random or old content appended.	2017-10-07 02:18:42 -05:00
Scott Lahteine	2aa22c5a5e	Merge pull request #7874 from thinkyhead/bf2_anet_encoder_pulses [2.0.x] Fixing ANET encoder pulses	2017-10-07 01:21:23 -05:00
Scott Lahteine	f99d1dedae	Fixing #7833 Derived from #7873	2017-10-07 00:10:05 -05:00
Scott Lahteine	de84f57a9c	Patch SD file draw bug	2017-10-06 23:57:11 -05:00
Scott Lahteine	ef90b49fff	Remove extra NEWPANEL settings in Conditionals_LCD.h	2017-10-06 23:56:58 -05:00
Scott Lahteine	67a7dd9792	Merge pull request #7866 from thinkyhead/bf2_finally_G33_is_done [2.0.x] Apply G33 updates	2017-10-06 16:03:26 -05:00
Scott Lahteine	b220bc7521	Apply G33 updates Adapted from #7865	2017-10-06 15:47:51 -05:00
Scott Lahteine	9fe7f53216	Misc general spacing cleanup	2017-10-06 15:14:01 -05:00
Scott Lahteine	c0382cd8cd	Add UTF-8 mapper for Slovak language Based on #7862, #7846 by @rmoravcik	2017-10-06 15:14:01 -05:00
Scott Lahteine	c81843a414	Set TEMP_SENSOR_0 to 1 in CR-10 example config As pointed out in #7692 by @totalitarian	2017-10-06 14:30:53 -05:00
android444	72693a7e87	[2.0.x] Fixed RAMPS FD V1 pins.h file (#7852 ) * test only test * Fixed RAMPS FD V1 pins.h file * Fix typo	2017-10-06 13:27:15 -05:00
Chris Pepper	aa51a02b8f	LPC1768: fix serial buffer underrun (#7854 ) When the buffer is empty index_write == index_read, but they needed constrained by buffer_mask	2017-10-05 17:19:43 -05:00
Chris Pepper	46b2773e13	General fixes for LPC1768 (#7834 ) * fixed some include paths * LPC1768: Fix Serial API Add missing serial methods used if TX_BUFFER_SIZE is set Change return value of HalSerial:read to match Arduino API * LPC1768: add filters to ADC This is to try and compensate for hardware issue and oversensitivity to noise * LPC1768: remove the polling section of delayMicroseconds * LPC1768: lock usb mass storage device while device accesses it. Currently only applicable to persistent store, The device always has priority and will unmount the sd card from the host, Windows then tries to automount again so it can look like the explorer window freezes. Linux Mint, by default, just closes the Nemo window. * Add timeout to make sure if Serial never connects that Marlin still boots * Remove unneeded ifdef CPU_32_BIT In general the need for ifdef CPU_32_BIT blocks means that something is missing from the HAL API or a Platform, in this case HAL_TICKS_PER_US was missing from the AVR Platform * LPC1768: relocate RE-ARM debug_extra_script.py	2017-10-04 15:40:54 -05:00
Scott Lahteine	7258218f89	Fix xon_xoff_state initialization	2017-10-04 12:11:56 -05:00
Scott Lahteine	bf596fb039	Merge pull request #7818 from thinkyhead/bf2_xon_xoff [2.0.x] Add XON/XOFF serial handshaking	2017-10-02 23:52:30 -05:00
Scott Lahteine	ca3c9baf1b	Fix DUAL_X_CARRIAGE manual moves, add T0/T1 menu item	2017-10-02 23:35:55 -05:00
Scott Lahteine	a8b8d4e85e	Add a typedef for MENU_ITEM(function,…) functions	2017-10-02 23:33:57 -05:00
