2020-03-12 11:34:33 +00:00
/**
* @ file
2020-03-22 14:22:14 +00:00
* @ author 3 d - gussner
2020-03-12 11:34:33 +00:00
*/
/** \ingroup eeprom_table */
2020-03-23 14:47:59 +00:00
2020-03-12 11:34:33 +00:00
//! _This is a EEPROM table of currently implemented in Prusa firmware (dynamically generated from doxygen)._
2018-07-23 18:04:47 +00:00
# ifndef EEPROM_H
# define EEPROM_H
2019-06-20 14:40:53 +00:00
# include <stdint.h>
2019-10-01 14:57:37 +00:00
# define MAX_SHEETS 8
# define MAX_SHEET_NAME_LENGTH 7
2019-07-09 11:38:58 +00:00
typedef struct
{
2019-10-01 14:57:37 +00:00
char name [ MAX_SHEET_NAME_LENGTH ] ; //!< Can be null terminated, doesn't need to be null terminated
2019-07-09 11:38:58 +00:00
int16_t z_offset ; //!< Z_BABYSTEP_MIN .. Z_BABYSTEP_MAX = Z_BABYSTEP_MIN*2/1000 [mm] .. Z_BABYSTEP_MAX*2/1000 [mm]
2022-05-11 09:15:36 +00:00
uint8_t bed_temp ; //!< 0 .. 254 [°C] NOTE: currently only written-to and never used
uint8_t pinda_temp ; //!< 0 .. 254 [°C] NOTE: currently only written-to and never used
2019-07-09 11:38:58 +00:00
} Sheet ;
typedef struct
{
2019-10-01 14:57:37 +00:00
Sheet s [ MAX_SHEETS ] ;
2019-07-09 11:38:58 +00:00
uint8_t active_sheet ;
} Sheets ;
// sizeof(Sheets). Do not change it unless EEPROM_Sheets_base is last item in EEPROM.
// Otherwise it would move following items.
2019-08-29 15:21:08 +00:00
# define EEPROM_SHEETS_SIZEOF 89
2019-07-09 11:38:58 +00:00
# ifdef __cplusplus
static_assert ( sizeof ( Sheets ) = = EEPROM_SHEETS_SIZEOF , " Sizeof(Sheets) is not EEPROM_SHEETS_SIZEOF. " ) ;
# endif
2020-03-12 11:34:33 +00:00
/** @defgroup eeprom_table EEPROM Table
*
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
EEPROM 8 - bit Empty value = 0xFF h 255
EEPROM 16 - bit Empty value = 0xFFFF h 65535
2020-03-23 14:47:59 +00:00
_Italic = unused or default_
2020-03-22 14:18:45 +00:00
__Bold = Status__
2020-03-23 15:54:35 +00:00
In Default / FactoryReset column the
2020-03-23 16:10:40 +00:00
- __L__ Language
2020-03-23 15:54:35 +00:00
- __S__ Statistics
- __P__ Shipping prep
2021-02-28 17:18:06 +00:00
- __M__ Service / Maintenance prep
2020-03-23 15:54:35 +00:00
- __S / P__ Statistics and Shipping prep
will overwrite existing values to 0 or default .
2020-03-25 16:44:43 +00:00
A FactoryReset All Data will overwrite the whole EEPROM with ffh and some values will be initialized automatically ,
2020-03-23 16:10:40 +00:00
others need a reset / reboot .
2020-03-23 15:54:35 +00:00
2020-03-12 11:34:33 +00:00
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
How can you use the debug codes ?
- Serial terminal like Putty .
- Octoprint does support D - codes
2020-03-23 10:40:07 +00:00
- _Pronterface_ does __not__ support D - codes
2020-03-12 11:34:33 +00:00
2020-03-22 13:08:21 +00:00
# ## !!! D-codes are case sensitive so please don't use upper case A,C or X in the address you want to read !!!
2020-03-23 10:40:07 +00:00
2020-03-23 14:47:59 +00:00
# ### Useful tools / links:
2020-03-23 10:40:07 +00:00
To convert hex to ascii https : //www.rapidtables.com/convert/number/hex-to-ascii.html
2020-03-22 13:08:21 +00:00
2020-03-23 10:40:07 +00:00
To convert hex to dec https : //www.rapidtables.com/convert/number/hex-to-decimal.html
2020-03-30 14:24:20 +00:00
Version : 1.0 .1
2020-03-22 14:22:14 +00:00
2020-03-12 11:34:33 +00:00
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
2020-03-20 09:44:12 +00:00
2020-03-23 14:47:59 +00:00
| Address begin | Bit / Type | Name | Valid values | Default / FactoryReset | Description | Gcode / Function | Debug code
2020-03-22 14:18:45 +00:00
| : - - | : - - | : - - | : - - : | : - - : | : - - | : - - : | : - - :
| 0x0FFF h 4095 | uchar | EEPROM_SILENT | 00 h 0 | ffh 255 | TMC Stealth mode : __off__ / miniRambo Power mode | LCD menu | D3 Ax0fff C1
| ^ | ^ | ^ | 01 h 1 | ^ | TMC Stealth mode : __on__ / miniRambo Silent mode | ^ | ^
2020-05-12 20:23:40 +00:00
| ^ | ^ | ^ | 02 h 2 | ^ | miniRambo Auto mode | ^ | ^
2020-03-23 16:10:40 +00:00
| 0x0FFE h 4094 | uchar | EEPROM_LANG | 00 h 0 | ffh 255 __L__ | English / LANG_ID_PRI | LCD menu | D3 Ax0ffe C1
2020-03-20 11:36:26 +00:00
| ^ | ^ | ^ | 01 h 1 | ^ | Other language LANG_ID_SEC | ^ | ^
2020-03-23 10:40:07 +00:00
| 0x0FFC h 4092 | uint16 | EEPROM_BABYSTEP_X | ? ? ? | ff ffh 65535 | Babystep for X axis _unsued_ | ? ? ? | D3 Ax0ffc C2
| 0x0FFA h 4090 | uint16 | EEPROM_BABYSTEP_Y | ? ? ? | ff ffh 65535 | Babystep for Y axis _unsued_ | ^ | D3 Ax0ffa C2
| 0x0FF8 h 4088 | uint16 | EEPROM_BABYSTEP_Z | ? ? ? | ff ffh 65535 | Babystep for Z axis _lagacy_ | ^ | D3 Ax0ff8 C2
2020-03-20 11:36:26 +00:00
| ^ | ^ | ^ | ^ | ^ | multiple values stored now in EEPROM_Sheets_base | ^ | ^
2020-03-23 14:47:59 +00:00
| 0x0FF7 h 4087 | uint8 | EEPROM_CALIBRATION_STATUS | ffh 255 | ffh 255 | Assembled _default_ | ? ? ? | D3 Ax0ff7 C1
2020-03-20 11:36:26 +00:00
| ^ | ^ | ^ | 01 h 1 | ^ | Calibrated | ^ | ^
2020-03-23 10:40:07 +00:00
| ^ | ^ | ^ | e6h 230 | ^ | needs Live Z adjustment | ^ | ^
2020-03-23 16:10:40 +00:00
| ^ | ^ | ^ | f0h 240 | ^ __P__ | needs Z calibration | ^ | ^
2020-03-23 10:40:07 +00:00
| ^ | ^ | ^ | fah 250 | ^ | needs XYZ calibration | ^ | ^
| ^ | ^ | ^ | 00 h 0 | ^ | Unknown | ^ | ^
| 0x0FF5 h 4085 | uint16 | EEPROM_BABYSTEP_Z0 | ? ? ? | ff ffh 65535 | Babystep for Z ? ? ? | ? ? ? | D3 Ax0ff5 C2
2020-03-23 15:54:35 +00:00
| 0x0FF1 h 4081 | uint32 | EEPROM_FILAMENTUSED | ? ? ? | 00 00 00 00 h 0 __S / P__ | Filament used in meters | ? ? ? | D3 Ax0ff1 C4
| 0x0FED h 4077 | uint32 | EEPROM_TOTALTIME | ? ? ? | 00 00 00 00 h 0 __S / P__ | Total print time | ? ? ? | D3 Ax0fed C4
2020-03-23 10:40:07 +00:00
