3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
fd96b79ea9
Prusa-Firmware/Firmware/eeprom.h

663 lines
70 KiB
C
Raw Normal View History

Started EEPROM Table doxygen documentation
2020-03-12 11:34:33 +00:00
/**
* @file
Added author and version of document
2020-03-22 14:22:14 +00:00
* @author 3d-gussner
Started EEPROM Table doxygen documentation
2020-03-12 11:34:33 +00:00
*/
/** \ingroup eeprom_table */
replace tab with spaces fix cherry-pick issues
2022-09-28 15:37:46 +00:00
Started EEPROM Table doxygen documentation
2020-03-12 11:34:33 +00:00
//! _This is a EEPROM table of currently implemented in Prusa firmware (dynamically generated from doxygen)._
PowerPanic & Sound
2018-07-23 18:04:47 +00:00
#ifndef EEPROM_H
#define EEPROM_H
Add steel sheet profile selector.
2019-06-20 14:40:53 +00:00
#include <stdint.h>
EEPROM_BABYSTEP_Z using removal
2019-10-01 14:57:37 +00:00
#define MAX_SHEETS 8
#define MAX_SHEET_NAME_LENGTH 7
Move function declaration and structs declarations to top of eeprom.h file.
2019-07-09 11:38:58 +00:00
typedef struct
{
EEPROM_BABYSTEP_Z using removal
2019-10-01 14:57:37 +00:00
char name[MAX_SHEET_NAME_LENGTH]; //!< Can be null terminated, doesn't need to be null terminated
Move function declaration and structs declarations to top of eeprom.h file.
2019-07-09 11:38:58 +00:00
int16_t z_offset; //!< Z_BABYSTEP_MIN .. Z_BABYSTEP_MAX = Z_BABYSTEP_MIN*2/1000 [mm] .. Z_BABYSTEP_MAX*2/1000 [mm]
Add notices about Sheet::bed_temp and Sheet::pinda_temp being unused There is a potential for 2*8 bytes of extra sparse eeprom space, plus a few bytes saved if we remove the update calls, so add a notice that these values are currently only written-to, but never actually used.
2022-05-11 09:15:36 +00:00
uint8_t bed_temp; //!< 0 .. 254 [°C] NOTE: currently only written-to and never used
uint8_t pinda_temp; //!< 0 .. 254 [°C] NOTE: currently only written-to and never used
Move function declaration and structs declarations to top of eeprom.h file.
2019-07-09 11:38:58 +00:00
} Sheet;
typedef struct
{
EEPROM_BABYSTEP_Z using removal
2019-10-01 14:57:37 +00:00
Sheet s[MAX_SHEETS];
Move function declaration and structs declarations to top of eeprom.h file.
2019-07-09 11:38:58 +00:00
uint8_t active_sheet;
} Sheets;
// sizeof(Sheets). Do not change it unless EEPROM_Sheets_base is last item in EEPROM.
// Otherwise it would move following items.
Increase number of configurable steel sheets to 8. Move sheets into sub menu of HW setup.
2019-08-29 15:21:08 +00:00
#define EEPROM_SHEETS_SIZEOF 89
Move function declaration and structs declarations to top of eeprom.h file.
2019-07-09 11:38:58 +00:00
#ifdef __cplusplus
static_assert(sizeof(Sheets) == EEPROM_SHEETS_SIZEOF, "Sizeof(Sheets) is not EEPROM_SHEETS_SIZEOF.");
#endif
Started EEPROM Table doxygen documentation
2020-03-12 11:34:33 +00:00
/** @defgroup eeprom_table EEPROM Table
replace tab with spaces fix cherry-pick issues
2022-09-28 15:37:46 +00:00
*
Started EEPROM Table doxygen documentation
2020-03-12 11:34:33 +00:00
---------------------------------------------------------------------------------
EEPROM 8-bit Empty value = 0xFFh 255
replace tab with spaces fix cherry-pick issues
2022-09-28 15:37:46 +00:00
Started EEPROM Table doxygen documentation
2020-03-12 11:34:33 +00:00
EEPROM 16-bit Empty value = 0xFFFFh 65535
replace tab with spaces fix cherry-pick issues
2022-09-28 15:37:46 +00:00
fix some typos
2020-03-23 14:47:59 +00:00
_Italic = unused or default_
replace tab with spaces fix cherry-pick issues
2022-09-28 15:37:46 +00:00
Added Italic and Bold to highlight some settings
2020-03-22 14:18:45 +00:00
__Bold = Status__
replace tab with spaces fix cherry-pick issues
2022-09-28 15:37:46 +00:00
In Default/FactoryReset column the
- __L__ Language
- __S__ Statistics
- __P__ Shipping prep
- __M__ Service/Maintenance prep
- __S/P__ Statistics and Shipping prep
Added S/P to Default/FactoryReset S = Statistics P = shipping Prepare
2020-03-23 15:54:35 +00:00
will overwrite existing values to 0 or default.
Typo. thanks @leptun
2020-03-25 16:44:43 +00:00
A FactoryReset All Data will overwrite the whole EEPROM with ffh and some values will be initialized automatically,
Added language factory reset and some other minor fixes
2020-03-23 16:10:40 +00:00
others need a reset / reboot.
replace tab with spaces fix cherry-pick issues
2022-09-28 15:37:46 +00:00
Started EEPROM Table doxygen documentation
2020-03-12 11:34:33 +00:00
---------------------------------------------------------------------------------
How can you use the debug codes?
- Serial terminal like Putty.
- Octoprint does support D-codes
minor changes + added EEPROM_FREE_NRx ... Some EEPROM allocations do not use the hole allocated space: - EEPROM_FARM_NUMBER is only numeric 000-999 and only uses 2 bytes to store the Farm number BUT allocated 3 bytes. Added EEPROM_FREE_NR1 as free space that can be used - EEPROM_CRASH_DET just changes 1 byte to save it status [on/off] but allocated 5 bytes. Added EEPROM_FREE_NR2 to EEPROM_FREE_NR5 as free space that can be used
2020-03-23 10:40:07 +00:00
- _Pronterface_ does __not__ support D-codes
Started EEPROM Table doxygen documentation
2020-03-12 11:34:33 +00:00
All done... hope not I forgot one. I will re-test all `D3 Axyyyy Cz` before creating a PR.