Scott Lahteine	6ea2cc0293	Make prepare_move_to_destination_dualx a proper move function	2017-10-02 23:32:28 -05:00
Scott Lahteine	e472a7569b	Remove extra auto_current_control call	2017-10-02 23:32:05 -05:00
Scott Lahteine	508d764d63	Add serial XON/XOFF handshaking From @ejtagle, originally #7459	2017-10-02 04:12:30 -05:00
Scott Lahteine	af15383578	Add XON/XOFF options to example configs	2017-10-02 04:05:49 -05:00
Scott Lahteine	33c4d45f2f	Merge pull request #7812 from thinkyhead/bf2_fix_resume_print [2.0.x] Fix broken M600 resume_print	2017-10-01 22:55:28 -05:00
Scott Lahteine	a03e70d46c	Fix M600 resume_print Derived from #7811 and #7779	2017-10-01 21:59:42 -05:00
Scott Lahteine	2d41c59320	Tweak some spacing	2017-10-01 21:59:42 -05:00
Scott Lahteine	5ae390e240	Apply NO_MOTION_BEFORE_HOMING to examples	2017-10-01 21:58:50 -05:00
Scott Lahteine	90af1fe5ee	Implement NO_MOTION_BEFORE_HOMING option	2017-10-01 21:58:50 -05:00
Scott Lahteine	965b0ab53e	Spacing adjustments	2017-10-01 21:58:50 -05:00
Scott Lahteine	ac41eb5871	Merge pull request #7722 from tcm0116/2.0.x-warnings Cleanup 2.0.x compiler warnings	2017-10-01 21:56:54 -05:00
Thomas Moore	ae2173cd52	Synchronize retractions	2017-09-30 17:28:46 -05:00
Thomas Moore	0cb00f52d9	Cleanup warnings	2017-09-30 16:47:17 -05:00
Bob-the-Kuhn	1beaef0452	fix 3S hang & enable SPLIT	2017-09-30 10:27:41 -05:00
Thomas Moore	020ce176c4	Fix Servo class compile errors	2017-09-29 08:17:30 -05:00
Bob-the-Kuhn	62054af6eb	2.0 compile issues	2017-09-28 10:16:25 -05:00
Christopher Pepper	bea3ec2724	M355 S0, S1 fixes & faster LCD, SD card fix Travis error	2017-09-27 19:26:00 -05:00
Scott Lahteine	8c622a59cf	Merge pull request #7774 from thinkyhead/bf2_lcd_leveling_status [2.0.x] Show leveling status on character LCD	2017-09-27 13:10:25 -05:00
Scott Lahteine	56c05a7015	Show leveling status on character LCD	2017-09-27 12:21:15 -05:00
Scott Lahteine	2ee4eef25c	Merge pull request #7748 from GMagician/Addressing-#7730 [bugfix-2.0.x] Fix compiler error (issue #7730)	2017-09-27 12:06:55 -05:00
Scott Lahteine	ffed785656	Merge pull request #7768 from thinkyhead/bf2_HAL_STM32F1 [2.0.x] HAL for STM32F1	2017-09-27 11:52:34 -05:00
Scott Lahteine	604b804125	Add confirmation step to Init EEPROM	2017-09-27 11:31:38 -05:00
Tannoo	c869dc9745	User script return-to-status option	2017-09-27 11:31:38 -05:00
victorpv	e9acb63290	STM32F1 HAL Adding files for STM32F1 HAL based on libmaple/stm32duino core. Current persistent_store uses cardreader changes to be sent in separate commit, but could be changed to use i2c eeprom.	2017-09-27 11:20:10 -05:00
Scott Lahteine	c2b1d51f16	HAL whitespace and style cleanup	2017-09-27 10:55:36 -05:00
Scott Lahteine	c272f2c84e	Cleanup pins spacing	2017-09-27 10:55:36 -05:00
Scott Lahteine	dff2904c0f	Marlin code whitespace cleanup	2017-09-27 10:55:36 -05:00
Scott Lahteine	599f2ad983	Define pin accessors more like <Arduino.h>	2017-09-27 10:41:27 -05:00