| 0x0FE5 h 4069 | float | EEPROM_BED_CALIBRATION_CENTER | ? ? ? | ff ff ff ffh | ? ? ? | ? ? ? | D3 Ax0fe5 C8
| 0x0FDD h 4061 | float | EEPROM_BED_CALIBRATION_VEC_X | ? ? ? | ff ff ff ffh | ? ? ? | ? ? ? | D3 Ax0fdd C8
| 0x0FD5 h 4053 | float | EEPROM_BED_CALIBRATION_VEC_Y | ? ? ? | ff ff ff ffh | ? ? ? | ? ? ? | D3 Ax0fd5 C8
| 0x0FC5 h 4037 | int16 | EEPROM_BED_CALIBRATION_Z_JITTER | ? ? ? | ff ffh 65535 | ? ? ? | ? ? ? | D3 Ax0fc5 C16
2020-03-23 16:10:40 +00:00
| 0x0FC4 h 4036 | bool | EEPROM_FARM_MODE | 00 h 0 | ffh 255 __P__ | Prusa farm mode : __off__ | G99 | D3 Ax0fc4 C1
2020-03-22 14:18:45 +00:00
| ^ | ^ | ^ | 01 h 1 | ^ | Prusa farm mode : __on__ | G98 | ^
2020-03-23 10:40:07 +00:00
| 0x0FC3 h 4035 | free | _EEPROM_FREE_NR1_ | ? ? ? | ffh 255 | _Free EEPROM space_ | _free space_ | D3 Ax0fc3 C1
2020-03-23 16:10:40 +00:00
| 0x0FC1 h 4033 | ? ? ? | EEPROM_FARM_NUMBER | 000 - 999 | ff ffh / 000 __P__ | Prusa farm number _only 0 - 9 are allowed : 000 - 999 _ | LCD menu | D3 Ax0fc1 C2
2020-03-20 11:36:26 +00:00
| 0x0FC0 h 4032 | bool | EEPROM_BED_CORRECTION_VALID | 00 h 0 | 00 h 0 | Bed correction invalid | ? ? ? | D3 Ax0fc0 C1
2020-03-22 14:18:45 +00:00
| ^ | ^ | ^ | ffh 255 | | Bed correction valid | ? ? ? | ^
2020-03-23 10:40:07 +00:00
| 0x0FBF h 4031 | char | EEPROM_BED_CORRECTION_LEFT | 00 h ffh | 00 h 0 | Bed manual correction left | LCD menu | D3 Ax0fbf C1
| ^ | ^ | ^ | ^ | ^ | At this moment limited to + - 100u m | G80 Lxxx | ^
| 0x0FBE h 4030 | char | EEPROM_BED_CORRECTION_RIGHT | 00 h ffh | 00 h 0 | Bed manual correction right | LCD menu | D3 Ax0fbe C1
| ^ | ^ | ^ | ^ | ^ | At this moment limited to + - 100u m | G80 Rxxx | ^
| 0x0FBD h 4029 | char | EEPROM_BED_CORRECTION_FRONT | 00 h ffh | 00 h 0 | Bed manual correction front | LCD menu | D3 Ax0fbd C1
| ^ | ^ | ^ | ^ | ^ | At this moment limited to + - 100u m | G80 Fxxx | ^
| 0x0FBC h 4028 | char | EEPROM_BED_CORRECTION_BACK | 00 h ffh | 00 h 0 | Bed manual correction back | LCD menu | D3 Ax0fbc C1
| ^ | ^ | ^ | ^ | ^ | At this moment limited to + - 100u m | G80 Bxxx | ^
2020-03-23 13:13:24 +00:00
| 0x0FBB h 4027 | bool | EEPROM_TOSHIBA_FLASH_AIR_COMPATIBLITY | 00 h 0 | ffh 255 | Toshiba Air : __off__ | LCD menu | D3 Ax0fbb C1
| ^ | ^ | ^ | 01 h 1 | ^ | Toshiba Air : __on__ | ^ | ^
2020-03-20 11:36:26 +00:00
| 0x0FBA h 4026 | uchar | EEPROM_PRINT_FLAG | ? ? ? | ? ? ? | _unsued_ | ? ? ? | D3 Ax0fba C1
| 0x0FB0 h 4016 | int16 | EEPROM_PROBE_TEMP_SHIFT | ? ? ? | ? ? ? | ? ? ? | ? ? ? | D3 Ax0fb0 C10
2020-03-22 14:18:45 +00:00
| 0x0FAF h 4015 | bool | EEPROM_TEMP_CAL_ACTIVE | 00 h 0 | 00 h 0 | PINDA Temp cal . : __inactive__ | LCD menu | D3 Ax0faf C1
| ^ | ^ | ^ | ffh 255 | ^ | PINDA Temp cal . : __active__ | ^ | ^
2022-02-15 11:23:48 +00:00
| 0x0FA7 h 4007 | ? ? ? | _EEPROM_FREE_NR6_ | ? ? ? | | _Free EEPROM space_ | ? ? ? | D3 Ax0fae C8
2020-03-23 11:02:57 +00:00
| ^ | ^ | ^ | ^ | 00 00 00 00 h | ^ | ^ | ^
2020-03-22 14:18:45 +00:00
| 0x0FA6 h 4006 | uint8 | EEPROM_CALIBRATION_STATUS_PINDA | 00 h 0 | ffh 255 | PINDA Temp : __not calibrated__ | ? ? ? | D3 Ax0fa6 C1
| ^ | ^ | ^ | 01 h 1 | ^ | PINDA Temp : __calibrated__ | ^ | ^
| 0x0FA5 h 4005 | uint8 | EEPROM_UVLO | 00 h 0 | ffh 255 | Power Panic flag : __inactive__ | ? ? ? | D3 Ax0fa5 C1
| ^ | ^ | ^ | 01 h 1 | ^ | Power Panic flag : __active__ | ^ | ^
| ^ | ^ | ^ | 02 h 2 | ^ | Power Panic flag : __ ? ? ? __ | ^ | ^
2020-03-20 11:36:26 +00:00
| 0x0F9D h 3997 | float | EEPROM_UVLO_CURRENT_POSITION | ? ? ? | ffh 255 | Power Panic position | ? ? ? | D3 Ax0f9d C8
| 0x0F95 h 3989 | char | EEPROM_FILENAME | ? ? ? | ffh 255 | Power Panic Filename | ? ? ? | D3 Ax0f95 C8
2020-12-14 09:37:34 +00:00
| 0x0F91 h 3985 | uint32 | EEPROM_FILE_POSITION | ? ? ? | ff ff ff ffh | Power Panic File Position | ? ? ? | D3 Ax0f91 C4
2020-03-20 11:36:26 +00:00
| 0x0F8D h 3981 | float | EEPROM_UVLO_CURRENT_POSITION_Z | ? ? ? | ff ff ff ffh | Power Panic Z Position | ^ | D3 Ax0f8d C4
2020-03-22 14:18:45 +00:00
| 0x0F8C h 3980 | ? ? ? | EEPROM_UVLO_UNUSED_001 | ? ? ? | ffh 255 | Power Panic _unused_ | ^ | D3 Ax0f8c C1
2020-03-20 11:36:26 +00:00
| 0x0F8B h 3979 | uint8 | EEPROM_UVLO_TARGET_BED | ? ? ? | ffh 255 | Power Panic Bed temperature | ^ | D3 Ax0f8b C1
| 0x0F89 h 3977 | uint16 | EEPROM_UVLO_FEEDRATE | ? ? ? | ff ffh 65535 | Power Panic Feedrate | ^ | D3 Ax0f89 C2
| 0x0F88 h 3976 | uint8 | EEPROM_UVLO_FAN_SPEED | ? ? ? | ffh 255 | Power Panic Fan speed | ^ | D3 Ax0f88 C1
2020-03-23 13:13:24 +00:00
| 0x0F87 h 3975 | uint8 | EEPROM_FAN_CHECK_ENABLED | 00 h 0 | ? ? ? | Fan Check __disabled__ | LCD menu | D3 Ax0f87 C1
| ^ | ^ | ^ | 01 h 1 | ffh 255 | Fan Check __enabled__ | ^ | ^
2020-03-20 11:36:26 +00:00
| 0x0F75 h 3957 | uint16 | EEPROM_UVLO_MESH_BED_LEVELING | ? ? ? | ff ffh 65535 | Power Panic Mesh Bed Leveling | ? ? ? | D3 Ax0f75 C18
| 0x0F73 h 3955 | uint16 | EEPROM_UVLO_Z_MICROSTEPS | ? ? ? | ff ffh 65535 | Power Panic Z microsteps | ? ? ? | D3 Ax0f73 C2
| 0x0F72 h 3954 | uint8 | EEPROM_UVLO_E_ABS | ? ? ? | ffh 255 | Power Panic ? ? ? position | ? ? ? | D3 Ax0f72 C1
| 0x0F6E h 3950 | foat | EEPROM_UVLO_CURRENT_POSITION_E | ? ? ? | ff ff ff ffh | Power Panic E position | ? ? ? | D3 Ax0f6e C4
2020-03-23 10:40:07 +00:00
| 0x0F6D h 3949 | ? ? ? | _EEPROM_FREE_NR2_ | ? ? ? | ffh 255 | _Free EEPROM space_ | _free space_ | D3 Ax0f6d C1
| 0x0F6C h 3948 | ? ? ? | _EEPROM_FREE_NR3_ | ? ? ? | ffh 255 | _Free EEPROM space_ | _free space_ | D3 Ax0f6c C1
| 0x0F6B h 3947 | ? ? ? | _EEPROM_FREE_NR4_ | ? ? ? | ffh 255 | _Free EEPROM space_ | _free space_ | D3 Ax0f6b C1
| 0x0F6A h 3946 | ? ? ? | _EEPROM_FREE_NR5_ | ? ? ? | ffh 255 | _Free EEPROM space_ | _free space_ | D3 Ax0f6a C1
