| .. |
|
example_configurations
|
[1.1.x] BLTOUCH_V3 parity with 2.0.x (#13682)
|
2019-04-15 16:33:11 -05:00 |
|
bitmap_flags.h
|
|
|
|
blinkm.cpp
|
|
|
|
blinkm.h
|
|
|
|
boards.h
|
Prevent MB false-positive on bad board name
|
2018-06-08 19:57:31 -05:00 |
|
buzzer.h
|
|
|
|
cardreader.cpp
|
Add M524 to abort SD printing (#11386)
|
2018-10-19 14:23:46 -05:00 |
|
cardreader.h
|
Add M524 to abort SD printing (#11386)
|
2018-10-19 14:23:46 -05:00 |
|
circularqueue.h
|
|
|
|
Conditionals_LCD.h
|
[1.1.x] BLTOUCH_V3 parity with 2.0.x (#13682)
|
2019-04-15 16:33:11 -05:00 |
|
Conditionals_post.h
|
UBL G29 T current position fix (#12845)
|
2019-02-26 22:26:21 -06:00 |
|
Conditionals.h
|
|
|
|
Configuration_adv.h
|
Update some config comments
|
2018-09-15 23:17:59 -05:00 |
|
configuration_store.cpp
|
Apply lowercase to some common methods
|
2019-02-02 16:45:07 -06:00 |
|
configuration_store.h
|
Unsigned eeprom mesh addresses
|
2018-06-15 15:54:42 -05:00 |
|
Configuration.h
|
[1.1.x] BLTOUCH_V3 parity with 2.0.x (#13682)
|
2019-04-15 16:33:11 -05:00 |
|
dac_mcp4728.cpp
|
|
|
|
dac_mcp4728.h
|
|
|
|
delay.h
|
Better handling of DELAY_NS and DELAY_US (#10717)
|
2018-05-12 04:22:55 -05:00 |
|
digipot_mcp4018.cpp
|
Float maths updates for 2.0.x parity (#11213)
|
2018-07-06 21:44:33 -05:00 |
|
digipot_mcp4451.cpp
|
Float maths updates for 2.0.x parity (#11213)
|
2018-07-06 21:44:33 -05:00 |
|
dogm_bitmaps.h
|
Make sure FAN_ANIM_FRAMES is defined
|
2018-05-25 05:25:42 -05:00 |
|
dogm_font_data_6x9_marlin.h
|
|
|
|
dogm_font_data_HD44780_C.h
|
|
|
|
dogm_font_data_HD44780_J.h
|
|
|
|
dogm_font_data_HD44780_W.h
|
|
|
|
dogm_font_data_ISO10646_1_PL.h
|
|
|
|
dogm_font_data_ISO10646_1_tr.h
|
|
|
|
dogm_font_data_ISO10646_1.h
|
|
|
|
dogm_font_data_ISO10646_5_Cyrillic.h
|
|
|
|
dogm_font_data_ISO10646_CN.h
|
|
|
|
dogm_font_data_ISO10646_CZ.h
|
|
|
|
dogm_font_data_ISO10646_Greek.h
|
|
|
|
dogm_font_data_ISO10646_Kana.h
|
|
|
|
dogm_font_data_ISO10646_SK.h
|
|
|
|
dogm_font_data_Marlin_symbols.h
|
|
|
|
drivers.h
|
Improve AXIS_DRIVER_TYPE macros
|
2018-08-13 16:50:24 -05:00 |
|
duration_t.h
|
Use static classes for job timers (#9940)
|
2018-03-04 22:52:25 -06:00 |
|
emergency_parser.cpp
|
Update emergency_parser for 2.0.x parity (#10530)
|
2018-04-25 22:42:43 -05:00 |
|
emergency_parser.h
|
Update emergency_parser for 2.0.x parity (#10530)
|
2018-04-25 22:42:43 -05:00 |
|
endstop_interrupts.h
|
Filter endstops state at all times (#11076)
|
2018-06-21 20:13:16 -05:00 |
|
endstops.cpp
|
Fix garbled M119 output, honor NUM_RUNOUT_SENSORS
|
2018-09-28 19:19:45 -05:00 |
|
endstops.h
|
Easier to disable homing validation (#11457)
|
2018-08-06 23:11:28 -05:00 |
|
enum.h
|
[1.1.x] Hangprinter support (#9180)
|
2018-09-08 21:17:02 -05:00 |
|
fastio_168.h
|
remove MARLIN line , change to logical pin (#10163)
|
2018-03-20 16:24:17 -05:00 |
|
fastio_644.h
|
remove MARLIN line , change to logical pin (#10163)
|
2018-03-20 16:24:17 -05:00 |
|
fastio_1280.h
|