Scott Lahteine	358656acc3	Tweak HAL_adc_start_conversion	2017-09-27 10:41:27 -05:00
Scott Lahteine	0cb4d25431	Tweaks to Servo classes	2017-09-27 10:41:27 -05:00
Phr3d13	10c1b442ca	Fixes for Anet10 and gt2560 Fixes for 2 "... not declared in this scope" compiler errors.	2017-09-27 07:34:02 -05:00
Phr3d13	5a3a53379f	Update pins for GT2560_Rev_A_Plus For PR #7738	2017-09-27 06:34:51 -05:00
Scott Lahteine	fdf1b8a7b8	Fix sanity check for LCD_FOR_MELZI Comes from #7760	2017-09-27 03:04:19 -05:00
Scott Lahteine	b93a55e15f	Fix ST7920_DELAY_2 potentially being unset Comes from #7760	2017-09-27 03:04:01 -05:00
Scott Lahteine	ce1638e32f	Add Babystep Z graphic overlay See PR #7593	2017-09-27 01:25:05 -05:00
Scott Lahteine	49c693c85b	Tweak to serial macros	2017-09-27 01:25:05 -05:00
Scott Lahteine	46709ed7e0	More featureful CR-10 configurations See #7725	2017-09-27 01:25:05 -05:00
Scott Lahteine	2b112143fa	Update Sanguinololu config version	2017-09-27 00:48:59 -05:00
Scott Lahteine	7cd5eb6d42	Update LEVEL_BED_CORNERS config option	2017-09-27 00:48:59 -05:00
Scott Lahteine	981a610f75	Disable BABYSTEP_XY, add to SDSORT comment	2017-09-27 00:48:59 -05:00
Scott Lahteine	4c5be9bb05	Fix a PARKING_EXTRUDER comment	2017-09-27 00:48:58 -05:00
Scott Lahteine	494b0eba2d	Config spacing fix	2017-09-27 00:48:47 -05:00
Scott Lahteine	2281154025	Increase BABYSTEP_MULTIPLICATOR to 100	2017-09-27 00:48:46 -05:00
Scott Lahteine	92dbf5f148	Fix babystep edit label, allowing translation	2017-09-26 23:43:05 -05:00
Scott Lahteine	37eb6d1732	Babystepping code tweak	2017-09-26 23:43:05 -05:00
Scott Lahteine	7a29f802d0	Fix ENCODER_PULSES_PER_STEP for G3D_PANEL	2017-09-26 23:43:05 -05:00
Scott Lahteine	5972251b17	No need for unused LCD_PINS_Dn	2017-09-26 23:27:53 -05:00
GMagician	c508e9adec	Fix compiler error Added missing include file, called 'leveling_is_active()' with no prototipe defined.	2017-09-25 23:18:26 +02:00
Scott Lahteine	c4e4a0688c	Fix bug in SD Autostart As pointed out by @marcio-ao in #7638	2017-09-24 17:53:39 -05:00
Scott Lahteine	6d5fcac54a	G33 changes from 1.1.x	2017-09-24 14:16:23 -05:00
Dave Johnson	f58ba3a64e	Improve AVR arch detection Replace ARDUINO_ARCH_AVR with __AVR__ to better detect architecture for non-Arduino dev environments. Resolves compile failure in PIO for 8-bit Teensduino targets More info: https://forum.pjrc.com/threads/33234-Using-Teensyduino-Selecting-Teensy-3-2-3-1-board-has-incorrect-platform-define http://www.atmel.com/webdoc/avrlibcreferencemanual/using_tools_1using_avr_gcc_mach_opt.html	2017-09-23 21:36:40 -07:00
Scott Lahteine	71d63fcafb	Apply LCD changes from 1.1.x Changes from #7720	2017-09-23 21:50:44 -05:00
Scott Lahteine	1587962547	Combine G-code files into fewer units Addressing #7707	2017-09-23 18:12:04 -05:00
Scott Lahteine	bfd1e75c04	Patch for caselight + lcd compile issues	2017-09-23 18:12:04 -05:00