| 0x0F69 h 3945 | uint8 | EEPROM_CRASH_DET | ffh 255 | ffh 255 | Crash detection : __enabled__ | LCD menu | D3 Ax0f69 C1
2020-03-22 14:18:45 +00:00
| ^ | ^ | ^ | 00 h 0 | ^ | Crash detection : __disabled__ | LCD menu | ^
2020-03-23 15:54:35 +00:00
| 0x0F68 h 3944 | uint8 | EEPROM_CRASH_COUNT_Y | 00 h - ffh 0 - 255 | ffh 255 __S / P__ | Crashes detected on y axis | ? ? ? | D3 Ax0f68 C1
| 0x0F67 h 3943 | uint8 | EEPROM_FSENSOR | 01 h 1 | ffh 255 __P__ | Filament sensor : __enabled__ | LCD menu | D3 Ax0f67 C1
2020-03-22 14:18:45 +00:00
| ^ | ^ | ^ | 00 h 0 | ^ | Filament sensor : __disabled__ | LCD menu | ^
2020-03-23 15:54:35 +00:00
| 0x0F65 h 3942 | uint8 | EEPROM_CRASH_COUNT_X | 00 h - ffh 0 - 255 | ffh 255 __S / P__ | Crashes detected on x axis | ? ? ? | D3 Ax0f66 C1
| 0x0F65 h 3941 | uint8 | EEPROM_FERROR_COUNT | 00 h - ffh 0 - 255 | ffh 255 __S / P__ | Filament sensor error counter | ? ? ? | D3 Ax0f65 C1
| 0x0F64 h 3940 | uint8 | EEPROM_POWER_COUNT | 00 h - ffh 0 - 255 | ffh 255 __S / P__ | Power failure counter | ? ? ? | D3 Ax0f64 C1
2020-03-20 11:36:26 +00:00
| 0x0F60 h 3936 | float | EEPROM_XYZ_CAL_SKEW | ? ? ? | ff ff ff ffh | XYZ skew value | ? ? ? | D3 Ax0f60 C4
2020-03-23 15:54:35 +00:00
| 0x0F5F h 3935 | uint8 | EEPROM_WIZARD_ACTIVE | 01 h 1 | 01 h 1 __P__ | Wizard __active__ | ? ? ? | D3 Ax0f5f C1
| ^ | ^ | ^ | 00 h 0 | ^ | Wizard __inactive__ | ^ | ^
2021-02-28 17:18:06 +00:00
| ^ | ^ | ^ | 02 h 2 | 02 h 2 __M__ | Wizard active - Z cal after shipping / service prep | ^ | ^
2020-03-20 11:36:26 +00:00
| 0x0F5D h 3933 | uint16 | EEPROM_BELTSTATUS_X | ? ? ? | ff ffh | X Beltstatus | ? ? ? | D3 Ax0f5d C2
| 0x0F5B h 3931 | uint16 | EEPROM_BELTSTATUS_Y | ? ? ? | ff ffh | Y Beltstatus | ? ? ? | D3 Ax0f5b C2
| 0x0F5A h 3930 | uint8 | EEPROM_DIR_DEPTH | 00 h - ffh 0 - 255 | ffh 255 | Directory depth | ? ? ? | D3 Ax0f5a C1
| 0x0F0A h 3850 | uint8 | EEPROM_DIRS | ? ? ? | ffh 255 | Directories ? ? ? | ? ? ? | D3 Ax0f0a C80
2020-03-22 14:18:45 +00:00
| 0x0F09 h 3849 | uint8 | EEPROM_SD_SORT | 00 h 0 | ffh 255 | SD card sort by : __time__ | LCD menu | D3 Ax0f09 C1
| ^ | ^ | ^ | 01 h 1 | ^ | SD card sort by : __alphabet__ | LCD menu | ^
| ^ | ^ | ^ | 02 h 1 | ^ | SD card : __not sorted__ | LCD menu | ^
| 0x0F08 h 3848 | uint8 | EEPROM_SECOND_SERIAL_ACTIVE | 00 h 0 | ffh 255 | RPi Port : __disabled__ | LCD menu | D3 Ax0f08 C1
| ^ | ^ | ^ | 01 h 1 | ^ | RPi Port : __enabled__ | LCD menu | ^
2020-03-23 15:54:35 +00:00
| 0x0F07 h 3847 | uint8 | EEPROM_FSENS_AUTOLOAD_ENABLED | 01 h 1 | ffh 255 __P__ | Filament autoload : __enabled__ | LCD menu | D3 Ax0f07 C1
2020-03-22 14:18:45 +00:00
| ^ | ^ | ^ | 00 h 0 | ^ | Filament autoload : __disabled__ | LCD menu | ^
2020-03-23 15:54:35 +00:00
| 0x0F05 h 3845 | uint16 | EEPROM_CRASH_COUNT_X_TOT | 0000 - fffe | ff ffh __S / P__ | Total crashes on x axis | ? ? ? | D3 Ax0f05 C2
| 0x0F03 h 3843 | uint16 | EEPROM_CRASH_COUNT_Y_TOT | 0000 - fffe | ff ffh __S / P__ | Total crashes on y axis | ? ? ? | D3 Ax0f03 C2
| 0x0F01 h 3841 | uint16 | EEPROM_FERROR_COUNT_TOT | 0000 - fffe | ff ffh __S / P__ | Total filament sensor errors | ? ? ? | D3 Ax0f01 C2
| 0x0EFF h 3839 | uint16 | EEPROM_POWER_COUNT_TOT | 0000 - fffe | ff ffh __S / P__ | Total power failures | ? ? ? | D3 Ax0eff C2
2020-03-22 13:08:21 +00:00
| 0x0EFE h 3838 | uint8 | EEPROM_TMC2130_HOME_X_ORIGIN | ? ? ? | ffh 255 | ? ? ? | ? ? ? | D3 Ax0efe C1
2020-12-14 09:37:34 +00:00
| 0x0EFD h 3837 | uint8 | EEPROM MC2130_HOME_X_BSTEPS | ? ? ? | ffh 255 | ? ? ? | ? ? ? | D3 Ax0efd C1
2020-03-22 13:08:21 +00:00
| 0x0EFC h 3836 | uint8 | EEPROM_TMC2130_HOME_X_FSTEPS | ? ? ? | ffh 255 | ? ? ? | ? ? ? | D3 Ax0efc C1
| 0x0EFB h 3835 | uint8 | EEPROM_TMC2130_HOME_Y_ORIGIN | ? ? ? | ffh 255 | ? ? ? | ? ? ? | D3 Ax0efb C1
| 0x0EFA h 3834 | uint8 | EEPROM_TMC2130_HOME_Y_BSTEPS | ? ? ? | ffh 255 | ? ? ? | ? ? ? | D3 Ax0efa C1
| 0x0EF9 h 3833 | uint8 | EEPROM_TMC2130_HOME_Y_FSTEPS | ? ? ? | ffh 255 | ? ? ? | ? ? ? | D3 Ax0ef9 C1
| 0x0EF8 h 3832 | uint8 | EEPROM_TMC2130_HOME_ENABLED | ? ? ? | ffh 255 | ? ? ? | ? ? ? | D3 Ax0ef8 C1
| 0x0EF7 h 3831 | uint8 | EEPROM_TMC2130_WAVE_X_FAC | ? ? ? | ffh 255 | ? ? ? | ? ? ? | D3 Ax0ef7 C1
| 0x0EF6 h 3830 | uint8 | EEPROM_TMC2130_WAVE_Y_FAC | ? ? ? | ffh 255 | ? ? ? | ? ? ? | D3 Ax0ef6 C1
| 0x0EF5 h 3829 | uint8 | EEPROM_TMC2130_WAVE_Z_FAC | ? ? ? | ffh 255 | ? ? ? | ? ? ? | D3 Ax0ef5 C1
| 0x0EF4 h 3828 | uint8 | EEPROM_TMC2130_WAVE_E_FAC | ? ? ? | ffh 255 | ? ? ? | ? ? ? | D3 Ax0ef4 C1
| 0x0EF3 h 3827 | uint8 | EEPROM_TMC2130_X_MRES | ? ? ? | ffh 255 | ? ? ? | ? ? ? | D3 Ax0ef3 C1
| 0x0EF2 h 3826 | uint8 | EEPROM_TMC2130_Y_MRES | ? ? ? | ffh 255 | ? ? ? | ? ? ? | D3 Ax0ef2 C1
| 0x0EF1 h 3825 | uint8 | EEPROM_TMC2130_Z_MRES | ? ? ? | ffh 255 | ? ? ? | ? ? ? | D3 Ax0ef1 C1
| 0x0EF0 h 3824 | uint8 | EEPROM_TMC2130_E_MRES | ? ? ? | ffh 255 | ? ? ? | ? ? ? | D3 Ax0ef0 C1
| 0x0EEE 3822 | uint16 | EEPROM_PRINTER_TYPE | ? ? ? | ff ffh 65535 | Printer Type | ? ? ? | D3 Ax0eee C2
2020-03-23 10:40:07 +00:00
| ^ | ^ | ^ | 64 00 h 100 | ^ | PRINTER_MK1 | ? ? ? | ^
| ^ | ^ | ^ | c8 00 h 200 | ^ | PRINTER_MK2 | ? ? ? | ^
| ^ | ^ | ^ | c9 00 h 201 | ^ | PRINTER_MK2 with MMU1 | ? ? ? | ^
| ^ | ^ | ^ | ca 00 h 202 | ^ | PRINTER_MK2S | ? ? ? | ^
| ^ | ^ | ^ | cb 00 h 203 | ^ | PRINTER_MK2S with MMU1 | ? ? ? | ^
| ^ | ^ | ^ | fa 00 h 250 | ^ | PRINTER_MK2 .5 | ? ? ? | ^
| ^ | ^ | ^ | 1 a 4f h 20250 | ^ | PRINTER_MK2 .5 with MMU2 | ? ? ? | ^
| ^ | ^ | ^ | fc 00 h 252 | ^ | PRINTER_MK2 .5 S | ? ? ? | ^
2020-03-30 08:36:13 +00:00
| ^ | ^ | ^ | 1 c 4f h 20252 | ^ | PRINTER_MK2 .5 S with MMU2S | ? ? ? | ^
| ^ | ^ | ^ | 2 c 01 h 300 | ^ | PRINTER_MK3 | ? ? ? | ^
2020-03-23 10:40:07 +00:00