2020-03-22 13:08:21 +00:00
### !!! D-codes are case sensitive so please don't use upper case A,C or X in the address you want to read !!!
replace tab with spaces fix cherry-pick issues
2022-09-28 15:37:46 +00:00
fix some typos
2020-03-23 14:47:59 +00:00
#### Useful tools/links:
replace tab with spaces fix cherry-pick issues
2022-09-28 15:37:46 +00:00
To convert hex to ascii https://www.rapidtables.com/convert/number/hex-to-ascii.html
To convert hex to dec https://www.rapidtables.com/convert/number/hex-to-decimal.html
Version: 1.0.2
Started EEPROM Table doxygen documentation
2020-03-12 11:34:33 +00:00
---------------------------------------------------------------------------------
replace tab with spaces fix cherry-pick issues
2022-09-28 15:37:46 +00:00
|Address begin|Bit/Type | Name | Valid values | Default/FactoryReset | Description |Gcode/Function| Debug code
| :-- | :-- | :-- | :--: | :--: | :-- | :--: | :--:
| 0x0FFF 4095 | uchar | EEPROM_SILENT | 00h 0 | ffh 255 | TMC Stealth mode: __off__ / miniRambo Power mode | LCD menu | D3 Ax0fff C1
| ^ | ^ | ^ | 01h 1 | ^ | TMC Stealth mode: __on__ / miniRambo Silent mode | ^ | ^
| ^ | ^ | ^ | 02h 2 | ^ | miniRambo Auto mode | ^ | ^
| 0x0FFE 4094 | uchar | EEPROM_LANG | 00h 0 | ffh 255 __L__ | English / LANG_ID_PRI | LCD menu | D3 Ax0ffe C1
| ^ | ^ | ^ | 01h 1 | ^ | Other language LANG_ID_SEC | ^ | ^
| 0x0FFC 4092 | uint16 | EEPROM_BABYSTEP_X | ??? | ff ffh 65535 | Babystep for X axis _unsued_ | ??? | D3 Ax0ffc C2
| 0x0FFA 4090 | uint16 | EEPROM_BABYSTEP_Y | ??? | ff ffh 65535 | Babystep for Y axis _unsued_ | ^ | D3 Ax0ffa C2
| 0x0FF8 4088 | uint16 | EEPROM_BABYSTEP_Z | ??? | ff ffh 65535 | Babystep for Z axis _lagacy_ | ^ | D3 Ax0ff8 C2
| ^ | ^ | ^ | ^ | ^ | multiple values stored now in EEPROM_Sheets_base | ^ | ^
Replace calibration state with a new calibration bitmap - Move calibration status/declarations to util.h - Allows to query the status of each step independently without assuming any order - Allows to extend the calibration with new steps transparently
2022-12-23 18:35:00 +00:00
| 0x0FF7 4087 | uint8 | EEPROM_CALIBRATION_STATUS_V1 | ffh 255 | ffh 255 | Calibration status (<v3.12) | ??? | D3 Ax0ff7 C1
replace tab with spaces fix cherry-pick issues
2022-09-28 15:37:46 +00:00
| ^ | ^ | ^ | 01h 1 | ^ | Calibrated | ^ | ^
| ^ | ^ | ^ | e6h 230 | ^ | needs Live Z adjustment | ^ | ^
eeprom: Document new calibration state
2022-12-12 17:22:20 +00:00
| ^ | ^ | ^ | ebh 235 | ^ | needs Temp Model calibration | ^ | ^
replace tab with spaces fix cherry-pick issues
2022-09-28 15:37:46 +00:00
| ^ | ^ | ^ | f0h 240 | ^ __P__ | needs Z calibration | ^ | ^
| ^ | ^ | ^ | fah 250 | ^ | needs XYZ calibration | ^ | ^
Replace calibration state with a new calibration bitmap - Move calibration status/declarations to util.h - Allows to query the status of each step independently without assuming any order - Allows to extend the calibration with new steps transparently
2022-12-23 18:35:00 +00:00
| ^ | ^ | ^ | 00h 0 | ^ | Unknown (legacy) | ^ | ^
replace tab with spaces fix cherry-pick issues
2022-09-28 15:37:46 +00:00
| 0x0FF5 4085 | uint16 | EEPROM_BABYSTEP_Z0 | ??? | ff ffh 65535 | Babystep for Z ??? | ??? | D3 Ax0ff5 C2
| 0x0FF1 4081 | unint32 | EEPROM_FILAMENTUSED | ??? | 00 00 00 00h 0 __S/P__| Filament used in meters | ??? | D3 Ax0ff1 C4
| 0x0FED 4077 | unint32 | EEPROM_TOTALTIME | ??? | 00 00 00 00h 0 __S/P__| Total print time | ??? | D3 Ax0fed C4
| 0x0FE5 4069 | float | EEPROM_BED_CALIBRATION_CENTER | ??? | ff ff ff ffh | ??? | ??? | D3 Ax0fe5 C8
| 0x0FDD 4061 | float | EEPROM_BED_CALIBRATION_VEC_X | ??? | ff ff ff ffh | ??? | ??? | D3 Ax0fdd C8
| 0x0FD5 4053 | float | EEPROM_BED_CALIBRATION_VEC_Y | ??? | ff ff ff ffh | ??? | ??? | D3 Ax0fd5 C8
| 0x0FC5 4037 | int16 | EEPROM_BED_CALIBRATION_Z_JITTER | ??? | ff ffh 65535 | ??? | ??? | D3 Ax0fc5 C16
| 0x0FC4 4036 | bool | EEPROM_FARM_MODE | 00h 0 | ffh 255 __P__ | Prusa farm mode: __off__ | G99 | D3 Ax0fc4 C1
| ^ | ^ | ^ | 01h 1 | ^ | Prusa farm mode: __on__ | G98 | ^
| 0x0FC3 4035 | free | _EEPROM_FREE_NR1_ | ??? | ffh 255 | _Free EEPROM space_ | _free space_ | D3 Ax0fc3 C1
| 0x0FC1 4033 | ??? | EEPROM_FARM_NUMBER | 000-999 | ff ffh / 000 __P__ | Prusa farm number _only 0-9 are allowed: 000-999_ | LCD menu | D3 Ax0fc1 C2
| 0x0FC0 4032 | bool | EEPROM_BED_CORRECTION_VALID | 00h 0 | 00h 0 | Bed correction invalid | ??? | D3 Ax0fc0 C1
| ^ | ^ | ^ | ffh 255 | ^ | Bed correction valid | ??? | ^
| 0x0FBF 4031 | char | EEPROM_BED_CORRECTION_LEFT | 00h ffh | 00h 0 | Bed manual correction left | LCD menu | D3 Ax0fbf C1
