3DPrinting/MarlinFirmware
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-12-15 06:51:40 +00:00
Code Issues Releases Wiki Activity
12,641 Commits 21 Branches 81 Tags 2 GiB
5b2fd3ad86
Commit Graph

10745 Commits

Author SHA1 Message Date
Bob Kuhn
48bd8899bd Cohesion 3D Remix: Onboard SD card, Fysetc LCD (#13991) 2019-05-15 00:59:57 -05:00
FanDjango
dcaefc68a5 BLTouch.init should not deploy (#13988) 
Low or unknown probe clearance on init (even at powerup) is a risk and therefore, a deploy should be avoided because dragging the pin is possible: A deploy goes into alarm if it can't extend fully and then the subsequent stow will fail.
 2019-05-14 23:55:11 -05:00
Tanguy Pruvot
8075893352 STM32: fix sdcard filename conversion 2019-05-12 04:26:21 +02:00
chai-md
940ff8e7c8 Improve LV8729 stepping (#13776) 2019-05-11 19:02:19 -05:00
InsanityAutomation
991ee7552b Restore menu edit to 32bit value (#13976) 2019-05-11 18:44:35 -05:00
Tanguy Pruvot
93dd097b1c Use E2END, if defined, for STM32F1 (SD) (#13981) 2019-05-11 18:22:31 -05:00
InsanityAutomation
5108e4b6aa Cleaner EEPROM auto init (#13975) 2019-05-11 16:54:03 -05:00
Bob Kuhn
456a0ee76b Improve Due SW SPI, Fysetc sanity checks, &c. (#13939) 2019-05-11 16:51:39 -05:00
Robby Candra
7b78a20fb7 Fix: Debug Memory Dump size (#13957) 
* Fix Memory Dump size

* Fix Compile error on Memory Dump
 2019-05-11 11:44:39 -05:00
Scott Lahteine
a613bcad2d Fix some spelling 2019-05-10 20:39:19 -05:00
Tanguy Pruvot
62b36d1b98 Fix STM32 timer warnings (#13946) 2019-05-10 20:00:21 -05:00
Giuliano Zaro
f22c9a1ae1 Fix G-code parser with MMU2 (#13951) 2019-05-10 19:57:15 -05:00
Marcio Teixeira
746c38f4be Fix HAL_DUE multiple define error with graphical LCD (#13971) 2019-05-10 19:52:43 -05:00
Bob Kuhn
75eca5c4f8 Fysetc pins updates for RAMPS and SKR 1.3 (#13963) 2019-05-10 19:29:28 -05:00
Marcio Teixeira
227f29090d Add heater timeouts to ExtUI (#13970) 
- Add local UI methods to get heater timeout state.
- Add methods to resume timed-out heaters.
- Re-enable heaters on UI temperature request.
- Make `ExtUI` show a dialog box if pause needs a button press after reheat.
 2019-05-10 15:56:13 -05:00
Bob Kuhn
fa3739aa23 M100: LPC1768 and DUE compatibility (#13962) 2019-05-09 21:57:44 -05:00
InsanityAutomation
3f758d9e00 Fix some edit items for 16-bit encoder (#13948) 2019-05-09 18:28:47 -05:00
ManuelMcLure
51acbb2201 Prevent HOST_PROMPT_SUPPORT compile error (#13943) 2019-05-09 11:48:31 -05:00
Scott Lahteine
ad4ffa1d2f
Use C++ language supported 'nullptr' (#13944) 2019-05-09 11:45:55 -05:00
Tanguy Pruvot
e53d7e5517 STM32: ADC warning fix (#13933) 2019-05-09 00:33:38 -05:00
Scott Lahteine
23ec650410 Consolidate Malyan LCD and ExtUI 2019-05-07 21:31:30 -05:00
InsanityAutomation
6811e2921b BLTouch v3 / 3DTouch Interoperability & performance (#13814) 2019-05-07 21:25:54 -05:00
Giuliano Zaro
40aff7e1f2 Remove extra MMU (non-12V) code (#13938) 
`check_version` in state -5 should not be needed since it has already been called in state -4 and the tested build nr is only updated in state -4.
 2019-05-07 21:02:08 -05:00
Tanguy Pruvot
11adcf1ce3 Add'l PLR options, AVR strstr_P compat (#13880) 2019-05-07 20:38:40 -05:00
InsanityAutomation
5dcb25664f Option to Auto-Initialize EEPROM (#13935) 2019-05-07 16:30:31 -05:00
Ludy
a504366138 Fix probe fan compiling error (#13930) 2019-05-07 14:14:12 -05:00
Tanguy Pruvot
24e956d168 Avoid int8_t underflow on filament runout (#13895) 2019-05-07 13:58:10 -05:00
Stephan
483822f3aa Fix some THERMAL_PROTECTION_CHAMBER issues (#13678) 2019-05-06 19:55:01 -05:00
doggyfan
23a8707ef1 Configurable Thermistor (#13888) 2019-05-06 18:51:06 -05:00
J.C. Nelson
172abc305b Malyan M200 core fixes (#13927) 2019-05-06 18:07:13 -05:00
Scott Lahteine
a36782ac1d Define more u8g command macros 2019-05-06 17:26:34 -05:00
Scott Lahteine
f9a50f451d Serial out cleanup 2019-05-06 17:26:34 -05:00
Scott Lahteine
9853331b34 Fix temp init, loosen ADC grace period 2019-05-05 22:55:03 -05:00
Tanguy Pruvot
a4c24511f7 STM32: Fix Marduino SBI/CBI redefine (#13912) 2019-05-05 22:06:30 -05:00
Ludy
c837e9250c Define tmc variables where needed (#13918) 2019-05-05 22:04:47 -05:00
Ludy
f96eaad1ea Unused variable cleanup (#13917) 2019-05-05 22:01:04 -05:00
Ludy
421d526ba7 Update German language (#13915) 2019-05-05 22:00:19 -05:00
Giuliano Zaro
b07360f32a Update Italian language (#13916) 2019-05-05 21:59:34 -05:00
Robby Candra
79955f0c89 Fix PLR file delete bug (#13860) 2019-05-04 23:30:47 -05:00
ManuelMcLure
09f1b58146 Fix HOST_PROMPT_SUPPORT compile issue (#13847) 2019-05-04 22:55:51 -05:00
Giuliano Zaro
e2a77ed881 Bring chamber temp to completion (#13837) 2019-05-04 22:51:47 -05:00
Robert Mendon
24177954dd Add missing AZSMZ Mini SPI pins (#13824) 2019-05-04 22:04:01 -05:00
kAdonis
ee73e17c9b Hide 'vsense' report row if not used (#13884) 2019-05-04 22:00:24 -05:00
jmdearras
68004174d9 Fix thermistor 501 name (#13839) 2019-05-04 21:40:41 -05:00
Bob Kuhn
c48e6be366 Fysetc panel, RUMBA and ReARM pins, SPI mode 3 (#13900) 2019-05-04 17:59:36 -05:00
Chris
fd9d3ae181 Re-Arm 4x TMC2208 stepper improvement (#13819) 2019-05-04 17:26:13 -05:00
Tanguy Pruvot
e7b3720b81 Menu edit accel in increments of 25 (#13850) 2019-05-04 17:21:58 -05:00
Tanguy Pruvot
7da63fa03f Fix NOMORE() sign warning in stepper (#13894) 2019-05-04 15:59:38 -05:00
Roman Moravčík
6d0ce033c2 Update Slovak language. (#13840) 2019-05-04 15:58:01 -05:00
InsanityAutomation
3fcab8dbf1 Option to disable fans during pause (#13820) 2019-05-04 15:50:44 -05:00
Chris Pepper
66f7065248
[LPC176x] Update extra script to support Python3 (#13908) 2019-05-04 20:52:28 +01:00
Scott Lahteine
2f32a6612d Clean up Temperature::set_fans_paused 2019-05-04 14:36:59 -05:00
Marcio Teixeira
15357af67c Backlash cleanup (#13659) 
…And save backlash, fil. sensor, ExtUI userdata to EEPROM.