| ^ | ^ | ^ | 4 c 4f h 20300 | ^ | PRINTER_MK3 with MMU2 | ? ? ? | ^
2020-03-30 08:36:13 +00:00
| ^ | ^ | ^ | 2 e 01 h 302 | ^ | PRINTER_MK3S | ? ? ? | ^
2020-03-23 10:40:07 +00:00
| ^ | ^ | ^ | 4 e 4f h 20302 | ^ | PRINTER_MK3S with MMU2S | ? ? ? | ^
2020-03-22 13:08:21 +00:00
| 0x0EEC 3820 | uint16 | EEPROM_BOARD_TYPE | ? ? ? | ff ffh 65535 | Board Type | ? ? ? | D3 Ax0eec C2
2020-03-23 10:40:07 +00:00
| ^ | ^ | ^ | c8 00 h 200 | ^ | BOARD_RAMBO_MINI_1_0 | ? ? ? | ^
| ^ | ^ | ^ | cb 00 h 203 | ^ | BOARD_RAMBO_MINI_1_3 | ? ? ? | ^
| ^ | ^ | ^ | 36 01 h 310 | ^ | BOARD_EINSY_1_0a | ? ? ? | ^
2020-03-22 13:08:21 +00:00
| 0x0EE8 3816 | float | EEPROM_EXTRUDER_MULTIPLIER_0 | ? ? ? | ff ff ff ffh | Power panic Extruder 0 multiplier | ? ? ? | D3 Ax0ee8 C4
| 0x0EE4 3812 | float | EEPROM_EXTRUDER_MULTIPLIER_1 | ? ? ? | ff ff ff ffh | Power panic Extruder 1 multiplier | ? ? ? | D3 Ax0ee4 C4
| 0x0EE0 3808 | float | EEPROM_EXTRUDER_MULTIPLIER_2 | ? ? ? | ff ff ff ffh | Power panic Extruder 2 multiplier | ? ? ? | D3 Ax0ee0 C4
| 0x0EDE 3806 | uint16 | EEPROM_EXTRUDEMULTIPLY | ? ? ? | ff ffh 65535 | Power panic Extruder multiplier | ? ? ? | D3 Ax0ede C2
| 0x0EDA 3802 | float | EEPROM_UVLO_TINY_CURRENT_POSITION_Z | ? ? ? | ff ff ff ffh | Power panic Z position | ? ? ? | D3 Ax0eda C4
2020-03-23 14:47:59 +00:00
| 0x0ED8 3800 | uint16 | EEPROM_UVLO_TARGET_HOTEND | ? ? ? | ff ffh 65535 | Power panic target Hotend temperature | ? ? ? | D3 Ax0ed8 C2
2020-03-22 14:18:45 +00:00
| 0x0ED7 3799 | uint8 | EEPROM_SOUND_MODE | 00 h 0 | ffh 255 | Sound mode : __loud__ | ? ? ? | D3 Ax0ed7 C1
| ^ | ^ | ^ | 01 h 1 | ^ | Sound mode : __once__ | ^ | ^
| ^ | ^ | ^ | 02 h 1 | ^ | Sound mode : __silent__ | ^ | ^
| ^ | ^ | ^ | 03 h 1 | ^ | Sound mode : __assist__ | ^ | ^
| 0x0ED6 3798 | bool | EEPROM_AUTO_DEPLETE | 01 h 1 | ffh 255 | MMU2 / s autodeplete : __on__ | ? ? ? | D3 Ax0ed6 C1
| ^ | ^ | ^ | 00 h 0 | ^ | MMU2 / s autodeplete : __off__ | ^ | ^
2020-03-22 13:08:21 +00:00
| 0x0ED5 3797 | bool | EEPROM_FSENS_OQ_MEASS_ENABLED | ? ? ? | ffh 255 | PAT1925 ? ? ? | ? ? ? | D3 Ax0ed5 C1
| ^ | ^ | ^ | ? ? ? | ^ | PAT1925 ? ? ? | ^ | ^
2020-03-23 15:54:35 +00:00
| 0x0ED3 3795 | uint16 | EEPROM_MMU_FAIL_TOT | ? ? ? | ff ffh 65535 __S / P__ | MMU2 / s total failures | ? ? ? | D3 Ax0ed3 C2
| 0x0ED2 3794 | uint8 | EEPROM_MMU_FAIL | ? ? ? | ffh 255 __S / P__ | MMU2 / s fails during print | ? ? ? | D3 Ax0ed2 C1
| 0x0ED0 3792 | uint16 | EEPROM_MMU_LOAD_FAIL_TOT | ? ? ? | ff ffh 65535 __S / P__ | MMU2 / s total load failures | ? ? ? | D3 Ax0ed0 C2
| 0x0ECF 3791 | uint8 | EEPROM_MMU_LOAD_FAIL | ? ? ? | ffh 255 __S / P__ | MMU2 / s load failures during print | ? ? ? | D3 Ax0ecf C1
2020-03-22 14:18:45 +00:00
| 0x0ECE 3790 | uint8 | EEPROM_MMU_CUTTER_ENABLED | 00 h 0 | ffh 255 | MMU2 / s cutter : __disabled__ | LCD menu | D3 Ax0ece C1
| ^ | ^ | ^ | 01 h 1 | ^ | MMU2 / s cutter : __enabled__ | ^ | ^
| ^ | ^ | ^ | 02 h 2 | ^ | MMU2 / s cutter : __always__ | ^ | ^
2020-03-22 13:08:21 +00:00
| 0x0DAE 3502 | uint16 | EEPROM_UVLO_MESH_BED_LEVELING_FULL | ? ? ? | ff ffh 65535 | Power panic Mesh bed leveling points | ? ? ? | D3 Ax0dae C288
| 0x0DAD 3501 | uint8 | EEPROM_MBL_TYPE | ? ? ? | ffh 255 | Mesh bed leveling precision _unused atm_ | ? ? ? | D3 Ax0dad C1
2020-03-22 14:18:45 +00:00
| 0x0DAC 3500 | bool | EEPROM_MBL_MAGNET_ELIMINATION | 01 h 1 | ffh 255 | Mesh bed leveling does : __ignores__ magnets | LCD menu | D3 Ax0dac C1
| ^ | ^ | ^ | 00 h 0 | ^ | Mesh bed leveling does : __NOT ignores__ magnets | ^ | ^
| 0x0DAB 3499 | uint8 | EEPROM_MBL_POINTS_NR | 03 h 3 | ffh 255 | Mesh bed leveling points : __3x3__ | LCD menu | D3 Ax0dab C1
| ^ | ^ | ^ | 07 h 7 | ^ | Mesh bed leveling points : __7x7__ | ^ | ^
| 0x0DAA 3498 | uint8 | EEPROM_MBL_PROBE_NR | 03 h 3 | ffh 255 | MBL times measurements for each point : __3__ | LCD menu | D3 Ax0daa C1
| ^ | ^ | ^ | 05 h 5 | ^ | MBL times measurements for each point : __5__ | ^ | ^
2020-03-23 10:40:07 +00:00
| ^ | ^ | ^ | 01 h 1 | ^ | MBL times measurements for each point : __1__ | ^ | ^
2020-03-22 14:18:45 +00:00
| 0x0DA9 3497 | uint8 | EEPROM_MMU_STEALTH | 01 h 1 | ffh 255 | MMU2 / s Silent mode : __on__ | ? ? ? | D3 Ax0da9 C1
| ^ | ^ | ^ | 00 h 0 | ^ | MMU2 / s Silent mode : __off__ | ^ | ^
| 0x0DA8 3496 | uint8 | EEPROM_CHECK_MODE | 01 h 1 | ffh 255 | Check mode for nozzle is : __warn__ | LCD menu | D3 Ax0da8 C1
| ^ | ^ | ^ | 02 h 0 | ^ | Check mode for nozzle is : __strict__ | ^ | ^
| ^ | ^ | ^ | 00 h 0 | ^ | Check mode for nozzle is : __none__ | ^ | ^
| 0x0DA7 3495 | uint8 | EEPROM_NOZZLE_DIAMETER | 28 h 40 | ffh 255 | Nozzle diameter is : __40 or 0.40 mm__ | LCD menu | D3 Ax0da7 C1
| ^ | ^ | ^ | 3 ch 60 | ^ | Nozzle diameter is : __60 or 0.60 mm__ | ^ | ^
2021-01-08 12:52:39 +00:00
| ^ | ^ | ^ | 3 ch 80 | ^ | Nozzle diameter is : __80 or 0.80 mm__ | ^ | ^
2020-03-22 14:18:45 +00:00
| ^ | ^ | ^ | 19 h 25 | ^ | Nozzle diameter is : __25 or 0.25 mm__ | ^ | ^
| 0x0DA5 3493 | uint16 | EEPROM_NOZZLE_DIAMETER_uM | 9001 h | ff ffh 65535 | Nozzle diameter is : __400um__ | LCD menu | D3 Ax0da5 C2
| ^ | ^ | ^ | 5802 h | ^ | Nozzle diameter is : __600um__ | ^ | ^
2021-01-08 12:52:39 +00:00
| ^ | ^ | ^ | 2003 h | ^ | Nozzle diameter is : __800um__ | ^ | ^
2020-03-22 14:18:45 +00:00
| ^ | ^ | ^ | fa00h | ^ | Nozzle diameter is : __250um__ | ^ | ^
| 0x0DA4 3492 | uint8 | EEPROM_CHECK_MODEL | 01 h 1 | ffh 255 | Check mode for printer model is : __warn__ | LCD menu | D3 Ax0da4 C1
| ^ | ^ | ^ | 02 h 0 | ^ | Check mode for printer model is : __strict__ | ^ | ^
| ^ | ^ | ^ | 00 h 0 | ^ | Check mode for printer model is : __none__ | ^ | ^