| ^ | ^ | ^ | ^ | ^ | At this moment limited to +-100um | G80 Lxxx | ^
| 0x0FBE 4030 | char | EEPROM_BED_CORRECTION_RIGHT | 00h ffh | 00h 0 | Bed manual correction right | LCD menu | D3 Ax0fbe C1
| ^ | ^ | ^ | ^ | ^ | At this moment limited to +-100um | G80 Rxxx | ^
| 0x0FBD 4029 | char | EEPROM_BED_CORRECTION_FRONT | 00h ffh | 00h 0 | Bed manual correction front | LCD menu | D3 Ax0fbd C1
| ^ | ^ | ^ | ^ | ^ | At this moment limited to +-100um | G80 Fxxx | ^
| 0x0FBC 4028 | char | EEPROM_BED_CORRECTION_BACK | 00h ffh | 00h 0 | Bed manual correction back | LCD menu | D3 Ax0fbc C1
| ^ | ^ | ^ | ^ | ^ | At this moment limited to +-100um | G80 Bxxx | ^
| 0x0FBB 4027 | bool | EEPROM_TOSHIBA_FLASH_AIR_COMPATIBLITY | 00h 0 | ffh 255 | Toshiba Air: __off__ | LCD menu | D3 Ax0fbb C1
| ^ | ^ | ^ | 01h 1 | ^ | Toshiba Air: __on__ | ^ | ^
| 0x0FBA 4026 | uchar | EEPROM_PRINT_FLAG | ??? | ??? | _unsued_ | ??? | D3 Ax0fba C1
| 0x0FB0 4016 | int16 | EEPROM_PROBE_TEMP_SHIFT | ??? | ??? | ??? | ??? | D3 Ax0fb0 C10
| 0x0FAF 4015 | bool | EEPROM_TEMP_CAL_ACTIVE | 00h 0 | 00h 0 | PINDA Temp cal.: __inactive__ | LCD menu | D3 Ax0faf C1
| ^ | ^ | ^ | ffh 255 | ^ | PINDA Temp cal.: __active__ | ^ | ^
| 0x0FA7 4007 | ??? | _EEPROM_FREE_NR6_ | ??? | ffh 255 | _Free EEPROM space_ | ??? | D3 Ax0fae C8
| ^ | ^ | ^ | ^ | 00 00 00 00h | ^ | ^ | ^
| 0x0FA6 4006 | uint8 | EEPROM_CALIBRATION_STATUS_PINDA | 00h 0 | ffh 255 | PINDA Temp: __not calibrated__ | ??? | D3 Ax0fa6 C1
| ^ | ^ | ^ | 01h 1 | ^ | PINDA Temp: __calibrated__ | ^ | ^
| 0x0FA5 4005 | uint8 | EEPROM_UVLO | 00h 0 | ffh 255 | Power Panic flag: __inactive__ | ??? | D3 Ax0fa5 C1
| ^ | ^ | ^ | 01h 1 | ^ | Power Panic flag: __active__ | ^ | ^
| ^ | ^ | ^ | 02h 2 | ^ | Power Panic flag: __???__ | ^ | ^
| 0x0F9D 3997 | float | EEPROM_UVLO_CURRENT_POSITION | ??? | ffh 255 | Power Panic position | ??? | D3 Ax0f9d C8
| 0x0F95 3989 | char | EEPROM_FILENAME | ??? | ffh 255 | Power Panic Filename | ??? | D3 Ax0f95 C8
| 0x0F91 3985 | unint32 | EEPROM_FILE_POSITION | ??? | ff ff ff ffh | Power Panic File Position | ??? | D3 Ax0f91 C4
| 0x0F8D 3981 | float | EEPROM_UVLO_CURRENT_POSITION_Z | ??? | ff ff ff ffh | Power Panic Z Position | ^ | D3 Ax0f8d C4
| 0x0F8C 3980 | ??? | EEPROM_UVLO_UNUSED_001 | ??? | ffh 255 | Power Panic _unused_ | ^ | D3 Ax0f8c C1
| 0x0F8B 3979 | uint8 | EEPROM_UVLO_TARGET_BED | ??? | ffh 255 | Power Panic Bed temperature | ^ | D3 Ax0f8b C1
| 0x0F89 3977 | uint16 | EEPROM_UVLO_FEEDRATE | ??? | ff ffh 65535 | Power Panic Feedrate | ^ | D3 Ax0f89 C2
| 0x0F88 3976 | uint8 | EEPROM_UVLO_FAN_SPEED | ??? | ffh 255 | Power Panic Fan speed | ^ | D3 Ax0f88 C1
| 0x0F87 3975 | uint8 | EEPROM_FAN_CHECK_ENABLED | 00h 0 | ??? | Fan Check __disabled__ | LCD menu | D3 Ax0f87 C1
| ^ | ^ | ^ | 01h 1 | ffh 255 | Fan Check __enabled__ | ^ | ^
| 0x0F75 3957 | uint16 | EEPROM_UVLO_MESH_BED_LEVELING | ??? | ff ffh 65535 | Power Panic Mesh Bed Leveling | ??? | D3 Ax0f75 C18
| 0x0F73 3955 | uint16 | EEPROM_UVLO_Z_MICROSTEPS | ??? | ff ffh 65535 | Power Panic Z microsteps | ??? | D3 Ax0f73 C2
| 0x0F72 3954 | uint8 | EEPROM_UVLO_E_ABS | ??? | ffh 255 | Power Panic ??? position | ??? | D3 Ax0f72 C1
| 0x0F6E 3950 | float | EEPROM_UVLO_CURRENT_POSITION_E | ??? | ff ff ff ffh | Power Panic E position | ??? | D3 Ax0f6e C4
| 0x0F6C 3948 | uint16 | EEPROM_UVLO_SAVED_SEGMENT_IDX | all | ff ffh 65535 | Power Panic index of multi-segment move | ??? | D3 Ax0f6c C2
| 0x0F6B 3947 | ??? | _EEPROM_FREE_NR4_ | ??? | ffh 255 | _Free EEPROM space_ | _free space_ | D3 Ax0f6b C1
| 0x0F6A 3946 | ??? | _EEPROM_FREE_NR5_ | ??? | ffh 255 | _Free EEPROM space_ | _free space_ | D3 Ax0f6a C1
| 0x0F69 3945 | uint8 | EEPROM_CRASH_DET | ffh 255 | ffh 255 | Crash detection: __enabled__ | LCD menu | D3 Ax0f69 C1
| ^ | ^ | ^ | 00h 0 | ^ | Crash detection: __disabled__ | LCD menu | ^
| 0x0F68 3944 | uint8 | EEPROM_CRASH_COUNT_Y | 00h-ffh 0-255| ffh 255 __S/P__ | Crashes detected on y axis | ??? | D3 Ax0f68 C1
| 0x0F67 3943 | uint8 | EEPROM_FSENSOR | 01h 1 | ffh 255 __P__ | Filament sensor: __enabled__ | LCD menu | D3 Ax0f67 C1
| ^ | ^ | ^ | 00h 0 | ^ | Filament sensor: __disabled__ | LCD menu | ^
| 0x0F65 3942 | uint8 | EEPROM_CRASH_COUNT_X | 00h-ffh 0-255| ffh 255 __S/P__ | Crashes detected on x axis | ??? | D3 Ax0f66 C1
| 0x0F65 3941 | uint8 | EEPROM_FERROR_COUNT | 00h-ffh 0-255| ffh 255 __S/P__ | Filament sensor error counter | ??? | D3 Ax0f65 C1