 2019-05-03 23:53:15 -05:00
Robby Candra
0181e57417 Add a minimum Z change option to power-loss recovery (#13859) 2019-05-02 22:29:05 -05:00
Robby Candra
c369477cb0 Fix bug: diveToFile breaks M23 (#13865) 2019-05-02 15:54:24 -05:00
Tanguy Pruvot
e5438a9a03 settings: store runout sensor on/off (#13876) 2019-05-02 00:47:26 -05:00
Scott Lahteine
e7682eea42
Use Arduino.h include wrapper (#13877) 2019-05-02 00:45:50 -05:00
Tanguy Pruvot
51d1e0f1dd Auto-mount the SDIO SD card (#13879) 2019-05-02 00:45:21 -05:00
Thomas Moore
ee243e4edf Fix mixing extruder filament change (#13803) 2019-05-01 21:55:58 -05:00
Scott Lahteine
bf54251a10
Finish, improve, clean up FYSETC_MINI_12864 revisions (#13871) 2019-05-01 20:05:29 -05:00
Scott Lahteine
9372e2603c Simpler neopixel comment 2019-05-01 13:55:51 -05:00
Tanguy Pruvot
3272d0db01 Update French language (#13866) 2019-05-01 13:00:07 -05:00
Chris Pepper
95beafa9a2
Fix typo 2019-05-01 16:30:21 +01:00
Ludy
408a5f08dc Update German language (#13853) 2019-05-01 01:25:57 -05:00
Tanguy Pruvot
cf3c746029 Improve French language (#13851) 2019-05-01 01:12:25 -05:00
Clinton James
2740cc64d8 Add SD Release when no SD_DETECT_PIN exists (#13857) 2019-05-01 01:00:21 -05:00
Luu Lac
39ebca6b5f Fix FYSETC, MINIPANEL, MKS_MINI_12864 display (#13864) 2019-05-01 00:37:52 -05:00
Giuliano Zaro
93dcb537ef Update Italian language (#13809) 2019-04-30 20:31:40 -05:00
Roxy-3D
142c8e2fed
Remove redundant Frivolous Game Options 2019-04-28 14:03:53 -05:00
Scott Lahteine
e43afb1a58 Clean up SKR pins 2019-04-27 14:56:12 +02:00
Scott Lahteine
9ccbd382e7 Update Watchdog description 2019-04-27 14:56:12 +02:00
Scott Lahteine
b6279abd30 Better THERMAL_PROTECTION_GRACE_PERIOD 
See #13783
 2019-04-27 14:40:09 +02:00
chai-md
ed9eaa1942 Fix a comment in fwretract.cpp (#13802) 2019-04-26 09:36:29 +02:00
InsanityAutomation
610fb46683 Fix some ExtUI issues (#13799) 2019-04-26 09:32:01 +02:00
Bob-the-Kuhn
db89fc0304 Revert "bring my copy up to date" 
This reverts commit 503905c628.
 2019-04-25 17:38:41 -05:00
Bob-the-Kuhn
503905c628 bring my copy up to date 2019-04-25 12:08:49 -05:00
Bob-the-Kuhn
73726d56b3 Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x 2019-04-25 12:06:01 -05:00
Scott Lahteine
5051909c3c
Update do_select_screen for general use (#13800) 2019-04-24 10:13:44 -05:00
Scott Lahteine
63f6ad3fd2 Basic RAMPS SD_DETECT_PIN override 2019-04-23 18:10:21 -05:00
InsanityAutomation
c6632925e3 Force no move on IDEX full control mode (#13797) 2019-04-23 15:20:59 -05:00
Giuliano Zaro
e2dd2268e8 Add a Z raise-between-probes to G34 (#13791) 2019-04-23 13:40:55 -05:00
Giuliano Zaro
0f9c49ccba Update Italian language (#13790) 2019-04-23 13:36:05 -05:00
Giuliano Zaro
d77ef437db Fix warning for redefined DEBUG_PRINT_P (#13789) 2019-04-23 13:35:02 -05:00
Marcio Teixeira
ca7f6ff287 Fix MSG_En messages for consistency (#13788) 2019-04-23 13:31:51 -05:00
Scott Lahteine
6ff81a33c1 Provide JSON values for SOFT_PWM_SCALE 2019-04-22 14:06:14 -05:00
Scott Lahteine
0c4d3e6622 Improve M906 description 2019-04-22 13:48:02 -05:00
Tanguy Pruvot
04ae3ba1fd Major update to French language (#13784) 2019-04-22 13:31:04 -05:00
chai-md
78d7349fd7 Remove extra Z raises in tool change (#13782) 2019-04-21 21:06:46 -05:00
Kajetan Rzepecki
875e673a8c Add HAL-based thermal protection grace period for all heaters (#13778) 2019-04-21 20:50:32 -05:00
Bob Kuhn
81ca5a4cd4 Fix and improve FYSETC LCD support (#13767) 2019-04-21 20:48:53 -05:00
felixstorm
4e35e6c705 Fix SS pin in ESP32 HW SPI (#13781) 2019-04-21 17:15:15 -05:00
felixstorm
4a48b70c0b Fix (re-)defines in HAL_ESP32 (#13780) 2019-04-21 17:14:38 -05:00
Ludy
4228fd3e03 Update German language (#13769) 2019-04-20 15:01:56 -05:00
Kajetan Rzepecki
5f70c876ae Fix _temp_error-related compile error (#13768) 2019-04-20 13:57:38 -05:00
Kajetan Rzepecki
ea1ee02b53 Disable hardware PWM on ESP32 I2S expander (#13762) 2019-04-20 13:41:17 -05:00
Scott Lahteine
bddb776ddb Add chamber max-temp check 
Followup to #13756
 2019-04-19 22:18:55 -05:00
Marcio Teixeira
d0c1eee53b Add extra max-temp safety checks (#13756) 2019-04-19 21:37:12 -05:00
Marcio Teixeira
4ac28ba6b3 Add missing file (#13754) 2019-04-19 20:20:45 -05:00
jmdearras
b65cb5704d Fix, improve FYSETC_MINI_12864 support (#13730) 2019-04-19 20:11:51 -05:00
Scott Lahteine
69c333ead9 More universal Formbot pins 
Replace `ROXYs_TRex` with pre-defines of the relevant pins at the configuration level.