Scott Lahteine	ff1f211eb4	Merge pull request #7695 from tcm0116/move_framework Move LPC1768 framework out of Marlin source folder	2017-09-23 17:12:48 -05:00
Thomas Moore	ddbd4b73e0	Move LPC1768 framework out of Marlin source folder	2017-09-23 16:59:31 -05:00
GMagician	00b1b33816	Fix compiler warning	2017-09-23 15:31:51 +02:00
Scott Lahteine	f37ed314e0	Friendly layout for Arduino IDE	2017-09-21 16:27:13 -05:00
Scott Lahteine	06a02dd200	Workaround for SCK/MOSI pins on VIKI	2017-09-21 16:27:12 -05:00
Scott Lahteine	f9ef446fb5	Clean up after refactor	2017-09-21 16:27:12 -05:00
Scott Lahteine	64dfb46461	Move z_endstop_adj to Endstops	2017-09-21 16:27:11 -05:00
Scott Lahteine	2e20c53c9d	Move endstop debug to Endstops	2017-09-21 16:27:11 -05:00
Scott Lahteine	a10451ceed	Move Volumetric methods to Planner	2017-09-21 16:27:11 -05:00
Scott Lahteine	6f92ab7eed	Move Controller Fan to feature	2017-09-21 16:27:11 -05:00
Scott Lahteine	07cf75883f	Move T (tool change) to cpp	2017-09-21 16:27:10 -05:00
Scott Lahteine	927524af6b	Move M999 to cpp	2017-09-21 16:27:10 -05:00
Scott Lahteine	1a37ebc76d	Move M163-M165 MIXING_EXTRUDER to cpp	2017-09-21 16:27:10 -05:00
Scott Lahteine	8ca0b2fd68	Move M355 caselight to cpp	2017-09-21 16:27:09 -05:00
Scott Lahteine	59608086e6	Move M350_M351 to cpp	2017-09-21 16:27:09 -05:00
Scott Lahteine	6e0503eab2	Move M907-M910 to cpp	2017-09-21 16:27:09 -05:00
Scott Lahteine	2e89685154	Move TMC2130 g-codes to cpp	2017-09-21 16:27:09 -05:00
Scott Lahteine	19dde5be03	Move M900 to cpp	2017-09-21 16:27:08 -05:00
Scott Lahteine	1b0acbff72	Move M605 to cpp	2017-09-21 16:27:08 -05:00
Scott Lahteine	75cf17d816	Move M702 MK2_MULTIPLEXER to cpp	2017-09-21 16:27:08 -05:00
Scott Lahteine	7ba2ab4fb3	Move M540 to cpp	2017-09-21 16:27:07 -05:00
Scott Lahteine	a90c7dbf64	Move M500-M503 to cpp	2017-09-21 16:27:07 -05:00
Scott Lahteine	aab5489962	Move M428 to cpp	2017-09-21 16:27:07 -05:00
Scott Lahteine	1fe25271e4	Move M401_M402 to cpp	2017-09-21 16:27:07 -05:00
Scott Lahteine	0589884d26	Move M400 to cpp	2017-09-21 16:27:06 -05:00
Scott Lahteine	4a220a8b79	Move M380_M381 to cpp, solenoid feature	2017-09-21 16:27:06 -05:00
Scott Lahteine	9be8cb0ac9	Move M360-M364 to cpp	2017-09-21 16:27:06 -05:00
Scott Lahteine	828405cac8	Move M302 to cpp	2017-09-21 16:27:06 -05:00
Scott Lahteine	8584f7e390	Move M250 to cpp	2017-09-21 16:27:05 -05:00
Scott Lahteine	ebb9bd5419	Move M240 to cpp	2017-09-21 16:27:05 -05:00
Scott Lahteine	d4aaa0f1c8	Move M304 to cpp	2017-09-21 16:27:05 -05:00
Scott Lahteine	609c4eea32	Move M301 to cpp	2017-09-21 16:27:04 -05:00
Scott Lahteine	4f14849675	Move M300 to cpp	2017-09-21 16:27:04 -05:00
Scott Lahteine	6ed5252884	Move M280 to cpp	2017-09-21 16:27:04 -05:00
Scott Lahteine	d4d3d92f8a	Move M260_M261 to cpp	2017-09-21 16:27:04 -05:00
Scott Lahteine	3e761696a0	Move M226 to cpp	2017-09-21 16:27:03 -05:00
Scott Lahteine	0e319104c2	Move M220 to cpp	2017-09-21 16:27:03 -05:00