| 0x0F64 3940 | uint8 | EEPROM_POWER_COUNT | 00h-ffh 0-255| ffh 255 __S/P__ | Power failure counter | ??? | D3 Ax0f64 C1
| 0x0F60 3936 | float | EEPROM_XYZ_CAL_SKEW | ??? | ff ff ff ffh | XYZ skew value | ??? | D3 Ax0f60 C4
| 0x0F5F 3935 | uint8 | EEPROM_WIZARD_ACTIVE | 01h 1 | 01h 1 __P__ | Wizard __active__ | ??? | D3 Ax0f5f C1
| ^ | ^ | ^ | 00h 0 | ^ | Wizard __inactive__ | ^ | ^
| ^ | ^ | ^ | 02h 2 | 02h 2 __M__ | Wizard active - Z cal after shipping/service prep | ^ | ^
| 0x0F5D 3933 | uint16 | EEPROM_BELTSTATUS_X | ??? | ff ffh | X Beltstatus | ??? | D3 Ax0f5d C2
| 0x0F5B 3931 | uint16 | EEPROM_BELTSTATUS_Y | ??? | ff ffh | Y Beltstatus | ??? | D3 Ax0f5b C2
| 0x0F5A 3930 | uint8 | EEPROM_DIR_DEPTH | 00h-ffh 0-255| ffh 255 | Directory depth | ??? | D3 Ax0f5a C1
| 0x0F0A 3850 | uint8 | EEPROM_DIRS | ??? | ffh 255 | Directories ??? | ??? | D3 Ax0f0a C80
| 0x0F09 3849 | uint8 | EEPROM_SD_SORT | 00h 0 | ffh 255 | SD card sort by: __time__ | LCD menu | D3 Ax0f09 C1
| ^ | ^ | ^ | 01h 1 | ^ | SD card sort by: __alphabet__ | LCD menu | ^
| ^ | ^ | ^ | 02h 2 | ^ | SD card: __not sorted__ | LCD menu | ^
| 0x0F08 3848 | uint8 | EEPROM_SECOND_SERIAL_ACTIVE | 00h 0 | ffh 255 | RPi Port: __disabled__ | LCD menu | D3 Ax0f08 C1
| ^ | ^ | ^ | 01h 1 | ^ | RPi Port: __enabled__ | LCD menu | ^
| 0x0F07 3847 | uint8 | EEPROM_FSENS_AUTOLOAD_ENABLED | 01h 1 | ffh 255 __P__ | Filament autoload: __enabled__ | LCD menu | D3 Ax0f07 C1
| ^ | ^ | ^ | 00h 0 | ^ | Filament autoload: __disabled__ | LCD menu | ^
| 0x0F05 3845 | uint16 | EEPROM_CRASH_COUNT_X_TOT | 0000-fffe | ff ffh __S/P__ | Total crashes on x axis | ??? | D3 Ax0f05 C2
| 0x0F03 3843 | uint16 | EEPROM_CRASH_COUNT_Y_TOT | 0000-fffe | ff ffh __S/P__ | Total crashes on y axis | ??? | D3 Ax0f03 C2
| 0x0F01 3841 | uint16 | EEPROM_FERROR_COUNT_TOT | 0000-fffe | ff ffh __S/P__ | Total filament sensor errors | ??? | D3 Ax0f01 C2
| 0x0EFF 3839 | uint16 | EEPROM_POWER_COUNT_TOT | 0000-fffe | ff ffh __S/P__ | Total power failures | ??? | D3 Ax0eff C2
| 0x0EFE 3838 | uint8 | EEPROM_TMC2130_HOME_X_ORIGIN | ??? | ffh 255 | ??? | ??? | D3 Ax0efe C1
| 0x0EFD 3837 | uint8 | EEPROM_TMC2130_HOME_X_BSTEPS | ??? | ffh 255 | ??? | ??? | D3 Ax0efd C1
| 0x0EFC 3836 | uint8 | EEPROM_TMC2130_HOME_X_FSTEPS | ??? | ffh 255 | ??? | ??? | D3 Ax0efc C1
| 0x0EFB 3835 | uint8 | EEPROM_TMC2130_HOME_Y_ORIGIN | ??? | ffh 255 | ??? | ??? | D3 Ax0efb C1
| 0x0EFA 3834 | uint8 | EEPROM_TMC2130_HOME_Y_BSTEPS | ??? | ffh 255 | ??? | ??? | D3 Ax0efa C1
| 0x0EF9 3833 | uint8 | EEPROM_TMC2130_HOME_Y_FSTEPS | ??? | ffh 255 | ??? | ??? | D3 Ax0ef9 C1
| 0x0EF8 3832 | uint8 | EEPROM_TMC2130_HOME_ENABLED | ??? | ffh 255 | ??? | ??? | D3 Ax0ef8 C1
| 0x0EF7 3831 | uint8 | EEPROM_TMC2130_WAVE_X_FAC | ??? | ffh 255 | ??? | ??? | D3 Ax0ef7 C1
| 0x0EF6 3830 | uint8 | EEPROM_TMC2130_WAVE_Y_FAC | ??? | ffh 255 | ??? | ??? | D3 Ax0ef6 C1
| 0x0EF5 3829 | uint8 | EEPROM_TMC2130_WAVE_Z_FAC | ??? | ffh 255 | ??? | ??? | D3 Ax0ef5 C1
| 0x0EF4 3828 | uint8 | EEPROM_TMC2130_WAVE_E_FAC | ??? | ffh 255 | ??? | ??? | D3 Ax0ef4 C1
| 0x0EF3 3827 | uint8 | EEPROM_TMC2130_X_MRES | ??? | ffh 255 | ??? | ??? | D3 Ax0ef3 C1
| 0x0EF2 3826 | uint8 | EEPROM_TMC2130_Y_MRES | ??? | ffh 255 | ??? | ??? | D3 Ax0ef2 C1
| 0x0EF1 3825 | uint8 | EEPROM_TMC2130_Z_MRES | ??? | ffh 255 | ??? | ??? | D3 Ax0ef1 C1
| 0x0EF0 3824 | uint8 | EEPROM_TMC2130_E_MRES | ??? | ffh 255 | ??? | ??? | D3 Ax0ef0 C1
| 0x0EEE 3822 | uint16 | EEPROM_PRINTER_TYPE | ??? | ff ffh 65535 | Printer Type | ??? | D3 Ax0eee C2
| ^ | ^ | ^ | 64 00h 100 | ^ | PRINTER_MK1 | ??? | ^
| ^ | ^ | ^ | c8 00h 200 | ^ | PRINTER_MK2 | ??? | ^
| ^ | ^ | ^ | c9 00h 201 | ^ | PRINTER_MK2 with MMU1 | ??? | ^
| ^ | ^ | ^ | ca 00h 202 | ^ | PRINTER_MK2S | ??? | ^
| ^ | ^ | ^ | cb 00h 203 | ^ | PRINTER_MK2S with MMU1 | ??? | ^
| ^ | ^ | ^ | fa 00h 250 | ^ | PRINTER_MK2.5 | ??? | ^
| ^ | ^ | ^ | 1a 4fh 20250 | ^ | PRINTER_MK2.5 with MMU2 | ??? | ^
| ^ | ^ | ^ | fc 00h 252 | ^ | PRINTER_MK2.5S | ??? | ^
| ^ | ^ | ^ | 1c 4fh 20252 | ^ | PRINTER_MK2.5S with MMU2S | ??? | ^
| ^ | ^ | ^ | 2c 01h 300 | ^ | PRINTER_MK3 | ??? | ^
| ^ | ^ | ^ | 4c 4fh 20300 | ^ | PRINTER_MK3 with MMU2 | ??? | ^
| ^ | ^ | ^ | 2e 01h 302 | ^ | PRINTER_MK3S | ??? | ^
| ^ | ^ | ^ | 4e 4fh 20302 | ^ | PRINTER_MK3S with MMU2S | ??? | ^
| 0x0EEC 3820 | uint16 | EEPROM_BOARD_TYPE | ??? | ff ffh 65535 | Board Type | ??? | D3 Ax0eec C2
| ^ | ^ | ^ | c8 00h 200 | ^ | BOARD_RAMBO_MINI_1_0 | ??? | ^
| ^ | ^ | ^ | cb 00h 203 | ^ | BOARD_RAMBO_MINI_1_3 | ??? | ^
| ^ | ^ | ^ | 36 01h 310 | ^ | BOARD_EINSY_1_0a | ??? | ^