 2019-04-18 21:09:34 -05:00
Scott Lahteine
0a6835fbea More robust HAS_LCD_CONTRAST 2019-04-18 21:09:34 -05:00
Marcio Teixeira
2e3d121ac4 Squelch compiler warning (#13739) 2019-04-18 13:18:49 -05:00
Kajetan Rzepecki
d83a7924e6 Fix ESP32 TOGGLE() with I2S expander (#13743) 2019-04-18 13:15:35 -05:00
Jimmy Wennlund
e6f6ed76c8 Show UBL Activate/Deactivate menu for current state (#13744) 2019-04-18 13:13:05 -05:00
Marcio Teixeira
08f21335a6 Fix bad opcode in LIGHTWEIGHT_UI; add 32-bit HAL and Due compatibility (#13751) 2019-04-18 13:10:58 -05:00
Kajetan Rzepecki
7c8ee0cd5b Enable more ADC1 channels (pins 32-39) (#13742) 2019-04-18 13:01:24 -05:00
Bob-the-Kuhn
520585c5ed Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x 2019-04-17 15:34:29 -05:00
Kajetan Rzepecki
e1acc09c6e Fix LPC1768 HAL SSD* screen init (#13741) 2019-04-17 14:57:50 -05:00
Marcio Teixeira
836435c5ef Fix action_edit int range bug (#13737) 2019-04-17 14:55:31 -05:00
Antonio Pérez
bf28ad4b6c Fix clear of Z position last digit (#13731) 2019-04-17 14:52:20 -05:00
Marcio Teixeira
866e2d41dc Correct range of LCD axis step editing (#13727) 2019-04-16 15:45:31 -05:00
Scott Lahteine
ab8052887f Add missing MSG_PAUSE_PRINT_INIT_1 for en 2019-04-16 13:54:20 -05:00
petrzjunior
12d340cf2a Update Czech language (#13729) 2019-04-16 13:53:14 -05:00
Robby Candra
e8dc87a2b7 Fix updated Allen Key pause probe logic (#13723) 2019-04-16 12:35:58 -05:00
Robby Candra
7ca1fea22b Option to pause probe deployment only when triggered, for manually-deployed allen-key probe (#13698) 2019-04-16 01:32:43 -05:00
Robby Candra
35160dfb7a Simplify PLR homing when Z homes to max (#13718) 2019-04-16 00:17:27 -05:00
Scott Lahteine
92ed9a2bb6 Fix is_M29 
Followup for #13013
 2019-04-15 23:47:06 -05:00
jmdearras
5f49b65c1f Move LPC SD options to configs, add MKS_MINI_DISPLAY to SKR boards (#13712) 2019-04-15 22:55:33 -05:00
Bob Kuhn
9b578ca343 Support FYSETC_MINI_12864 on Re-ARM, RAMPS_FD, MKS SBASE (#13717) 2019-04-15 22:54:11 -05:00
Scott Lahteine
9992c424f5 Patch G92.9 flags 
Followup to #13703
 2019-04-15 20:26:40 -05:00
ManuelMcLure
b1c13bce58 Fix EEPROM_CHITCHAT (and debug_out.h) (#13716) 2019-04-15 20:21:26 -05:00
Msq001
455ee23499 Fix, improve Power Loss Recovery (#13703) 
- Save and restore workspace offsets
- Add retract and purge (hidden) options
- Always restore axis relative modes
- Use added `G92.9` to do position restores
 2019-04-15 18:53:39 -05:00
Laurent
df75a606ff Support MKS SGen board (#13694) 2019-04-15 17:03:10 -05:00
Kajetan Rzepecki
20dc45bca7 Refactor, fix ESP32 WebSocketSerial (#13689) 2019-04-15 16:32:20 -05:00
Roman Moravčík
db373f130c Update Slovak language (#13692) 2019-04-15 16:14:49 -05:00
Kajetan Rzepecki
6fe90f0324 Define I2S pins for ESP32 (#13714) 2019-04-15 16:13:59 -05:00
InsanityAutomation
aa0f7afbe6 Fix call to uninitialized PWM pin, heater 2 overlap (#13674) 2019-04-15 15:57:34 -05:00
Bob-the-Kuhn
57aaa9110b Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x 2019-04-13 21:14:52 -05:00
Scott Lahteine
6a71df2925 Tweak babystep add_steps 2019-04-13 14:14:26 -05:00
Bob-the-Kuhn
9dd4252b39 Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x 2019-04-12 22:07:12 -05:00
Marcio Teixeira
bdfffee037 Modify Z-offset overlay for clarity (#13660) 2019-04-12 15:43:29 -05:00
Stephan
84273557f9 Move and update heated chamber settings (#13671) 
Co-Authored-By: the-real-orca <stephan.veigl@gmail.com>
 2019-04-12 15:38:10 -05:00
Ludy
62b4265410 Update German language (#13665) 2019-04-12 14:48:13 -05:00
Scott Lahteine
b18316dd37 Fix some spacing 2019-04-12 13:35:42 -05:00
Scott Lahteine
f2ba0a5ae7 Tweak some formatting 2019-04-12 13:15:37 -05:00
Scott Lahteine
7e58d33a2e Update some headers 2019-04-12 13:04:04 -05:00
Giuliano Zaro
64ee064ded Update Italian language (#13661) 2019-04-12 12:22:43 -05:00
Scott Lahteine
14b561f182 Extra AxisEnum values for E0-E5 2019-04-12 12:13:48 -05:00
Robby Candra
9e86fc3831 Require homing to toggle leveling (#13652) 2019-04-11 14:09:41 -05:00
Ludy
9fd3e64ba8 Fix compile error with EXTRUDER>1 (#13651) 2019-04-11 13:58:50 -05:00
Jamie
509dc283f2 Restore declarations of G53-G59 (#13654) 2019-04-11 13:51:05 -05:00
chai-md
2adc37becc MAGNETIC_SWITCHING_TOOLHEAD (#13629) 2019-04-11 13:29:17 -05:00
ManuelMcLure
492883859e Don't protect unused CS pins (#13647) 2019-04-10 21:57:57 -05:00
Scott Lahteine
9898f53361 Fix missing IS_SD_PRINTING 2019-04-10 21:48:16 -05:00
Scott Lahteine
1e59a2ac73 Hide pause/stop unless active printing 2019-04-10 19:46:59 -05:00
Scott Lahteine
ae42206500 Fix SD_REPRINT_LAST_SELECTED_FILE 2019-04-10 17:43:08 -05:00
Scott Lahteine
d72946a8d7 Fix LPC1768 build with no watchdog 
Fix issue mentioned at https://github.com/MarlinFirmware/Marlin/pull/13587#issuecomment-481737509
 2019-04-10 17:34:15 -05:00
Scott Lahteine
cee3b172b9
Fix Marlin splash screen logic (#13646) 2019-04-10 17:14:57 -05:00
ANMay-ru
052f2ac352 Fix RURAMPS4D baud rate (#13644) 2019-04-10 15:53:21 -05:00
Marcio Teixeira
e6ebd30f60 Fix LCD issue on stepper timeout (#13630) 
- Remove a re-paint of the status screen on stepper timeout, which would cause a garbled LCD with `LIGHTWEIGHT_UI` and could interrupt whatever else the user might be doing in a submenu (such as playing games!)
- Use the helper function to reset stepper timeout.
 2019-04-10 15:51:48 -05:00
klcjr89
a8edd4f6d4 Fix Azteeg X5 MINI BOARD_NAME (#13632) 
Co-Authored-By: klcjr89 <klcjr89@users.noreply.github.com>
 2019-04-10 15:46:12 -05:00
Scott Lahteine
5018fdacbe
Support FYSETC_MINI_12864_PANEL (#13365) 2019-04-09 18:34:29 -05:00
InsanityAutomation
4900c28bf6 Fix IDEX tool-change, and more (#13614) 2019-04-09 18:33:40 -05:00
InsanityAutomation
ba31d39f6d Azteeg X5 Mini support (#13425) 2019-04-08 23:10:45 -05:00
Scott Lahteine
9cb5c57b84 Adjustments to ui8tostr_percent 2019-04-08 21:47:50 -05:00
Scott Lahteine
321a5e6580
Fix SD card reselect when scrolled (#13624) 
- Change encoder position to 16-bit integer.
- Fix `SD_REPRINT_LAST_SELECTED_FILE` when the screen is scrolled.
 2019-04-08 21:10:41 -05:00
Scott Lahteine
0e3c9e726d Set default Raptor runout/caselight pins 2019-04-08 18:18:08 -05:00
Scott Lahteine
5e38d70697 Fix M217 report label, general cleanup 2019-04-08 18:18:08 -05:00
Scott Lahteine
fae2b7edc3 Update MMU2 code style 2019-04-08 18:13:42 -05:00
Scott Lahteine
c8a83fb122 SPINDLE_LASER_ENABLE => SPINDLE_LASER_ENA 2019-04-08 18:13:41 -05:00
Scott Lahteine
9abe9aff56
Confirm before starting SD print (#13616) 2019-04-08 13:44:35 -05:00
Scott Lahteine
7e0008f5b3 Fix SETCURSOR_RJ 2019-04-07 20:25:54 -05:00
Robby Candra
81c2c3ec11 Continuous filename scrolling (#13609) 2019-04-07 16:58:32 -05:00
Ludy
c29820f649 Suppress compile warning (#13612) 2019-04-07 16:53:30 -05:00
Scott Lahteine
a2b3ad6d0a Don't override RGB LED pins, by default 2019-04-07 16:42:26 -05:00
Bob Kuhn
9a56d90150 Fix M43 on LPC176x (#13587) 
The real fix. PR #13568 was wrong.
