3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
2a7f75c2c3
Prusa-Firmware/lang/po/Firmware_it.po

2111 lines
63 KiB
Plaintext
Raw Normal View History

MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
# Translation of Prusa-Firmware into Italian.
#
msgid ""
msgstr ""
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
"Project-Id-Version: Prusa-Firmware\n"
"POT-Creation-Date: Wed 16 Mar 2022 09:24:52 AM CET\n"
"PO-Revision-Date: 2022-05-23 13:09+0200\n"
"Last-Translator: \n"
"Language-Team: \n"
"Language: it\n"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: Poedit 2.0.7\n"
"X-Poedit-SourceCharset: UTF-8\n"
"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_IR_03_OR_OLDER c=18
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/fsensor.cpp:178 ../../Firmware/messages.cpp:161
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid " 0.3 or older"
msgstr " 0.3 o inferiore"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_IR_04_OR_NEWER c=18
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/fsensor.cpp:180 ../../Firmware/messages.cpp:160
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid " 0.4 or newer"
msgstr " 0.4 o superiore"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SELFTEST_FS_LEVEL c=20
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:7066
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "%s level expected"
msgstr "atteso livello %s"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
Update pot and po files
2022-09-14 07:16:16 +00:00
#. MSG_CANCEL c=10
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1987
#: ../../Firmware/ultralcd.cpp:3854
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ">Cancel"
msgstr ">Annulla"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_BABYSTEPPING_Z c=15
#. Beware: must include the ':' as its last character
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:2689
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Adjusting Z:"
msgstr "Compensaz. Z:"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SELFTEST_CHECK_ALLCORRECT c=20
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:7343
Update all po files
2021-04-29 13:41:47 +00:00
msgid "All correct"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgstr "Nessun errore"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_WIZARD_DONE c=20 r=3
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:4190
#: ../../Firmware/ultralcd.cpp:4199
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "All is done. Happy printing!"
msgstr "Tutto fatto. Buona stampa!"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SORT_ALPHA c=8
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4423
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Alphabet"
msgstr "Alfabeti"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#. MSG_ALWAYS c=6
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4327
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Always"
Update trasnlations for MK3_3.12 branch
2022-10-28 06:41:55 +00:00
msgstr "Sempre"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_AMBIENT c=14
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:1424
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Ambient"
msgstr "Ambiente"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:3002
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Are left and right Z~carriages all up?"
msgstr "I carrelli Z sin/des sono altezza max?"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SOUND_BLIND c=7
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4478
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Assist"
msgstr "Assist."
#. MSG_AUTO c=6
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5886
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Auto"
msgstr "Auto"
#. MSG_AUTO_HOME c=18
Update Firmware.pot and Firmware_xx.po files
2022-09-29 15:52:23 +00:00
#: ../../Firmware/Marlin_main.cpp:3271 ../../Firmware/messages.cpp:9
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:4919
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Auto home"
msgstr "Trova origine"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_AUTO_POWER c=10
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:4383
#: ../../Firmware/ultralcd.cpp:5801
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Auto power"
msgstr "Automatico"
#. MSG_AUTOLOAD_FILAMENT c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:5594
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "AutoLoad filament"
msgstr "Autocaric. filam."
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_AUTOLOADING_ONLY_IF_FSENS_ON c=20 r=4
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:3568
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"Autoloading filament available only when filament sensor is turned on..."
msgstr ""
"Caricamento automatico filamento disponibile solo con il sensore attivo..."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_AUTOLOADING_ENABLED c=20 r=4
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:2320
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"Autoloading filament is active, just press the knob and insert filament..."
Update all po files
2021-04-29 13:41:47 +00:00
msgstr "Caricamento automatico attivo, premi la manopola e inserisci il filam."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SELFTEST_AXIS c=16
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:7045
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Axis"
msgstr "Assi"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SELFTEST_AXIS_LENGTH c=20
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:7044
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Axis length"
msgstr "Lunghezza dell'asse"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_BACK c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:59 ../../Firmware/ultralcd.cpp:2770
#: ../../Firmware/ultralcd.cpp:5883 ../../Firmware/ultralcd.cpp:7878
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Back"
msgstr "Indietro"
#. MSG_BED c=13
Update Firmware.pot and Firmware_xx.po files
2022-09-29 15:52:23 +00:00
#: ../../Firmware/Marlin_main.cpp:2051 ../../Firmware/Marlin_main.cpp:4767
#: ../../Firmware/Marlin_main.cpp:4819 ../../Firmware/messages.cpp:12
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:1422 ../../Firmware/ultralcd.cpp:5743
#: ../../Firmware/ultralcd.cpp:5913
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Bed"
msgstr "Piano"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_BED_HEATING c=20
Update Firmware.pot and Firmware_xx.po files
2022-09-29 15:52:23 +00:00
#: ../../Firmware/Marlin_main.cpp:6260 ../../Firmware/messages.cpp:14
#: ../../Firmware/ultralcd.cpp:575
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Bed Heating"
msgstr "Riscald. piano"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_BED_DONE c=20
Update Firmware.pot and Firmware_xx.po files
2022-09-29 15:52:23 +00:00
#: ../../Firmware/Marlin_main.cpp:6298 ../../Firmware/messages.cpp:13
#: ../../Firmware/ultralcd.cpp:578
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Bed done"
msgstr "Piano fatto."
#. MSG_BED_CORRECTION_MENU c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:4931
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Bed level correct"
msgstr "Correz. liv.piano"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_BED_LEVELING_FAILED_POINT_LOW c=20 r=6
Update Firmware.pot and Firmware_xx.po files
2022-09-29 15:52:23 +00:00
#: ../../Firmware/Marlin_main.cpp:2214 ../../Firmware/Marlin_main.cpp:2993
#: ../../Firmware/Marlin_main.cpp:3003
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#: ../../Firmware/mesh_bed_calibration.cpp:2862
#: ../../Firmware/mesh_bed_calibration.cpp:2870
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/mesh_bed_calibration.cpp:2896 ../../Firmware/messages.cpp:15
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"Bed leveling failed. Sensor didn't trigger. Debris on nozzle? Waiting for "
"reset."
msgstr ""
"Livellamento piano fallito. Sensore KO? Residui su ugello? In attesa di "
"reset."
#. MSG_SELFTEST_BEDHEATER c=20
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:7002
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Bed/Heater"
msgstr "Piano/Riscald."
#. MSG_BELT_STATUS c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1477
#: ../../Firmware/ultralcd.cpp:1745
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Belt status"
msgstr "Stato cinghie"
#. MSG_BELTTEST c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:4921
Update all po files
2021-04-29 13:41:47 +00:00
msgid "Belt test"
msgstr "Test cinghie"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_RECOVER_PRINT c=20 r=2
Update Firmware.pot and Firmware_xx.po files
2022-09-29 15:52:23 +00:00
#: ../../Firmware/Marlin_main.cpp:1607 ../../Firmware/Marlin_main.cpp:1629
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:77
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Blackout occurred. Recover print?"
msgstr "Blackout rilevato. Recuperare stampa?"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_BRIGHT c=6
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:5886
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Bright"
msgstr "Chiaro"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_BRIGHTNESS c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:4869
#: ../../Firmware/ultralcd.cpp:5811
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Brightness"
msgstr "Luminosita'"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_CALIBRATE_BED c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:4925
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Calibrate XYZ"
msgstr "Calibra XYZ"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_HOMEYZ c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:48 ../../Firmware/ultralcd.cpp:4927
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Calibrate Z"
msgstr "Calibra Z"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_MOVE_CARRIAGE_TO_THE_TOP c=20 r=8
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:2965
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"Calibrating XYZ. Rotate the knob to move the Z carriage up to the end "
"stoppers. Click when done."
msgstr ""
"Calibrazione XYZ. Ruotare la manopola per alzare il carrello Z fino "
"all'altezza massima. Click per terminare."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_CALIBRATE_Z_AUTO c=20 r=2
Update Firmware.pot and Firmware_xx.po files
2022-09-29 15:52:23 +00:00
#: ../../Firmware/Marlin_main.cpp:2170 ../../Firmware/messages.cpp:19
#: ../../Firmware/ultralcd.cpp:623
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Calibrating Z"
msgstr "Calibrando Z"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_MOVE_CARRIAGE_TO_THE_TOP_Z c=20 r=8
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:2964
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"Calibrating Z. Rotate the knob to move the Z carriage up to the end "
"stoppers. Click when done."
msgstr ""
"Calibrazione Z. Ruotare la manopola per alzare il carrello Z fino "
"all'altezza massima. Click per terminare."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_CALIBRATING_HOME c=20
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:7345
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Calibrating home"
msgstr "Calibrazione Home"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_CALIBRATION c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:5603
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Calibration"
msgstr "Calibrazione"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_HOMEYZ_DONE c=20
Update Firmware.pot and Firmware_xx.po files
2022-09-29 15:52:23 +00:00
#: ../../Firmware/ultralcd.cpp:635
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Calibration done"
msgstr "Calibr. completa"
#. MSG_SD_REMOVED c=20
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:7752
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Card removed"
msgstr "SD rimossa"
Upadte pot and po again
2022-09-14 08:47:56 +00:00
#. MSG_CNG_SDCARD c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:5560
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Change SD card"
Update trasnlations for MK3_3.12 branch
2022-10-28 06:41:55 +00:00
msgstr "Cambia scheda SD"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_FILAMENTCHANGE c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5519
#: ../../Firmware/ultralcd.cpp:5752
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Change filament"
msgstr "Cambia filamento"
#. MSG_CHANGE_SUCCESS c=20
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:2182
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Change success!"
msgstr "Cambio riuscito!"
#. MSG_CORRECTLY c=20
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:2234
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Changed correctly?"
msgstr "Cambio corretto?"