| 0x0EE8 3816 | float | EEPROM_EXTRUDER_MULTIPLIER_0 | ??? | ff ff ff ffh | Power panic Extruder 0 multiplier | ??? | D3 Ax0ee8 C4
| 0x0EE4 3812 | float | EEPROM_EXTRUDER_MULTIPLIER_1 | ??? | ff ff ff ffh | Power panic Extruder 1 multiplier | ??? | D3 Ax0ee4 C4
| 0x0EE0 3808 | float | EEPROM_EXTRUDER_MULTIPLIER_2 | ??? | ff ff ff ffh | Power panic Extruder 2 multiplier | ??? | D3 Ax0ee0 C4
| 0x0EDE 3806 | uint16 | EEPROM_EXTRUDEMULTIPLY | ??? | ff ffh 65535 | Power panic Extruder multiplier | ??? | D3 Ax0ede C2
| 0x0EDA 3802 | float | EEPROM_UVLO_TINY_CURRENT_POSITION_Z | ??? | ff ff ff ffh | Power panic Z position | ??? | D3 Ax0eda C4
| 0x0ED8 3800 | uint16 | EEPROM_UVLO_TARGET_HOTEND | ??? | ff ffh 65535 | Power panic target Hotend temperature | ??? | D3 Ax0ed8 C2
| 0x0ED7 3799 | uint8 | EEPROM_SOUND_MODE | 00h 0 | ffh 255 | Sound mode: __loud__ | ??? | D3 Ax0ed7 C1
| ^ | ^ | ^ | 01h 1 | ^ | Sound mode: __once__ | ^ | ^
| ^ | ^ | ^ | 02h 2 | ^ | Sound mode: __silent__ | ^ | ^
| ^ | ^ | ^ | 03h 3 | ^ | Sound mode: __assist__ | ^ | ^
| 0x0ED6 3798 | bool | EEPROM_SPOOL_JOIN | 01h 1 | ffh 255 | MMU2/s autodeplete: __on__ | ??? | D3 Ax0ed6 C1
| ^ | ^ | ^ | 00h 0 | ^ | MMU2/s autodeplete: __off__ | ^ | ^
| 0x0ED5 3797 | bool | EEPROM_FSENS_RUNOUT_ENABLED | 01h 1 | ffh 255 __P__ | Filament runout: __enabled__ | LCD menu | D3 Ax0ed5 C1
| ^ | ^ | ^ | 00h 0 | ^ | Filament runout: __disabled__ | LCD menu | ^
| 0x0ED3 3795 | uint16 | EEPROM_MMU_FAIL_TOT | ??? | ff ffh 65535 __S/P__ | MMU2/s total failures | ??? | D3 Ax0ed3 C2
| 0x0ED2 3794 | uint8 | EEPROM_MMU_FAIL | ??? | ffh 255 __S/P__ | MMU2/s fails during print | ??? | D3 Ax0ed2 C1
| 0x0ED0 3792 | uint16 | EEPROM_MMU_LOAD_FAIL_TOT | ??? | ff ffh 65535 __S/P__ | MMU2/s total load failures | ??? | D3 Ax0ed0 C2
| 0x0ECF 3791 | uint8 | EEPROM_MMU_LOAD_FAIL | ??? | ffh 255 __S/P__ | MMU2/s load failures during print | ??? | D3 Ax0ecf C1
| 0x0ECE 3790 | uint8 | EEPROM_MMU_CUTTER_ENABLED | 00h 0 | ffh 255 | MMU2/s cutter: __disabled__ | LCD menu | D3 Ax0ece C1
| ^ | ^ | ^ | 01h 1 | ^ | MMU2/s cutter: __enabled__ | ^ | ^
| ^ | ^ | ^ | 02h 2 | ^ | MMU2/s cutter: __always__ | ^ | ^
| 0x0DAE 3502 | uint16 | EEPROM_UVLO_MESH_BED_LEVELING_FULL | ??? | ff ffh 65535 | Power panic Mesh bed leveling points | ??? | D3 Ax0dae C288
| 0x0DAD 3501 | uint8 | EEPROM_MBL_TYPE | ??? | ffh 255 | Mesh bed leveling precision _unused atm_ | ??? | D3 Ax0dad C1
| 0x0DAC 3500 | bool | EEPROM_MBL_MAGNET_ELIMINATION | 01h 1 | ffh 255 | Mesh bed leveling does: __ignores__ magnets | LCD menu | D3 Ax0dac C1
| ^ | ^ | ^ | 00h 0 | ^ | Mesh bed leveling does: __NOT ignores__ magnets | ^ | ^
| 0x0DAB 3499 | uint8 | EEPROM_MBL_POINTS_NR | 03h 3 | ffh 255 | Mesh bed leveling points: __3x3__ | LCD menu | D3 Ax0dab C1
| ^ | ^ | ^ | 07h 7 | ^ | Mesh bed leveling points: __7x7__ | ^ | ^
| 0x0DAA 3498 | uint8 | EEPROM_MBL_PROBE_NR | 03h 3 | ffh 255 | MBL times measurements for each point: __3__ | LCD menu | D3 Ax0daa C1
| ^ | ^ | ^ | 05h 5 | ^ | MBL times measurements for each point: __5__ | ^ | ^
| ^ | ^ | ^ | 01h 1 | ^ | MBL times measurements for each point: __1__ | ^ | ^
| 0x0DA9 3497 | uint8 | EEPROM_MMU_STEALTH | 01h 1 | ffh 255 | MMU2/s Silent mode: __on__ | ??? | D3 Ax0da9 C1
| ^ | ^ | ^ | 00h 0 | ^ | MMU2/s Silent mode: __off__ | ^ | ^
| 0x0DA8 3496 | uint8 | EEPROM_CHECK_MODE | 01h 1 | ffh 255 | Check mode for nozzle is: __warn__ | LCD menu | D3 Ax0da8 C1
| ^ | ^ | ^ | 02h 2 | ^ | Check mode for nozzle is: __strict__ | ^ | ^
| ^ | ^ | ^ | 00h 0 | ^ | Check mode for nozzle is: __none__ | ^ | ^
| 0x0DA7 3495 | uint8 | EEPROM_NOZZLE_DIAMETER | 28h 40 | ffh 255 | Nozzle diameter is: __40 or 0.40mm__ | LCD menu | D3 Ax0da7 C1
| ^ | ^ | ^ | 3ch 60 | ^ | Nozzle diameter is: __60 or 0.60mm__ | ^ | ^
| ^ | ^ | ^ | 3ch 80 | ^ | Nozzle diameter is: __80 or 0.80mm__ | ^ | ^
| ^ | ^ | ^ | 19h 25 | ^ | Nozzle diameter is: __25 or 0.25mm__ | ^ | ^
| 0x0DA5 3493 | uint16 | EEPROM_NOZZLE_DIAMETER_uM | 9001h | ff ffh 65535 | Nozzle diameter is: __400um__ | LCD menu | D3 Ax0da5 C2
| ^ | ^ | ^ | 5802h | ^ | Nozzle diameter is: __600um__ | ^ | ^
| ^ | ^ | ^ | 2003h | ^ | Nozzle diameter is: __800um__ | ^ | ^
| ^ | ^ | ^ | fa00h | ^ | Nozzle diameter is: __250um__ | ^ | ^
| 0x0DA4 3492 | uint8 | EEPROM_CHECK_MODEL | 01h 1 | ffh 255 | Check mode for printer model is: __warn__ | LCD menu | D3 Ax0da4 C1
| ^ | ^ | ^ | 02h 2 | ^ | Check mode for printer model is: __strict__ | ^ | ^
| ^ | ^ | ^ | 00h 0 | ^ | Check mode for printer model is: __none__ | ^ | ^