 2019-04-06 18:06:07 -05:00
Roxy-3D
9cee81d47e Option to show babysteps total since G28 (#13580) 2019-04-06 18:04:34 -05:00
Scott Lahteine
3221658a78 Adjust park position description 2019-04-05 20:40:50 -05:00
Scott Lahteine
028b78f623 Suppress a compile warning 2019-04-05 20:06:19 -05:00
Scott Lahteine
cf12fc8366
Expand on serial debugging (#13577) 2019-04-05 20:02:46 -05:00
Marcio Teixeira
bf7b28b456 Fix incorrect variable name (#13585) 2019-04-05 19:04:46 -05:00
Kajetan Rzepecki
27693cec29 Extend ESP32 HardwareSerial with flushTX. (#13588) 2019-04-05 19:04:02 -05:00
Alexander Gavrilenko
3c47e1b4d1 Support Black STM32F407VET6 with RAMPS-like shield (#13524) 2019-04-05 15:30:19 -05:00
VBen
0dfd76ba55 Fix Z hotend offset broken by parking extruder tool change (#13582) 2019-04-05 15:28:32 -05:00
Scott Lahteine
027a901bec Trim whitespace 2019-04-05 15:04:23 -05:00
Kajetan Rzepecki
692a0198f9 Fix SPISettings frequency parameters in ESP32 HW SPI (#13573) 2019-04-04 23:17:14 -05:00
Kajetan Rzepecki
63d95862fa Add FastIO TOGGLE for ESP32 (#13574) 2019-04-04 23:15:17 -05:00
drzejkopf
0992d1a4c8 Fix Invaders game compile error (#13575) 2019-04-04 23:13:11 -05:00
Robby Candra
cd1ef33c8c Drop extra PLR save test (#13554) 2019-04-04 22:47:00 -05:00
Scott Lahteine
72c7751768 Fix SERIAL_POS in use with DEBUG_OUT 2019-04-04 22:12:03 -05:00
Scott Lahteine
cacec5764a Clean up whitespace 2019-04-04 22:12:02 -05:00
Scott Lahteine
83e214478e Click-hold to exit Invaders, fix Brickout compile 2019-04-04 17:07:50 -05:00
Scott Lahteine
240ea1bbb3 Split up games into separate files 2019-04-04 03:06:19 -05:00
Marcio Teixeira
27a4927ed1 Add option to move away from endstop after homing. (#13557) 
Add option to move away from endstop after homing.
- Add `ENDSTOP_BACKOFF` for printers with a recessed Z home button (Lulzbot TAZ 6).
- Also prevents chattering when sensorless homing with axes against bumpers.
 2019-04-04 02:47:19 -05:00
InsanityAutomation
d44e5b1fde Fix stepper direction macros, multi-nozzle scope (#13569) 2019-04-04 02:44:07 -05:00
Scott Lahteine
10b9632bed Fix menu history item selection 2019-04-04 02:41:23 -05:00
Scott Lahteine
f1810689ff Fix bootscreen condition 2019-04-04 00:19:47 -05:00
Kajetan Rzepecki
b21ca53dfc SPIFFS-backed PersistentStore for ESP32 (#13566) 2019-04-03 20:28:26 -05:00
Scott Lahteine
af92ee9dd6 No PLR include needed in queue.cpp 2019-04-03 18:26:31 -05:00
Scott Lahteine
5d2c5877f7 DOGM bootscreen cleanup 2019-04-03 18:10:50 -05:00
Scott Lahteine
2aa35e95af More G26 arc cleanup 
Followup to #13531
 2019-04-03 16:03:21 -05:00
Scott Lahteine
20a41e2f7b SDCARD_RATHERRECENTFIRST with SDCARD_SORT_ALPHA 2019-04-02 22:25:18 -05:00
Robby Candra
46445a5a16 Event G-code for Stop SD Print (#13547) 
Co-Authored-By: 7eggert <7eggert@gmx.de>
Co-Authored-By: robbycandra <robbycandra.mail@gmail.com>
 2019-04-02 22:09:30 -05:00
Kajetan Rzepecki
2cfa9e9008 Fixed chamber-related compile error (#13552) 2019-04-01 17:53:56 -05:00
Scott Lahteine
a0a5c31c05
Power-Loss initialization fix (#13553) 
- Only save to PLR file on moves with E and X or Y
- Save to PLR after any long-ish Z downward move
 2019-04-01 17:52:45 -05:00
Scott Lahteine
8b7c3eec83 Games, for fun (and stress-testing) (#13464) 2019-04-01 17:48:54 -05:00
InsanityAutomation
fbc7b51a24 Use NO_FETCH for Dual X G28 (#13539) 2019-04-01 17:48:21 -05:00
Scott Lahteine
5de7b5b35e
Games, for fun (and stress-testing) (#13464) 2019-04-01 15:43:48 -05:00
InsanityAutomation
4961d8aa3e Update G28.cpp (#13539) 2019-03-31 19:50:40 -05:00
Scott Lahteine
de0046fc8b Fix empty HAS_TIMER macros 2019-03-30 23:04:40 -05:00
Kajetan Rzepecki
c9079165ee Fix MAX6675 readout with Hardware SPI (#13530) 2019-03-30 22:31:49 -05:00
ManuelMcLure
04086fc455 Minor optimization to ARC_SUPPORT code (#13531) 2019-03-30 22:29:37 -05:00
Robby Candra
a3f67acd6d Fix Power Loss Recovery file delete (#13522) 2019-03-30 13:14:58 -05:00
Marcio Teixeira
d992dfe7d5 Use the percent util func in the string func. (#13523) 2019-03-30 13:00:31 -05:00
drzejkopf
b1f739e27b CR10_STOCKDISPLAY support in Bigtreetech SKR (#13516) 2019-03-29 14:19:18 -05:00
Marcio Teixeira
5679fae11e UltraLCD enhancements (lower fan resolution, backlash menu) (#13519) 2019-03-29 14:07:43 -05:00
Msq001
f0d14b83bc Save/restore Relative modes in Power-Loss Recovery (#13501) 2019-03-29 13:40:42 -05:00
Marcio Teixeira
c6466c23fe Silence signed/unsigned comparison warning. (#13508) 2019-03-29 13:33:45 -05:00
InsanityAutomation
7240e3a68f Allow G26 with no heated bed (#13511) 2019-03-29 13:32:43 -05:00
Alexander Gavrilenko
6d9aaca082 Fix compilation error for MKS Robin (#13506) 2019-03-29 12:40:24 -05:00
Scott Alfter
c6dbe6e9d6 Fix Teensy 3.5/3.6 __get_primask (#13514) 2019-03-29 12:23:09 -05:00
Alexander Amelkin
e40636a7c1 Replace digitalPinHasPWM with HAS_TIMER (#13520) 2019-03-29 12:21:14 -05:00
Scott Lahteine
b46ca9aa94 Less timely comment, tweak conditions 2019-03-26 19:20:13 -05:00
InsanityAutomation
eb91f08725 Update descriptions and dont call unneeded functions 2019-03-26 11:24:52 -04:00
Ludy
fe346cd4d1 Fix DEBUG_EEPROM_READWRITE compile error (#13492) 2019-03-26 04:12:22 -05:00
Sam Lane
e3ab54753b Add extra Linear Advance factors (#13490) 2019-03-26 04:02:27 -05:00
Chris Pepper
ffc2c2d7c5 Move FAST_PWM_FAN code to HALs (#13491) 2019-03-26 01:03:23 -05:00
Thomas Moore
263f8edff8 Disable volumetric extrusion during G26 (#13479) 2019-03-25 22:41:52 -05:00
Bob Kuhn
6bd0a0be97 Relocate DUE Stepper ISR to TC0,2 (#13481) 2019-03-25 22:39:51 -05:00
Thomas Moore
13a12f8a87 Fix UBL mesh editor on delta (#13478) 2019-03-25 22:04:57 -05:00
Scott Lahteine
d2e0c03afb Remove trailing whitespace 2019-03-25 20:51:38 -05:00
Marcio Teixeira
7462fe3068 Fix compile error, squelch warnings (#13487) 
- Fix path to `bedlevel.h` include file
- Add default to `case` statements to suppress warnings
 2019-03-25 20:41:38 -05:00
Yannik Sembritzki
0d3ea59bcf Add pins for Dual Z UART on SKR 1.3 (#13474) 
Fix #13470
 2019-03-24 20:09:00 -05:00
pinchies
ef3b93daa1 Fix STM32F1 SD-based EEPROM emulation (#13475) 
If `openFile` is given `true`, then it has read-only access. Because all the writing occurs on the next line, this breaks SD card as EEPROM.
