Bernhard
415aadf704
lcd panel bed support
...
advance and ultipanel not any more in default config
2011-12-22 11:45:52 +01:00
Erik van der Zalm
84d9cf7339
merging
2011-12-12 20:35:46 +01:00
Erik van der Zalm
e017228569
Merged multiple extruder support.
...
Soft PWM. (Sanguinololu can also have PID temperature control)
Interrupt save WRITE for addresses > 0x0FF
2011-12-12 19:34:37 +01:00
Bernhard
88ee053af0
heating up santity, formarly knows as "watchdog", but renamed due to the existance of the real watchdog, works now.
2011-12-09 17:07:44 +01:00
Denis B
4fd75dc813
Working version of multiple extruders (up to 3)
...
- The temperature control is pretty much complete
(not sure what to do w/ autotemp though)
Changed the pins assignment to clearly separate bed and extruder heaters
and temp sensors, changed a bit how termistor tables are handled.
- The steppers control is rudimentary
(only chanages what pins it uses depending on the active_extruder var,
but that's enough for switching extruder in the start.gcode in the
the profiles)
- Tested only w/ RAMPS 1.4
2011-12-06 00:09:16 -05:00
Bernhard
7714b98da7
solved some compiler warnings that are now visible in arduino 1.0.
...
Found a couple of unused variables, that I commented.
Tried to solve the program memory warning message, and failed.
2011-12-04 12:40:18 +01:00
Bernhard
59205ac5fc
preliminiary implementation for the early heating finish.
...
Might be replaced by something more clever, e.g. by erik, and does not yet support the second extruder or the bed.
its kind of not so cool, because you need 6 more ints.
Maybe isheating() should use the degrees directly, as it is not used in time-critical anyways.
Then it would be much easier. to have the offsets without additional variables.
2011-11-30 08:51:46 +01:00
Erik van der Zalm
dd5296ad4d
Fixed temperature reading bug.
...
(When using the lower and upper adc input bank)
2011-11-28 17:42:49 +01:00
Erik van der Zalm
959d82e81e
Small temperature disable bug.
2011-11-20 15:03:35 +01:00
Erik van der Zalm
2e43f9c809
Changed min max temperature code.
2011-11-20 13:14:58 +01:00
Erik van der Zalm
6841a10446
Fixed max/min temperature bug
2011-11-19 16:16:26 +01:00
Erik van der Zalm
ff69e0a772
Changed max/min temp init. Removed second uart from sabguino core
2011-11-19 12:19:53 +01:00
Bernhard Kubicek
a9c7da06e3
and changed ultipanel to have the mm/sec and not mm/min
...
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
Conflicts:
Marlin/Marlin.pde
Marlin/ultralcd.h
2011-11-15 22:50:43 +01:00
Bernhard Kubicek
c57906b627
fixed bug with adjusting ki in realtime.
2011-11-13 21:43:26 +01:00
Bernhard Kubicek
ff592b056a
heater power repair.
2011-11-13 00:48:55 +01:00
Bernhard Kubicek
e9adfa27b5
re-enabled heaterpower as storage for the current storage of the heater PWM duty cycle.
...
the M301 now returns the current PID settings of the machine.
M105 returns heating pwm duty cylce as "@:"
2011-11-12 20:37:28 +01:00
Bernhard Kubicek
ba8a53a40f
Streaming.h is gone. It conflicted with PROGMEM. And saving memory is more important than nicer code, imho
2011-11-09 20:30:41 +01:00
Bernhard Kubicek
ab154d5592
project progmem finished: total change with ultipanel: 2456 byte free ram initial. now: 4374 ram.
2011-11-09 20:27:44 +01:00
Bernhard Kubicek
72ace55e6a
better visibility of public/private/imported variables
2011-11-06 23:34:40 +01:00
Erik van der Zalm
e3af73ee0c
Thermistor name problem
2011-11-06 23:20:01 +01:00
Bernhard Kubicek
79d1bfb5c0
made many possible variables static, so they cannot be used extern.
2011-11-06 19:36:29 +01:00
Bernhard Kubicek
1d171e9e52
reformating and some minor bugs/things found on the way.
2011-11-06 19:23:08 +01:00
Bernhard Kubicek
900e0c9bf2
overworked the serial responses. Quite difficult, since many texts are Pronterface protocol.
2011-11-06 17:33:09 +01:00
Bernhard Kubicek
1740a83e11
correcting commit errors.
2011-11-06 15:10:29 +01:00
Bernhard Kubicek
2afb7bd4cf
refactured temperature.cpp so that there are now abstract functions to access temperatures.
2011-11-06 14:03:41 +01:00
Erik van der Zalm
2e8e8878e5
Corrected temp variables.
2011-11-05 20:21:09 +01:00
Erik van der Zalm
04d3b5537f
Merge remote-tracking branch 'origin/Marlin_v1' into Marlin_v1
...
Conflicts:
Marlin/Configuration.h
Marlin/EEPROMwrite.h
Marlin/Marlin.h
Marlin/Marlin.pde
Marlin/temperature.cpp
Marlin/temperature.h
Marlin/thermistortables.h
2011-11-05 20:03:38 +01:00
Erik van der Zalm
d15f01e1b4
Temperature changes
2011-11-05 19:21:36 +01:00
Bernhard Kubicek
ea86a5e10f
moved the variables in the ISR, thats the most normal use case of static.
2011-11-05 16:53:37 +01:00
Bernhard Kubicek
b9ea0651ec
Revert "this is not working. Do you maybe know why?"
...
This reverts commit 8bcdb9f5f0
2011-11-05 16:49:29 +01:00
Bernhard Kubicek
8bcdb9f5f0
this is not working. Do you maybe know why?
2011-11-05 16:43:44 +01:00
Bernhard Kubicek
40e8081623
changed end of line to windows, which seems to be the majority of developers main platform.
2011-11-05 14:19:57 +01:00
Bernhard Kubicek
00674af3a8
merge from the branch bkubicek/Marlin/zalmmerge
2011-11-05 14:13:20 +01:00
Erik van der Zalm
bf879ceaa9
Added thermistor tables
2011-11-04 22:51:14 +01:00
Erik van der Zalm
094afe7c10
Merged Marlin, Marlin non gen6 and Ultimaker changes
2011-11-04 18:02:56 +01:00