| 0x0DA3 3491 | uint8 | EEPROM_CHECK_VERSION | 01h 1 | ffh 255 | Check mode for firmware is: __warn__ | LCD menu | D3 Ax0da3 C1
| ^ | ^ | ^ | 02h 2 | ^ | Check mode for firmware is: __strict__ | ^ | ^
| ^ | ^ | ^ | 00h 0 | ^ | Check mode for firmware is: __none__ | ^ | ^
| 0x0DA2 3490 | uint8 | EEPROM_CHECK_GCODE | 01h 1 | ffh 255 | Check mode for gcode is: __warn__ _unused atm_ | LCD menu | D3 Ax0da2 C1
| ^ | ^ | ^ | 02h 2 | ^ | Check mode for gcode is: __strict__ _unused atm_ | ^ | ^
| ^ | ^ | ^ | 00h 0 | ^ | Check mode for gcode is: __none__ _unused atm_ | ^ | ^
| 0x0D49 3401 | uint16 | EEPROM_SHEETS_BASE | ??? | ffh 255 | ??? | LCD menu | D3 Ax0d49 C89
| 0x0D49 3401 | char | _1st Sheet block_ |536d6f6f746831| ffffffffffffff | 1st sheet - Name: _Smooth1_ | ^ | D3 Ax0d49 C7
| 0x0D50 3408 | uint16 | ^ | 00 00h 0 | ff ffh 65535 | 1st sheet - Z offset | ^ | D3 Ax0d50 C2
| 0x0D52 3410 | uint8 | ^ | 00h 0 | ffh 255 | 1st sheet - bed temp | ^ | D3 Ax0d52 C1
| 0x0D53 3411 | uint8 | ^ | 00h 0 | ffh 255 | 1st sheet - PINDA temp | ^ | D3 Ax0d53 C1
| 0x0D54 3412 | char | _2nd Sheet block_ |536d6f6f746832| ffffffffffffff | 2nd sheet - Name: _Smooth2_ | ^ | D3 Ax0d54 C7
| 0x0D5B 3419 | uint16 | ^ | 00 00h 0 | ff ffh 65535 | 2nd sheet - Z offset | ^ | D3 Ax0d5b C2
| 0x0D5D 3421 | uint8 | ^ | 00h 0 | ffh 255 | 2nd sheet - bed temp | ^ | D3 Ax0d5d C1
| 0x0D5E 3422 | uint8 | ^ | 00h 0 | ffh 255 | 2nd sheet - PINDA temp | ^ | D3 Ax0d5e C1
| 0x0D5F 3423 | char | _3rd Sheet block_ |54657874757231| ffffffffffffff | 3rd sheet - Name: _Textur1_ | ^ | D3 Ax0d5f C7
| 0x0D66 3430 | uint16 | ^ | 00 00h 0 | ff ffh 65535 | 3rd sheet - Z offset | ^ | D3 Ax0d66 C2
| 0x0D68 3432 | uint8 | ^ | 00h 0 | ffh 255 | 3rd sheet - bed temp | ^ | D3 Ax0d68 C1
| 0x0D69 3433 | uint8 | ^ | 00h 0 | ffh 255 | 3rd sheet - PINDA temp | ^ | D3 Ax0d69 C1
| 0x0D6A 3434 | char | _4th Sheet block_ |54657874757232| ffffffffffffff | 4th sheet - Name: _Textur2_ | ^ | D3 Ax0d6a C7
| 0x0D71 3441 | uint16 | ^ | 00 00h 0 | ff ffh 65535 | 4th sheet - Z offset | ^ | D3 Ax0d71 C2
| 0x0D73 3443 | uint8 | ^ | 00h 0 | ffh 255 | 4th sheet - bed temp | ^ | D3 Ax0d73 C1
| 0x0D74 3444 | uint8 | ^ | 00h 0 | ffh 255 | 4th sheet - PINDA temp | ^ | D3 Ax0d74 C1
Rename Sheets - `Satin 1` to `Satin ` - `Satin 2` to `NylonPA`
2022-10-18 08:20:01 +00:00
| 0x0D75 3445 | char | _5th Sheet block_ |536174696e2020| ffffffffffffff | 5th sheet - Name: _Satin _ | ^ | D3 Ax0d75 C7
replace tab with spaces fix cherry-pick issues
2022-09-28 15:37:46 +00:00
| 0x0D7C 3452 | uint16 | ^ | 00 00h 0 | ff ffh 65535 | 5th sheet - Z offset | ^ | D3 Ax0d7c C2
| 0x0D7E 3454 | uint8 | ^ | 00h 0 | ffh 255 | 5th sheet - bed temp | ^ | D3 Ax0d7e C1
| 0x0D7F 3455 | uint8 | ^ | 00h 0 | ffh 255 | 5th sheet - PINDA temp | ^ | D3 Ax0d7f C1
Rename Sheets - `Satin 1` to `Satin ` - `Satin 2` to `NylonPA`
2022-10-18 08:20:01 +00:00
| 0x0D80 3456 | char | _6th Sheet block_ |4e796c6f6e5041| ffffffffffffff | 6th sheet - Name: _NylonPA_ | ^ | D3 Ax0d80 C7
replace tab with spaces fix cherry-pick issues
2022-09-28 15:37:46 +00:00
| 0x0D87 3463 | uint16 | ^ | 00 00h 0 | ff ffh 65535 | 6th sheet - Z offset | ^ | D3 Ax0d87 C2
| 0x0D89 3465 | uint8 | ^ | 00h 0 | ffh 255 | 6th sheet - bed temp | ^ | D3 Ax0d89 C1
| 0x0D8A 3466 | uint8 | ^ | 00h 0 | ffh 255 | 6th sheet - PINDA temp | ^ | D3 Ax0d8a C1
| 0x0D8B 3467 | char | _7th Sheet block_ |437573746f6d31| ffffffffffffff | 7th sheet - Name: _Custom1_ | ^ | D3 Ax0d8b C7
| 0x0D92 3474 | uint16 | ^ | 00 00h 0 | ff ffh 65535 | 7th sheet - Z offset | ^ | D3 Ax0d92 C2
| 0x0D94 3476 | uint8 | ^ | 00h 0 | ffh 255 | 7th sheet - bed temp | ^ | D3 Ax0d94 C1
| 0x0D95 3477 | uint8 | ^ | 00h 0 | ffh 255 | 7th sheet - PINDA temp | ^ | D3 Ax0d95 C1
| 0x0D96 3478 | char | _8th Sheet block_ |437573746f6d32| ffffffffffffff | 8th sheet - Name: _Custom2_ | ^ | D3 Ax0d96 C7
| 0x0D9D 3485 | uint16 | ^ | 00 00h 0 | ff ffh 65535 | 8th sheet - Z offset | ^ | D3 Ax0d9d C2
| 0x0D9F 3487 | uint8 | ^ | 00h 0 | ffh 255 | 8th sheet - bed temp | ^ | D3 Ax0d9f C1
| 0x0DA0 3488 | uint8 | ^ | 00h 0 | ffh 255 | 8th sheet - PINDA temp | ^ | D3 Ax0da0 C1
backport: Sync new offsets from MK3
2022-12-28 19:29:28 +00:00
| 0x0DA1 3489 | uint8 | active_sheet | 00h 0 | ffh 255 | Active sheet index | ^ | D3 Ax0da1 C1
replace tab with spaces fix cherry-pick issues
2022-09-28 15:37:46 +00:00
| 0x0D48 3400 | uint8 | EEPROM_FSENSOR_PCB | ffh 255 | ffh 255 | Filament Sensor type IR unknown | LCD Support | D3 Ax0d48 C1
| ^ | ^ | ^ | 00h 0 | ^ | Filament Sensor type IR 0.3 or older | ^ | ^