| 0x0DA3 3491 | uint8 | EEPROM_CHECK_VERSION | 01 h 1 | ffh 255 | Check mode for firmware is : __warn__ | LCD menu | D3 Ax0da3 C1
| ^ | ^ | ^ | 02 h 0 | ^ | Check mode for firmware is : __strict__ | ^ | ^
| ^ | ^ | ^ | 00 h 0 | ^ | Check mode for firmware is : __none__ | ^ | ^
| 0x0DA2 3490 | uint8 | EEPROM_CHECK_GCODE | 01 h 1 | ffh 255 | Check mode for gcode is : __warn__ _unused atm_ | LCD menu | D3 Ax0da2 C1
| ^ | ^ | ^ | 02 h 0 | ^ | Check mode for gcode is : __strict__ _unused atm_ | ^ | ^
| ^ | ^ | ^ | 00 h 0 | ^ | Check mode for gcode is : __none__ _unused atm_ | ^ | ^
2020-03-22 13:08:21 +00:00
| 0x0D49 3401 | uint16 | EEPROM_SHEETS_BASE | ? ? ? | ffh 255 | ? ? ? | LCD menu | D3 Ax0d49 C89
| 0x0D49 3401 | char | _1st Sheet block_ | 536 d6f6f746831 | ffffffffffffff | 1 st sheet - Name : _Smooth1_ | ^ | D3 Ax0d49 C7
| 0x0D50 3408 | uint16 | ^ | 00 00 h 0 | ff ffh 65535 | 1 st sheet - Z offset | ^ | D3 Ax0d50 C2
| 0x0D52 3410 | uint8 | ^ | 00 h 0 | ffh 255 | 1 st sheet - bed temp | ^ | D3 Ax0d52 C1
| 0x0D53 3411 | uint8 | ^ | 00 h 0 | ffh 255 | 1 st sheet - PINDA temp | ^ | D3 Ax0d53 C1
| 0x0D54 3412 | char | _2nd Sheet block_ | 536 d6f6f746832 | ffffffffffffff | 2 nd sheet - Name : _Smooth2_ | ^ | D3 Ax0d54 C7
| 0x0D5B 3419 | uint16 | ^ | 00 00 h 0 | ff ffh 65535 | 2 nd sheet - Z offset | ^ | D3 Ax0d5b C2
| 0x0D5D 3421 | uint8 | ^ | 00 h 0 | ffh 255 | 2 nd sheet - bed temp | ^ | D3 Ax0d5d C1
| 0x0D5E 3422 | uint8 | ^ | 00 h 0 | ffh 255 | 2 nd sheet - PINDA temp | ^ | D3 Ax0d5e C1
| 0x0D5F 3423 | char | _3rd Sheet block_ | 54657874757231 | ffffffffffffff | 3 rd sheet - Name : _Textur1_ | ^ | D3 Ax0d5f C7
| 0x0D66 3430 | uint16 | ^ | 00 00 h 0 | ff ffh 65535 | 3 rd sheet - Z offset | ^ | D3 Ax0d66 C2
| 0x0D68 3432 | uint8 | ^ | 00 h 0 | ffh 255 | 3 rd sheet - bed temp | ^ | D3 Ax0d68 C1
| 0x0D69 3433 | uint8 | ^ | 00 h 0 | ffh 255 | 3 rd sheet - PINDA temp | ^ | D3 Ax0d69 C1
| 0x0D6A 3434 | char | _4th Sheet block_ | 54657874757232 | ffffffffffffff | 4 th sheet - Name : _Textur2_ | ^ | D3 Ax0d6a C7
| 0x0D71 3441 | uint16 | ^ | 00 00 h 0 | ff ffh 65535 | 4 th sheet - Z offset | ^ | D3 Ax0d71 C2
| 0x0D73 3443 | uint8 | ^ | 00 h 0 | ffh 255 | 4 th sheet - bed temp | ^ | D3 Ax0d73 C1
| 0x0D74 3444 | uint8 | ^ | 00 h 0 | ffh 255 | 4 th sheet - PINDA temp | ^ | D3 Ax0d74 C1
2021-03-07 14:44:33 +00:00
| 0x0D75 3445 | char | _5th Sheet block_ | 536174696e2031 | ffffffffffffff | 5 th sheet - Name : _Satin 1 _ | ^ | D3 Ax0d75 C7
2020-03-22 13:08:21 +00:00
| 0x0D7C 3452 | uint16 | ^ | 00 00 h 0 | ff ffh 65535 | 5 th sheet - Z offset | ^ | D3 Ax0d7c C2
| 0x0D7E 3454 | uint8 | ^ | 00 h 0 | ffh 255 | 5 th sheet - bed temp | ^ | D3 Ax0d7e C1
| 0x0D7F 3455 | uint8 | ^ | 00 h 0 | ffh 255 | 5 th sheet - PINDA temp | ^ | D3 Ax0d7f C1
2021-03-07 14:44:33 +00:00
| 0x0D80 3456 | char | _6th Sheet block_ | 536174696e2032 | ffffffffffffff | 6 th sheet - Name : _Satin 2 _ | ^ | D3 Ax0d80 C7
2020-03-22 13:08:21 +00:00
| 0x0D87 3463 | uint16 | ^ | 00 00 h 0 | ff ffh 65535 | 6 th sheet - Z offset | ^ | D3 Ax0d87 C2
| 0x0D89 3465 | uint8 | ^ | 00 h 0 | ffh 255 | 6 th sheet - bed temp | ^ | D3 Ax0d89 C1
| 0x0D8A 3466 | uint8 | ^ | 00 h 0 | ffh 255 | 6 th sheet - PINDA temp | ^ | D3 Ax0d8a C1
2021-03-07 17:14:03 +00:00
| 0x0D8B 3467 | char | _7th Sheet block_ | 437573746f 6 d31 | ffffffffffffff | 7 th sheet - Name : _Custom1_ | ^ | D3 Ax0d8b C7
2020-03-22 13:08:21 +00:00
| 0x0D92 3474 | uint16 | ^ | 00 00 h 0 | ff ffh 65535 | 7 th sheet - Z offset | ^ | D3 Ax0d92 C2
| 0x0D94 3476 | uint8 | ^ | 00 h 0 | ffh 255 | 7 th sheet - bed temp | ^ | D3 Ax0d94 C1
| 0x0D95 3477 | uint8 | ^ | 00 h 0 | ffh 255 | 7 th sheet - PINDA temp | ^ | D3 Ax0d95 C1
2021-03-07 17:14:03 +00:00
| 0x0D96 3478 | char | _8th Sheet block_ | 437573746f 6 d32 | ffffffffffffff | 8 th sheet - Name : _Custom2_ | ^ | D3 Ax0d96 C7
2020-03-22 13:08:21 +00:00
| 0x0D9D 3485 | uint16 | ^ | 00 00 h 0 | ff ffh 65535 | 8 th sheet - Z offset | ^ | D3 Ax0d9d C2
| 0x0D9F 3487 | uint8 | ^ | 00 h 0 | ffh 255 | 8 th sheet - bed temp | ^ | D3 Ax0d9f C1
| 0x0DA0 3488 | uint8 | ^ | 00 h 0 | ffh 255 | 8 th sheet - PINDA temp | ^ | D3 Ax0da0 C1
| 0x0DA1 3489 | uint8 | ? ? ? | 00 h 0 | ffh 255 | ? ? ? | ? ? ? | D3 Ax0da1 C1
2020-06-03 14:14:56 +00:00
| 0x0D48 3400 | uint8 | EEPROM_FSENSOR_PCB | ffh 255 | ffh 255 | Filament Sensor type IR unknown | LCD Support | D3 Ax0d48 C1
| ^ | ^ | ^ | 00 h 0 | ^ | Filament Sensor type IR 0.3 or older | ^ | ^
| ^ | ^ | ^ | 01 h 1 | ^ | Filament Sensor type IR 0.4 or newer | ^ | ^
2020-03-22 14:18:45 +00:00
| 0x0D47 3399 | uint8 | EEPROM_FSENSOR_ACTION_NA | 00 h 0 | ffh 255 | Filament Sensor action : __Continue__ | LCD menu | D3 Ax0d47 C1
| ^ | ^ | ^ | 01 h 1 | ^ | Filament Sensor action : __Pause__ | ^ | ^
2020-03-22 13:08:21 +00:00
| 0x0D37 3383 | float | EEPROM_UVLO_SAVED_TARGET | ? ? ? | ff ff ff ffh | Power panic saved target all - axis | ? ? ? | D3 Ax0d37 C16
| ^ | ^ | ^ | ? ? ? | ^ | Power panic saved target e - axis | ^ | D3 Ax0d43 C4
| ^ | ^ | ^ | ? ? ? | ^ | Power panic saved target z - axis | ^ | D3 Ax0d3f C4
| ^ | ^ | ^ | ? ? ? | ^ | Power panic saved target y - axis | ^ | D3 Ax0d3b C4
| ^ | ^ | ^ | ? ? ? | ^ | Power panic saved target x - axis | ^ | D3 Ax0d37 C4
| 0x0D35 3381 | uint16 | EEPROM_UVLO_FEEDMULTIPLY | ? ? ? | ff ffh 65355 | Power panic saved feed multiplier | ? ? ? | D3 Ax0d35 C2
2020-03-23 13:13:24 +00:00
| 0x0D34 3380 | uint8 | EEPROM_BACKLIGHT_LEVEL_HIGH | 00 h - ffh | 82 h 130 | LCD backlight bright : __128__ Dim value to 255 | LCD menu | D3 Ax0d34 C1
2020-03-22 14:18:45 +00:00
| 0x0D33 3379 | uint8 | EEPROM_BACKLIGHT_LEVEL_LOW | 00 h - ffh | 32 h 50 | LCD backlight dim : __50__ 0 to Bright value | LCD menu | D3 Ax0d33 C1