#. MSG_CHECKING_X c=20
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6208
#: ../../Firmware/ultralcd.cpp:7335
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Checking X axis"
msgstr "Verifica asse X"
#. MSG_CHECKING_Y c=20
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6217
#: ../../Firmware/ultralcd.cpp:7336
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Checking Y axis"
msgstr "Verifica asse Y"
#. MSG_SELFTEST_CHECK_Z c=20
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:7337
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Checking Z axis"
msgstr "Verifica asse Z"
#. MSG_SELFTEST_CHECK_BED c=20
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:7338
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Checking bed"
msgstr "Verifica piano"
#. MSG_SELFTEST_CHECK_ENDSTOPS c=20
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:7334
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Checking endstops"
msgstr "Verifica finecorsa"
#. MSG_CHECKING_FILE c=17
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:7433
Update po files
2021-03-01 07:46:16 +00:00
msgid "Checking file"
Update all po files
2021-04-29 13:41:47 +00:00
msgstr "Verifica file"
Update po files
2021-03-01 07:46:16 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SELFTEST_CHECK_HOTEND c=20
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:7340
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Checking hotend"
msgstr "Verifica ugello"
#. MSG_SELFTEST_CHECK_FSENSOR c=20
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7341
#: ../../Firmware/ultralcd.cpp:7342
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Checking sensors"
msgstr "Controllo sensori"
#. MSG_CHECKS c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:4784
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Checks"
msgstr "Controlli"
#. MSG_NOT_COLOR c=19
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:2237
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Color not correct"
msgstr "Colore non puro"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_COMMUNITY_MADE c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3744
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Community made"
msgstr "Contribuiti"
#. MSG_CONTINUE_SHORT c=5
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4723
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Cont."
msgstr "Cont."
#. MSG_COOLDOWN c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2144
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Cooldown"
msgstr "Raffredda"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_COPY_SEL_LANG c=20 r=3
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:3682
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Copy selected language?"
msgstr "Copiare la lingua selezionata?"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_CRASH c=7
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1240
#: ../../Firmware/ultralcd.cpp:1281 ../../Firmware/ultralcd.cpp:1291
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Crash"
msgstr "Impatto"
#. MSG_CRASHDETECT c=13
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4360
#: ../../Firmware/ultralcd.cpp:4361 ../../Firmware/ultralcd.cpp:4363
#: ../../Firmware/ultralcd.cpp:5787 ../../Firmware/ultralcd.cpp:5789
#: ../../Firmware/ultralcd.cpp:5793
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Crash det."
msgstr "Rileva.crash"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_CRASH_DETECTED c=20
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/Marlin_main.cpp:597 ../../Firmware/messages.cpp:27
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Crash detected."
msgstr "Rilevato impatto."
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_CRASH_DET_ONLY_IN_NORMAL c=20 r=4
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:3540
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"Crash detection can\n"
"be turned on only in\n"
"Normal mode"
msgstr ""
"Rilev. impatto\n"
"attivabile solo\n"
"in Modalita normale"
#. MSG_CUT_FILAMENT c=17
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5197
#: ../../Firmware/ultralcd.cpp:5589
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Cut filament"
msgstr "Taglia filamento"
#. MSG_CUTTER c=9
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4322
#: ../../Firmware/ultralcd.cpp:4327 ../../Firmware/ultralcd.cpp:4332
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Cutter"
msgstr "Tagliatr."
#. MSG_MMU_CUTTING_FIL c=18
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/mmu.cpp:1048
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Cutting filament"
msgstr "Tagliando filam."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_DATE c=17
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:1687
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Date:"
msgstr "Data:"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_DIM c=6
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5886
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Dim"
msgstr "Scuro"
Update po files
2021-03-01 07:46:16 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_DISABLE_STEPPERS c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:4821
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Disable steppers"
Update trasnlations for MK3_3.12 branch
2022-10-28 06:41:55 +00:00
msgstr "Disattiva motori"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_BABYSTEP_Z_NOT_SET c=20 r=12
Update Firmware.pot and Firmware_xx.po files
2022-09-29 15:52:23 +00:00
#: ../../Firmware/Marlin_main.cpp:1552 ../../Firmware/Marlin_main.cpp:3411
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:11
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"Distance between tip of the nozzle and the bed surface has not been set yet. "
"Please follow the manual, chapter First steps, section First layer "
"calibration."
msgstr ""
"Distanza tra la punta dell'ugello e la superficie del piano non ancora "
"impostata. Si prega di seguire il manuale, capitolo Primi Passi, sezione "
"Calibrazione primo strato."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_WIZARD_REPEAT_V2_CAL c=20 r=7
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:4164
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"Do you want to repeat last step to readjust distance between nozzle and "
"heatbed?"
msgstr ""
"Desideri ripetere l'ultimo passaggio per migliorare la distanza fra ugello e "
"piatto?"
#. MSG_EXTRUDER_CORRECTION c=13
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:4233
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "E-correct:"
msgstr "Correzione-E:"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_ERROR c=10
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2298
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "ERROR:"
msgstr "ERRORE:"
#. MSG_FSENS_NOT_RESPONDING c=20 r=4
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:3581
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "ERROR: Filament sensor is not responding, please check connection."
msgstr "ERRORE: il sensore filam. non risponde,Controllare conness."
#. MSG_EJECT_FILAMENT c=17
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5178
#: ../../Firmware/ultralcd.cpp:5587
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Eject filament"
Update po files after all these changes
2021-01-26 10:08:57 +00:00
msgstr "Espelli fil."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_EJECTING_FILAMENT c=20
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/mmu.cpp:1076
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Ejecting filament"
msgstr "Espellendo filamento"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SELFTEST_ENDSTOP c=16
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:7015
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Endstop"
msgstr "Finecorsa"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SELFTEST_ENDSTOP_NOTHIT c=20
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:7020
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Endstop not hit"
msgstr "Finec. fuori portata"
#. MSG_SELFTEST_ENDSTOPS c=20
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:7006
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Endstops"
msgstr "Finecorsa"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_EXTRUDER c=17
Update Firmware.pot and Firmware_xx.po files
2022-09-29 15:52:23 +00:00
#: ../../Firmware/Marlin_main.cpp:8608 ../../Firmware/messages.cpp:30
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:3514
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Extruder"
msgstr "Estrusore"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_INFO_EXTRUDER c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:1741
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Extruder info"
msgstr "Info estrusore"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_FSENSOR_AUTOLOAD c=13
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4248
#: ../../Firmware/ultralcd.cpp:4256 ../../Firmware/ultralcd.cpp:4267
#: ../../Firmware/ultralcd.cpp:4269
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "F. autoload"
msgstr "Autocar.fil."
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_FS_ACTION c=10
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:4723
#: ../../Firmware/ultralcd.cpp:4726
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "FS Action"
msgstr "Azione FS"
#. MSG_FS_V_03_OR_OLDER c=18
Update Firmware.pot and Firmware_xx.po files
2022-09-29 15:52:23 +00:00
#: ../../Firmware/Marlin_main.cpp:9485
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "FS v0.3 or older"
msgstr "FS 0.3 o inferiore"
#. MSG_FS_V_04_OR_NEWER c=18
Update Firmware.pot and Firmware_xx.po files
2022-09-29 15:52:23 +00:00
#: ../../Firmware/Marlin_main.cpp:9477
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "FS v0.4 or newer"
msgstr "FS 0.4 o superiore"
#. MSG_FAIL_STATS c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:5611
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Fail stats"
msgstr "Stat. fallimenti"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_MMU_FAIL_STATS c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:5614
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Fail stats MMU"
msgstr "Stat.fall. MMU"
#. MSG_FALSE_TRIGGERING c=20
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:7061
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "False triggering"
msgstr "Falso innesco"
#. MSG_FAN_SPEED c=14
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5745
#: ../../Firmware/ultralcd.cpp:5915
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Fan speed"
msgstr "Velocita vent."
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SELFTEST_FAN c=20
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:7173
#: ../../Firmware/ultralcd.cpp:7331 ../../Firmware/ultralcd.cpp:7332
#: ../../Firmware/ultralcd.cpp:7333
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Fan test"
msgstr "Test ventola"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_FANS_CHECK c=13
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4830
#: ../../Firmware/ultralcd.cpp:5778
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Fans check"
msgstr "Control.vent"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_FIL_RUNOUTS c=15
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1239
#: ../../Firmware/ultralcd.cpp:1280 ../../Firmware/ultralcd.cpp:1346
#: ../../Firmware/ultralcd.cpp:1348
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Fil. runouts"
msgstr "Fil. esauriti"
#. MSG_FSENSOR c=12
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:3470
#: ../../Firmware/ultralcd.cpp:4247 ../../Firmware/ultralcd.cpp:4253
#: ../../Firmware/ultralcd.cpp:4263 ../../Firmware/ultralcd.cpp:5759
#: ../../Firmware/ultralcd.cpp:5763 ../../Firmware/ultralcd.cpp:5767
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Fil. sensor"
msgstr "Sensore fil."
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_FILAMENT c=17
Update Firmware.pot and Firmware_xx.po files
2022-09-29 15:52:23 +00:00
#: ../../Firmware/Marlin_main.cpp:8577 ../../Firmware/Marlin_main.cpp:8604
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:33 ../../Firmware/ultralcd.cpp:3854
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Filament"
msgstr "Filamento"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_FILAMENT_CLEAN c=20 r=2
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2306
#: ../../Firmware/ultralcd.cpp:2312
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Filament extruding & with correct color?"
msgstr "Filamento estruso e con colore corretto?"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_NOT_LOADED c=19
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:2236
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Filament not loaded"
msgstr "Fil. non caricato"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SELFTEST_FILAMENT_SENSOR c=17
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7056
#: ../../Firmware/ultralcd.cpp:7060 ../../Firmware/ultralcd.cpp:7064
#: ../../Firmware/ultralcd.cpp:7360
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Filament sensor"
msgstr "Sensore filam."