Scott Lahteine	234de3547c	Move M211 to cpp	2017-09-21 16:27:03 -05:00
Scott Lahteine	6c7bad8bc3	Move M666 to cpp	2017-09-21 16:27:03 -05:00
Scott Lahteine	f5877aa93e	Move M665 to cpp	2017-09-21 16:27:02 -05:00
Scott Lahteine	33861d4e04	Move M206 to cpp	2017-09-21 16:27:02 -05:00
Scott Lahteine	7aca9fe2f7	Move M203-M205 to cpp	2017-09-21 16:27:02 -05:00
Scott Lahteine	b3822b9242	M202 is unused	2017-09-21 16:27:02 -05:00
Scott Lahteine	5e63efc1d9	Move M201 to cpp	2017-09-21 16:27:01 -05:00
Scott Lahteine	92c15f5578	Move M150 to cpp	2017-09-21 16:27:01 -05:00
Scott Lahteine	eef4a54778	Move M119-M121 to cpp	2017-09-21 16:27:01 -05:00
Scott Lahteine	379f16558e	Move M118 to cpp	2017-09-21 16:27:00 -05:00
Scott Lahteine	811c32b85a	Move M117 to cpp	2017-09-21 16:27:00 -05:00
Scott Lahteine	1d2061c935	Move M115 to cpp	2017-09-21 16:27:00 -05:00
Scott Lahteine	81b8fbf4d6	Move M114 to cpp	2017-09-21 16:27:00 -05:00
Scott Lahteine	5d2681a105	Move M100 to cpp	2017-09-21 16:26:59 -05:00
Scott Lahteine	beb346e49f	Move M92 to cpp	2017-09-21 16:26:59 -05:00
Scott Lahteine	381b17e6a9	Move M18_M84, M85 to cpp	2017-09-21 16:26:59 -05:00
Scott Lahteine	a911215b0e	Move M82_M83 to cpp	2017-09-21 16:26:59 -05:00
Scott Lahteine	4b9d1b9f26	Move M80-M81 to cpp	2017-09-21 16:26:58 -05:00
Scott Lahteine	0c7ba52451	Move M149 to cpp	2017-09-21 16:26:58 -05:00
Scott Lahteine	cbf40f7ee9	Move M145 to cpp	2017-09-21 16:26:58 -05:00
Scott Lahteine	b464887ea1	Make BARICUDA a feature	2017-09-21 16:26:57 -05:00
Scott Lahteine	14a5d2a273	Move M113 to cpp	2017-09-21 16:26:57 -05:00
Scott Lahteine	06f3c8029e	Move M111 to cpp	2017-09-21 16:26:57 -05:00
Scott Lahteine	a831977dee	Move M110 to cpp	2017-09-21 16:26:57 -05:00
Scott Lahteine	7479ff98b7	Move M140, M190 to cpp	2017-09-21 16:26:56 -05:00
Scott Lahteine	5b3e49babd	Move M108, M112, M410 to cpp	2017-09-21 16:26:56 -05:00
Scott Lahteine	df0432c7c8	Move M155 to cpp, auto-report to Temperature	2017-09-21 16:26:56 -05:00
Scott Lahteine	df031ab100	Move M106_M107 to cpp	2017-09-21 16:26:56 -05:00
Scott Lahteine	99c4b9050a	Move M105 to cpp	2017-09-21 16:26:55 -05:00
Scott Lahteine	a41130f854	Temp stat LEDs	2017-09-21 16:26:55 -05:00
Scott Lahteine	2c1eda9e00	Move M75-M78 to cpp	2017-09-21 16:26:55 -05:00
Scott Lahteine	fc52fc72ac	Move M48 to cpp	2017-09-21 16:26:54 -05:00
Scott Lahteine	be8d913484	Move M43 to cpp	2017-09-21 16:26:54 -05:00
Scott Lahteine	10fab24e50	Move M42 to cpp	2017-09-21 16:26:54 -05:00
Scott Lahteine	69b664b6fe	Move M31 to cpp	2017-09-21 16:26:54 -05:00
Scott Lahteine	a442c34a1a	Move SD commands to cpp	2017-09-21 16:26:53 -05:00
Scott Lahteine	be0e4a4ad0	Consolidate pause, apply to M125, M600, M24	2017-09-21 16:26:53 -05:00
Scott Lahteine	adca4a9b79	Move M17 to cpp	2017-09-21 16:26:53 -05:00
Scott Lahteine	33e00b6cd6	Move M3-M5 to cpp	2017-09-21 16:26:53 -05:00
Scott Lahteine	04583d46af	Move M0_M1 to cpp	2017-09-21 16:26:52 -05:00
Scott Lahteine	04376975ce	Move G92 to cpp	2017-09-21 16:26:52 -05:00