| 0x0D32 3378 | uint8 | EEPROM_BACKLIGHT_MODE | 02 h 2 | ffh 255 | LCD backlight mode : __Auto__ | LCD menu | D3 Ax0d32 C1
| ^ | ^ | ^ | 01 h 1 | ^ | LCD backlight mode : __Bright__ | ^ | ^
| ^ | ^ | ^ | 00 h 0 | ^ | LCD backlight mode : __Dim__ | ^ | ^
2020-03-30 14:16:07 +00:00
| 0x0D30 3376 | uint16 | EEPROM_BACKLIGHT_TIMEOUT | 01 00 - ff ff | 0 a 00 h 65535 | LCD backlight timeout : __10__ seconds | LCD menu | D3 Ax0d30 C2
2020-03-22 13:08:21 +00:00
| 0x0D2C 3372 | float | EEPROM_UVLO_LA_K | ? ? ? | ff ff ff ffh | Power panic saved Linear Advanced K value | ? ? ? | D3 Ax0d2c C4
2020-08-20 13:14:39 +00:00
| 0x0D2B 3371 | uint8 | EEPROM_ALTFAN_OVERRIDE | ffh 255 | ffh 255 | ALTFAN override unknown state | LCD menu | D3 Ax0d2b C1
| ^ | ^ | ^ | 00 h 0 | ^ | ALTFAN override deactivated | ^ | ^
| ^ | ^ | ^ | 01 h 1 | ^ | ALTFAN override activated | ^ | ^
| 0x0D2A 3370 | uint8 | EEPROM_EXPERIMENTAL_VISIBILITY | ffh 255 | ffh 255 | Experimental menu visibility unknown state | LCD menu | D3 Ax0d2a C1
| ^ | ^ | ^ | 00 h 0 | ^ | Experimental menu visibility hidden | ^ | ^
| ^ | ^ | ^ | 01 h 1 | ^ | Experimental menu visibility visible | ^ | ^
2020-12-07 14:32:19 +00:00
| 0x0D29 3369 | uint8 | EEPROM_PINDA_TEMP_COMPENSATION | ffh 255 | ffh 255 | PINDA temp compensation unknown state | LCD menu | D3 Ax0d29 C1
| ^ | ^ | ^ | 00 h 0 | ^ | PINDA has no temp compensation PINDA v1 / 2 | ^ | ^
| ^ | ^ | ^ | 01 h 1 | ^ | PINDA has temp compensation aka SuperPINDA | ^ | ^
2021-01-14 09:52:22 +00:00
| 0x0D15 3349 | char [ 20 ] | EEPROM_PRUSA_SN | SN [ 19 ] = = 0 | ffffffffffffffff . . . | PRUSA Serial number string | PRUSA SN | D3 Ax0d15 C20
2021-01-31 23:02:49 +00:00
| 0x0D11 3345 | float | EEPROM_UVLO_ACCELL | ? ? ? | ff ff ff ffh | Power panic saved normal acceleration | ? ? ? | D3 Ax0d11 C4
| 0x0D0D 3341 | float | EEPROM_UVLO_RETRACT_ACCELL | ? ? ? | ff ff ff ffh | Power panic saved retract acceleration | ? ? ? | D3 Ax0d0d C4
| 0x0D09 3337 | float | EEPROM_UVLO_TRAVEL_ACCELL | ? ? ? | ff ff ff ffh | Power panic saved travel acceleration | ? ? ? | D3 Ax0d09 C4
2021-04-01 17:37:07 +00:00
| 0x0D05 3333 | uint32_t | EEPROM_JOB_ID | ? ? ? | 00 00 00 00 h | Job ID used by host software | D3 only | D3 Ax0d05 C4
2021-05-22 14:09:55 +00:00
| 0x0D04 3332 | uint8_t | EEPROM_ECOOL_ENABLE | ffh 255 | ^ | Disable extruder motor scaling for non - farm print | LCD menu | D3 Ax0d04 C1
| ^ | ^ | ^ | 2 ah 42 | ^ | Enable extruder motor scaling for non - farm print | ^ | D3 Ax0d04 C1
2022-02-07 18:41:14 +00:00
| 0x0D03 3321 | uint8_t | EEPROM_FW_CRASH_FLAG | ffh 255 | ffh 255 | Last FW crash reason ( dump_crash_reason ) | D21 / D22 | D3 Ax0d03 C1
| ^ | ^ | ^ | 00 h 0 | ^ | manual | ^ | ^
| ^ | ^ | ^ | 01 h 1 | ^ | stack_error | ^ | ^
| ^ | ^ | ^ | 02 h 2 | ^ | watchdog | ^ | ^
| ^ | ^ | ^ | 03 h 3 | ^ | bad_isr | ^ | ^
| ^ | ^ | ^ | 04 h 4 | ^ | bad_pullup_temp_isr | ^ | ^
| ^ | ^ | ^ | 05 h 5 | ^ | bad_pullup_step_isr | ^ | ^
2020-03-22 13:08:21 +00:00
2020-03-23 14:47:59 +00:00
| Address begin | Bit / Type | Name | Valid values | Default / FactoryReset | Description | Gcode / Function | Debug code
2020-03-22 13:08:21 +00:00
| : - - : | : - - : | : - - : | : - - : | : - - : | : - - : | : - - : | : - - :
| 0x0012 18 | uint16 | EEPROM_FIRMWARE_VERSION_END | ? ? ? | ff ffh 65535 | ? ? ? | ? ? ? | D3 Ax0012 C2
| 0x0010 16 | uint16 | EEPROM_FIRMWARE_VERSION_FLAVOR | ? ? ? | ff ffh 65535 | ? ? ? | ? ? ? | D3 Ax0010 C2
| 0x000E 14 | uint16 | EEPROM_FIRMWARE_VERSION_REVISION | ? ? ? | ff ffh 65535 | Firmware version revision number DEV / ALPHA / BETA / RC | ? ? ? | D3 Ax000e C2
| 0x000C 12 | uint16 | EEPROM_FIRMWARE_VERSION_MINOR | ? ? ? | ff ffh 65535 | Firmware version minor number | ? ? ? | D3 Ax000c C2
| 0x000A 10 | uint16 | EEPROM_FIRMWARE_VERSION_MAJOR | ? ? ? | ff ffh 65535 | Firmware version major number | ? ? ? | D3 Ax000a C2
2020-03-23 06:23:36 +00:00
| 0x0000 0 | char | FW_PRUSA3D_MAGIC | ? ? ? | ffffffffffffffffffff | __ ` PRUSA3DFW ` __ | ? ? ? | D3 Ax0000 C10
2020-03-20 11:36:26 +00:00
*/
2020-03-22 13:08:21 +00:00
2019-07-03 15:21:11 +00:00
# define EEPROM_EMPTY_VALUE 0xFF
2019-10-01 14:57:37 +00:00
# define EEPROM_EMPTY_VALUE16 0xFFFF
2021-04-01 17:37:07 +00:00
# define EEPROM_EMPTY_VALUE32 0xFFFFFFFFl
2018-07-23 18:04:47 +00:00
// The total size of the EEPROM is
// 4096 for the Atmega2560
# define EEPROM_TOP 4096
# define EEPROM_SILENT 4095
# define EEPROM_LANG 4094
2019-08-29 16:26:24 +00:00
# define EEPROM_BABYSTEP_X 4092 //unused
# define EEPROM_BABYSTEP_Y 4090 //unused
# define EEPROM_BABYSTEP_Z 4088 //legacy, multiple values stored now in EEPROM_Sheets_base
2018-07-23 18:04:47 +00:00
# define EEPROM_CALIBRATION_STATUS 4087
# define EEPROM_BABYSTEP_Z0 4085
# define EEPROM_FILAMENTUSED 4081
// uint32_t
# define EEPROM_TOTALTIME 4077
# define EEPROM_BED_CALIBRATION_CENTER (EEPROM_TOTALTIME-2*4)
# define EEPROM_BED_CALIBRATION_VEC_X (EEPROM_BED_CALIBRATION_CENTER-2*4)
# define EEPROM_BED_CALIBRATION_VEC_Y (EEPROM_BED_CALIBRATION_VEC_X-2*4)
// Offsets of the Z heiths of the calibration points from the first point.
// The offsets are saved as 16bit signed int, scaled to tenths of microns.
# define EEPROM_BED_CALIBRATION_Z_JITTER (EEPROM_BED_CALIBRATION_VEC_Y-2*8)
# define EEPROM_FARM_MODE (EEPROM_BED_CALIBRATION_Z_JITTER-1)
2020-03-23 10:40:07 +00:00
# define EEPROM_FREE_NR1 (EEPROM_FARM_MODE-1)
# define EEPROM_FARM_NUMBER (EEPROM_FREE_NR1-2)
2018-07-23 18:04:47 +00:00
// Correction of the bed leveling, in micrometers.
// Maximum 50 micrometers allowed.
// Bed correction is valid if set to 1. If set to zero or 255, the successive 4 bytes are invalid.
