Scott Lahteine
4f660a18bc
Add Z_PROBE_LOW_POINT to prevent damage
2018-04-09 17:22:28 -05:00
Scott Lahteine
e143b1252f
Appy const to manage_inactivity
2018-04-08 23:53:55 -05:00
Scott Lahteine
647c04def8
Automatically reset stepper timeout in manage_inactivity
...
Any code that adds moves to the planner can skip resetting the stepper timeout. We can let `idle` / `manage_inactivity` reset the timer whenever it detects any moves in the planner.
2018-03-21 19:08:02 -05:00
Scott Lahteine
d9e1cbebea
Tweak use of move_z_after_probing
2018-03-21 01:36:16 -05:00
Scott Lahteine
e5fbbbc068
Allow no raise after run_z_probe in probe_pt
2018-03-21 01:36:16 -05:00
Scott Lahteine
4eddcf9142
Also suspend keepalive messages with suspend_auto_report
2018-03-21 00:26:00 -05:00
Scott Lahteine
72776f647b
Move _AXIS macro to macros.h
2018-03-19 17:59:59 -05:00
Scott Lahteine
ccb2a95456
Update includes for gcode.h => parser.h
2018-03-14 01:01:45 -05:00
Scott Lahteine
e63cb5fe8f
[1.1.x] Make MIN_PROBE_EDGE a general option (for electronic probes) ( #10068 )
...
Some probes don't work near the edges of the bed. This change promotes MIN_PROBE_EDGE to a general setting that applies to all probing functions.
2018-03-13 01:15:29 -05:00
Scott Lahteine
8c7e98627f
Patch do_blocking_move_to so 'destination' can be used
2018-03-12 08:06:48 -05:00
Scott Lahteine
0aa100a31e
Add Z_AFTER_PROBING option
...
Some fix-mounted probes need manual stowing. And after probing some may prefer to raise or lower the nozzle. This restores an old option but tailors it to allow raise or lower as preferred.
2018-03-11 09:48:02 -05:00
Scott Lahteine
d1256be7ec
FlushSerialRequestResend => flush_and_request_resend
2018-03-11 07:34:21 -05:00
Scott Lahteine
e8fc0e9a57
Move [xyz]_endstop_adj to Endstops class
2018-03-10 06:54:18 -06:00
Scott Lahteine
0d13c5d077
Fix position_is_reachable_by_probe, add comments
...
Fix #10029
2018-03-09 21:18:50 -06:00
Scott Lahteine
fa12866de3
Have position_is_reachable_by_probe use the whole bed ( #10019 )
...
Previously `position_is_reachable_by_probe` was limited to the area specified for `G29` mesh leveling (even if leveling was disabled). This change will properly consider the entire bed area so that `G30` and other non-leveling probing may take place.
2018-03-09 03:38:00 -06:00
Scott Lahteine
e5e3c3ff35
Update powersupply_on in power_on/off ( #10014 )
...
Fix #10004
2018-03-08 18:56:41 -06:00
Scott Lahteine
e7d519c898
Add suspend_auto_report flag to suppress auto-report
2018-03-07 01:58:37 -06:00
Scott Lahteine
890a396a2a
Import FilamentRunoutSensor with debounce ( #9947 )
2018-03-05 01:49:19 -06:00
Scott Lahteine
f0d8d76f68
Use static classes for job timers ( #9940 )
2018-03-04 22:52:25 -06:00
Scott Lahteine
742733d714
Un-pause on print cancellation ( #9779 )
2018-02-23 13:42:21 -06:00
Scott Lahteine
85162da0df
Fix Z value on HD44780 ( #9770 )
2018-02-23 00:42:55 -06:00
Scott Lahteine
ada40af5d6
Move <avr/pgmspace.h> include to MarlinConfig.h
...
For parity with 2.0.x, which includes pgmspace.h in the HAL.