Scott Lahteine	931aa79d85	Move G42 to cpp	2017-09-21 16:26:52 -05:00
Scott Lahteine	84ddae56a8	Move G38 to cpp	2017-09-21 16:26:51 -05:00
Scott Lahteine	b8adae0785	Move G31_G32 to cpp	2017-09-21 16:26:51 -05:00
Scott Lahteine	9db5d21837	Move G30 to cpp	2017-09-21 16:26:51 -05:00
Scott Lahteine	13136376ee	Move G27 to cpp	2017-09-21 16:26:51 -05:00
Scott Lahteine	a1ee1628e5	Move G20_G21 to cpp	2017-09-21 16:26:50 -05:00
Scott Lahteine	9b4aa5ea8b	Move G17-G19 to cpp	2017-09-21 16:26:50 -05:00
Scott Lahteine	94d9def81c	Move G12 to cpp	2017-09-21 16:26:50 -05:00
Scott Lahteine	56f4a43535	Move G5 to cpp	2017-09-21 16:26:50 -05:00
Scott Lahteine	760f29a88e	Move G4 to cpp	2017-09-21 16:26:49 -05:00
Scott Lahteine	4007cbfe9e	Move G2_G3 to cpp	2017-09-21 16:26:49 -05:00
Scott Lahteine	27f7e3fe6f	Hide problem pins in pin debug list	2017-09-21 16:26:49 -05:00
Scott Lahteine	9c21191f74	Rename SPI class to avoid conflict (good?)	2017-09-21 16:26:49 -05:00
Scott Lahteine	51f195e698	Move dwell to gcode	2017-09-21 16:26:48 -05:00
Scott Lahteine	4f1eadf41f	FILAMENT_WIDTH_SENSOR feature	2017-09-21 16:26:48 -05:00
Scott Lahteine	d5fe0fb02b	Consolidate PrintCounter	2017-09-21 16:26:48 -05:00
Scott Lahteine	551752eac7	Consolidate "bedlevel" code	2017-09-21 16:26:47 -05:00
Scott Lahteine	71aefc2e22	Move heater output to Temperature class	2017-09-21 16:26:47 -05:00
Scott Lahteine	63228fc453	Move volumetric flag to GCodeParser	2017-09-21 16:26:47 -05:00
Scott Lahteine	bf7af95db3	Move flow_percentage to Planner	2017-09-21 16:26:46 -05:00
Scott Lahteine	8dc2838d98	Move host keepalive to GcodeSuite	2017-09-21 16:26:46 -05:00
Scott Lahteine	8fbb833de9	Encapsulate RGB(W) LEDs	2017-09-21 16:26:46 -05:00
Scott Lahteine	a98e9874db	FWRETRACT as a feature	2017-09-21 16:26:46 -05:00
Scott Lahteine	722786966a	Add gcode.cpp, motion., queue. - Apply to some G-codes.	2017-09-21 16:26:45 -05:00
Scott Lahteine	4231faf779	Initial split-up of G-code handlers by category	2017-09-21 16:26:45 -05:00
Scott Lahteine	e0a189a481	Consolidate Buzzer	2017-09-21 16:26:45 -05:00
Scott Lahteine	bca67a5b79	Main controller updates	2017-09-21 16:26:44 -05:00
Scott Lahteine	142d8aae56	Move debugging to serial.*	2017-09-21 16:26:44 -05:00
Scott Lahteine	a1e2b5da70	Fix LCD_PINS_Dn tests in pinsDebug_list.h	2017-09-21 16:26:44 -05:00
Scott Lahteine	038f82cc38	Fix L6470 init and options	2017-09-21 16:26:43 -05:00
Scott Lahteine	42e2dd9251	Build file updates	2017-09-21 16:26:43 -05:00
Scott Lahteine	614a86a380	SD file updates	2017-09-21 16:26:43 -05:00
Scott Lahteine	82fff87e16	Pins updates	2017-09-21 16:26:43 -05:00
Scott Lahteine	3d8a0ab4b2	Module updates	2017-09-21 16:26:42 -05:00
Scott Lahteine	0fcec02db5	LCD updates	2017-09-21 16:26:42 -05:00
Scott Lahteine	7dd0a46732	Language updates	2017-09-21 16:26:41 -05:00
Scott Lahteine	4a82e95c3e	Feature file updates	2017-09-21 16:26:41 -05:00
