Giuliano Zaro
773fa5c40f
Fix define used when PID is off ( #13119 )
...
Replaced `PID_MAX` with `BANG_MAX` since it should be the correct define to be used when PID is not enabled.
2019-02-11 17:29:17 -06:00
Simon Jouet
5cd0fa3ce1
Basic GPIO expander using the ESP32 I2S peripheral ( #12959 )
2019-02-10 05:40:31 -06:00
Scott Lahteine
6de3d34378
M166 Gradients, LCD Menu for 2-channel Mixer (Geeetech A10M/A20M) ( #13022 )
2019-02-10 04:54:23 -06:00
LinFor
7ee35c2611
PID_MENU option to save PROGMEM in LCD menus ( #13095 )
2019-02-10 04:03:18 -06:00
AnHardt
0e37fe8776
Apply minimum C in M303 ( #13113 )
...
Apply minimum `C` in `M303`. `PID_autotune()` needs to be called with a 'C'ycles-parameter >2 to give meaningful (different from 0) PID-factors. Therefore silently raise C to 3. Fixing one aspect of #13104
2019-02-10 03:54:45 -06:00
Marcio Teixeira
e1604198ff
G425 — Auto-calibrate Backlash and Nozzle Offsets ( #13050 )
2019-02-06 17:20:17 -06:00
InsanityAutomation
413e303ad5
More Advanced Pause options ( #12984 )
2019-02-06 06:39:42 -06:00
teemuatlut
d81342254a
Support new TMC drivers ( #13026 )
2019-02-06 06:33:14 -06:00
Rolf Werum
524c6c10bf
MAGNETIC_PARKING_EXTRUDER ( #12351 )
2019-02-06 06:30:53 -06:00
Scott Lahteine
1bd9a63049
Add HAS_EXTRA_ENDSTOPS macro
2019-02-06 05:10:05 -06:00
Scott Lahteine
3c49396370
Fix compile error with DUE + MAX6675 ( #13086 )
2019-02-05 22:56:13 -06:00
Sam Lane
b35a7c2c87
Fixed closed-loop planner stall ( #13005 )
2019-02-04 07:43:09 -06:00
Nathan
df1043516e
Fix the delta homing issue ( #12974 )
2019-02-04 05:25:50 -06:00
Scott Lahteine
4200bd2fc1
Report on M92 with no arguments ( #12833 )
2019-02-04 05:24:15 -06:00
Scott Lahteine
d4d1b28a06
Fix some include paths
2019-02-04 03:57:15 -06:00
Marcio Teixeira
5cfc1cdacc
Support SWITCHING_NOZZLE with 2 servos ( #13054 )
2019-02-04 00:19:56 -06:00
Nicolas G
6fb4001b58
Add option to disable fan speed slowing in M303 ( #13066 )
2019-02-04 00:12:41 -06:00
Mark Zachmann
4d1093b386
Fix init of last_direction_bits ( #13067 )
2019-02-03 01:29:00 -06:00
Scott Lahteine
4fa1c52688
Tweak serial output code
2019-02-03 01:09:14 -06:00
Scott Lahteine
a5e3384691
Pre-apply cosmetic changes to mixing
2019-02-03 01:09:14 -06:00
Scott Lahteine
0358ffcd4c
Drop E element from homing_feedrate_mm_s
2019-02-02 15:55:00 -06:00
Scott Lahteine
95223cb28e
Remove dead code from stepper.h
...
These values are always supplied by `Conditionals_post.h`.
2019-02-02 15:35:05 -06:00
mattfredwill
c3cb449990
TMC2130 dual-stepper Sensorless Homing ( #13061 )
2019-02-01 18:09:01 -06:00
revilor
6a57d0b381
Prusa MMU2 ( #12967 )
2019-01-31 19:10:52 -06:00
jeffstaley
0da636e1a3
Set correct stepper direction on reset ( #13032 )
...
On a reset steppers were being initialized to incorrect direction. Original code wasn't respecting `INVERT_Z_DIR` define.