2018-02-16 18:40:39 -06:00
Bob-the-Kuhn
15204bd5e9
Fix compile issue with USE_CONTROLLER_FAN ( #9665 )
2018-02-16 02:02:20 -06:00
Scott Lahteine
9dd8a49f82
Add pin_t to Marln 1.1 branch
2018-02-08 21:01:41 -06:00
Christopher Reimer
254417e8b0
Enable and disable power supply automatically
2018-02-06 00:20:33 -06:00
Scott Lahteine
21bfbb9d44
Apply standards for whole-file conditions
2018-02-04 21:17:03 -06:00
Scott Lahteine
3df0d62725
Updates to TMC support
2018-01-10 04:32:49 -06:00
Scott Lahteine
be555e3578
Move MBL functions into the class
2018-01-07 18:14:37 -06:00
Scott Lahteine
51977c64ee
Add a struct defining EEPROM storage
2018-01-05 15:47:51 -06:00
Scott Lahteine
e7bf7e6031
Make FWRetract class for 2.0.x parity
2018-01-04 17:54:24 -06:00
Thomas Moore
586d50ff99
Fix UBL compilation warnings
2018-01-02 19:41:02 -06:00
Thomas Moore
81193e9338
Add M701 / M702 filament load / unload
2017-12-30 19:48:21 -06:00
Scott Lahteine
b5677907d0
Minor speedup for SCARA scaling
...
And cleanup of Delta IK macros...
2017-12-21 22:39:06 -06:00
Scott Lahteine
4f375cd17d
Match sign for filwidth across vars
2017-12-20 00:17:32 -06:00
Scott Lahteine
e1b998e40a
More externs and functions in Marlin.h
2017-12-15 18:18:26 -06:00
Scott Lahteine
a20eacaa48
UBL devel debugging flag
2017-12-11 00:20:29 -06:00
Scott Lahteine
ccca1ade2d
Always report position on config load/reset
2017-12-10 23:05:33 -06:00
Scott Lahteine
5d01a2f467
Move temperature reporting to Temperature class
2017-12-06 21:12:55 -06:00
Roxy-3D
81e52138cc
More corrections for Bi-Linear to work with G26
2017-12-02 14:13:19 -06:00
Roxy-3D
a27a9b63e4
Get Bi_Linear macros correct to work with G26
...
G26 uses logic that looks like:
```
ex = _GET_MESH_X(i + 1) - (SIZE_OF_INTERSECTION_CIRCLES - (SIZE_OF_CROSSHAIRS));
```
The Bi-Linear macros need parenthesis to work correctly.
2017-12-02 14:04:41 -06:00
Scott Lahteine
8b7c274db5
Comment/cleanup motion code
2017-12-02 01:42:37 -06:00
Roxy-3D
8282d732c1
Make G26 work with all mesh leveling.
...
Example Configuration.h files are not updated yet. You need to cross
your settings over to the default Configuration.h file in the \Marlin
directory. (UBL_G26_MESH_VALIDATION enablement has moved to a new
location in the file.)
2017-11-23 21:41:27 -06:00
Scott Lahteine
622d100c30
No retroactive changes with M851 Z
2017-11-18 03:37:07 -06:00
RowanMeara
227b96b28b
Fix M428
...
This fixes the old implementation of M428 which was broken, did not
match the website, and made no sense.
2017-11-13 01:34:43 -06:00
Scott Lahteine
3293823642
Add pre-calculated planner.e_factor
2017-11-10 20:09:59 -06:00
Scott Lahteine
7aadfe32e7
Prevent position_is_reachable disaster
2017-11-10 19:17:45 -06:00
LVD-AC
8ce9306b27
PROBE_SELECTED etc.
2017-11-10 19:17:45 -06:00
Scott Lahteine
deaa70c2cc
Update macros for parity with 2.0.x
2017-11-10 04:32:27 -06:00
Thomas Moore
658e1ebe5a
Add delta_height variable in lieu of using home_offset
2017-11-08 23:21:02 -06:00
Scott Lahteine
8ab368559a
Implement CNC_COORDINATE_SYSTEMS
2017-11-04 22:30:23 -05:00