 2019-03-24 20:07:31 -05:00
Chris Pepper
aacc1148b0 Fix M106 for index > extruders (#13473) 2019-03-24 20:03:53 -05:00
Thomas Moore
c5e96544b5 Fix vtool compiler warning (#13476) 2019-03-24 20:02:28 -05:00
Thomas Moore
02dc72acb6 Disable ABL when leveling corners (#13471) 2019-03-24 20:01:18 -05:00
7eggert
d96f7d6068 Minimum segments for G2/G3. Better for small arcs. (#13466) 2019-03-24 19:53:47 -05:00
Scott Lahteine
380c771988 Handle word-padded flash-based eeprom (STM32F1) 
Fix #13445
 2019-03-24 19:14:04 -05:00
Scott Alfter
32332bcd03 Proceed with Teensy 3.5/3.6 HAL (#13450) 2019-03-24 00:08:32 -05:00
Scott Alfter
407202cc0f Fix BLTouch pre-3.0 compatibility (#13454) 2019-03-23 23:28:15 -05:00
Marcio Teixeira
a0ca98f699 Additional ExtUI features (#13449) 2019-03-23 23:09:18 -05:00
Sam Lane
a8fa275dc6 Fix Fan 0 responding to all fan speeds (#13444) 2019-03-23 23:00:31 -05:00
InsanityAutomation
5eeffab5e5 Fix BLTouch Menus (#13441) 2019-03-23 22:58:34 -05:00
Scott Lahteine
d8329d858d Default argument to defer_status_screen 2019-03-23 16:33:37 -05:00
Giuliano Zaro
9562a02c5a Update Italian language (#13440) 2019-03-20 18:26:55 -05:00
drzejkopf
70e6a3db8a Add LEVEL_CORNERS_HEIGHT to LEVEL_BED_CORNERS (#13439) 2019-03-20 18:26:12 -05:00
Roman Moravčík
f3cf95a937 Update Slovak language. (#13435) 2019-03-20 16:37:34 -05:00
Scott Lahteine
144018736a Use USES_Z_MIN_PROBE_ENDSTOP 2019-03-18 16:58:31 -05:00
InsanityAutomation
5b2c37d6c1 Followup to BLTouch (#13422) 2019-03-18 16:31:11 -05:00
InsanityAutomation
3fb8489ae3 EXTUI and UBL compilation fixes (#13420) 2019-03-17 07:57:54 -05:00
Scott Lahteine
b376c7e374 Group DISABLED items 2019-03-17 07:56:35 -05:00
Scott Lahteine
58bca67883 Unify status scrolling further 2019-03-17 07:56:35 -05:00
Scott Lahteine
c4443f885e finishstatus => finish_status 2019-03-17 07:56:35 -05:00
InsanityAutomation
691e5c3bb8 BLTouch V3.0 support (#13406) 2019-03-17 05:57:25 -05:00
Scott Lahteine
49cf92dc36
Extended condition macros (#13419) 
Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add:
- Alias `ANY(...)` for `!DISABLED(...)`
- Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...`
- Alias `EITHER(A,B)` for `ANY(...)`
- Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)`
- `NONE(...)` for `DISABLED(...)`
 2019-03-16 23:43:06 -05:00
Tobias Frost
d20eab4f83 Fix macro in set_color() (#13417) 2019-03-16 19:05:59 -05:00
Ludy
59353546e8 Fix BUTTON_EXISTS and misplaced comma (#13411) 
Fixes #13410 and redeclaration of `BUTTON_EXISTS`
 2019-03-16 11:59:12 -05:00
InsanityAutomation
09eb30dc05 IDEX Mirror mode based on Formbot / Vivedino Symmetric mode (#13404) 2019-03-15 22:46:27 -05:00
Scott Lahteine
5c1aa5162d Adjust M206 output in M503 for DELTA 2019-03-15 19:20:40 -05:00
Scott Lahteine
ad8b82d054 Fix KILL_PIN assignment for MKS_MINI_12864 
According to #13397
 2019-03-15 19:20:40 -05:00
Scott Lahteine
3a916b4ef2 Create bresenham.h 2019-03-15 19:20:39 -05:00
Karl Andersson
5d3928cb01 PWM is not defined on Arduino Core STM32 (#13405) 2019-03-15 19:14:06 -05:00
Scott Lahteine
9a515cbd32
Fix Pause Print message and behavior (#13394) 2019-03-14 02:26:07 -05:00
Scott Lahteine
f5bcc00570
Unify debugging output with debug_out.h (#13388) 2019-03-14 02:25:42 -05:00
Andrei Pozolotin
cc8a871705 Add capability string CHAMBER_TEMPERATURE (#13391) 
Reference: #13380
 2019-03-13 18:09:22 -05:00
Scott Lahteine
67bee06e43 No patch needed for non-libmaple analogWrite 
See https://github.com/pinchies/Marlin/pull/1#issuecomment-471388743
 2019-03-13 07:21:10 -05:00
Scott Lahteine
f89b375fb9
Fixes and improvements for PWM pins (#13383) 2019-03-13 06:51:15 -05:00
Scott Lahteine
87162658c4
Fix and improve software endstops (#13386) 2019-03-13 05:48:36 -05:00
Scott Lahteine
6214c997c0 Remove includes of <binary.h> 2019-03-13 05:32:33 -05:00
Scott Lahteine
4555ae448f Fixups for ESP32 2019-03-13 05:32:33 -05:00
Scott Lahteine
a5ea3e2f15 Fix hotend offset on switching toolhead change 
See commentary at #11623
 2019-03-13 05:32:21 -05:00
jmz52
8e0ac93d60 Fix 'UNUSED redefined' compiler warning (#13387) 2019-03-13 04:34:02 -05:00
Hadrien Jouet
0278ad0a6d Add ESP32 WiFi interface (#11209) 2019-03-13 00:48:08 -05:00
InsanityAutomation
c03df89921 ExtUI Mesh Leveling Extensions (#13363) 2019-03-13 00:45:52 -05:00
InsanityAutomation
050eac03af Single X Duplication Extension (#13373) 
* Multi-nozzle selective duplication
* Use a bit-mask, reduce stepper_indirection.h size
* Tweak the multi-nozzle duplication description
* Use 'S' as a bool in M605
* Add HAS_DUPLICATION_MODE conditional
* Remove '_MODE' from the option name
* M605 in the style of Stacker M280
* Also include direct mask style (P)
 2019-03-13 00:42:50 -05:00
Scott Lahteine
ad91476d26 Fix USEABLE_HARDWARE_PWM 2019-03-13 00:12:46 -05:00
Scott Lahteine
d63da4592d Tweak to SCARA_move_to_cal 2019-03-12 22:06:50 -05:00
Scott Lahteine
51ff5b68fa Clean up fastIO ahead of PWM patch 2019-03-12 20:39:55 -05:00
Scott Lahteine
388babbcea Tweak SERIAL_PRINTF 2019-03-11 20:58:27 -05:00
Scott Lahteine
d94e077901 Apply HAS_HOTEND_OFFSET where needed 2019-03-11 20:58:27 -05:00
Scott Lahteine
11d6a939df Always define axis_unhomed_err 2019-03-11 20:58:27 -05:00
7eggert
10c8c034bd Allow both encoder and ADC keypad (#13355) 2019-03-11 18:10:56 -05:00
Andrei Pozolotin
31ff7da7ac Add missing CHAMBER options (for M141) (#13371) 2019-03-11 16:50:07 -05:00
Scott Lahteine
0375e92847 Followup to serial rework 
As mentioned in #13370
 2019-03-11 16:46:04 -05:00
jmz52
013bb469ca Fix compilation for STM32F1 with no SDIO (#13366) 2019-03-11 16:40:51 -05:00
Scott Lahteine
e52bcc9408 Limit top bed temp to BED_MAXTEMP - 10 
The chances of a 10° overshoot is pretty minimal.
 2019-03-11 16:32:34 -05:00
Scott Lahteine
98b55421a5 Clean up some temp config 2019-03-11 16:31:23 -05:00
InsanityAutomation
785a7028bf Followup to 'volatile' patch (#13369) 
Originally #13344
 2019-03-11 15:01:57 -05:00
Scott Lahteine
aa1d587128 Some LCD code cleanup 2019-03-11 05:07:31 -05:00
Scott Lahteine
fa11427ec6 Remove obsolete LCD_CONTRAST 2019-03-11 03:33:07 -05:00
pinchies
4df9509ead Add support for printers with inverted fan pins (#13362) 
Add support for printers with inverted fan pins by adding `#define FAN_INVERTING 1` to `Configuration_adv.h` and modifying the fan write macros.
 2019-03-10 20:51:21 -05:00
Scott Lahteine
1f7e220387 Make HAL ISR macros function-like 2019-03-10 20:44:27 -05:00
Scott Lahteine
e3ce346f24 Report position to host in Nozzle::park 2019-03-10 19:09:28 -05:00
Scott Lahteine
77b4176152 Use lib include for bit_constants.h 2019-03-10 19:09:28 -05:00
Scott Lahteine
3419099f0a Clean up whitespace 2019-03-10 19:09:28 -05:00
pinchies
4c43e6c48b Fix "spontaneous heating" issue (WRITE bug) on STM32 (#13356) 
Should fix "spontanous heating" problems due to order of operations error. Error occurs at least with ststm32 v5.1.0 in PlatformIO.