[1.1.x] Update fastio_1280.h pin mapping comments (#11374)
|
2018-07-26 05:19:05 -05:00 |
|
fastio_1281.h
|
remove MARLIN line , change to logical pin (#10163)
|
2018-03-20 16:24:17 -05:00 |
|
fastio_AT90USB.h
|
remove MARLIN line , change to logical pin (#10163)
|
2018-03-20 16:24:17 -05:00 |
|
fastio.h
|
Add HAL.h for AVR for easier 2.0.x parity
|
2018-05-20 21:24:57 -05:00 |
|
fwretract.cpp
|
[1.1.x] Hangprinter support (#9180)
|
2018-09-08 21:17:02 -05:00 |
|
fwretract.h
|
[1.1] FWRetract Reset (Best way) (#10084)
|
2018-03-14 01:34:15 -05:00 |
|
G26_Mesh_Validation_Tool.cpp
|
[1.1.x] Hangprinter support (#9180)
|
2018-09-08 21:17:02 -05:00 |
|
HAL.h
|
Remove obsolete HAL_timer_restrain
|
2018-08-31 17:49:26 -05:00 |
|
hex_print_routines.cpp
|
Update includes for gcode.h => parser.h
|
2018-03-14 01:01:45 -05:00 |
|
hex_print_routines.h
|
|
|
|
I2CPositionEncoder.cpp
|
Float maths updates for 2.0.x parity (#11213)
|
2018-07-06 21:44:33 -05:00 |
|
I2CPositionEncoder.h
|
Float maths updates for 2.0.x parity (#11213)
|
2018-07-06 21:44:33 -05:00 |
|
language_an.h
|
Add M915 to Prepare Menu (#11383)
|
2018-07-31 02:03:49 -05:00 |
|
language_bg.h
|
Add M915 to Prepare Menu (#11383)
|
2018-07-31 02:03:49 -05:00 |
|
language_ca.h
|
Add M915 to Prepare Menu (#11383)
|
2018-07-31 02:03:49 -05:00 |
|
language_cn.h
|
Add M915 to Prepare Menu (#11383)
|
2018-07-31 02:03:49 -05:00 |
|
language_cz_utf8.h
|
[1.1.x] Update Czech translation (#12684)
|
2018-12-20 15:32:24 -06:00 |
|
language_cz.h
|
[1.1.x] Update Czech translation (#12684)
|
2018-12-20 15:32:24 -06:00 |
|
language_da.h
|
Add M915 to Prepare Menu (#11383)
|
2018-07-31 02:03:49 -05:00 |
|
language_de.h
|
[1.1.x] Fix German language (#13438)
|
2019-03-20 16:38:43 -05:00 |
|
language_el-gr.h
|
Add M915 to Prepare Menu (#11383)
|
2018-07-31 02:03:49 -05:00 |
|
language_el.h
|
Add M915 to Prepare Menu (#11383)
|
2018-07-31 02:03:49 -05:00 |
|
language_en.h
|
[1.1.x] BLTOUCH_V3 parity with 2.0.x (#13682)
|
2019-04-15 16:33:11 -05:00 |
|
language_es_utf8.h
|
Add M915 to Prepare Menu (#11383)
|
2018-07-31 02:03:49 -05:00 |
|
language_es.h
|
Fix spanish translations (#13235)
|
2019-02-22 19:49:01 -06:00 |
|
language_eu.h
|
Add M915 to Prepare Menu (#11383)
|
2018-07-31 02:03:49 -05:00 |
|
language_fi.h
|
Add M915 to Prepare Menu (#11383)
|
2018-07-31 02:03:49 -05:00 |
|
language_fr_utf8.h
|
Make some small corrections in fr_utf8 language file. (#11826)
|
2018-09-16 00:06:53 -05:00 |
|
language_fr.h
|
Update French language (#12246)
|
2018-10-27 17:19:51 -05:00 |
|
language_gl.h
|
Add M915 to Prepare Menu (#11383)
|
2018-07-31 02:03:49 -05:00 |
|
language_hr.h
|
Add M915 to Prepare Menu (#11383)
|
2018-07-31 02:03:49 -05:00 |
|
language_it.h
|
Add M915 to Prepare Menu (#11383)
|
2018-07-31 02:03:49 -05:00 |
|
language_kana_utf8.h
|
Add M915 to Prepare Menu (#11383)
|
2018-07-31 02:03:49 -05:00 |
|
language_kana.h
|
Add M915 to Prepare Menu (#11383)
|
2018-07-31 02:03:49 -05:00 |
|
language_nl.h