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_FILAMENT_USED c=19
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:2384
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Filament used"
msgstr "Fil. utilizzato"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_FILE_INCOMPLETE c=20 r=3
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:7491
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "File incomplete. Continue anyway?"
msgstr "File incompleto. Continuare comunque?"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_FINISHING_MOVEMENTS c=20
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:41 ../../Firmware/ultralcd.cpp:5336
#: ../../Firmware/ultralcd.cpp:5652
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Finishing movements"
msgstr "Finaliz. spostamenti"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_V2_CALIBRATION c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4917
#: ../../Firmware/ultralcd.cpp:5446
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "First layer cal."
msgstr "Cal. primo strato"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_WIZARD_SELFTEST c=20 r=8
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:4085
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "First, I will run the selftest to check most common assembly problems."
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgstr ""
"Per primo avviero l'autotest per controllare gli errori di assemblaggio piu "
"comuni."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_MMU_FIX_ISSUE c=20 r=4
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/mmu.cpp:728
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Fix the issue and then press button on MMU unit."
Update all po files
2021-04-29 13:41:47 +00:00
msgstr "Risolvere il problema e premere il bottone sull'unita MMU."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_FLOW c=15
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:5746
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Flow"
msgstr "Flusso"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SELFTEST_PART_FAN c=20
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:83 ../../Firmware/ultralcd.cpp:7026
#: ../../Firmware/ultralcd.cpp:7179 ../../Firmware/ultralcd.cpp:7184
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Front print fan?"
msgstr "Ventola frontale?"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_BED_CORRECTION_FRONT c=14
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:2773
Update all po files
2022-02-08 13:48:16 +00:00
msgid "Front side[μm]"
msgstr "Fronte [μm]"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SELFTEST_FANS c=20
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:7050
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Front/left fans"
Update all po files
2021-04-29 13:41:47 +00:00
msgstr "Ventola frontale/sin"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_GCODE_DIFF_CONTINUE c=20 r=4
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/util.cpp:418
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "G-code sliced for a different level. Continue?"
msgstr "G-code processato per un livello diverso. Continuare?"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_GCODE_DIFF_CANCELLED c=20 r=7
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/util.cpp:424
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"G-code sliced for a different level. Please re-slice the model again. Print "
"cancelled."
msgstr ""
"G-code processato per un livello diverso. Per favore esegui nuovamente lo "
"slice del modello. Stampa annullata."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_GCODE_DIFF_PRINTER_CONTINUE c=20 r=5
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:131 ../../Firmware/util.cpp:335
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/util.cpp:471
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "G-code sliced for a different printer type. Continue?"
msgstr "G-code processato per una stampante diversa. Continuare?"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_GCODE_DIFF_PRINTER_CANCELLED c=20 r=8
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:132 ../../Firmware/util.cpp:341
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/util.cpp:477
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"G-code sliced for a different printer type. Please re-slice the model again. "
"Print cancelled."
msgstr ""
"G-code processato per una stampante diversa. Per favore esegui nuovamente lo "
"slice del modello. Stampa annullata."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_GCODE_NEWER_FIRMWARE_CONTINUE c=20 r=5
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/util.cpp:385
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "G-code sliced for a newer firmware. Continue?"
msgstr "G-code processato per un firmware piu recente. Continuare?"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_GCODE_NEWER_FIRMWARE_CANCELLED c=20 r=8
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/util.cpp:391
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"G-code sliced for a newer firmware. Please update the firmware. Print "
"cancelled."
msgstr ""
"G-code processato per un firmware piu recente. Per favore aggiorna il "
"firmware. Stampa annullata."
#. MSG_GCODE c=8
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4674
#: ../../Firmware/ultralcd.cpp:4677 ../../Firmware/ultralcd.cpp:4680
#: ../../Firmware/ultralcd.cpp:4683
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Gcode"
Update trasnlations for MK3_3.12 branch
2022-10-28 06:41:55 +00:00
msgstr "Gcode"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_HW_SETUP c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:4691
#: ../../Firmware/ultralcd.cpp:4745 ../../Firmware/ultralcd.cpp:4837
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "HW Setup"
msgstr "Impostazioni HW"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SELFTEST_HEATERTHERMISTOR c=20
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:6998
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Heater/Thermistor"
msgstr "Riscald./Termist."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_HEATING c=20
Update Firmware.pot and Firmware_xx.po files
2022-09-29 15:52:23 +00:00
#: ../../Firmware/Marlin_main.cpp:6203 ../../Firmware/messages.cpp:46
#: ../../Firmware/ultralcd.cpp:567
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Heating"
msgstr "Riscaldamento..."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_BED_HEATING_SAFETY_DISABLED c=20 r=4
Update Firmware.pot and Firmware_xx.po files
2022-09-29 15:52:23 +00:00
#: ../../Firmware/Marlin_main.cpp:9398
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Heating disabled by safety timer."
msgstr "Riscaldamento fermato dal timer di sicurezza."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_HEATING_COMPLETE c=20
Update Firmware.pot and Firmware_xx.po files
2022-09-29 15:52:23 +00:00
#: ../../Firmware/Marlin_main.cpp:6234 ../../Firmware/messages.cpp:47
#: ../../Firmware/ultralcd.cpp:570
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Heating done."
msgstr "Riscald. completo"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_WIZARD_WELCOME_SHIPPING c=20 r=16
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4061
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"Hi, I am your Original Prusa i3 printer. I will guide you through a short "
"setup process, in which the Z-axis will be calibrated. Then, you will be "
"ready to print."
msgstr ""
"Ciao, sono la tua stampante Original Prusa i3. Ti guidero attraverso un "
"rapido processo in cui verra calibrato l'asse Z. Poi, sarai pronto a "
"stampare."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_WIZARD_WELCOME c=20 r=7
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4064
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"Hi, I am your Original Prusa i3 printer. Would you like me to guide you "
"through the setup process?"
msgstr ""
"Ciao, sono la tua stampante Original Prusa i3. Gradiresti un aiuto nel "
"processo di configurazione?"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_HIGH_POWER c=10
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:4377
#: ../../Firmware/ultralcd.cpp:4386 ../../Firmware/ultralcd.cpp:5799
#: ../../Firmware/ultralcd.cpp:5802
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "High power"
msgstr "Forte"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#. MSG_HOTEND_FAN_SPEED c=15
#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1145
#: ../../Firmware/ultralcd.cpp:7351
msgid "Hotend fan:"
msgstr "Ventola hotend:"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_WIZARD_XYZ_CAL c=20 r=8
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:4094
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "I will run xyz calibration now. It will take approx. 12 mins."
msgstr "Adesso avviero una Calibrazione XYZ. Puo durare circa 12 min."
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_WIZARD_Z_CAL c=20 r=8
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:4102
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "I will run z calibration now."
msgstr "Adesso avviero la Calibrazione Z."
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_ADDITIONAL_SHEETS c=20 r=9
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:4172
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"If you have additional steel sheets, calibrate their presets in Settings - "
"HW Setup - Steel sheets."
msgstr ""
"Se hai piastre d'acciaio aggiuntive, calibra i preset in Impostazioni - "
"Setup HW - Piastre in Acciaio."
Update pot and po files
2022-09-14 07:16:16 +00:00
#. MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1 c=20 r=4
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#: ../../Firmware/mesh_bed_calibration.cpp:2531
msgid "Improving bed calibration point"
Update trasnlations for MK3_3.12 branch
2022-10-28 06:41:55 +00:00
msgstr "Miglioramento punto di calibrazione del piatto"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_INFO_SCREEN c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:5500
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Info screen"
msgstr "Schermata info"
Update pot and po files
2022-09-14 07:16:16 +00:00
#. MSG_INIT_SDCARD c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:5567
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Init. SD card"
Update trasnlations for MK3_3.12 branch
2022-10-28 06:41:55 +00:00
msgstr "Inizial. scheda SD"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_INSERT_FILAMENT c=20
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:2171
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Insert filament"
msgstr "Inserire filamento"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_INSERT_FIL c=20 r=6
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:6253
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"Insert the filament (do not load it) into the extruder and then press the "
"knob."
msgstr ""
"Inserire filamento (senza caricarlo) nell'estrusore e premere la manopola."
#. MSG_FILAMENT_LOADED c=20 r=2
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3874
#: ../../Firmware/ultralcd.cpp:4127 ../../Firmware/ultralcd.cpp:4130
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Is filament loaded?"
msgstr "Il filamento e' stato caricato?"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_STEEL_SHEET_CHECK c=20 r=2
Update Firmware.pot and Firmware_xx.po files
2022-09-29 15:52:23 +00:00
#: ../../Firmware/Marlin_main.cpp:3312 ../../Firmware/Marlin_main.cpp:4886
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4103
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Is steel sheet on heatbed?"
msgstr "Piastra d'acciaio su piano riscaldato?"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_ITERATION c=12
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/mesh_bed_calibration.cpp:2253 ../../Firmware/messages.cpp:49
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Iteration"
msgstr "Iterazione"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_LAST_PRINT c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:52 ../../Firmware/ultralcd.cpp:1167
#: ../../Firmware/ultralcd.cpp:1315
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Last print"
msgstr "Ultima stampa"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_LAST_PRINT_FAILURES c=20
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:53 ../../Firmware/ultralcd.cpp:1188
#: ../../Firmware/ultralcd.cpp:1278 ../../Firmware/ultralcd.cpp:1288
#: ../../Firmware/ultralcd.cpp:1345
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Last print failures"
msgstr "Errori ultima stampa"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_LEFT c=10
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:2515
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Left"
msgstr "Sinistra"
rename `Extruder fan` to `Hotend fan` Fix cherry-pick issues
2022-10-17 11:49:18 +00:00
#. MSG_SELFTEST_HOTEND_FAN c=20
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:7032
#: ../../Firmware/ultralcd.cpp:7179 ../../Firmware/ultralcd.cpp:7184
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Left hotend fan?"
msgstr "Vent SX hotend?"