# define EEPROM_BED_CORRECTION_VALID (EEPROM_FARM_NUMBER-1)
# define EEPROM_BED_CORRECTION_LEFT (EEPROM_BED_CORRECTION_VALID-1)
# define EEPROM_BED_CORRECTION_RIGHT (EEPROM_BED_CORRECTION_LEFT-1)
# define EEPROM_BED_CORRECTION_FRONT (EEPROM_BED_CORRECTION_RIGHT-1)
# define EEPROM_BED_CORRECTION_REAR (EEPROM_BED_CORRECTION_FRONT-1)
# define EEPROM_TOSHIBA_FLASH_AIR_COMPATIBLITY (EEPROM_BED_CORRECTION_REAR-1)
# define EEPROM_PRINT_FLAG (EEPROM_TOSHIBA_FLASH_AIR_COMPATIBLITY-1)
# define EEPROM_PROBE_TEMP_SHIFT (EEPROM_PRINT_FLAG - 2*5) //5 x int for storing pinda probe temp shift relative to 50 C; unit: motor steps
# define EEPROM_TEMP_CAL_ACTIVE (EEPROM_PROBE_TEMP_SHIFT - 1)
2022-02-15 11:23:48 +00:00
# define _EEPROM_FREE_NR6_ (EEPROM_TEMP_CAL_ACTIVE - 2*4) //4 x int (used to be for bowden lengths for SNMM)
# define EEPROM_CALIBRATION_STATUS_PINDA (_EEPROM_FREE_NR6_ - 1) //0 - not calibrated; 1 - calibrated
2018-07-23 18:04:47 +00:00
# define EEPROM_UVLO (EEPROM_CALIBRATION_STATUS_PINDA - 1) //1 - uvlo during print
# define EEPROM_UVLO_CURRENT_POSITION (EEPROM_UVLO-2*4) // 2 x float for current_position in X and Y axes
# define EEPROM_FILENAME (EEPROM_UVLO_CURRENT_POSITION - 8) //8chars to store filename without extension
# define EEPROM_FILE_POSITION (EEPROM_FILENAME - 4) //32 bit for uint32_t file position
# define EEPROM_UVLO_CURRENT_POSITION_Z (EEPROM_FILE_POSITION - 4) //float for current position in Z
2020-01-27 13:59:18 +00:00
# define EEPROM_UVLO_UNUSED_001 (EEPROM_UVLO_CURRENT_POSITION_Z - 1) // uint8_t (unused)
# define EEPROM_UVLO_TARGET_BED (EEPROM_UVLO_UNUSED_001 - 1)
2019-10-19 19:45:50 +00:00
# define EEPROM_UVLO_FEEDRATE (EEPROM_UVLO_TARGET_BED - 2) //uint16_t
2018-07-23 18:04:47 +00:00
# define EEPROM_UVLO_FAN_SPEED (EEPROM_UVLO_FEEDRATE - 1)
# define EEPROM_FAN_CHECK_ENABLED (EEPROM_UVLO_FAN_SPEED - 1)
# define EEPROM_UVLO_MESH_BED_LEVELING (EEPROM_FAN_CHECK_ENABLED - 9*2)
2020-01-26 16:35:50 +00:00
# define EEPROM_UVLO_Z_MICROSTEPS (EEPROM_UVLO_MESH_BED_LEVELING - 2) // uint16_t (could be removed)
2018-07-23 18:04:47 +00:00
# define EEPROM_UVLO_E_ABS (EEPROM_UVLO_Z_MICROSTEPS - 1)
# define EEPROM_UVLO_CURRENT_POSITION_E (EEPROM_UVLO_E_ABS - 4) //float for current position in E
2020-03-23 13:51:40 +00:00
# define EEPROM_FREE_NR2 (EEPROM_UVLO_CURRENT_POSITION_E - 1) // FREE EEPROM SPACE
# define EEPROM_FREE_NR3 (EEPROM_FREE_NR2 - 1) // FREE EEPROM SPACE
# define EEPROM_FREE_NR4 (EEPROM_FREE_NR3 - 1) // FREE EEPROM SPACE
# define EEPROM_FREE_NR5 (EEPROM_FREE_NR4 - 1) // FREE EEPROM SPACE
2018-07-23 18:04:47 +00:00
// Crash detection mode EEPROM setting
2020-03-23 10:40:07 +00:00
# define EEPROM_CRASH_DET (EEPROM_FREE_NR5 - 1) // uint8 (orig EEPROM_UVLO_MESH_BED_LEVELING-12)
2018-07-23 18:04:47 +00:00
// Crash detection counter Y (last print)
# define EEPROM_CRASH_COUNT_Y (EEPROM_CRASH_DET - 1) // uint8 (orig EEPROM_UVLO_MESH_BED_LEVELING-15)
// Filament sensor on/off EEPROM setting
# define EEPROM_FSENSOR (EEPROM_CRASH_COUNT_Y - 1) // uint8 (orig EEPROM_UVLO_MESH_BED_LEVELING-14)
// Crash detection counter X (last print)
# define EEPROM_CRASH_COUNT_X (EEPROM_FSENSOR - 1) // uint8 (orig EEPROM_UVLO_MESH_BED_LEVELING-15)
// Filament runout/error coutner (last print)
# define EEPROM_FERROR_COUNT (EEPROM_CRASH_COUNT_X - 1) // uint8 (orig EEPROM_UVLO_MESH_BED_LEVELING-16)
// Power loss errors (last print)
# define EEPROM_POWER_COUNT (EEPROM_FERROR_COUNT - 1) // uint8 (orig EEPROM_UVLO_MESH_BED_LEVELING-17)
# define EEPROM_XYZ_CAL_SKEW (EEPROM_POWER_COUNT - 4) // float for skew backup
2021-02-17 11:53:56 +00:00
# define EEPROM_WIZARD_ACTIVE (EEPROM_XYZ_CAL_SKEW - 1) // 0: wizard not active, 1: wizard active, 2: wizard active without yes/no = forced calibrate Z after shipping/service prep.
2018-07-23 18:04:47 +00:00
# define EEPROM_BELTSTATUS_X (EEPROM_WIZARD_ACTIVE - 2) // uint16
# define EEPROM_BELTSTATUS_Y (EEPROM_BELTSTATUS_X - 2) // uint16
# define EEPROM_DIR_DEPTH (EEPROM_BELTSTATUS_Y-1)
# define EEPROM_DIRS (EEPROM_DIR_DEPTH-80) //8 chars for each dir name, max 10 levels
# define EEPROM_SD_SORT (EEPROM_DIRS - 1) //0 -time, 1-alpha, 2-none
# define EEPROM_SECOND_SERIAL_ACTIVE (EEPROM_SD_SORT - 1)
# define EEPROM_FSENS_AUTOLOAD_ENABLED (EEPROM_SECOND_SERIAL_ACTIVE - 1)
// Crash detection counter X (total)
# define EEPROM_CRASH_COUNT_X_TOT (EEPROM_FSENS_AUTOLOAD_ENABLED - 2) // uint16
// Crash detection counter Y (total)
# define EEPROM_CRASH_COUNT_Y_TOT (EEPROM_CRASH_COUNT_X_TOT - 2) // uint16
// Filament runout/error coutner (total)
# define EEPROM_FERROR_COUNT_TOT (EEPROM_CRASH_COUNT_Y_TOT - 2) // uint16
// Power loss errors (total)
# define EEPROM_POWER_COUNT_TOT (EEPROM_FERROR_COUNT_TOT - 2) // uint16
////////////////////////////////////////
// TMC2130 Accurate sensorless homing
// X-axis home origin (stepper phase in microsteps, 0..63 for 16ustep resolution)
# define EEPROM_TMC2130_HOME_X_ORIGIN (EEPROM_POWER_COUNT_TOT - 1) // uint8
// X-axis home bsteps (number of microsteps backward)
# define EEPROM_TMC2130_HOME_X_BSTEPS (EEPROM_TMC2130_HOME_X_ORIGIN - 1) // uint8
// X-axis home fsteps (number of microsteps forward)
# define EEPROM_TMC2130_HOME_X_FSTEPS (EEPROM_TMC2130_HOME_X_BSTEPS - 1) // uint8
// Y-axis home origin (stepper phase in microsteps, 0..63 for 16ustep resolution)
# define EEPROM_TMC2130_HOME_Y_ORIGIN (EEPROM_TMC2130_HOME_X_FSTEPS - 1) // uint8
// X-axis home bsteps (number of microsteps backward)
# define EEPROM_TMC2130_HOME_Y_BSTEPS (EEPROM_TMC2130_HOME_Y_ORIGIN - 1) // uint8
// X-axis home fsteps (number of microsteps forward)
# define EEPROM_TMC2130_HOME_Y_FSTEPS (EEPROM_TMC2130_HOME_Y_BSTEPS - 1) // uint8
// Accurate homing enabled
# define EEPROM_TMC2130_HOME_ENABLED (EEPROM_TMC2130_HOME_Y_FSTEPS - 1) // uint8
////////////////////////////////////////
// TMC2130 uStep linearity correction
// Linearity correction factor (XYZE)
# define EEPROM_TMC2130_WAVE_X_FAC (EEPROM_TMC2130_HOME_ENABLED - 1) // uint8
# define EEPROM_TMC2130_WAVE_Y_FAC (EEPROM_TMC2130_WAVE_X_FAC - 1) // uint8
# define EEPROM_TMC2130_WAVE_Z_FAC (EEPROM_TMC2130_WAVE_Y_FAC - 1) // uint8
# define EEPROM_TMC2130_WAVE_E_FAC (EEPROM_TMC2130_WAVE_Z_FAC - 1) // uint8
////////////////////////////////////////
// TMC2130 uStep resolution
// microstep resolution (XYZE): usteps = (256 >> mres)
# define EEPROM_TMC2130_X_MRES (EEPROM_TMC2130_WAVE_E_FAC - 1) // uint8
# define EEPROM_TMC2130_Y_MRES (EEPROM_TMC2130_X_MRES - 1) // uint8
# define EEPROM_TMC2130_Z_MRES (EEPROM_TMC2130_Y_MRES - 1) // uint8
# define EEPROM_TMC2130_E_MRES (EEPROM_TMC2130_Z_MRES - 1) // uint8
// HW
# define EEPROM_PRINTER_TYPE (EEPROM_TMC2130_E_MRES - 2) // uint16
# define EEPROM_BOARD_TYPE (EEPROM_PRINTER_TYPE - 2) // uint16
// Extruder multiplier for power panic
# define EEPROM_EXTRUDER_MULTIPLIER_0 (EEPROM_BOARD_TYPE - 4) //float
# define EEPROM_EXTRUDER_MULTIPLIER_1 (EEPROM_EXTRUDER_MULTIPLIER_0 - 4) //float
# define EEPROM_EXTRUDER_MULTIPLIER_2 (EEPROM_EXTRUDER_MULTIPLIER_1 - 4) //float
# define EEPROM_EXTRUDEMULTIPLY (EEPROM_EXTRUDER_MULTIPLIER_2 - 2) // uint16
# define EEPROM_UVLO_TINY_CURRENT_POSITION_Z (EEPROM_EXTRUDEMULTIPLY-4) // float
2020-01-27 13:59:18 +00:00