|
Add M915 to Prepare Menu (#11383)
|
2018-07-31 02:03:49 -05:00 |
|
language_pl-DOGM.h
|
Add M915 to Prepare Menu (#11383)
|
2018-07-31 02:03:49 -05:00 |
|
language_pl-HD44780.h
|
Add M915 to Prepare Menu (#11383)
|
2018-07-31 02:03:49 -05:00 |
|
language_pl.h
|
|
|
|
language_pt_utf8.h
|
Add M915 to Prepare Menu (#11383)
|
2018-07-31 02:03:49 -05:00 |
|
language_pt-br_utf8.h
|
Add M915 to Prepare Menu (#11383)
|
2018-07-31 02:03:49 -05:00 |
|
language_pt-br.h
|
Fix language_pt-br warnings due to extra tokens at end of #else directive (#13084)
|
2019-02-05 22:56:53 -06:00 |
|
language_pt.h
|
Add M915 to Prepare Menu (#11383)
|
2018-07-31 02:03:49 -05:00 |
|
language_ru.h
|
Add M915 to Prepare Menu (#11383)
|
2018-07-31 02:03:49 -05:00 |
|
language_sk_utf8.h
|
Add M915 to Prepare Menu (#11383)
|
2018-07-31 02:03:49 -05:00 |
|
language_test.h
|
|
|
|
language_tr.h
|
Add M915 to Prepare Menu (#11383)
|
2018-07-31 02:03:49 -05:00 |
|
language_uk.h
|
Add M915 to Prepare Menu (#11383)
|
2018-07-31 02:03:49 -05:00 |
|
language_zh_CN.h
|
Add M915 to Prepare Menu (#11383)
|
2018-07-31 02:03:49 -05:00 |
|
language_zh_TW.h
|
Add M915 to Prepare Menu (#11383)
|
2018-07-31 02:03:49 -05:00 |
|
language.h
|
Support more filament runout sensors in M119 (#11850)
|
2018-09-17 03:29:18 -05:00 |
|
least_squares_fit.cpp
|
Smarter MIN, MAX, ABS macros
|
2018-05-13 04:51:33 -05:00 |
|
least_squares_fit.h
|
Smarter MIN, MAX, ABS macros
|
2018-05-13 04:51:33 -05:00 |
|
leds.cpp
|
|
|
|
leds.h
|
|
|
|
M100_Free_Mem_Chk.cpp
|
Creality3D Power-Loss Recovery
|
2018-04-21 21:30:25 -05:00 |
|
macros.h
|
[1.1.x] Hangprinter support (#9180)
|
2018-09-08 21:17:02 -05:00 |
|
Makefile
|
Marlin assumes signed chars
|
2018-08-16 21:18:20 -05:00 |
|
malyanlcd.cpp
|
Sync enqueue_and_echo_command with 2.0.x
|
2018-07-25 18:06:31 -05:00 |
|
Marlin_main.cpp
|
[1.1.x] BLTOUCH_V3 parity with 2.0.x (#13682)
|
2019-04-15 16:33:11 -05:00 |
|
Marlin.h
|
[1.1.x] Hangprinter support (#9180)
|
2018-09-08 21:17:02 -05:00 |
|
Marlin.ino
|
Bring some configs up to date
|
2018-09-05 04:34:09 -05:00 |
|
MarlinConfig.h
|
Fix drivers.h dependency, defer macro evaluation (#11449)
|
2018-08-03 21:48:57 -05:00 |
|
MarlinSerial.cpp
|
Fix MarlinSerial (#10992)
|
2018-06-10 20:04:52 -05:00 |
|
MarlinSerial.h
|
Add hidden Serial debug options
|
2018-06-09 22:23:10 -05:00 |
|
MarlinSPI.h
|
|
|
|
Max7219_Debug_LEDs.cpp
|
Fix up Max7219 orientations (#11597)
|
2018-08-20 20:31:40 -05:00 |
|
Max7219_Debug_LEDs.h
|
Fix up Max7219 orientations (#11597)
|
2018-08-20 20:31:40 -05:00 |
|
mesh_bed_leveling.cpp
|
|
|
|
mesh_bed_leveling.h
|
Float maths updates for 2.0.x parity (#11213)
|
2018-07-06 21:44:33 -05:00 |
|
neopixel.cpp
|
|
|
|
neopixel.h
|
|
|
|
nozzle.cpp
|
Sanity-check NOZZLE_PARK_POINT
|
2018-09-05 06:18:59 -05:00 |
|
nozzle.h
|
|
|
|
parser.cpp
|
Fix M118 parameter handling
|
2018-04-12 19:06:41 -05:00 |
|
parser.h
|
Make GCodeParser::debug static (#11294)
|
2018-07-17 23:38:39 -05:00 |