#. MSG_BED_CORRECTION_LEFT c=14
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:2771
Update all po files
2022-02-08 13:48:16 +00:00
msgid "Left side [μm]"
msgstr "Sinistra [μm]"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_BL_HIGH c=12
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:5884
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Level Bright"
msgstr "Liv. Chiaro"
#. MSG_BL_LOW c=12
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:5885
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Level Dimmed"
msgstr "Liv. Scuro"
#. MSG_LIN_CORRECTION c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:4845
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Lin. correction"
msgstr "Correzione lineare"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_BABYSTEP_Z c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4857
#: ../../Firmware/ultralcd.cpp:5515
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Live adjust Z"
msgstr "Compensazione Z"
Update pot and po files
2022-09-14 07:16:16 +00:00
#. MSG_LOAD_ALL c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:5142
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Load all"
Update trasnlations for MK3_3.12 branch
2022-10-28 06:41:55 +00:00
msgstr "Carica tutti"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_LOAD_FILAMENT c=17
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:5144
#: ../../Firmware/ultralcd.cpp:5155 ../../Firmware/ultralcd.cpp:5584
#: ../../Firmware/ultralcd.cpp:5598
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Load filament"
msgstr "Carica filamento"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_LOAD_TO_NOZZLE c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:5585
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Load to nozzle"
msgstr "Carica ugello"
#. MSG_LOADING_COLOR c=20
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:2204
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Loading color"
msgstr "Caricando colore"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_LOADING_FILAMENT c=20
Update Firmware.pot and Firmware_xx.po files
2022-09-29 15:52:23 +00:00
#: ../../Firmware/Marlin_main.cpp:3641 ../../Firmware/messages.cpp:55
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/mmu.cpp:872 ../../Firmware/mmu.cpp:906
#: ../../Firmware/mmu.cpp:1014 ../../Firmware/mmu.cpp:1026
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:2215 ../../Firmware/ultralcd.cpp:3968
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Loading filament"
msgstr "Caricando filamento"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_LOOSE_PULLEY c=20
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:7038
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Loose pulley"
msgstr "Puleggia lenta"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SOUND_LOUD c=7
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4469
#: ../../Firmware/ultralcd.cpp:4481
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Loud"
msgstr "Forte"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_MK3_FIRMWARE_ON_MK3S c=20 r=4
Update Firmware.pot and Firmware_xx.po files
2022-09-29 15:52:23 +00:00
#: ../../Firmware/Marlin_main.cpp:881
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "MK3 firmware detected on MK3S printer"
msgstr "Firmware MK3 rilevato su stampante MK3S"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_MK3S_FIRMWARE_ON_MK3 c=20 r=4
Update Firmware.pot and Firmware_xx.po files
2022-09-29 15:52:23 +00:00
#: ../../Firmware/Marlin_main.cpp:874
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "MK3S firmware detected on MK3 printer"
msgstr "Firmware MK3S rilevato su stampante MK3"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_MMU_MODE c=8
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4400
#: ../../Firmware/ultralcd.cpp:4401
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "MMU Mode"
msgstr "Mod. MMU"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_MMU_OK_RESUMING_POSITION c=20 r=4
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/mmu.cpp:763
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "MMU OK. Resuming position..."
Update all po files
2021-04-29 13:41:47 +00:00
msgstr "MMU OK. riprendendo la posizione..."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_MMU_OK_RESUMING_TEMPERATURE c=20 r=4
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/mmu.cpp:756
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "MMU OK. Resuming temperature..."
Update all po files
2021-04-29 13:41:47 +00:00
msgstr "MMU OK. Ripristino temperatura..."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_MMU_OK_RESUMING c=20 r=4
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/mmu.cpp:774
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "MMU OK. Resuming..."
msgstr "MMU OK. Riprendendo..."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_MMU_FAILS c=15
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:64 ../../Firmware/ultralcd.cpp:1189
#: ../../Firmware/ultralcd.cpp:1212
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "MMU fails"
msgstr "Fallimenti MMU"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_MMU_LOAD_FAILED c=20
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/mmu.cpp:1248
Update all po files
2021-04-29 13:41:47 +00:00
msgid "MMU load failed"
msgstr "Caricam. MMU fallito"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_MMU_LOAD_FAILS c=15
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:1190
#: ../../Firmware/ultralcd.cpp:1213
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "MMU load fails"
Update all po files
2021-04-29 13:41:47 +00:00
msgstr "Car MMU falliti"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_MMU_USER_ATTENTION c=20 r=3
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/mmu.cpp:723
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "MMU needs user attention."
msgstr "Il MMU richiede attenzione dall'utente."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_MMU_POWER_FAILS c=15
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:1214
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "MMU power fails"
msgstr "Manc. corr. MMU"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_MMU_CONNECTED c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:1699
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "MMU2 connected"
msgstr "MMU2 connessa"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_MAGNETS_COMP c=13
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:5858
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Magnets comp."
msgstr "Comp. Magneti"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_MAIN c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:58 ../../Firmware/ultralcd.cpp:1166
#: ../../Firmware/ultralcd.cpp:1314 ../../Firmware/ultralcd.cpp:1357
#: ../../Firmware/ultralcd.cpp:1664 ../../Firmware/ultralcd.cpp:4814
#: ../../Firmware/ultralcd.cpp:4911 ../../Firmware/ultralcd.cpp:5141
#: ../../Firmware/ultralcd.cpp:5153 ../../Firmware/ultralcd.cpp:5176
#: ../../Firmware/ultralcd.cpp:5195 ../../Firmware/ultralcd.cpp:5739
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Main"
msgstr "Menu principale"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_MEASURED_SKEW c=14
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:2556
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Measured skew"
msgstr "Dev. misurata"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=20 r=3
Update Firmware.pot and Firmware_xx.po files
2022-09-29 15:52:23 +00:00
#: ../../Firmware/Marlin_main.cpp:3293
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/mesh_bed_calibration.cpp:2840 ../../Firmware/messages.cpp:62
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Measuring reference height of calibration point"
msgstr "Misura altezza di rif. del punto di calib."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_MESH c=12
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:5854
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Mesh"
msgstr "Griglia"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_MESH_BED_LEVELING c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4842
#: ../../Firmware/ultralcd.cpp:4929
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Mesh Bed Leveling"
msgstr "Liv. griglia piano"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_MODE c=6
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:100 ../../Firmware/ultralcd.cpp:4355
#: ../../Firmware/ultralcd.cpp:4357 ../../Firmware/ultralcd.cpp:4377
#: ../../Firmware/ultralcd.cpp:4380 ../../Firmware/ultralcd.cpp:4383
#: ../../Firmware/ultralcd.cpp:4386 ../../Firmware/ultralcd.cpp:5785
#: ../../Firmware/ultralcd.cpp:5792 ../../Firmware/ultralcd.cpp:5799
#: ../../Firmware/ultralcd.cpp:5800 ../../Firmware/ultralcd.cpp:5801
#: ../../Firmware/ultralcd.cpp:5802 ../../Firmware/ultralcd.cpp:5886
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Mode"
msgstr "Mod."
#. MSG_MODE_CHANGE_IN_PROGRESS c=20 r=3
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:3617
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Mode change in progress..."
msgstr "Cambio modalita in corso..."
#. MSG_MODEL c=8
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4594
#: ../../Firmware/ultralcd.cpp:4597 ../../Firmware/ultralcd.cpp:4600
#: ../../Firmware/ultralcd.cpp:4603
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Model"
msgstr "Modello"
#. MSG_SELFTEST_MOTOR c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7012
#: ../../Firmware/ultralcd.cpp:7021 ../../Firmware/ultralcd.cpp:7039
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Motor"
msgstr "Motore"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_MOVE_X c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:3511
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Move X"
msgstr "Sposta X"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_MOVE_Y c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:3512
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Move Y"
msgstr "Sposta Y"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_MOVE_Z c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:3513
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Move Z"
msgstr "Sposta Z"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_MOVE_AXIS c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:4820
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Move axis"
msgstr "Muovi asse"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_NA c=3
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:124
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:2521 ../../Firmware/ultralcd.cpp:2566
#: ../../Firmware/ultralcd.cpp:3430 ../../Firmware/ultralcd.cpp:4247
#: ../../Firmware/ultralcd.cpp:4295 ../../Firmware/ultralcd.cpp:5759
#: ../../Firmware/ultralcd.cpp:5858
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "N/A"
msgstr "N/D"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_NEW_FIRMWARE_AVAILABLE c=20 r=2
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/util.cpp:199
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "New firmware version available:"
msgstr "Nuova vers. firmware disponibile:"
#. MSG_NO c=4
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:66 ../../Firmware/ultralcd.cpp:2823
#: ../../Firmware/ultralcd.cpp:3199 ../../Firmware/ultralcd.cpp:4804
#: ../../Firmware/ultralcd.cpp:6018
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "No"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgstr "No"
#. MSG_NO_CARD c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:5565
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "No SD card"
msgstr "Nessuna SD"
#. MSG_NO_MOVE c=20
Update Firmware.pot and Firmware_xx.po files
2022-09-29 15:52:23 +00:00
#: ../../Firmware/Marlin_main.cpp:5377
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "No move."
msgstr "Nessun movimento."
#. MSG_NONE c=8
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4424
#: ../../Firmware/ultralcd.cpp:4512 ../../Firmware/ultralcd.cpp:4521
#: ../../Firmware/ultralcd.cpp:4594 ../../Firmware/ultralcd.cpp:4603
#: ../../Firmware/ultralcd.cpp:4633 ../../Firmware/ultralcd.cpp:4642
#: ../../Firmware/ultralcd.cpp:4674 ../../Firmware/ultralcd.cpp:4683
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "None"
msgstr "Nessuno"
#. MSG_NORMAL c=7
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4355
#: ../../Firmware/ultralcd.cpp:4400 ../../Firmware/ultralcd.cpp:4416
#: ../../Firmware/ultralcd.cpp:4435 ../../Firmware/ultralcd.cpp:5785
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Normal"
msgstr "Normale"
#. MSG_SELFTEST_NOTCONNECTED c=20
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:6999
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Not connected"
msgstr "Non connesso"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SELFTEST_FAN_NO c=19
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:7198
#: ../../Firmware/ultralcd.cpp:7213 ../../Firmware/ultralcd.cpp:7221
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Not spinning"
msgstr "Non gira"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_WIZARD_V2_CAL c=20 r=8
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:3981
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"Now I will calibrate distance between tip of the nozzle and heatbed surface."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgstr "Adesso calibro la distanza fra ugello e superfice del piatto."