 2019-03-10 17:25:54 -05:00
Michiel Baird
b824a517aa Add G38.4 and G38.5 (#13348) 2019-03-10 17:22:09 -05:00
Bruce j Beare
e4d080e63c Reset after kill with a button on the KILL_PIN (#13091) 2019-03-10 09:57:38 -05:00
MoellerDi
c36989c39e Fix chamber temperature measurement (#13350) 2019-03-10 09:51:13 -05:00
Scott Lahteine
12503fce06 Followup to wait_for_user fix 2019-03-10 09:14:02 -05:00
Scott Lahteine
33a08fc6f7 Fix typos from temperature rework 
Followup to #12201
 2019-03-10 08:28:16 -05:00
Tobias Frost
2efbcc90c5 Fix wait_for_user compile error (#13352) 2019-03-10 08:07:41 -05:00
Tobias Frost
60e82e3929 Send notifications to ExtUI for M0/M1 (#13344) 
- Send notifications to ExtUI for M0/M1

- wait_for_user can be non-volatile (not changed by interrupt)
  C / C++ compilers don't optimize away reads of non-volatile variables when a function call is used between accesses, because *any* variable could be changed by the function call. Since `wait_for_user` can't be changed without a function call, it should be non-volatile so the compiler can optimize away cases where it is read more than once without an intervening function call.
 2019-03-09 14:20:37 -06:00
Marcio Teixeira
00fc43144a Follow up fixes to various PRs. (#13334) 
- Ensure `MarlinUI:get_progress` is defined for `ExtUI`.
- Fix for `BACKLASH_SMOOTHING` with small segments.
  `BACKLASH_SMOOTHING` with extremely small segments failed to fully correct due to the correction factor being rounded down. Rounding up ensures the entire backlash will converge to zero even for small segments.
- Add pinout for the beta revision `EINSY_RETRO`.
- Update soft endstops with tool offsets (for toolchange et. al. move clamping) (#12568)
 2019-03-09 14:20:37 -06:00
Scott Lahteine
c7d618b4d9 Fix SERIAL_ECHOLNPAIR 
Fix #13333
 2019-03-09 14:20:37 -06:00
InsanityAutomation
d54741eda8 Update some G26 plausible values. Add speed control. (#13330) 2019-03-08 03:13:44 -06:00
Msq001
fb3302feda Fix STM32F1 Serial and ADC pins (#13331) 2019-03-08 02:21:32 -06:00
Reece Kibble
dbead66988 Allows user to set (almost) any PWM frequency (#12638) 2019-03-08 02:15:42 -06:00
Tobias Frost
afbec5ff7e Have ExtUI::getProgress use ui.get_progress (#13328) 2019-03-07 18:00:38 -06:00
3dlabsio
645ca7af7a M141 Heated Chamber, Temperature rework (#12201) 2019-03-07 02:09:39 -06:00
Scott Lahteine
44571775bd Further support for 6 extruders 2019-03-07 01:00:56 -06:00
Scott Lahteine
893ee68b52 Clean up trailing whitespace 2019-03-06 01:02:43 -06:00
Scott Lahteine
39f1222060 One fewer G29 error string 2019-03-05 23:04:52 -06:00
Scott Lahteine
cfdb38eda4
Allow SERIAL_ECHOPAIR to take up to 12 pairs (#13311) 2019-03-05 06:46:19 -06:00
Scott Lahteine
4771e372a1
Update criteria for PAUSE/RESUME/STOP menu items (#13294) 2019-03-05 06:46:06 -06:00
Tobias Frost
56fdcf93d1 Disallow SD_DETECT_INVERTED with FYSETC F6. (#13307) 2019-03-05 06:45:28 -06:00
Tobias Frost
7ce13a6ec1 Fix a print_job_timer compile error (#13304) 2019-03-05 06:39:15 -06:00
Tobias Frost
6df51201ae Include EXTENSIBLE_UI in single LCD sanity check (#13306) 2019-03-05 06:33:36 -06:00
Scott Lahteine
2e5a3b01fd Save Power Loss Recovery only on move commands 2019-03-05 02:43:29 -06:00
Scott Lahteine
15738ea506 Update a motion comment 2019-03-05 00:50:29 -06:00
Scott Lahteine
bc87e97357 Prevent a tool change move out of bounds 2019-03-05 00:50:29 -06:00
Scott Lahteine
2212da453a
Distinguish between analog/digital auto fans (#13298) 2019-03-05 00:41:31 -06:00
Chris Pepper
2513f6b550
Fix multiport G28 with Binary Transfer (#13308) 2019-03-04 16:44:54 +00:00
Chris Pepper
38bef9da91 Report auto temp to both serial ports, if available (#13301) 2019-03-03 21:03:48 -06:00
Robert Mendon
367d392880 Init stepper current after stepper pins are set up (#13302) 2019-03-03 20:58:02 -06:00
InsanityAutomation
bf8b38e0f7 Relocate configs above Marlin/src folder (#13299) 2019-03-03 16:50:56 -06:00
Scott Lahteine
d71dc5cf42 Fix for Ender 4 fan/case light pin 
See #12731
 2019-03-03 07:43:27 -06:00
Anthony Rich
7640b328df Support for Tronxy X5S 2e (#13297) 2019-03-03 07:41:05 -06:00
Scott Lahteine
599cdc3f0f Remove dead code from get_pid_output 
See #12981
 2019-03-03 05:45:20 -06:00
Scott Lahteine
35ae5daf2d Split up sdcard G-codes 2019-03-03 01:52:15 -06:00
Scott Lahteine
3f36a38512 Clean up some pre-serial-redirect includes 2019-03-03 01:52:15 -06:00
Scott Lahteine
fa0d909dd3 Add FIL_RUNOUT_PIN for BIGTREE_SKR_V1.3 
See #13267
 2019-03-03 00:27:47 -06:00
Ludy
bd4160dbaf Unused CS_ACTUAL_sb (#13282) 2019-03-02 17:30:30 -06:00
Vasily Evseenko
71773b128d Fix stepper use before init. Add Ultimaker2+ Extended clone config (#13284) 2019-03-02 17:29:02 -06:00
Scott Lahteine
edc4e037c4 Add a note to G10 2019-03-02 17:19:36 -06:00
Tobias Frost
57afd0ab37 Fix range check bug in FileList::seek() (#13286) 
When `count()` returns 0, `pos > (count()-1)` will always yield `true` due to integer underflow.
 2019-03-02 16:43:08 -06:00
kAdonis
05c2f80826 Fix bug in wait-for-heatup (#13290) 2019-03-02 16:29:10 -06:00
Chris Pepper
b0553d2d97 Add M997 support and simple implementation for LPC176x (#13281) 2019-03-01 20:11:50 -06:00
Scott Lahteine
fa236e9718 General cleanup ahead of L64XX 2019-03-01 19:58:07 -06:00
Scott Lahteine
2f1e1dcb42 Gradual step towards EXTRUDERS 0 support 2019-03-01 01:51:24 -06:00
Scott Lahteine
99d0022fae
Drop the Z_MIN_PROBE_ENDSTOP option (#13276) 2019-03-01 00:27:45 -06:00
Scott Lahteine
9a6b90f47d TMC2660.h comment tweaks 2019-03-01 00:25:22 -06:00
Scott Lahteine
a2e3226597 Init XYZ to configured home position 2019-02-28 22:10:26 -06:00
Scott Lahteine
4fbbce9a35 Marlin Dev Mode for DOGM status screen 2019-02-28 22:10:26 -06:00
Scott Lahteine
998ce55be0 Alternative fan bitmap 2019-02-28 22:08:20 -06:00
InsanityAutomation
e2e2a55d9b Add thermistor type 67 SliceEng (#13275) 2019-02-28 19:44:17 -06:00
Msq001
5b7ad3a5a0 Fix SKR onboard TF card CS pin (#13272) 2019-02-28 19:41:19 -06:00
Scott Lahteine
7fde3ed915 Skip hysteresis check when temp is already close to target 
To eliminate a long delay during pause, park, and filament change
 2019-02-28 14:35:19 -06:00
Chris Pepper
7de6476b3d
Fix binary protocol error 2019-02-28 02:31:42 +00:00
Scott Lahteine
2c10222e87 card.transfer_port => transfer_port_index 2019-02-27 20:14:17 -06:00
Chris Pepper
4ab433d391 Fix binary protocol with one serial port (#13270) 
- The `sdcard.transfer_port` variable is Marlin's internal serial port index, not the physical serial port number.