|
pca9632.cpp
|
Fix pca9632_set_led_color lost i2c connection (#11530)
|
2018-08-12 18:05:00 -05:00 |
|
pca9632.h
|
|
|
|
pins_3DRAG.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_5DPRINT.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_ANET_10.h
|
Optional ADC_KEYPAD pin with ANET_10 (#13158)
|
2019-02-13 20:50:11 -06:00 |
|
pins_AZTEEG_X1.h
|
|
|
|
pins_AZTEEG_X3_PRO.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_AZTEEG_X3.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_BAM_DICE_DUE.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_BQ_ZUM_MEGA_3D.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_BRAINWAVE_PRO.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_BRAINWAVE.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_CHEAPTRONIC.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_CHEAPTRONICv2.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_CNCONTROLS_11.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_CNCONTROLS_12.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_EINSY_RAMBO.h
|
Allow Einsy RAMBo FAN1_PIN override
|
2018-08-13 02:48:25 -05:00 |
|
pins_EINSY_RETRO.h
|
Simplify stepper driver config
|
2018-07-25 03:02:12 -05:00 |
|
pins_ELEFU_3.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_FELIX2.h
|
|
|
|
pins_GEN3_MONOLITHIC.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_GEN3_PLUS.h
|
|
|
|
pins_GEN6_DELUXE.h
|
|
|
|
pins_GEN6.h
|
|
|
|
pins_GEN7_12.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_GEN7_13.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_GEN7_14.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_GEN7_CUSTOM.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_GT2560_REV_A_PLUS.h
|
|
|
|
pins_GT2560_REV_A.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_K8200.h
|
|
|
|
pins_K8400.h
|
|
|
|
pins_LEAPFROG.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_MAKEBOARD_MINI.h
|
|
|
|
pins_MEGACONTROLLER.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_MEGATRONICS_2.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_MEGATRONICS_3.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_MEGATRONICS.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_MELZI_CREALITY.h
|
Better handling of DELAY_NS and DELAY_US (#10717)
|
2018-05-12 04:22:55 -05:00 |
|
pins_MELZI_MAKR3D.h
|
|
|
|
pins_MELZI_MALYAN.h
|
Better handling of DELAY_NS and DELAY_US (#10717)
|
2018-05-12 04:22:55 -05:00 |
|
pins_MELZI_TRONXY.h
|
Better handling of DELAY_NS and DELAY_US (#10717)
|
2018-05-12 04:22:55 -05:00 |
|
pins_MELZI.h
|
|
|
|
pins_MIGHTYBOARD_REVE.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_MINIRAMBO.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_MINITRONICS.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_MKS_BASE_15.h
|
Add BOARD_MKS_BASE_15 with digital micro-stepping
|
2018-04-18 22:06:25 -05:00 |
|
pins_MKS_BASE_HEROIC.h
|
Add BOARD_MKS_BASE_15 with digital micro-stepping
|
2018-04-18 22:06:25 -05:00 |
|