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_WIZARD_WILL_PREHEAT c=20 r=4
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:4110
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Now I will preheat nozzle for PLA."
msgstr "Adesso preriscaldero l'ugello per PLA."
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_REMOVE_TEST_PRINT c=20 r=4
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:4101
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Now remove the test print from steel sheet."
msgstr "Ora rimuovete la stampa di prova dalla piastra in acciaio."
#. MSG_NOZZLE c=10
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:1421
#: ../../Firmware/ultralcd.cpp:4512 ../../Firmware/ultralcd.cpp:4515
#: ../../Firmware/ultralcd.cpp:4518 ../../Firmware/ultralcd.cpp:4521
#: ../../Firmware/ultralcd.cpp:5742 ../../Firmware/ultralcd.cpp:5904
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Nozzle"
msgstr "Ugello"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_NOZZLE_DIAMETER c=10
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4565
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Nozzle d."
msgstr "Dia.Ugello"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_OFF c=3
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/menu.cpp:467 ../../Firmware/messages.cpp:122
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:4253 ../../Firmware/ultralcd.cpp:4269
#: ../../Firmware/ultralcd.cpp:4303 ../../Firmware/ultralcd.cpp:4332
#: ../../Firmware/ultralcd.cpp:4361 ../../Firmware/ultralcd.cpp:4830
#: ../../Firmware/ultralcd.cpp:4849 ../../Firmware/ultralcd.cpp:4853
#: ../../Firmware/ultralcd.cpp:5666 ../../Firmware/ultralcd.cpp:5763
#: ../../Firmware/ultralcd.cpp:5778 ../../Firmware/ultralcd.cpp:5789
#: ../../Firmware/ultralcd.cpp:5858 ../../Firmware/ultralcd.cpp:7881
#: ../../Firmware/ultralcd.cpp:7885
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Off"
msgstr "Off"
#. MSG_DEFAULT_SETTINGS_LOADED c=20 r=6
Update Firmware.pot and Firmware_xx.po files
2022-09-29 15:52:23 +00:00
#: ../../Firmware/Marlin_main.cpp:1535
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Old settings found. Default PID, Esteps etc. will be set."
msgstr ""
"Sono state trovate impostazioni vecchie. Verranno impostati i valori "
"predefiniti di PID, Esteps etc."
#. MSG_ON c=3
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:4263
#: ../../Firmware/ultralcd.cpp:4267 ../../Firmware/ultralcd.cpp:4299
#: ../../Firmware/ultralcd.cpp:4322 ../../Firmware/ultralcd.cpp:4360
#: ../../Firmware/ultralcd.cpp:4830 ../../Firmware/ultralcd.cpp:4849
#: ../../Firmware/ultralcd.cpp:4853 ../../Firmware/ultralcd.cpp:5767
#: ../../Firmware/ultralcd.cpp:5778 ../../Firmware/ultralcd.cpp:5787
#: ../../Firmware/ultralcd.cpp:5858 ../../Firmware/ultralcd.cpp:7881
#: ../../Firmware/ultralcd.cpp:7885
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "On"
msgstr "On"
#. MSG_SOUND_ONCE c=7
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4472
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Once"
msgstr "Singolo"
Update pot and po files
2022-09-14 07:16:16 +00:00
#. MSG_PAUSED_THERMAL_ERROR c=20
Update Firmware.pot and Firmware_xx.po files
2022-09-29 15:52:23 +00:00
#: ../../Firmware/Marlin_main.cpp:9718 ../../Firmware/messages.cpp:164
Update pot and po files
2022-09-14 07:16:16 +00:00
msgid "PAUSED THERMAL ERROR"
Update trasnlations for MK3_3.12 branch
2022-10-28 06:41:55 +00:00
msgstr "PAUSA ERRORE TERMICO"
Update pot and po files
2022-09-14 07:16:16 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_PID_RUNNING c=20
Update Firmware.pot and Firmware_xx.po files
2022-09-29 15:52:23 +00:00
#: ../../Firmware/ultralcd.cpp:1017
Update all po files
2021-04-29 13:41:47 +00:00
msgid "PID cal."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgstr "Calibrazione PID"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_PID_FINISHED c=20
Update Firmware.pot and Firmware_xx.po files
2022-09-29 15:52:23 +00:00
#: ../../Firmware/ultralcd.cpp:1022
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "PID cal. finished"
msgstr "Calib. PID completa"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_PID_EXTRUDER c=17
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:4932
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "PID calibration"
msgstr "Calibrazione PID"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_PINDA_PREHEAT c=20
Update Firmware.pot and Firmware_xx.po files
2022-09-29 15:52:23 +00:00
#: ../../Firmware/ultralcd.cpp:657
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "PINDA Heating"
msgstr "Riscaldamento PINDA"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_PINDA_CALIBRATION c=13
Update Firmware.pot and Firmware_xx.po files
2022-09-29 15:52:23 +00:00
#: ../../Firmware/Marlin_main.cpp:4932 ../../Firmware/Marlin_main.cpp:5035
#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:654
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:4849 ../../Firmware/ultralcd.cpp:4939
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "PINDA cal."
msgstr "Calib. PINDA"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_PINDA_CAL_FAILED c=20 r=4
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:3380
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "PINDA calibration failed"
msgstr "Calibrazione temperatura fallita"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_PINDA_CALIBRATION_DONE c=20 r=8
Update Firmware.pot and Firmware_xx.po files
2022-09-29 15:52:23 +00:00
#: ../../Firmware/Marlin_main.cpp:5112 ../../Firmware/messages.cpp:110
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:3374
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"PINDA calibration is finished and active. It can be disabled in menu "
"Settings->PINDA cal."
msgstr ""
"Calibrazione PINDA completata e attiva. Puo essere disattivata dal menu "
"Impostazioni ->Calib. PINDA"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_PAUSE c=5
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:4726
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Pause"
msgstr "Pausa"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_PAUSE_PRINT c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:5529
#: ../../Firmware/ultralcd.cpp:5531
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Pause print"
msgstr "Metti in pausa"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_PAPER c=20 r=10
Update Firmware.pot and Firmware_xx.po files
2022-09-29 15:52:23 +00:00
#: ../../Firmware/Marlin_main.cpp:3315 ../../Firmware/messages.cpp:68
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"Place a sheet of paper under the nozzle during the calibration of first 4 "
"points. If the nozzle catches the paper, power off the printer immediately."
msgstr ""
"Posizionare un foglio sotto l'ugello durante la calibrazione dei primi 4 "
"punti. In caso l'ugello muova il foglio spegnere subito la stampante."
#. MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:114 ../../Firmware/ultralcd.cpp:4195
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"Please check our handbook and fix the problem. Then resume the Wizard by "
"rebooting the printer."
msgstr ""
"Per favore consulta il nostro manuale per risolvere il problema. Poi "
"riprendi il Wizard dopo aver riavviato la stampante."
#. MSG_CHECK_IR_CONNECTION c=20 r=4
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:6280
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Please check the IR sensor connection, unload filament if present."
msgstr "Controllare il collegamento al sensore e rimuovere il filamento."
#. MSG_SELFTEST_PLEASECHECK c=20
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:6993
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Please check:"
msgstr "Verifica:"
#. MSG_WIZARD_CLEAN_HEATBED c=20 r=8
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:4167
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Please clean heatbed and then press the knob."
msgstr "Per favore pulisci il piatto, poi premi la manopola."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
Update Firmware.pot and Firmware_xx.po files
2022-09-29 15:52:23 +00:00
#: ../../Firmware/Marlin_main.cpp:3291 ../../Firmware/messages.cpp:24
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Please clean the nozzle for calibration. Click when done."
msgstr "Pulire l'ugello per la calibrazione, poi fare click."
#. MSG_WIZARD_LOAD_FILAMENT c=20 r=6
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:3964
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"Please insert filament into the extruder, then press the knob to load it."
msgstr ""
"Inserisci il filamento nell'estrusore, poi premi la manopola per caricarlo."
#. MSG_MMU_INSERT_FILAMENT_FIRST_TUBE c=20 r=6
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:3959
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"Please insert filament into the first tube of the MMU, then press the knob "
"to load it."
msgstr ""
"Per favore inserisci il filamento nel primo tubo del MMU, poi premi la "
"manopola per caricarlo."
#. MSG_PLEASE_LOAD_PLA c=20 r=4
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:3882
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Please load filament first."
msgstr "Per favore prima carica il filamento."
#. MSG_CHECK_IDLER c=20 r=5
Update Firmware.pot and Firmware_xx.po files
2022-09-29 15:52:23 +00:00
#: ../../Firmware/Marlin_main.cpp:3551
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Please open idler and remove filament manually."
msgstr "Aprire la guida filam. e rimuovere il filam. a mano"
#. MSG_PLACE_STEEL_SHEET c=20 r=5
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/mesh_bed_calibration.cpp:2799 ../../Firmware/messages.cpp:70
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:4104
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Please place steel sheet on heatbed."
msgstr "Per favore posizionate la piastra d'acciaio sul piano riscaldato."