| ^ | ^ | ^ | 01h 1 | ^ | Filament Sensor type IR 0.4 or newer | ^ | ^
| 0x0D47 3399 | uint8 | EEPROM_FSENSOR_ACTION_NA | 00h 0 | ffh 255 | Filament Sensor action: __Continue__ | LCD menu | D3 Ax0d47 C1
| ^ | ^ | ^ | 01h 1 | ^ | Filament Sensor action: __Pause__ | ^ | ^
| 0x0D37 3383 | float | EEPROM_UVLO_SAVED_START_POSITION | ??? | ff ff ff ffh | Power panic saved start position all-axis | ??? | D3 Ax0d37 C16
| ^ | ^ | ^ | ??? | ^ | Power panic saved start position e-axis | ^ | D3 Ax0d43 C4
| ^ | ^ | ^ | ??? | ^ | Power panic saved start position z-axis | ^ | D3 Ax0d3f C4
| ^ | ^ | ^ | ??? | ^ | Power panic saved start position y-axis | ^ | D3 Ax0d3b C4
| ^ | ^ | ^ | ??? | ^ | Power panic saved start position x-axis | ^ | D3 Ax0d37 C4
| 0x0D35 3381 | uint16 | EEPROM_UVLO_FEEDMULTIPLY | ??? | ff ffh 65355 | Power panic saved feed multiplier | ??? | D3 Ax0d35 C2
| 0x0D34 3380 | uint8 | EEPROM_BACKLIGHT_LEVEL_HIGH | 00h - ffh | 82h 130 | LCD backlight bright: __128__ Dim value to 255 | LCD menu | D3 Ax0d34 C1
| 0x0D33 3379 | uint8 | EEPROM_BACKLIGHT_LEVEL_LOW | 00h - ffh | 32h 50 | LCD backlight dim: __50__ 0 to Bright value | LCD menu | D3 Ax0d33 C1
| 0x0D32 3378 | uint8 | EEPROM_BACKLIGHT_MODE | 02h 2 | ffh 255 | LCD backlight mode: __Auto__ | LCD menu | D3 Ax0d32 C1
| ^ | ^ | ^ | 01h 1 | ^ | LCD backlight mode: __Bright__ | ^ | ^
| ^ | ^ | ^ | 00h 0 | ^ | LCD backlight mode: __Dim__ | ^ | ^
| 0x0D30 3376 | uint16 | EEPROM_BACKLIGHT_TIMEOUT | 01 00 - ff ff| 0a 00h 65535 | LCD backlight timeout: __10__ seconds | LCD menu | D3 Ax0d30 C2
| 0x0D2C 3372 | float | EEPROM_UVLO_LA_K | ??? | ff ff ff ffh | Power panic saved Linear Advanced K value | ??? | D3 Ax0d2c C4
| 0x0D2B 3371 | uint8 | EEPROM_ALTFAN_OVERRIDE | ffh 255 | ffh 255 | ALTFAN override unknown state | LCD menu | D3 Ax0d2b C1
| ^ | ^ | ^ | 00h 0 | ^ | ALTFAN override deactivated | ^ | ^
| ^ | ^ | ^ | 01h 1 | ^ | ALTFAN override activated | ^ | ^
| 0x0D2A 3370 | uint8 | EEPROM_EXPERIMENTAL_VISIBILITY | ffh 255 | ffh 255 | Experimental menu visibility unknown state | LCD menu | D3 Ax0d2a C1
| ^ | ^ | ^ | 00h 0 | ^ | Experimental menu visibility hidden | ^ | ^
| ^ | ^ | ^ | 01h 1 | ^ | Experimental menu visibility visible | ^ | ^
| 0x0D29 3369 | uint8 | EEPROM_PINDA_TEMP_COMPENSATION | ffh 255 | ffh 255 | PINDA temp compensation unknown state | LCD menu | D3 Ax0d29 C1
| ^ | ^ | ^ | 00h 0 | ^ | PINDA has no temp compensation PINDA v1/2 | ^ | ^
| ^ | ^ | ^ | 01h 1 | ^ | PINDA has temp compensation aka SuperPINDA | ^ | ^
| 0x0D15 3349 | char[20]| EEPROM_PRUSA_SN | SN[19] == 0 | ffffffffffffffff... | PRUSA Serial number string | PRUSA SN | D3 Ax0d15 C20
| 0x0D11 3345 | float | EEPROM_UVLO_ACCELL | ??? | ff ff ff ffh | Power panic saved normal acceleration | ??? | D3 Ax0d11 C4
| 0x0D0D 3341 | float | EEPROM_UVLO_RETRACT_ACCELL | ??? | ff ff ff ffh | Power panic saved retract acceleration | ??? | D3 Ax0d0d C4
| 0x0D09 3337 | float | EEPROM_UVLO_TRAVEL_ACCELL | ??? | ff ff ff ffh | Power panic saved travel acceleration | ??? | D3 Ax0d09 C4
| 0x0D05 3333 | unint32 | EEPROM_JOB_ID | ??? | 00 00 00 00h | Job ID used by host software | D3 only | D3 Ax0d05 C4
| 0x0D04 3332 | uint8 | EEPROM_ECOOL_ENABLE | ffh 255 | ^ | Disable extruder motor scaling for non-farm print | LCD menu | D3 Ax0d04 C1
| ^ | ^ | ^ | 2ah 42 | ^ | Enable extruder motor scaling for non-farm print | ^ | D3 Ax0d04 C1
Add Temp Model eeprom documentation
2022-09-28 16:15:23 +00:00
| 0x0D03 3331 | uint8 | EEPROM_FW_CRASH_FLAG | ffh 255 | ffh 255 | Last FW crash reason (dump_crash_reason) | D21/D22 | D3 Ax0d03 C1
replace tab with spaces fix cherry-pick issues
2022-09-28 15:37:46 +00:00
| ^ | ^ | ^ | 00h 0 | ^ | manual | ^ | ^
| ^ | ^ | ^ | 01h 1 | ^ | stack_error | ^ | ^
| ^ | ^ | ^ | 02h 2 | ^ | watchdog | ^ | ^
| ^ | ^ | ^ | 03h 3 | ^ | bad_isr | ^ | ^
| ^ | ^ | ^ | 04h 4 | ^ | bad_pullup_temp_isr | ^ | ^
| ^ | ^ | ^ | 05h 5 | ^ | bad_pullup_step_isr | ^ | ^
Add Temp Model eeprom documentation
2022-09-28 16:15:23 +00:00
| 0x0D02 3330 | uint8 | EEPROM_TEMP_MODEL_ENABLE | 00h 0 | ff/00 | Temp model deactivated | Temp model | D3 Ax0d02 C1
| ^ | ^ | ^ | 01h 1 | ^ | Temp model activated | ^ | ^
Fix Typo 0X0 to 0x0
2022-10-06 11:23:16 +00:00
| 0x0CFE 3326 | float | EEPROM_TEMP_MODEL_P | ??? | ff ff ff ffh | Temp model power (W) | Temp model | D3 Ax0cfe C4
| 0x0CFA 3322 | float | EEPROM_TEMP_MODEL_C | ??? | ff ff ff ffh | Temp model capacitance (J/K) | Temp model | D3 Ax0cfa C4