pins_MKS_BASE.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_MKS_GEN_13.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_MKS_GEN_L.h
|
Non-conflicting CS pins for MKS Gen L
|
2018-06-30 02:35:45 -05:00 |
|
pins_OMCA_A.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_OMCA.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_PRINTRBOARD_REVF.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_PRINTRBOARD.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_RAMBO.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_RAMPS_13.h
|
|
|
|
pins_RAMPS_ENDER_4.h
|
Add Creality Ender-4 configurations
|
2018-02-24 22:01:16 -06:00 |
|
pins_RAMPS_OLD.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_RAMPS_PLUS.h
|
|
|
|
pins_RAMPS.h
|
Fix pin assignment to KILL_PIN in MKS_MINI_12864 (#13397)
|
2019-03-15 19:15:03 -05:00 |
|
pins_RIGIDBOARD_V2.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_RIGIDBOARD.h
|
Fix RigidBoard FAN_PIN collision
|
2018-09-10 05:27:56 -05:00 |
|
pins_RUMBA.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_SAINSMART_2IN1.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_SANGUINOLOLU_11.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_SANGUINOLOLU_12.h
|
|
|
|
pins_SAV_MKI.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_SCOOVO_X9H.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_SETHI.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_SILVER_GATE.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_STB_11.h
|
|
|
|
pins_TEENSY2.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_TEENSYLU.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_TRIGORILLA_13.h
|
Update Fan 2 and E0 Auto Fan pins for Trigorilla
|
2018-05-29 12:24:37 -05:00 |
|
pins_TRIGORILLA_14.h
|
AnyCubic Trigorilla 1.4 changes
|
2018-09-15 23:17:59 -05:00 |
|
pins_ULTIMAIN_2.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_ULTIMAKER_OLD.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_ULTIMAKER.h
|
Update Ultimaker servo pin
|
2018-08-21 11:38:45 -05:00 |
|
pins_ZRIB_V20.h
|
Rename MKS_13 to MKS_GEN_13
|
2018-04-18 22:16:16 -05:00 |
|
pins.h
|
[1.1.x] Hangprinter support (#9180)
|
2018-09-08 21:17:02 -05:00 |
|
pinsDebug_list.h
|
Support more filament runout sensors in M119 (#11850)
|
2018-09-17 03:29:18 -05:00 |
|
pinsDebug_plus_70.h
|
|
|
|
pinsDebug_Teensyduino.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pinsDebug.h
|
Fix endstops.monitor_flag
|
2018-10-26 03:52:43 -05:00 |
|
planner_bezier.cpp
|
[1.1.x] Hangprinter support (#9180)
|
2018-09-08 21:17:02 -05:00 |
|
planner_bezier.h
|
|
|
|
planner.cpp
|
Fix block->mix_steps
|
2018-09-29 19:16:17 -05:00 |
|
planner.h
|
[1.1.x] Hangprinter support (#9180)
|
2018-09-08 21:17:02 -05:00 |
|
point_t.h
|
|
|
|
power_loss_recovery.cpp
|
Fix kill with MSG_POWER_LOSS_RECOVERY
|
2018-11-18 18:06:14 -06:00 |
|
power_loss_recovery.h
|
Fix and improve POWER_LOSS_RECOVERY (#11186)
|
2018-07-02 23:21:18 -05:00 |
|
power.cpp
|
Fix 5 mixing steppers, etc.