2019-01-27 23:02:38 -06:00
Jiri
24fffb8d93
Fix undefined lcd_tmpfan_speed on NO_LCD_MENUS ( #13006 )
2019-01-24 16:34:40 -06:00
InsanityAutomation
f4d1f13358
Warn on cold extrusion, dont error
2019-01-24 00:16:14 -06:00
Bob Kuhn
2f35747f29
L6470 SPI daisy chain support ( #12895 )
2019-01-23 19:06:54 -06:00
Ludy
dc65d96aca
Fix TMC compile error ( #12965 )
2019-01-20 23:47:28 -06:00
Scott Lahteine
0495fcd475
Minor spacing fix
2019-01-20 00:10:50 -06:00
teemuatlut
8a3f1d6932
Fix chopper timing struct and initialization ( #12943 )
2019-01-19 18:57:02 -06:00
Ludy
acf266fe78
Fix a compile warning, etc. ( #12955 )
2019-01-19 18:47:29 -06:00
Scott Lahteine
712e23c383
Fix up some whitespace
2019-01-17 18:05:36 -06:00
teemuatlut
e6805582a6
M569 to change stepping mode. Add new TMC section to LCD. ( #12884 )
2019-01-17 13:17:16 -06:00
mikeshub
7fde8d9d1e
Add CreatorPro / Makerbot / QIDI / etc and Mightboard RevE support ( #12855 )
...
- Fix a bug in MAXxxxx thermocouple temp reporting.
- Add support for 3-wire HD44780.
- Add support for PCA9533 RGB driver.
- Add configuration examples for FlashForge CreatorPro.
2019-01-14 14:29:55 -06:00
InsanityAutomation
082f6a27de
ADAPTIVE_FAN_SLOWING extension to hotend thermal protection ( #12853 )
2019-01-12 00:41:48 -06:00
Scott Lahteine
459f4fef60
Fix Temperature::init bug with HEATER_4_PIN
2019-01-11 22:54:26 -06:00
Scott Lahteine
19fea772e5
Use E_AXIS_N where it makes sense
2019-01-11 19:42:34 -06:00
HackingGulliver
1fd8e2c649
Fix: Junction Deviation calculates wrong cos(theta) on CoreXY ( #12879 )
2019-01-11 19:25:48 -06:00
Marcio Teixeira
6a8fb0f25f
Simplify backlash compensation code. ( #12813 )
...
- Use `TEST(dm,axis)` to determine directions instead of doing comparisons.
- Remove recomputation of `millimeters` and `delta_mm` since backlash compensation should not affect the distance over which material is extruded.
2019-01-04 13:30:56 -06:00
Marcio Teixeira
81e753064a
Fix ExtUI compile warnings and error ( #12799 )
2019-01-03 08:36:43 -06:00
TheLongAndOnly
cb643d87df
Adding missing code for triple Z-stepper auto-align ( #12786 )
2019-01-01 18:22:04 -06:00
Marcio Teixeira
60cb36bef3
Misc. improvements ( #12747 )
...
* Make ExtUI respect MAXTEMP limits
- Temperatures are now clamped by MAXTEMP limits rather than arbitrary values.
* Speed up USB init, add status
- Speed up USB initialization
- Show status message if init failed
* Enable status messages for EXTENSIBLE_UI
* Adjust max limit to MAX_TEMP - 15
* Misc. tweaks to formatting, const, etc.
2019-01-01 15:17:48 -06:00
Scott Lahteine
371d9a1acf
Fix line-endings, formatting, whitespace
...
Followup to #12770
2018-12-30 15:38:20 -06:00
Ludy
135c74017c
Fix compile DEBUG_EEPROM_READWRITE error ( #12746 )
2018-12-30 11:37:20 -06:00
Ludy
3877bf9704
Fix compile error with delta and sensorless homing ( #12740 )
2018-12-27 17:51:22 -06:00
Ludy
cfc5e96b4b
Move JD to Config.h (and fix jerk->eeprom bug) ( #12720 )
2018-12-27 15:29:39 -06:00
Roman Moravčík
594898aea7
Limit hotend / bed temperature to maxtemp-15 ( #12713 )
2018-12-27 11:46:05 -06:00
InsanityAutomation
367a9f65aa
Add Formbot 350c Thermistor ( #12661 )
2018-12-20 17:04:17 -06:00
Scott Lahteine
9d59a9c840
Followup to #12691 (typo)
2018-12-20 16:38:32 -06:00