# define EEPROM_UVLO_TARGET_HOTEND (EEPROM_UVLO_TINY_CURRENT_POSITION_Z-2) // uint16
2018-07-23 18:04:47 +00:00
// Sound Mode
2020-01-27 13:59:18 +00:00
# define EEPROM_SOUND_MODE (EEPROM_UVLO_TARGET_HOTEND-1) // uint8
2018-08-10 14:10:49 +00:00
# define EEPROM_AUTO_DEPLETE (EEPROM_SOUND_MODE-1) //bool
2018-07-23 18:04:47 +00:00
2018-10-04 13:48:28 +00:00
# define EEPROM_FSENS_OQ_MEASS_ENABLED (EEPROM_AUTO_DEPLETE - 1) //bool
2018-12-12 21:32:47 +00:00
# define EEPROM_MMU_FAIL_TOT (EEPROM_FSENS_OQ_MEASS_ENABLED - 2) //uint16_t
# define EEPROM_MMU_FAIL (EEPROM_MMU_FAIL_TOT - 1) //uint8_t
# define EEPROM_MMU_LOAD_FAIL_TOT (EEPROM_MMU_FAIL - 2) //uint16_t
# define EEPROM_MMU_LOAD_FAIL (EEPROM_MMU_LOAD_FAIL_TOT - 1) //uint8_t
2019-02-27 16:34:03 +00:00
# define EEPROM_MMU_CUTTER_ENABLED (EEPROM_MMU_LOAD_FAIL - 1)
2019-03-01 13:55:55 +00:00
# define EEPROM_UVLO_MESH_BED_LEVELING_FULL (EEPROM_MMU_CUTTER_ENABLED - 12*12*2) //allow 12 calibration points for future expansion
2018-12-12 21:32:47 +00:00
2019-02-28 18:42:09 +00:00
# define EEPROM_MBL_TYPE (EEPROM_UVLO_MESH_BED_LEVELING_FULL-1) //uint8_t for mesh bed leveling precision
2019-03-08 14:43:37 +00:00
# define EEPROM_MBL_MAGNET_ELIMINATION (EEPROM_MBL_TYPE -1)
# define EEPROM_MBL_POINTS_NR (EEPROM_MBL_MAGNET_ELIMINATION -1) //uint8_t number of points in one exis for mesh bed leveling
2019-03-13 14:05:10 +00:00
# define EEPROM_MBL_PROBE_NR (EEPROM_MBL_POINTS_NR-1) //number of measurements for each point
2019-06-12 15:32:13 +00:00
2019-03-10 15:03:46 +00:00
# define EEPROM_MMU_STEALTH (EEPROM_MBL_PROBE_NR-1)
2019-06-03 14:53:55 +00:00
2019-06-12 15:32:13 +00:00
# define EEPROM_CHECK_MODE (EEPROM_MMU_STEALTH-1) // uint8
2019-03-13 23:36:56 +00:00
# define EEPROM_NOZZLE_DIAMETER (EEPROM_CHECK_MODE-1) // uint8
# define EEPROM_NOZZLE_DIAMETER_uM (EEPROM_NOZZLE_DIAMETER-2) // uint16
2019-07-10 19:03:30 +00:00
# define EEPROM_CHECK_MODEL (EEPROM_NOZZLE_DIAMETER_uM-1) // uint8
# define EEPROM_CHECK_VERSION (EEPROM_CHECK_MODEL-1) // uint8
# define EEPROM_CHECK_GCODE (EEPROM_CHECK_VERSION-1) // uint8
2019-03-13 23:36:56 +00:00
2019-07-10 19:03:30 +00:00
# define EEPROM_SHEETS_BASE (EEPROM_CHECK_GCODE - EEPROM_SHEETS_SIZEOF) // Sheets
2019-07-09 15:38:24 +00:00
static Sheets * const EEPROM_Sheets_base = ( Sheets * ) ( EEPROM_SHEETS_BASE ) ;
2019-06-20 14:40:53 +00:00
2019-09-15 22:43:37 +00:00
# define EEPROM_FSENSOR_PCB (EEPROM_SHEETS_BASE-1) // uint8
# define EEPROM_FSENSOR_ACTION_NA (EEPROM_FSENSOR_PCB-1) // uint8
2019-10-15 19:23:50 +00:00
# define EEPROM_UVLO_SAVED_TARGET (EEPROM_FSENSOR_ACTION_NA - 4*4) // 4 x float for saved target for all axes
2019-10-19 16:48:02 +00:00
# define EEPROM_UVLO_FEEDMULTIPLY (EEPROM_UVLO_SAVED_TARGET - 2) // uint16_t for feedmultiply
2019-07-10 16:41:12 +00:00
2019-12-14 08:08:52 +00:00
# define EEPROM_BACKLIGHT_LEVEL_HIGH (EEPROM_UVLO_FEEDMULTIPLY-1) // uint8
2019-10-17 10:11:32 +00:00
# define EEPROM_BACKLIGHT_LEVEL_LOW (EEPROM_BACKLIGHT_LEVEL_HIGH-1) // uint8
# define EEPROM_BACKLIGHT_MODE (EEPROM_BACKLIGHT_LEVEL_LOW-1) // uint8
2019-10-18 07:32:41 +00:00
# define EEPROM_BACKLIGHT_TIMEOUT (EEPROM_BACKLIGHT_MODE-2) // uint16
2019-07-10 16:41:12 +00:00
2019-12-18 16:03:54 +00:00
# define EEPROM_UVLO_LA_K (EEPROM_BACKLIGHT_TIMEOUT-4) // float
2019-07-10 16:41:12 +00:00
2020-07-20 16:35:25 +00:00
# define EEPROM_ALTFAN_OVERRIDE (EEPROM_UVLO_LA_K-1) //uint8
2020-07-29 08:23:24 +00:00
# define EEPROM_EXPERIMENTAL_VISIBILITY (EEPROM_ALTFAN_OVERRIDE-1) //uint8
2020-12-07 14:32:19 +00:00
# define EEPROM_PINDA_TEMP_COMPENSATION (EEPROM_EXPERIMENTAL_VISIBILITY-1) //uint8
2021-01-14 09:52:22 +00:00
# define EEPROM_PRUSA_SN (EEPROM_PINDA_TEMP_COMPENSATION-20) //char[20]
2021-01-31 23:02:49 +00:00
# define EEPROM_UVLO_ACCELL (EEPROM_PRUSA_SN-4) // float
# define EEPROM_UVLO_RETRACT_ACCELL (EEPROM_UVLO_ACCELL-4) // float
# define EEPROM_UVLO_TRAVEL_ACCELL (EEPROM_UVLO_RETRACT_ACCELL-4) // float
2021-04-01 17:37:07 +00:00
# define EEPROM_JOB_ID (EEPROM_UVLO_TRAVEL_ACCELL-4) //uint32_t
2021-04-23 14:06:28 +00:00
# define EEPROM_ECOOL_ENABLE (EEPROM_JOB_ID-1) // uint8_t
2021-06-12 12:41:54 +00:00
# define EEPROM_FW_CRASH_FLAG (EEPROM_ECOOL_ENABLE-1) // uint8_t
2021-04-23 14:06:28 +00:00
2022-06-26 11:13:59 +00:00
# define EEPROM_TEMP_MODEL_ENABLE (EEPROM_FW_CRASH_FLAG-1) // uint8_t
# define EEPROM_TEMP_MODEL_P (EEPROM_TEMP_MODEL_ENABLE-4) // float
# define EEPROM_TEMP_MODEL_C (EEPROM_TEMP_MODEL_P-4) // float
# define EEPROM_TEMP_MODEL_R (EEPROM_TEMP_MODEL_C-4*16) // float[16]
# define EEPROM_TEMP_MODEL_Ta_corr (EEPROM_TEMP_MODEL_R-4) // float
# define EEPROM_TEMP_MODEL_W (EEPROM_TEMP_MODEL_Ta_corr-4) // float
# define EEPROM_TEMP_MODEL_E (EEPROM_TEMP_MODEL_W-4) // float
2019-06-19 13:09:07 +00:00
//This is supposed to point to last item to allow EEPROM overrun check. Please update when adding new items.
2022-06-26 11:13:59 +00:00
# define EEPROM_LAST_ITEM EEPROM_TEMP_MODEL_E
2018-07-23 18:04:47 +00:00
// !!!!!
// !!!!! this is end of EEPROM section ... all updates MUST BE inserted before this mark !!!!!
// !!!!!
// Currently running firmware, each digit stored as uint16_t.
// The flavor differentiates a dev, alpha, beta, release candidate or a release version.
# define EEPROM_FIRMWARE_VERSION_END (FW_PRUSA3D_MAGIC_LEN+8)
# define EEPROM_FIRMWARE_VERSION_FLAVOR (FW_PRUSA3D_MAGIC_LEN+6)
# define EEPROM_FIRMWARE_VERSION_REVISION (FW_PRUSA3D_MAGIC_LEN+4)
# define EEPROM_FIRMWARE_VERSION_MINOR (FW_PRUSA3D_MAGIC_LEN+2)
# define EEPROM_FIRMWARE_VERSION_MAJOR FW_PRUSA3D_MAGIC_LEN
// Magic string, indicating that the current or the previous firmware running was the Prusa3D firmware.
# define EEPROM_FIRMWARE_PRUSA_MAGIC 0
2021-04-23 14:06:28 +00:00
# define EEPROM_ECOOL_MAGIC_NUMBER 42
2018-07-23 18:04:47 +00:00
2018-10-08 18:24:56 +00:00
# ifdef __cplusplus
# include "ConfigurationStore.h"
2019-06-19 13:09:07 +00:00
static_assert ( EEPROM_FIRMWARE_VERSION_END < 20 , " Firmware version EEPROM address conflicts with EEPROM_M500_base " ) ;
2020-12-06 12:27:32 +00:00
static M500_conf * const EEPROM_M500_base = reinterpret_cast < M500_conf * > ( 20 ) ; //offset for storing settings using M500
2019-06-19 13:09:07 +00:00
static_assert ( ( ( sizeof ( M500_conf ) + 20 ) < EEPROM_LAST_ITEM ) , " M500_conf address space conflicts with previous items. " ) ;
2018-10-08 18:24:56 +00:00
# endif
2019-05-30 18:46:41 +00:00
enum
{
EEPROM_MMU_CUTTER_ENABLED_enabled = 1 ,
EEPROM_MMU_CUTTER_ENABLED_always = 2 ,
} ;
2019-08-29 15:21:08 +00:00
# ifdef __cplusplus
void eeprom_init ( ) ;
2019-08-30 10:24:13 +00:00
bool eeprom_is_sheet_initialized ( uint8_t sheet_num ) ;
2019-08-29 15:21:08 +00:00
struct SheetName
{
char c [ sizeof ( Sheet : : name ) + 1 ] ;
} ;
2019-08-30 10:24:13 +00:00
void eeprom_default_sheet_name ( uint8_t index , SheetName & sheetName ) ;
int8_t eeprom_next_initialized_sheet ( int8_t sheet ) ;
void eeprom_switch_to_next_sheet ( ) ;
2019-08-29 15:21:08 +00:00
# endif
2018-07-23 18:04:47 +00:00
# endif // EEPROM_H