Scott Lahteine	d7ee81202f	Libs updates	2017-09-21 16:26:41 -05:00
Scott Lahteine	34101224c4	Inc updates	2017-09-21 16:26:41 -05:00
Scott Lahteine	f52a31a275	Core updates	2017-09-21 16:26:40 -05:00
Scott Lahteine	479652073b	Config updates	2017-09-21 15:52:17 -05:00
Scott Lahteine	54326fb06a	HAL updates	2017-09-21 15:52:17 -05:00
Scott Lahteine	7e42c7563c	Move build files into place	2017-09-12 14:51:06 -05:00
Scott Lahteine	b66d65f865	Move 'sd' files	2017-09-12 14:51:05 -05:00
Scott Lahteine	0b9a88d6ce	Move 'pins' files	2017-09-12 14:51:05 -05:00
Scott Lahteine	2b3b7d5d7f	Move 'thermistor' files	2017-09-12 14:51:05 -05:00
Scott Lahteine	0c9231fd04	Move 'module' files	2017-09-12 14:51:05 -05:00
Scott Lahteine	efa578d6b0	Move 'libs' files	2017-09-12 14:51:04 -05:00
Scott Lahteine	cc92e544a5	Move 'lcd' files	2017-09-12 14:51:04 -05:00
Scott Lahteine	5be07b5db2	Move 'inc' files	2017-09-07 07:42:55 -05:00
Scott Lahteine	9ea2ff950a	Move 'gcode' files	2017-09-07 07:42:55 -05:00
Scott Lahteine	4e4d16c92e	Move 'core' files	2017-09-07 07:42:55 -05:00
Scott Lahteine	fa5f9c2aec	Move 'feature' files	2017-09-07 07:42:54 -05:00
Scott Lahteine	f536c4dccb	Move configs	2017-09-06 06:28:30 -05:00
Scott Lahteine	48351fd6d5	Move root sources	2017-09-06 06:28:29 -05:00
Scott Lahteine	27cbb939b2	Clean up some HAL code	2017-08-31 18:36:53 -05:00
Christopher Pepper	8afe13b1a2	Fix compile issue when watchdog was disabled	2017-08-31 18:33:07 -05:00
Christopher Pepper	b908e38d08	Add needed platform defined gaurds to compile with Arduino IDE Also removed explicit platform HAL directory inclusion from platformio.ini to make sure these errors are caught by Travis in the future	2017-08-31 18:33:07 -05:00
Scott Lahteine	2af62a5d8d	Apply spacing, const to some HAL code	2017-08-31 18:33:07 -05:00
kfazz	18f97c4013	add HardwareSerial and SoftwareSerial for Re-ARM. HardwareSerial has been tested on Uart0 (debug header) and Uart3 (i2c connector) Software Serial has been tested to work bi-directionally at 9600 and 115200 using pins 6 and 63 on J5, and unidirectionally (write only) at 250000. The code used to test was Teemuatlut's tmc2208 patch, and a few small changes to main used to echo recieved chars back to a host pc.	2017-08-31 18:33:07 -05:00
Bob-the-Kuhn	01fb45b4f8	hybrid PWM system Uses PWM1 to directly control pins 4, 6 & 11 (servo 0, 1 & 3) and PWM1 generated interrupts to control other pins. Interupt control of the servo pins had too much jitter so switched all that we could to PWM1 direct control. The PWM1 direct control pins have less than 1 microsecond pulse width jitter while the interrupt controlled ones can have 20+ microseconds of jitter. Also added insurance to the servo code in the "disable servo after move" section.	2017-08-31 18:33:07 -05:00
Tannoo	94dd39b3b7	LCD_UBL_memory_slot_corrections (#7516 ) * LCD_UBL_memory_slot_corrections Changed the memory slot edit function to work with the `settings.calc_num_meshes()` * Add a little more safety margin... * More corrections Error handling when the EEPROM is not available.	2017-08-31 18:33:07 -05:00