|
2018-08-29 03:21:43 -05:00 |
|
power.h
|
|
|
|
printcounter.cpp
|
Float maths updates for 2.0.x parity (#11213)
|
2018-07-06 21:44:33 -05:00 |
|
printcounter.h
|
Float maths updates for 2.0.x parity (#11213)
|
2018-07-06 21:44:33 -05:00 |
|
runout.cpp
|
Import FilamentRunoutSensor with debounce (#9947)
|
2018-03-05 01:49:19 -06:00 |
|
runout.h
|
One more IS_SD_PRINTING
|
2018-10-22 00:25:46 -05:00 |
|
SanityCheck.h
|
Don't use ENABLED with *INVERTING
|
2018-10-16 17:15:24 -05:00 |
|
Sd2Card.cpp
|
Tiny improvement to M7219
|
2018-08-02 18:43:36 -05:00 |
|
Sd2Card.h
|
|
|
|
SdBaseFile.cpp
|
Clean up and consolidate SD-related code (#10832)
|
2018-05-24 01:19:12 -05:00 |
|
SdBaseFile.h
|
Clean up and consolidate SD-related code (#10832)
|
2018-05-24 01:19:12 -05:00 |
|
SdFatConfig.h
|
Clean up and consolidate SD-related code (#10832)
|
2018-05-24 01:19:12 -05:00 |
|
SdFatStructs.h
|
|
|
|
SdFatUtil.cpp
|
|
|
|
SdFatUtil.h
|
|
|
|
SdFile.cpp
|
|
|
|
SdFile.h
|
|
|
|
SdInfo.h
|
|
|
|
SdVolume.cpp
|
Clean up and consolidate SD-related code (#10832)
|
2018-05-24 01:19:12 -05:00 |
|
SdVolume.h
|
|
|
|
serial.cpp
|
|
|
|
serial.h
|
Add USE_MARLINSERIAL conditional
|
2018-05-24 05:51:14 -05:00 |
|
servo.cpp
|
Smarter MIN, MAX, ABS macros
|
2018-05-13 04:51:33 -05:00 |
|
servo.h
|
Update servo.* for parity with 2.0.x
|
2018-03-08 19:32:32 -06:00 |
|
softspi.h
|
Overhaul of G33 Delta Calibration (#8821)
|
2018-04-11 19:12:56 -05:00 |
|
speed_lookuptable.h
|
|
|
|
status_screen_DOGM.h
|
LCD strlen functions like 2.0.x
|
2018-07-17 15:25:58 -05:00 |
|
status_screen_lite_ST7920_class.h
|
Fix include in lite status screen
|
2018-06-11 21:30:49 -05:00 |
|
status_screen_lite_ST7920_spi.h
|
Lightweight status screen for ST7920
|
2018-02-22 00:46:25 -06:00 |
|
status_screen_lite_ST7920.h
|
Add parentheses to card macros
|
2018-10-19 14:20:33 -05:00 |
|
stepper_dac.cpp
|
Float maths updates for 2.0.x parity (#11213)
|
2018-07-06 21:44:33 -05:00 |
|
stepper_dac.h
|
|
|
|
stepper_indirection.cpp
|
Set stepper directions after M501/M502
|
2018-09-15 20:25:05 -05:00 |
|
stepper_indirection.h
|
Simplify stepper driver config
|
2018-07-25 03:02:12 -05:00 |
|
stepper.cpp
|
Init Hangprinter D-axis, count D-axis advance_dividend, delta_offsets (#12181)
|
2018-10-22 18:52:39 -05:00 |
|
stepper.h
|
Set stepper directions after M501/M502
|
2018-09-15 20:25:05 -05:00 |
|
stopwatch.cpp
|
Add Stopwatch::resume method
|
2018-04-21 19:09:31 -05:00 |
|
stopwatch.h
|
Add Stopwatch::resume method
|
2018-04-21 19:09:31 -05:00 |
|
temperature.cpp
|
Remove dead code in get_pid_output, consolidate
|
2019-03-03 05:37:15 -06:00 |
|
temperature.h
|
Apply lowercase to some common methods
|
2019-02-02 16:45:07 -06:00 |
|
thermistornames.h
|
Add thermocouple with AD8495 support
|
2018-05-02 08:41:31 -05:00 |
|
thermistortable_1.h
|
|
|
|
thermistortable_2.h
|
|
|
|
thermistortable_3.h
|
|
|
|
thermistortable_4.h
|
|
|
|
thermistortable_5.h
|
|
|
|
thermistortable_6.h
|
|
|
|
thermistortable_7.h
|
|
|
|
thermistortable_8.h
|
|
|
|
thermistortable_9.h
|
|
|
|
thermistortable_10.h
|
|
|
|
thermistortable_11.h
|
|
|
|
thermistortable_12.h
|
|
|
|
thermistortable_13.h
|
|
|
|
thermistortable_15.h
|
|
|
|
thermistortable_20.h
|
Chamber temperature monitoring and auto fan control.