#. MSG_PRESS_TO_UNLOAD c=20 r=4
Update Firmware.pot and Firmware_xx.po files
2022-09-29 15:52:23 +00:00
#: ../../Firmware/Marlin_main.cpp:11580 ../../Firmware/Marlin_main.cpp:11633
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:74
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Please press the knob to unload filament"
Update all po files
2021-04-29 13:41:47 +00:00
msgstr "Premete la manopola per scaricare il filamento"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_PULL_OUT_FILAMENT c=20 r=4
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:5235
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Please pull out filament immediately"
msgstr "Estrarre il filamento immediatamente"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_EJECT_REMOVE c=20 r=4
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/mmu.cpp:1082
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Please remove filament and then press the knob."
Update all po files
2021-04-29 13:41:47 +00:00
msgstr "Rimuovi il filamento e quindi premi la manopola."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_REMOVE_SHIPPING_HELPERS c=20 r=3
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:4100
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Please remove shipping helpers first."
msgstr "Per favore rimuovete i materiali da spedizione"
#. MSG_REMOVE_STEEL_SHEET c=20 r=4
Update Firmware.pot and Firmware_xx.po files
2022-09-29 15:52:23 +00:00
#: ../../Firmware/Marlin_main.cpp:3313 ../../Firmware/Marlin_main.cpp:4896
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:79
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Please remove steel sheet from heatbed."
msgstr "Rimuovete la piastra di acciaio dal piano riscaldato"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_RUN_XYZ c=20 r=4
Update Firmware.pot and Firmware_xx.po files
2022-09-29 15:52:23 +00:00
#: ../../Firmware/Marlin_main.cpp:4872
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Please run XYZ calibration first."
Update all po files
2021-04-29 13:41:47 +00:00
msgstr "Esegui la calibrazione XYZ prima."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_UNLOAD_FILAMENT_REPEAT c=20 r=4
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:6277
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Please unload the filament first, then repeat this action."
msgstr "Scaricare prima il filamento, poi ripetere l'operazione."
#. MSG_UPDATE_MMU2_FW c=20 r=4
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/mmu.cpp:1002
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Please update firmware in your MMU2. Waiting for reset."
Update all po files
2021-04-29 13:41:47 +00:00
msgstr "Aggiorna il firmware sul tuo MMU2. In attesa di reset."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_NEW_FIRMWARE_PLEASE_UPGRADE c=20
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/util.cpp:203
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Please upgrade."
msgstr "Prego aggiornare."
#. MSG_PLEASE_WAIT c=20
Update Firmware.pot and Firmware_xx.po files
2022-09-29 15:52:23 +00:00
#: ../../Firmware/Marlin_main.cpp:3547 ../../Firmware/Marlin_main.cpp:3563
#: ../../Firmware/Marlin_main.cpp:7931 ../../Firmware/messages.cpp:71
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:2205 ../../Firmware/ultralcd.cpp:2216
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Please wait"
msgstr "Attendere"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_POWER_FAILURES c=15
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:72 ../../Firmware/ultralcd.cpp:1238
#: ../../Firmware/ultralcd.cpp:1279 ../../Firmware/ultralcd.cpp:1289
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Power failures"
msgstr "Interr. corr."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_PREHEAT c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:5524
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Preheat"
msgstr "Preriscalda"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_PREHEAT_NOZZLE c=20
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:2299
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Preheat the nozzle!"
msgstr "Prerisc. ugello!"
#. MSG_WIZARD_HEATING c=20 r=3
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:116 ../../Firmware/ultralcd.cpp:2919
#: ../../Firmware/ultralcd.cpp:3943 ../../Firmware/ultralcd.cpp:3945
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Preheating nozzle. Please wait."
msgstr "Preriscaldando l'ugello. Attendere prego."
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_PREHEATING_TO_CUT c=20
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:2007
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Preheating to cut"
msgstr "Preriscalda. taglio"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_PREHEATING_TO_EJECT c=20
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:2004
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Preheating to eject"
msgstr "Preriscalda. espuls."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_PREHEATING_TO_LOAD c=20
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:1995
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Preheating to load"
msgstr "Preriscald. carico"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_PREHEATING_TO_UNLOAD c=20
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:2000
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Preheating to unload"
msgstr "Preriscald. scarico"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_PRESS_KNOB c=20
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:1828
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Press the knob"
msgstr "Premere la manopola"
#. MSG_PRESS_TO_PREHEAT c=20 r=4
Update Firmware.pot and Firmware_xx.po files
2022-09-29 15:52:23 +00:00
#: ../../Firmware/Marlin_main.cpp:11611
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Press the knob to preheat nozzle and continue."
msgstr "Premete la manopola per preriscaldare l'ugello e continuare."
#. MSG_RESUME_NOZZLE_TEMP c=20 r=4
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/mmu.cpp:727
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Press the knob to resume nozzle temperature."
msgstr "Premete la manopola per recuperare la temperatura dell'ugello."
#. MSG_PRINT_ABORTED c=20
Update Firmware.pot and Firmware_xx.po files
2022-09-29 15:52:23 +00:00
#: ../../Firmware/messages.cpp:75 ../../Firmware/ultralcd.cpp:852
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Print aborted"
msgstr "Stampa interrotta"
rename `Extruder fan` to `Hotend fan` Fix cherry-pick issues
2022-10-17 11:49:18 +00:00
#. MSG_PRINT_FAN_SPEED c=15
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1145
#: ../../Firmware/ultralcd.cpp:7354
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Print fan:"
msgstr "Vent.stam:"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_CARD_MENU c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5557
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Print from SD"
msgstr "Stampa da SD"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_PRINT_PAUSED c=20
Update Firmware.pot and Firmware_xx.po files
2022-09-29 15:52:23 +00:00
#: ../../Firmware/ultralcd.cpp:866
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Print paused"
msgstr "Stampa in pausa"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_PRINT_TIME c=19
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:2385
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Print time"
msgstr "Tempo di stampa"
#. MSG_PRINTER_IP c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:1730
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Printer IP Addr:"
msgstr "Ind. IP stampante:"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
Update Firmware.pot and Firmware_xx.po files
2022-09-29 15:52:23 +00:00
#: ../../Firmware/Marlin_main.cpp:1548 ../../Firmware/messages.cpp:42
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"Printer has not been calibrated yet. Please follow the manual, chapter First "
"steps, section Calibration flow."
msgstr ""
"Stampante non ancora calibrata. Si prega di seguire il manuale, capitolo "
"Primi Passi, sezione Sequenza di Calibrazione."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_NOZZLE_DIFFERS_CONTINUE c=20 r=5
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/util.cpp:299
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Printer nozzle diameter differs from the G-code. Continue?"
msgstr "Diametro ugello diverso da G-Code. Continuare?"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_NOZZLE_DIFFERS_CANCELLED c=20 r=9
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/util.cpp:305
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"Printer nozzle diameter differs from the G-code. Please check the value in "
"settings. Print cancelled."
msgstr ""
"Diametro ugello diverso dal G-Code. Controlla il valore nelle impostazioni. "
"Stampa annullata."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_RPI_PORT c=13
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4853
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "RPi port"
msgstr "Porta RPi"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_BED_CORRECTION_REAR c=14
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:2774
Update all po files
2022-02-08 13:48:16 +00:00
msgid "Rear side [μm]"
msgstr "Retro [μm]"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_RECOVERING_PRINT c=20
Update Firmware.pot and Firmware_xx.po files
2022-09-29 15:52:23 +00:00
#: ../../Firmware/Marlin_main.cpp:10954
Update all po files
2021-04-29 13:41:47 +00:00
msgid "Recovering print"
msgstr "Recupero stampa"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_REMOVE_OLD_FILAMENT c=20 r=5
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/mmu.cpp:831
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Remove old filament and press the knob to start loading new filament."
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgstr ""
"Rimuovi il filamento precedente e premi la manopola per caricare il nuovo "
"filamento."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_RENAME c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:5448
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Rename"
msgstr "Rinomina"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_RESET c=14
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:2775
#: ../../Firmware/ultralcd.cpp:5449
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Reset"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgstr "Reset"
#. MSG_CALIBRATE_BED_RESET c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:4936
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Reset XYZ calibr."
msgstr "Reset calibr. XYZ."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_RESUME_PRINT c=18
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/Marlin_main.cpp:655 ../../Firmware/messages.cpp:81
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:5543 ../../Firmware/ultralcd.cpp:5545
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Resume print"
msgstr "Riprendi stampa"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_RESUMING_PRINT c=20
Update Firmware.pot and Firmware_xx.po files
2022-09-29 15:52:23 +00:00
#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:665
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Resuming print"
msgstr "Riprendi stampa"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_RIGHT c=10
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:2516
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Right"
msgstr "Destra"
#. MSG_BED_CORRECTION_RIGHT c=14
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:2772
Update all po files
2022-02-08 13:48:16 +00:00
msgid "Right side[μm]"
msgstr "Destra [μm]"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_WIZARD_RERUN c=20 r=7
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:3903
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"Running Wizard will delete current calibration results and start from the "
"beginning. Continue?"
msgstr ""
"Se avvi il Wizard perderai la calibrazione preesistente e dovrai "
"ricominciare dall'inizio. Continuare?"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_RUNOUTS c=7
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:1290
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Runouts"
msgstr "Esaurim"
#. MSG_SD_CARD c=8
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:135 ../../Firmware/ultralcd.cpp:4414
#: ../../Firmware/ultralcd.cpp:4416 ../../Firmware/ultralcd.cpp:4433
#: ../../Firmware/ultralcd.cpp:4435
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "SD card"
msgstr "Mem. SD"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_STOPPED c=20
Update Firmware.pot and Firmware_xx.po files
2022-09-29 15:52:23 +00:00
#: ../../Firmware/Marlin_main.cpp:9747 ../../Firmware/messages.cpp:108
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "STOPPED."
msgstr "ARRESTATO."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=3
Update Firmware.pot and Firmware_xx.po files
2022-09-29 15:52:23 +00:00
#: ../../Firmware/Marlin_main.cpp:3297 ../../Firmware/Marlin_main.cpp:3317
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/mesh_bed_calibration.cpp:2234 ../../Firmware/messages.cpp:40
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Searching bed calibration point"
Update all po files
2021-04-29 13:41:47 +00:00
msgstr "Ricerca punti calibrazione piano"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SELECT c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:5441
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Select"
msgstr "Seleziona"
#. MSG_SELECT_FIL_1ST_LAYERCAL c=20 r=7
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:3985
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"Select a filament for the First Layer Calibration and select it in the on-"
"screen menu."
msgstr ""
"Scegli un filamento per la calibrazione del primo strato e selezionalo nel "
"menu sullo schermo."