Bob-the-Kuhn	97444391e0	Servo & PWM support for LPC1768 (#7500 )	2017-08-31 18:31:43 -05:00
Tannoo	859fa35287	Re-Arm bugfixes (#7495 ) * UBL_correction * RGB Map function	2017-08-31 18:31:43 -05:00
Bob-the-Kuhn	d80877d570	Set pinMode with every digitalWrite (legacy compatibility)	2017-08-31 18:31:07 -05:00
Chris Pepper	9a950e3a5a	Update the delay functions and change the default pinmap for character displays (#7434 )	2017-08-31 18:31:07 -05:00
Scott Lahteine	105324b85b	Match the license headers in other files	2017-08-31 18:31:07 -05:00
Chris Pepper	61c0a10efe	Revert "SPI API platform implementation stubs" (#7416 ) This reverts commit `2dfa6ca72a`. Revert "Base HAL SPI Changes" This reverts commit `2afc521b8b`. Revert "Initial HAL SPI API" This reverts commit `58f7ffe09a`.	2017-08-31 18:31:07 -05:00
Bob-the-Kuhn	84a11cfedc	HAL compatible pinsDebug & misc Re-ARM has been tested. AVR has not been tested. 1) moved all cpu specific items to files in the low level HAL directory for that CPU (pinDebug_Re-ARM.h & pinsDebug_AVR_8_bit.h 2) added pinsDebug.h to the top level directory 3) modified HAL_pinsDebug.h to select the correct support file for the selected CPU 4) Patched sanitycheck to stop throwing false errors. A long term solution will be done 5) misc changes & bug fixes arduino.cpp - included macros.h to fix a missing definition pinmap_re-arm.h - removed a duplicated line. pinmapping.h - changed from "ENABLED" to "defined" to fix a compile error ====================================================================== split SanityCheck up, improve pinsDebug system ====================================================================== switch to latest pins_RAMPS_RE_ARM.h	2017-08-31 18:23:44 -05:00
Christopher Pepper	32e759c928	SPI API platform implementation stubs	2017-08-31 18:23:44 -05:00
Christopher Pepper	4183a249b6	Moved CMSIS and other LPC1768 dependencies Fixes Arduino IDE builds for 8-bit AVR, misc: Adafruit NeoPixel currently incompatible with Teensy 3.5-6, blacklisted	2017-08-31 18:23:44 -05:00
Christopher Pepper	b55295ad33	Post merge fix Add macros.h to allow Enabled macro, also need to reference include files directly	2017-08-31 18:23:44 -05:00
Christopher Pepper	c66d1ac651	Debug Pins Support	2017-08-31 18:21:38 -05:00
Christopher Pepper	bcd050f33b	Initial HAL SPI API	2017-08-31 18:21:38 -05:00
Christopher Pepper	44b0c186a6	HAL for Re:ARM (LPC1768) architecture	2017-08-31 18:21:38 -05:00
teemuatlut	f3e562e46e	HAL for 32-bit Teensy (3.5, 3.6) architecture	2017-08-31 18:15:07 -05:00
Christopher Pepper	cfef925559	HAL for DUE architecture	2017-08-31 18:15:07 -05:00
Christopher Pepper	4b16fa3272	Implement HAL and apply macros across code-base Implement AVR Platform	2017-08-31 18:14:31 -05:00

... 75 76 77 78 79 ...

4919 Commits