Scott Lahteine
2f223b8c79
Use ABC and XYZ for "3"
2016-08-21 00:10:08 -05:00
Scott Lahteine
d8f2876753
Replace some float division with multiplication
2016-07-24 13:27:50 -07:00
Scott Lahteine
f8b5749235
Replace division in planner with multiplication
2016-07-24 13:27:49 -07:00
Scott Lahteine
176b9627c7
Some cleanup ahead of BLTOUCH support
2016-07-17 13:55:38 -07:00
Scott Lahteine
05da02f0a2
Implement MIXING_EXTRUDER and SWITCHING_EXTRUDER
2016-07-17 10:53:10 -07:00
Scott Lahteine
4b4a582c4f
X_DUAL_STEPPER_DRIVERS implementation
2016-07-11 10:22:19 -07:00
Scott Lahteine
bd491818d6
Reduce storage requirements for strings, make some PGM
2016-06-27 20:36:18 -07:00
Scott Lahteine
61f34eec03
Merge pull request #4125 from jbrazio/bugfix/planner-warning
...
Fixes some compiler warnings
2016-06-22 19:34:37 -07:00
João Brázio
664232140d
Fixes somes compiler warnings
2016-06-23 03:12:55 +01:00
Sebastianv650
0c5192b288
Patch LIN_ADVANCE timing issue
...
Also the extruder stepper ISR has to keep an eye on step_loops count.
2016-06-22 19:05:14 -07:00
Scott Lahteine
8d8180e028
Parse M905 args in Marlin_main.cpp
2016-06-13 19:25:28 -07:00
Scott Lahteine
2b340f5acb
patch LIN_ADVANCE to use code_value_float
2016-06-13 18:54:25 -07:00
Scott Lahteine
aad9c0ed8d
Apply updated ISR timing code
2016-06-09 21:03:27 -07:00
Scott Lahteine
506d78b2f8
Run the advance_isr faster instead of doing multiple e-steps per interrupt
2016-06-09 21:03:27 -07:00
Scott Lahteine
6d62a4ffc8
Patch LIN_ADVANCE for style and forward-compatibility
2016-06-09 21:03:27 -07:00
Sebastianv650
fb8e880734
Add LIN_ADVANCE
2016-06-09 21:03:27 -07:00
Scott Lahteine
72c6f2923f
axis_steps_per_unit => axis_steps_per_mm
2016-06-09 17:04:51 -07:00
Scott Lahteine
e2a8961635
Use e_steps[EXTRUDERS] instead of e_steps[4]
2016-06-05 01:44:53 -07:00
Scott Lahteine
668d50f68e
Keep Stepper encapsulation, use static data and methods
2016-05-30 16:24:04 -07:00
Scott Lahteine
5172d4ba40
COREYZ stepper, planner, endstop, babysteps
2016-05-23 13:58:40 -07:00
Scott Lahteine
07c9a11c3c
Automatically set X2 stepper pins
2016-05-18 19:09:09 -07:00
Scott Lahteine
15fc93d742
Cleanup and consolidate probe conditionals for clarity
2016-05-08 12:59:43 -07:00
Scott Lahteine
6398d497b3
Ultimate followup to Stepper/Planner patch
...
- Search all symbols and apply prefixes where needed
- Encapsulate some private methods
- Inline some setters
- Make `microstep_mode` a public method
2016-05-03 17:07:37 -07:00
Scott Lahteine
96f51f400f
Planner singleton class
2016-04-30 17:26:50 -07:00
Scott Lahteine
5e4e535ce8
Stepper and Endstops as singleton objects
2016-04-30 17:26:50 -07:00
João Brázio
bcf1e027bb
Fix the redeclaration of _ENDSTOP_HIT
2016-04-17 18:37:37 +01:00
Scott Lahteine
7c16e774ca
Show all endstops on LCD in checkHitEndstops
2016-04-16 20:08:42 -07:00
Scott Lahteine
3e5312f116
CORE support for st_set_position & plan_set_position
2016-04-11 15:13:42 -07:00
Scott Lahteine
e087a99a10
Some cleanup of st_get_pos functions
2016-04-11 15:13:42 -07:00
Scott Lahteine
dc19b69697
No casting needed for SERIAL_ECHOPAIR
2016-04-07 16:33:21 -07:00
esenapaj
7950b5268a
Use SBI macro
2016-03-26 20:17:52 +09:00
Scott Lahteine
5d8036e554
Code cleanup around MOTOR_CURRENT_PWM options
2016-03-25 04:23:46 -07:00
Scott Lahteine
0da744b7b0
Further cleanup of comments, partial Doxygen-style
...