|
2018-04-06 23:09:44 -05:00 |
|
thermistortable_51.h
|
|
|
|
thermistortable_52.h
|
|
|
|
thermistortable_55.h
|
|
|
|
thermistortable_60.h
|
|
|
|
thermistortable_66.h
|
|
|
|
thermistortable_70.h
|
Update BQ Hephestos 2 config, NTC-70 table (#10902)
|
2018-06-07 21:23:43 -05:00 |
|
thermistortable_71.h
|
Remove oversampled data from thermistor table 71 (#11504)
|
2018-08-13 02:52:48 -05:00 |
|
thermistortable_75.h
|
|
|
|
thermistortable_110.h
|
|
|
|
thermistortable_147.h
|
|
|
|
thermistortable_501.h
|
Fix non-sensical values for Zonestar themistor table (#11816)
|
2018-09-12 15:35:43 -05:00 |
|
thermistortable_998.h
|
|
|
|
thermistortable_999.h
|
|
|
|
thermistortable_1010.h
|
|
|
|
thermistortable_1047.h
|
|
|
|
thermistortables.h
|
Loosen static assertion guarding overflow in SCAN_THERMISTOR_TABLE (#11240)
|
2018-07-11 16:42:23 -05:00 |
|
tmc_util.cpp
|
Simplify stepper driver config
|
2018-07-25 03:02:12 -05:00 |
|
tmc_util.h
|
Simplify stepper driver config
|
2018-07-25 03:02:12 -05:00 |
|
twibus.cpp
|
[1.1.x] Hangprinter support (#9180)
|
2018-09-08 21:17:02 -05:00 |
|
twibus.h
|
[1.1.x] Hangprinter support (#9180)
|
2018-09-08 21:17:02 -05:00 |
|
types.h
|
Fix types.h dependency
|
2018-02-25 22:01:01 -06:00 |
|
ubl_G29.cpp
|
Fix probe location bug....
|
2019-02-05 20:27:58 -07:00 |
|
ubl_motion.cpp
|
[1.1.x] Hangprinter support (#9180)
|
2018-09-08 21:17:02 -05:00 |
|
ubl.cpp
|
UBL G29 T current position fix (#12845)
|
2019-02-26 22:26:21 -06:00 |
|
ubl.h
|
Silentninja1 idex crash fix (#11329)
|
2018-07-24 14:44:50 -05:00 |
|
ultralcd_impl_DOGM.h
|
Clean up 12864 OLED code (#11388)
|
2018-07-30 23:02:12 -05:00 |
|
ultralcd_impl_HD44780.h
|
Add parentheses to card macros
|
2018-10-19 14:20:33 -05:00 |
|
ultralcd_st7565_u8glib_VIKI.h
|
Update DELAY_10US
|
2018-07-26 20:21:50 -05:00 |
|
ultralcd_st7920_u8glib_rrd.h
|
EINSY_RETRO uses same delays as EINSY_RAMBO
|
2018-10-08 22:29:48 -05:00 |
|
ultralcd.cpp
|
[1.1.x] BLTOUCH_V3 parity with 2.0.x (#13682)
|
2019-04-15 16:33:11 -05:00 |
|
ultralcd.h
|
Add M524 to abort SD printing (#11386)
|
2018-10-19 14:23:46 -05:00 |
|
utf_mapper.h
|
[1.1.x] Buffer overflow and scroll fix, UTF8 cleanup (#10851)
|
2018-05-25 23:31:19 -05:00 |
|
utility.cpp
|
Rename float32 => float52, etc.
|
2018-05-01 04:41:56 -05:00 |
|
utility.h
|
Float maths updates for 2.0.x parity (#11213)
|
2018-07-06 21:44:33 -05:00 |
|
vector_3.cpp
|
Float maths updates for 2.0.x parity (#11213)
|
2018-07-06 21:44:33 -05:00 |
|
vector_3.h
|
|
|
|
Version.h
|
Restore bugfix README, etc.
|
2018-08-07 13:45:03 -05:00 |
|
watchdog.cpp
|
|
|
|
watchdog.h
|
|
|