- Added packet number to "ok" response so hosts don't need to wait for the ACK.
- Renamed feature to `BINARY_FILE_TRANSFER`, as the speed up is only consequential to the ability to transfer binaries over serial.
 2019-02-27 19:57:48 -06:00
InsanityAutomation
eb4bf93ea4 Add more Babystep options (#13262) 2019-02-27 04:38:56 -06:00
Scott Lahteine
f37df28d17 UBL G29 T current position fix 
Counterpart to #12845
 2019-02-26 22:25:53 -06:00
Msq001
f8a39919fa Add Bigtree SKR 1.3 board (#13267) 
Co-Authored-By: Msq001 <msq001@users.noreply.github.com>
 2019-02-26 21:30:00 -06:00
Bob Kuhn
ddbe4cfa20 Printrboard G2 support (#13116) 2019-02-26 21:03:13 -06:00
Scott Lahteine
4200f9ed62 Hide freeMemory et.al. warnings 2019-02-26 18:03:00 -06:00
Scott Lahteine
dc88747770 Fix Due GET_ARRAY_IS_DIGITAL 
Co-Authored-By: bob-the-kuhn <bob.kuhn@att.net>
 2019-02-26 17:49:14 -06:00
Scott Lahteine
a79b9bbe6b Cleanup whitespace, add a const 2019-02-26 17:49:14 -06:00
Giuliano Zaro
2616e4d4d9 Remove duplicated 'chitchat' defines (#13258) 2019-02-25 16:13:01 -06:00
Scott Lahteine
5d28575d4d Clean up some motion code 2019-02-25 16:01:42 -06:00
Scott Lahteine
808b076000 Update some ABL/UBL conditionals 2019-02-25 16:01:42 -06:00
Scott Lahteine
833c2e54a1 Add an empty flushTX to MarlinSerialUSB_Due 2019-02-25 13:48:14 -06:00
Scott Lahteine
38363902c7 Fix sanity checks for distinct E factor settings 
Reference #13156
 2019-02-25 00:20:36 -06:00
Scott Lahteine
64253e1a58 Followup to serial reform 
Reference #13250
 2019-02-25 00:20:36 -06:00
Minims
92a4984066 Fix G34 probe position (#13251) 2019-02-24 13:57:30 -06:00
Scott Lahteine
e15354e387
Simplify serial port redirect (#13234) 2019-02-23 22:53:01 -06:00
Chris Pepper
88cc1d1a31
Fix Preprocessor syntax in Re-ARM pins file (#13247) 2019-02-24 01:36:58 +00:00
Karl Andersson
76e9ee33aa Fix include order to make SERIAL_PORT_2 work (#13241) 2019-02-23 16:56:09 -06:00
Bruce j Beare
562f2321d2 Fix a G34 bug, allow negative Z corrections (#13240) 2019-02-23 02:41:52 -06:00
FernandoVelcic
edf025ed8d Update Spanish language (#13236) 2019-02-23 00:41:02 -06:00
Scott Lahteine
02fec89a0d Turn fans off in zero_fan_speeds 
Addressing #13231
 2019-02-22 21:00:44 -06:00
Scott Lahteine
15aa932aa6
HAL for Linux (#13146) 2019-02-22 19:09:10 -06:00
kwalters3
5eb82ca6a8 Change SSD1306_OLED_I2C_CONTROLLER to HAS_SSD1306_OLED_I2C (#13223) 2019-02-22 19:08:36 -06:00
Marcio Teixeira
109e67169c Define G21 as NOOP w/o INCH_MODE_SUPPORT (#13229) 
Ticket #13228

If `INCH_MODE_SUPPORT` is undefined, G20 is an unknown command as it should be (Marlin is, by default, operating in metric mode). G21, however, is found in many slicers and printer start gcode sections and should be accepted (as a NOOP) to avoid the unknown commands.
 2019-02-22 15:35:32 -06:00
AnHardt
31b0be74af Fix autotemp_factor menu setting (#13226) 
Fix #12643
Only factors above 1 can have a 'positive' effect.
 2019-02-22 15:30:17 -06:00
Evgeny-SPB
f6ab62bc13 Fix Creality CR-10 S5 filament change (#13219) 2019-02-21 05:40:49 -06:00
Thomas Moore
9f5e4e5ad8 Update LPC1769 Pins Files (#13183) 2019-02-21 00:54:05 -06:00
Greg Nutt
608a6810e7 Fix DOGLCD_A0 pin in pins_Smoothieboard.h (#13217) 2019-02-20 18:08:49 -06:00
Scott Lahteine
80359c9937 Add more parameters to M240 
Co-Authored-By: shitcreek <45380455+shitcreek@users.noreply.github.com>
 2019-02-20 14:51:36 -06:00
Scott Lahteine
a43e892fb5 Use 8-bit i2c address on LPC platform 
Fix #9799 — hopefully not a unicorn
 2019-02-20 06:27:26 -06:00
Scott Lahteine
631d867dc9 HAL cleanups 2019-02-20 06:27:26 -06:00
Scott Lahteine
89bbc30a09 Fix init of power supply pin 
Fix #13184
 2019-02-20 05:29:05 -06:00
Scott Lahteine
44c22e3935 Provide a default MAX6675_SS_PIN for ReARM 
See #8010
 2019-02-20 05:06:06 -06:00
Scott Lahteine
3c9a7926c2 Fix compile error with JUNCTION_DEVIATION 
See #13000
 2019-02-20 04:54:26 -06:00
Scott Lahteine
758c6c9464 Very minor SPI speedup 2019-02-20 04:36:23 -06:00
Scott Lahteine
422dd6666e Fix Due EEPROM write bug 
See #13065
 2019-02-20 04:36:23 -06:00
Scott Lahteine
03e109c4a3 FLASH_EEPROM => FLASH_EEPROM_EMULATION 2019-02-20 04:36:23 -06:00
Scott Lahteine
50917ccda6 Tweak some u8g interface code 2019-02-20 04:26:34 -06:00
LinFor
ba39186364 TMC_DEBUG optimization and improvements (#13135) 2019-02-20 02:22:42 -06:00
Scott Lahteine
1424b368cf Tweak M122 comment in configs 2019-02-19 16:20:18 -06:00
Scott Lahteine
3a1b6fe8c1 Coding standards 2019-02-19 14:58:39 -06:00
InsanityAutomation
19af90face Fix a host action compile error (#13208) 2019-02-19 14:47:31 -06:00
Marcio Teixeira
992cdc8d14 Fix host action / G-code ordering in event_probe_failure (#13207) 
Observing from the console, it makes the most sense to do `//action:probe_retry` before executing commands.
 2019-02-19 14:45:03 -06:00
InsanityAutomation
33a6d52965 Fix a RAPTOR2 pin conflict (#13205) 2019-02-19 14:42:02 -06:00
InsanityAutomation
52665f54ad Fix bad Purge More logic (#13193) 2019-02-19 14:37:18 -06:00
Scott Lahteine
18458ec42b Error in Smoothieboard for unsupported display 2019-02-19 14:17:33 -06:00
InsanityAutomation
d4ed9b3ef1 Babystep also requires homing (#13191) 2019-02-17 14:35:45 -06:00
InsanityAutomation
ca7b2f574f Fix condition on tool change filament swap menu (#13190) 2019-02-17 12:33:46 -06:00
Roman Moravčík
208ab8b366 Fix compilation with one service interval (#13185) 2019-02-17 12:32:47 -06:00
Roman Moravčík
567d03a269 Update Slovak language (#13187) 2019-02-17 12:29:49 -06:00
Alain Martel
27203c62b8 Enable M240, set photo pins for 3DFabXYZ i3 (#13174) 2019-02-15 21:16:39 -06:00
Evgeny-SPB
3025ddf179 Support for Creality CR-10 5S (#13173) 2019-02-15 21:09:44 -06:00
Scott Lahteine
e00aad84af Add M240 parameters D I J R S 2019-02-14 20:00:40 -06:00
Marcio Teixeira
31c240a8db Enhancements to G425 (#13159) 
- Turn off bed leveling prior to calibrating.