Following up on #3231
2016-03-25 00:45:56 -07:00
jbrazio
5e5d250832
Added gplv3 header to all Marlin files
2016-03-24 18:01:20 +00:00
Scott Lahteine
af32a7d5d6
M120/M121 also set endstops non-homing state
2016-03-24 03:24:23 -07:00
Scott Lahteine
c5857f96c8
Merge pull request #3182 from thinkyhead/rcbugfix_printrboard_revf
...
Add support for Printrboard RevF
2016-03-24 00:12:06 -07:00
Scott Lahteine
59483221d5
Move stepper DAC to a separate file
2016-03-19 19:24:26 -07:00
Scott Lahteine
5d0570cea0
Make digitalPotWrite depend on HAS_DIGIPOTSS
2016-03-19 19:24:26 -07:00
Stephanie
6843b78f99
Add support for Printrboard RevF
...
The PrintrBoard Rev F utilizes a mcp4728 DAC to set motor current. Printrbot's implementation utilizes 2 new M-codes to set and write the DAC settings to the DAC EEPROM: `M909` (Read DAC) and `M910` (Write DAC). `M907` is re-used to set value, `M908` for direct control.
The Pins file for the RevF board is included.
2016-03-19 16:43:37 -07:00
AnHardt
3f45a1acf9
Check probes only when deployed
...
Aim: Test probes in update_endstops only when activated
Changes:
Configurations
Add define for FIX_MOUNTED_PROBE to handle the situation where formerly ENDSTOPS_ONLY_FOR_HOMING had to be set, or lowering the nozzle below Z_PROBE_OFFSET_FROM_EXTRUDER could give an "endstop hit" message.
Add define for Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN to indicate a common situation, that we have a probe but it is connected to an endstop pin
Add some comments
Shift some entries to have related things together.
Conditionals.h
We have a probe (HAS_Z_MIN_PROBE) if one of the pins is defined AND one of the probes is defined.
SanityCheck.h
Add some tests if the probe is connected and if we have defined a probe.
stepper.cpp
Changes to test the probe only when it is deployed (z_probe_is_active).
Test update_endstops() when the probe is deployed.
MarlinMain.cpp
a. set and reset z_probe_is_active in deploy_z_probe(), stow_z_probe() and dock_sled()
b. set and reset z_probe_is_active in the case a z-servo is moved to a defined position. The only remaining unhandled servo move is in M280 where we do not end in a defined position. If you want to handle a probe use M401/402
c. skip deploying/stowing when already deployed/stowed in the dedicated deploy/stow functions.
d. Handle the new FIX_MOUNTED_PROBE in parallel to a servo driven probe/endstop.
To do: In another PR. handle all probes in deploy/stow_z_probe.
Sort out SERVO_LEVELING vs. HAS_SERVO_ENDSTOPS.
2016-03-19 02:00:08 -07:00
Scott Lahteine
4634feaeab
Merge pull request #3012 from thinkyhead/fix_command_injection
...
Use a serial line buffer to prevent queue corruption
2016-03-19 01:43:54 -07:00
Scott Lahteine
e5fd43f343
Implement BABYSTEPPING for COREXY and COREXZ
2016-03-18 18:22:53 -07:00
Scott Lahteine
8fe7420310
Use a separate serial line buffer
2016-03-18 16:46:20 -07:00
Alexander Leisentritt
4338813814
save last extruder and set stepper directions too in case the extruder changed
...
fixes MarlinFirmware/Marlin#3144 and MarlinFirmware/Marlin#3083
2016-03-16 20:20:34 +01:00
Scott Lahteine
6e1bc03d3b
Additional wrapping for #3140
2016-03-15 01:18:58 -07:00
Scott Lahteine
0c48eaf3de
Expose motor current in more configs, disable by default
2016-03-11 02:25:36 -08:00
Elijah Snyder
e8b10d2836
Adding PWM_MOTOR_CURRENT flag to help expose PWM_MOTOR_CURRENTS in Configuration_adv.h similar to DIGIPOT_MOTOR_CURRENT
2016-03-11 02:25:36 -08:00
Scott Lahteine
3fd31976c3
Reduce code in stepper.cpp with macros
2016-03-10 01:42:58 -08:00
Scott Lahteine
ff13070b59
Use _BV macros, patch up others
2016-03-06 05:51:55 -08:00
Scott Lahteine
373e8a1ad4
Fixes for COREXY and COREXZ coordinates
2016-02-15 15:59:24 -08:00