#. MSG_SELECT_EXTRUDER c=20
Update Firmware.pot and Firmware_xx.po files
2022-09-29 15:52:23 +00:00
#: ../../Firmware/Marlin_main.cpp:8608 ../../Firmware/messages.cpp:50
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Select extruder:"
msgstr "Seleziona estrusore:"
#. MSG_SELECT_FILAMENT c=20
Update Firmware.pot and Firmware_xx.po files
2022-09-29 15:52:23 +00:00
#: ../../Firmware/Marlin_main.cpp:8577 ../../Firmware/Marlin_main.cpp:8604
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:51 ../../Firmware/ultralcd.cpp:3853
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Select filament:"
msgstr "Seleziona il filam.:"
Update pot and po files
2022-09-14 07:16:16 +00:00
#. MSG_SELECT_LANGUAGE c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:3698
#: ../../Firmware/ultralcd.cpp:4860
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Select language"
msgstr "Seleziona lingua"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SEL_PREHEAT_TEMP c=20 r=6
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:4141
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Select nozzle preheat temperature which matches your material."
msgstr ""
"Selezionate la temperatura per il preriscaldamento dell'ugello adatta al "
"vostro materiale."
#. MSG_SELECT_TEMP_MATCHES_MATERIAL c=20 r=4
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:3990
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Select temperature which matches your material."
msgstr "Seleziona la temperatura appropriata per il tuo materiale."
#. MSG_SELFTEST_OK c=20
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:6552
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Self test OK"
msgstr "Autotest OK"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SELFTEST_START c=20
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:6320
Update all po files
2021-04-29 13:41:47 +00:00
msgid "Self test start"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgstr "Avvia autotest"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SELFTEST c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:4923
Update all po files
2021-04-29 13:41:47 +00:00
msgid "Selftest"
msgstr "Autotest"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SELFTEST_ERROR c=20
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:6992
Update all po files
2021-04-29 13:41:47 +00:00
msgid "Selftest error!"
msgstr "Errore Autotest!"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SELFTEST_FAILED c=20
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:85 ../../Firmware/ultralcd.cpp:6556
#: ../../Firmware/ultralcd.cpp:7079 ../../Firmware/ultralcd.cpp:7344
Update all po files
2021-04-29 13:41:47 +00:00
msgid "Selftest failed"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgstr "Autotest fallito"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_FORCE_SELFTEST c=20 r=8
Update Firmware.pot and Firmware_xx.po files
2022-09-29 15:52:23 +00:00
#: ../../Firmware/Marlin_main.cpp:1567
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Selftest will be run to calibrate accurate sensorless rehoming."
msgstr "Verra effettuato un self test per calibrare l'homing senza sensori"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_INFO_SENSORS c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:1742
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Sensor info"
msgstr "Info Sensore"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_FS_VERIFIED c=20 r=3
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:6284
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Sensor verified, remove the filament now."
msgstr "Sensore verificato, rimuovere il filamento."
#. MSG_SET_TEMPERATURE c=20
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:2792
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Set temperature:"
Update all po files
2021-04-29 13:41:47 +00:00
msgstr "Imposta temperatura:"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SETTINGS c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:3510
#: ../../Firmware/ultralcd.cpp:3715 ../../Firmware/ultralcd.cpp:4225
#: ../../Firmware/ultralcd.cpp:5602 ../../Firmware/ultralcd.cpp:5849
#: ../../Firmware/ultralcd.cpp:5902
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Settings"
msgstr "Impostazioni"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SEVERE_SKEW c=14
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:2559
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Severe skew"
msgstr "Deviaz. forte"
#. MSG_SHEET c=10
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/menu.cpp:209 ../../Firmware/menu.cpp:221
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:60
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Sheet"
msgstr "Piano"
#. MSG_SHEET_OFFSET c=20 r=4
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:3843
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"Sheet %.7s\n"
"Z offset: %+1.3fmm\n"
"%cContinue\n"
"%cReset"
msgstr ""
"Piano %.7s\n"
"Z offset: %+1.3fmm\n"
"%cContinuare\n"
"%cReset"
#. MSG_SHOW_END_STOPS c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:4934
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Show end stops"
msgstr "Stato finecorsa"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SILENT c=7
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4380
#: ../../Firmware/ultralcd.cpp:4475 ../../Firmware/ultralcd.cpp:5800
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Silent"
msgstr "Silenz."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SLIGHT_SKEW c=14
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:2558
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Slight skew"
msgstr "Deviaz. lieve"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_FILE_CNT c=20 r=6
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/cardreader.cpp:818
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"Some files will not be sorted. Max. No. of files in 1 folder for sorting is "
"100."
msgstr ""
"Alcuni file non saranno ordinati. Il numero massimo di file in una cartella "
"e 100 perche siano ordinati."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_ZLEVELING_ENFORCED c=20 r=4
Update Firmware.pot and Firmware_xx.po files
2022-09-29 15:52:23 +00:00
#: ../../Firmware/Marlin_main.cpp:3060
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Some problem encountered, Z-leveling enforced ..."
msgstr "Sono stati rilevati problemi, avviato livellamento Z ..."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SORT c=7
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:136 ../../Firmware/ultralcd.cpp:4422
#: ../../Firmware/ultralcd.cpp:4423 ../../Firmware/ultralcd.cpp:4424
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Sort"
msgstr "Ordina"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SORTING_FILES c=20
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/cardreader.cpp:862 ../../Firmware/cardreader.cpp:929
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:96
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Sorting files"
msgstr "Ordinando i file"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SOUND c=9
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4469
#: ../../Firmware/ultralcd.cpp:4472 ../../Firmware/ultralcd.cpp:4475
#: ../../Firmware/ultralcd.cpp:4478 ../../Firmware/ultralcd.cpp:4481
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Sound"
msgstr "Suono"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SPEED c=15
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:5740
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Speed"
msgstr "Velocita"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SELFTEST_FAN_YES c=19
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7196
#: ../../Firmware/ultralcd.cpp:7211 ../../Firmware/ultralcd.cpp:7219
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Spinning"
msgstr "Gira"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_TEMP_CAL_WARNING c=20 r=4
Update Firmware.pot and Firmware_xx.po files
2022-09-29 15:52:23 +00:00
#: ../../Firmware/Marlin_main.cpp:4885
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Stable ambient temperature 21-26C is needed a rigid stand is required."
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgstr ""
"Sono necessari una temperatura ambiente di 21-26C e una superficie rigida."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_STATISTICS c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:5607
Update all po files
2021-04-29 13:41:47 +00:00
msgid "Statistics"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgstr "Statistiche"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_STEALTH c=7
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4357
#: ../../Firmware/ultralcd.cpp:4401 ../../Firmware/ultralcd.cpp:5792
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Stealth"
msgstr "Silenz."
#. MSG_STEEL_SHEETS c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:4782
#: ../../Firmware/ultralcd.cpp:5438
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Steel sheets"
msgstr "Piani d'acciaio"
#. MSG_STOP_PRINT c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:5550
#: ../../Firmware/ultralcd.cpp:6017
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Stop print"
msgstr "Arresta stampa"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_STRICT c=8
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:128 ../../Firmware/ultralcd.cpp:4518
#: ../../Firmware/ultralcd.cpp:4600 ../../Firmware/ultralcd.cpp:4639
#: ../../Firmware/ultralcd.cpp:4680
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Strict"
msgstr "Esatto"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SUPPORT c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:5616
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Support"
msgstr "Supporto"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SELFTEST_SWAPPED c=16
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:7051
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Swapped"
msgstr "Scambiato"
Update pot and po files
2022-09-14 07:16:16 +00:00
#. MSG_THERMAL_ANOMALY c=20
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:166 ../../Firmware/temperature.cpp:2442
Update pot and po files
2022-09-14 07:16:16 +00:00
msgid "THERMAL ANOMALY"
Update trasnlations for MK3_3.12 branch
2022-10-28 06:41:55 +00:00
msgstr "ANOMALIA TERMICA"
Update pot and po files
2022-09-14 07:16:16 +00:00
Update Temp Model messages Deepl translate cs,de,es,fr,it,nl,pl
2022-11-20 09:49:46 +00:00
#. MSG_TM_CAL c=20 r=4
#: ../../Firmware/ultralcd.cpp:4054
Fix typo Add Norwegian translations thanks to @OS-kar
2022-11-22 07:26:20 +00:00
msgid "Temp model cal. takes approx. 12 mins."
Update Temp Model messages Deepl translate cs,de,es,fr,it,nl,pl
2022-11-20 09:49:46 +00:00
msgstr "La calibrazione del modello di temperatura richiede circa 12 minuti."
#. MSG_TM_NOT_CAL c=20 r=4
#: ../../Firmware/Marlin_main.cpp:1527 ../../Firmware/Marlin_main.cpp:3404
#: ../../Firmware/messages.cpp:170
msgid "Temp model not calibrated yet."
msgstr "Modello di temperatura non ancora calibrato."