    - This prevents lateral probes from having a Z component that
      triggers the Z endstop and causes the motion to be aborted.
- Got rid of static const float arrays "dimension" and "true_center"
    - Frees up 24 bytes of SRAM
- Changed incorrect use of "bool" for float in backlash macros.
    - Replaced arguments with 0.0f and 1.0f for clarity.
- Now only disables soft endstops (since calibration cube is outside of bed)
    - Not necessary to disable global endstops
 2019-02-14 16:45:31 -06:00
Andy Shaw
84fc400aba Update BIQU SKR V1.1 pins, add TMC2130 settings (#13166) 
* Remove untested displays add TMC2130 configs.
* Remove references to the ReARM, delete untested displays. Add TMC2130 settings. Cleanup spacing, etc.
 2019-02-14 16:43:56 -06:00
Scott Lahteine
ab2816c870 Patch for M240 2019-02-14 15:13:57 -06:00
Scott Lahteine
d2bdb71c13
Add PHOTO_GCODE option, photo trigger physical move (#13168) 2019-02-14 15:09:35 -06:00
Scott Lahteine
be9a409980 Fix M125 XY parameters, export get_homing_bump_feedrate 2019-02-14 05:25:46 -06:00
Scott Lahteine
ce40c2e87c Use do_blocking_move_to(ref, fr) 2019-02-14 02:22:08 -06:00
Giuliano Zaro
bdc2f10b90 Update Italian language, fix unused var warning (#13164) 2019-02-13 21:05:18 -06:00
Marcio Teixeira
9f0e1834ec Followup to #13039 (#13163) 
- Fix compile error when accessing `process_subcommands_now_P`.
- Use `const` var eliminating double-negative (to make code more understandable).
 2019-02-13 20:39:38 -06:00
Ludy
1ace97e946 [2.0.x] Update German language (#13150) 2019-02-13 20:31:50 -06:00
Scott Lahteine
7cf9b93f26 Add HAS_FILAMENT_SENSOR ahead of 12962 2019-02-12 20:13:20 -06:00
Giuliano Zaro
2c8d12d3ec Update Italian language (#13148) 2019-02-12 18:40:34 -06:00
Scott Lahteine
c2b90c44e4 Prettify some code comments 2019-02-12 17:43:37 -06:00
Scott Lahteine
a0dadc8c62 Smaller I2CPositionEncoder strings 2019-02-12 16:21:56 -06:00
Scott Lahteine
18996d2595 Fix some spelling 2019-02-12 16:21:56 -06:00
revilor
e56c13670d Service interval watchdog (#13105) 2019-02-12 15:58:56 -06:00
InsanityAutomation
7f1b69b0c8 Add HOST_PROMPT_SUPPORT (#13039) 2019-02-12 15:55:47 -06:00
Scott Lahteine
0feeef2604 Update copyright in headers 2019-02-12 15:30:11 -06:00
Scott Lahteine
894f5c24a8 Fix trailing whitespace 2019-02-12 14:25:57 -06:00
Roman Moravčík
bace52afd7 Fixed compilation with MMU2_MENUS disabled (#13140) 2019-02-12 12:55:49 -06:00
Ludy
584f9cd449 Update German language (#13137) 2019-02-12 12:54:57 -06:00
Scott Lahteine
d9a3fea022 Comments in HAL_spi_STM32F1.cpp 2019-02-11 18:06:33 -06:00
Giuliano Zaro
773fa5c40f Fix define used when PID is off (#13119) 
Replaced `PID_MAX` with `BANG_MAX` since it should be the correct define to be used when PID is not enabled.
 2019-02-11 17:29:17 -06:00
Giuliano Zaro
f7efe6f6c5 [2.0.x] Fix TEMP_STAT_LED startup init (#13120) 2019-02-11 17:27:59 -06:00
Ludy
2bd6ce4b62 Update German language (#13125) 2019-02-11 17:08:21 -06:00
Giuliano Zaro
27115ff7eb Update Italian language (#13123) 
Incomplete.
 2019-02-11 17:07:21 -06:00
Roman Moravčík
08a8bd10ca Updated Slovak translation (#13122) 2019-02-11 17:06:10 -06:00
Scott Lahteine
3e2a4c3b26 Show mixer and temperature menus while printing 2019-02-11 16:52:47 -06:00
Scott Lahteine
8d271f20fe
C10mini E steps of 95 
See https://www.patreon.com/posts/creality-cr10-24602624
 2019-02-10 14:23:05 -06:00
Scott Lahteine
9737608f0a Enable gradient when alias is cleared 2019-02-10 06:39:12 -06:00
Simon Jouet
5cd0fa3ce1 Basic GPIO expander using the ESP32 I2S peripheral (#12959) 2019-02-10 05:40:31 -06:00
Scott Lahteine
3983cacbcf No extern needed for func decl 2019-02-10 05:38:27 -06:00
Scott Lahteine
43b29c093b Update pinsDebug_list.h with XY PWM pins 2019-02-10 05:13:05 -06:00
Scott Lahteine
166e567ab8 Fix HAS_MOTOR_CURRENT_PWM 2019-02-10 05:06:46 -06:00
Scott Lahteine
6de3d34378
M166 Gradients, LCD Menu for 2-channel Mixer (Geeetech A10M/A20M) (#13022) 2019-02-10 04:54:23 -06:00
LinFor
7ee35c2611 PID_MENU option to save PROGMEM in LCD menus (#13095) 2019-02-10 04:03:18 -06:00
Ludy
936f982392 Update German Language (#13110) 2019-02-10 03:55:08 -06:00
AnHardt
0e37fe8776 Apply minimum C in M303 (#13113) 
Apply minimum `C` in `M303`. `PID_autotune()` needs to be called with a 'C'ycles-parameter >2 to give meaningful (different from 0) PID-factors. Therefore silently raise C to 3. Fixing one aspect of #13104
 2019-02-10 03:54:45 -06:00
Scott Lahteine
5a316664e5 Update chopper timing 2019-02-10 03:12:20 -06:00
Scott Lahteine
fcb16ceb29 Update default config 2019-02-10 00:20:11 -06:00
Alain Martel
9ae7cca5e9 Disable RGB_LED for 3DFabXYZ (#13097) 2019-02-08 15:18:20 -06:00
Scott Lahteine
f3b6cb4d34 Clean up, update config comments 2019-02-08 15:13:52 -06:00
Scott Lahteine
ae03753ef1 Fix PCA9533 with PRINTER_EVENT_LEDS 2019-02-08 15:13:52 -06:00
Scott Lahteine
95d3f3953a DEFAULT_WEBSITE_URL => BOARD_WEBSITE_URL 2019-02-08 14:54:34 -06:00
Scott Lahteine
6ddd81c178
[2.0.x] Update German Language (#13100) 
add MMU2
 2019-02-08 14:25:24 -06:00
Giuliano Zaro
7c9ff322f3 Update Italian language (#13099) 2019-02-08 14:23:37 -06:00
Ludy
ce8cb6a5d9 [2.0.x] Update German Language 
add MMU2
 2019-02-07 20:04:34 +01:00
Scott Lahteine
f269766408 Put the MMU2 menu with the others 2019-02-06 17:38:46 -06:00
Marcio Teixeira
e1604198ff G425 — Auto-calibrate Backlash and Nozzle Offsets (#13050) 2019-02-06 17:20:17 -06:00
Marcio Teixeira
113af46a1b Add ExtUI methods to babystep probe/nozzle offsets (#12590) 2019-02-06 07:16:54 -06:00
InsanityAutomation
413e303ad5 More Advanced Pause options (#12984) 2019-02-06 06:39:42 -06:00
Mark Zachmann
19cf72e057 Support individual solenoid disable with M381 (#13008) 2019-02-06 06:34:53 -06:00
teemuatlut
d81342254a Support new TMC drivers (#13026) 2019-02-06 06:33:14 -06:00
Scott Lahteine
e1587da228
Clean up HAL_spi_Due.cpp (#13087) 2019-02-06 06:31:31 -06:00
Rolf Werum
524c6c10bf MAGNETIC_PARKING_EXTRUDER (#12351) 2019-02-06 06:30:53 -06:00
Scott Lahteine
1bd9a63049 Add HAS_EXTRA_ENDSTOPS macro 2019-02-06 05:10:05 -06:00
Scott Lahteine
3c49396370
Fix compile error with DUE + MAX6675 (#13086) 2019-02-05 22:56:13 -06:00