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_TEMPERATURE c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:4816
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Temperature"
msgstr "Temperatura"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_MENU_TEMPERATURES c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:1748
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Temperatures"
msgstr "Temperature"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_WIZARD_V2_CAL_2 c=20 r=12
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:3993
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"The printer will start printing a zig-zag line. Rotate the knob until you "
"reach the optimal height. Check the pictures in the handbook (Calibration "
"chapter)."
msgstr ""
"La stampante iniziera a stampare una linea a zig-zag. Gira la manopola fino "
"a che non hai raggiungo l'altezza ottimale. Verifica con le immagini nel "
"manuale (capitolo sulla calibrazione)."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_FOLLOW_Z_CALIBRATION_FLOW c=20 r=9
Update Firmware.pot and Firmware_xx.po files
2022-09-29 15:52:23 +00:00
#: ../../Firmware/Marlin_main.cpp:1561 ../../Firmware/messages.cpp:43
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"There is still a need to make Z calibration. Please follow the manual, "
"chapter First steps, section Calibration flow."
msgstr ""
"E ancora necessario effettuare la calibrazione Z. Segui il manuale, capitolo "
"Primi Passi, sezione Sequenza di Calibrazione."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SORT_TIME c=8
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4422
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Time"
msgstr "Cron."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_TIMEOUT c=12
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:5887
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Timeout"
msgstr "Timeout"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_TOTAL c=6
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:1168
#: ../../Firmware/ultralcd.cpp:1316
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Total"
msgstr "Totale"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_TOTAL_FAILURES c=20
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:1211
#: ../../Firmware/ultralcd.cpp:1237 ../../Firmware/ultralcd.cpp:1347
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Total failures"
msgstr "Totale fallimenti"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_TOTAL_FILAMENT c=19
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:2406
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Total filament"
msgstr "Filamento totale"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_TOTAL_PRINT_TIME c=19
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:2407
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Total print time"
msgstr "Tempo stampa totale"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_TUNE c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:5522
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Tune"
msgstr "Regola"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_UNLOAD_FILAMENT c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5586
#: ../../Firmware/ultralcd.cpp:5600
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Unload filament"
Update all po files
2021-04-29 13:41:47 +00:00
msgstr "Scarica filam."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_UNLOADING_FILAMENT c=20
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:112 ../../Firmware/mmu.cpp:957
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:5219
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Unloading filament"
msgstr "Scaricando filamento"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_FIL_FAILED c=20 r=5
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:6288
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Verification failed, remove the filament and try again."
msgstr "Verifica fallita, rimuovere il filamento e riprovare."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_MENU_VOLTAGES c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:1751
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Voltages"
msgstr "Voltaggi"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:3553
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"WARNING:\n"
"Crash detection\n"
"disabled in\n"
"Stealth mode"
msgstr ""
"ATTENZIONE:\n"
"Rilev. impatto\n"
"disattivato in\n"
"Modalita silenziosa"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_USERWAIT c=20
Update Firmware.pot and Firmware_xx.po files
2022-09-29 15:52:23 +00:00
#: ../../Firmware/Marlin_main.cpp:4090
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Wait for user..."
msgstr "Attendendo utente..."
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_WAITING_TEMP_PINDA c=20 r=3
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:2900
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Waiting for PINDA probe cooling"
msgstr "In attesa del raffreddamento della sonda PINDA"
#. MSG_WAITING_TEMP c=20 r=4
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:2932
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Waiting for nozzle and bed cooling"
msgstr "In attesa del raffreddamento dell'ugello e del piano"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_WARN c=8
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:127 ../../Firmware/ultralcd.cpp:4515
#: ../../Firmware/ultralcd.cpp:4597 ../../Firmware/ultralcd.cpp:4636
#: ../../Firmware/ultralcd.cpp:4677
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Warn"
msgstr "Avviso"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_CHANGED_BOTH c=20 r=4
Update Firmware.pot and Firmware_xx.po files
2022-09-29 15:52:23 +00:00
#: ../../Firmware/Marlin_main.cpp:1527
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Warning: both printer type and motherboard type changed."
msgstr "Attenzione: tipo di stampante e di scheda madre cambiati."
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_CHANGED_MOTHERBOARD c=20 r=4
Update Firmware.pot and Firmware_xx.po files
2022-09-29 15:52:23 +00:00
#: ../../Firmware/Marlin_main.cpp:1519
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Warning: motherboard type changed."
msgstr "Avviso: tipo di scheda madre cambiato"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_CHANGED_PRINTER c=20 r=4
Update Firmware.pot and Firmware_xx.po files
2022-09-29 15:52:23 +00:00
#: ../../Firmware/Marlin_main.cpp:1523
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Warning: printer type changed."
msgstr "Avviso: tipo di stampante cambiato."
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_UNLOAD_SUCCESSFUL c=20 r=2
Update Firmware.pot and Firmware_xx.po files
2022-09-29 15:52:23 +00:00
#: ../../Firmware/Marlin_main.cpp:3542
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Was filament unload successful?"
msgstr "Filamento scaricato con successo?"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SELFTEST_WIRINGERROR c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:7003
#: ../../Firmware/ultralcd.cpp:7007 ../../Firmware/ultralcd.cpp:7027
#: ../../Firmware/ultralcd.cpp:7033 ../../Firmware/ultralcd.cpp:7057
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Wiring error"
msgstr "Errore cablaggio"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_WIZARD c=17
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:4914
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Wizard"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgstr "Wizard"
#. MSG_X_CORRECTION c=13
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:4229
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "X-correct:"
msgstr "Correzione-X:"
Update pot and po files
2022-09-14 07:16:16 +00:00
#. MSG_XFLASH c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:5618
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "XFLASH init"
Update trasnlations for MK3_3.12 branch
2022-10-28 06:41:55 +00:00
msgstr "Inizializza XFLASH"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_XYZ_DETAILS c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:1740
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "XYZ cal. details"
msgstr "XYZ Cal. dettagli"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME c=20 r=8
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:3352
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "XYZ calibration all right. Skew will be corrected automatically."
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgstr ""
"Calibrazione XYZ corretta. La distorsione verra compensata automaticamente."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD c=20 r=8
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:3349
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "XYZ calibration all right. X/Y axes are slightly skewed. Good job!"
msgstr "Calibrazion XYZ corretta. Assi X/Y leggermente storti. Ben fatto!"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR c=20 r=8
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:3330
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "XYZ calibration compromised. Front calibration points not reachable."
msgstr "Calibrazione XYZ compromessa. Punti anteriori non raggiungibili."
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR c=20 r=8
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:3333
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"XYZ calibration compromised. Right front calibration point not reachable."
msgstr ""
"Calibrazione XYZ compromessa. Punto anteriore destro non raggiungibile."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND c=20 r=6
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:3312
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "XYZ calibration failed. Bed calibration point was not found."
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgstr ""
"Calibrazione XYZ fallita. Il punto di calibrazione sul piano non e' stato "
"trovato."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=6
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:3318
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "XYZ calibration failed. Front calibration points not reachable."
msgstr "Calibrazione XYZ fallita. Punti anteriori non raggiungibili."
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3315
#: ../../Firmware/ultralcd.cpp:3343
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "XYZ calibration failed. Please consult the manual."
msgstr "Calibrazione XYZ fallita. Si prega di consultare il manuale."
#. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=6
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:3321
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "XYZ calibration failed. Right front calibration point not reachable."
msgstr "Calibrazione XYZ fallita. Punto anteriore destro non raggiungibile."
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:3346
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!"
msgstr "Calibrazione XYZ OK. Gli assi X/Y sono perpendicolari. Complimenti!"
#. MSG_Y_DIST_FROM_MIN c=20
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:2513
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Y distance from min"
msgstr "Distanza Y dal min"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_Y_CORRECTION c=13
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:4230
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Y-correct:"
msgstr "Correzione-Y:"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_YES c=4
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2235
#: ../../Firmware/ultralcd.cpp:2819 ../../Firmware/ultralcd.cpp:3199
#: ../../Firmware/ultralcd.cpp:4804 ../../Firmware/ultralcd.cpp:6019
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Yes"
msgstr "Si"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_WIZARD_QUIT c=20 r=8
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:4206
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "You can always resume the Wizard from Calibration -> Wizard."
msgstr ""
"E possibile riprendere il Wizard in qualsiasi momento attraverso "
"Calibrazione -> Wizard."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_Z_CORRECTION c=13
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:4231
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Z-correct:"
msgstr "Correzione-Z:"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_Z_PROBE_NR c=14
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:5857
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Z-probe nr."
msgstr "Nr. Z-test"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_MEASURED_OFFSET c=20
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:2584
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "[0;0] point offset"
msgstr "[0;0] punto offset"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_PRESS c=20 r=2
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:2173
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "and press the knob"
msgstr "e cliccare manopola"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_TO_LOAD_FIL c=20
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:1835
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "to load filament"
msgstr "per caricare il fil."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_TO_UNLOAD_FIL c=20
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:1839
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "to unload filament"
msgstr "per scaricare fil."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_UNKNOWN c=13
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/ultralcd.cpp:1707
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "unknown"
msgstr "sconosciuto"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_IR_UNKNOWN c=18
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/fsensor.cpp:182 ../../Firmware/messages.cpp:162
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "unknown state"
msgstr "stato sconosciuto"
Update po files after fixing lang-export and lang-import
2021-12-21 13:31:04 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_REFRESH c=18
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#: ../../Firmware/messages.cpp:78 ../../Firmware/ultralcd.cpp:6107
#: ../../Firmware/ultralcd.cpp:6110
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "🔃Refresh"
msgstr "🔃Ricaricare"
Update pot and po files
2022-09-14 07:16:16 +00:00
#~ msgid "Crash detected. Resume print?"
#~ msgstr "Scontro rilevato. Riprendere la stampa?"
#~ msgid "M117 First layer cal."
#~ msgstr "M117 Calibr. primo strato"
Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 Fix eeprom documentation Update pot and po files as pre-release task Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
2022-11-07 09:37:43 +00:00
#~ msgid "TM autotune failed"
#~ msgstr "Autocal. MT fallita"
#~ msgid "Temp. model autotune"
#~ msgstr "Cal. modello termico"
#~ msgid "XYZ calibration failed. Left front calibration point not reachable."
#~ msgstr ""
#~ "Calibrazione XYZ fallita. Punto anteriore sinistro non raggiungibile."
Reference in New Issue Copy Permalink