| 0x0CBA 3258 |float[16]| EEPROM_TEMP_MODEL_R | ??? | ff ff ff ffh | Temp model resistance (K/W) | Temp model | D3 Ax0cba C64
| 0x0CB6 3254 | float | EEPROM_TEMP_MODEL_Ta_corr | ??? | ff ff ff ffh | Temp model ambient temperature correction (K) | Temp model | D3 Ax0cb6 C4
| 0x0CB2 3250 | float | EEPROM_TEMP_MODEL_W | ??? | ff ff ff ffh | Temp model warning threshold (K/s) | Temp model | D3 Ax0cb2 C4
| 0x0CAE 3246 | float | EEPROM_TEMP_MODEL_E | ??? | ff ff ff ffh | Temp model error threshold (K/s) | Temp model | D3 Ax0cae C4
backport: Sync new offsets from MK3
2022-12-28 19:29:28 +00:00
| 0x0CAD 3245 | uint8 | EEPROM_FSENSOR_JAM_DETECTION | 01h 1 | ff/01 | fsensor pat9125 jam detection feature | LCD menu | D3 Ax0cad C1
| 0x0CAC 3244 | uint8 | EEPROM_MMU_ENABLED | 01h 1 | ff/01 | MMU enabled | LCD menu | D3 Ax0cac C1
| 0x0CA8 3240 | uint32 | EEPROM_TOTAL_TOOLCHANGE_COUNT | ??? | ff ff ff ffh | MMU toolchange counter over printers lifetime | LCD statistic| D3 Ax0ca8 C4
eeprom: Fix EEPROM_HEAT_BED_ON_LOAD_FILAMENT debug offset in docs
2022-12-23 15:42:30 +00:00
| 0x0CA7 3239 | uint8 | EEPROM_HEAT_BED_ON_LOAD_FILAMENT | ffh 255 | ffh 255 | Heat bed on load filament unknown state | LCD menu | D3 Ax0ca7 C1
backport: Sync new offsets from MK3
2022-12-28 19:29:28 +00:00
| ^ | ^ | ^ | 00h 0 | ^ | Do not heat bed on load filament | ^ | ^
| ^ | ^ | ^ | 01h 1 | ^ | Heat bed on load filament | ^ | ^
Replace calibration state with a new calibration bitmap - Move calibration status/declarations to util.h - Allows to query the status of each step independently without assuming any order - Allows to extend the calibration with new steps transparently
2022-12-23 18:35:00 +00:00
| 0x0CA6 3238 | uint8 | EEPROM_CALIBRATION_STATUS_V2 | ffh 255 | ffh 255 | Calibration status (>=v3.12) | ??? | D3 Ax0ca6 C1
Update calibration status v2 documentation
2023-01-02 07:59:05 +00:00
| ^ | ^ | ^ | 01h 1 | ^ | Selftest passed | ^ | ^
| ^ | ^ | ^ | 02h 2 | ^ | XYZ cal passed | ^ | ^
| ^ | ^ | ^ | 04h 4 | ^ | Z cal passed | ^ | ^
| ^ | ^ | ^ | 08h 8 | ^ | Temp model cal passed | ^ | ^
| ^ | ^ | ^ | 10h 16 | ^ | Live Adjust set | ^ | ^
| ^ | ^ | ^ | 20h 32 | ^ | Free bit | ^ | ^
| ^ | ^ | ^ | 40h 64 | ^ | Free bit | ^ | ^
Fix few values
2023-01-02 12:57:36 +00:00
| ^ | ^ | ^ | 80h 128 | ^ | Unknown | ^ | ^
TM: Allocate new eeprom parameters for PTC handling
2023-01-26 21:08:00 +00:00
| 0x0CA5 3237 | float | EEPROM_TEMP_MODEL_U | ??? | ff ff ff ffh | Temp model linear temperature coefficient (W/K/W) | Temp model | D3 Ax0ca5 C4
| 0x0CA1 3233 | float | EEPROM_TEMP_MODEL_V | ??? | ff ff ff ffh | Temp model linear temperature intercept (W/W) | Temp model | D3 Ax0ca1 C4
| 0x0C9D 3229 | float | EEPROM_TEMP_MODEL_D | ??? | ff ff ff ffh | Temp model sim. 1st order IIR filter factor | Temp model | D3 Ax0c9d C4
| 0x0C99 3225 | uint16 | EEPROM_TEMP_MODEL_L | 0-2160 | ff ffh | Temp model sim. response lag (ms) | Temp model | D3 Ax0c99 C2
replace tab with spaces fix cherry-pick issues
2022-09-28 15:37:46 +00:00
|Address begin|Bit/Type | Name | Valid values | Default/FactoryReset | Description |Gcode/Function| Debug code
| :--: | :--: | :--: | :--: | :--: | :--: | :--: | :--:
| 0x0012 18 | uint16 | EEPROM_FIRMWARE_VERSION_END | ??? | ff ffh 65535 | ??? | ??? | D3 Ax0012 C2
| 0x0010 16 | uint16 | EEPROM_FIRMWARE_VERSION_FLAVOR | ??? | ff ffh 65535 | ??? | ??? | D3 Ax0010 C2
| 0x000E 14 | uint16 | EEPROM_FIRMWARE_VERSION_REVISION | ??? | ff ffh 65535 | Firmware version revision number DEV/ALPHA/BETA/RC| ??? | D3 Ax000e C2
| 0x000C 12 | uint16 | EEPROM_FIRMWARE_VERSION_MINOR | ??? | ff ffh 65535 | Firmware version minor number | ??? | D3 Ax000c C2
| 0x000A 10 | uint16 | EEPROM_FIRMWARE_VERSION_MAJOR | ??? | ff ffh 65535 | Firmware version major number | ??? | D3 Ax000a C2
| 0x0000 0 | char | FW_PRUSA3D_MAGIC | ??? | ffffffffffffffffffff | __`PRUSA3DFW`__ | ??? | D3 Ax0000 C10
Added and tested more... ... have to take a short break
2020-03-20 11:36:26 +00:00
*/
All done... hope not I forgot one. I will re-test all `D3 Axyyyy Cz` before creating a PR.
2020-03-22 13:08:21 +00:00
print parameters checking
2019-07-03 15:21:11 +00:00
#define EEPROM_EMPTY_VALUE 0xFF
EEPROM_BABYSTEP_Z using removal
2019-10-01 14:57:37 +00:00
#define EEPROM_EMPTY_VALUE16 0xFFFF
EEPROM_JOB_ID
2021-04-01 17:37:07 +00:00
#define EEPROM_EMPTY_VALUE32 0xFFFFFFFFl
PowerPanic & Sound
2018-07-23 18:04:47 +00:00
// The total size of the EEPROM is
// 4096 for the Atmega2560
#define EEPROM_TOP 4096
#define EEPROM_SILENT 4095
#define EEPROM_LANG 4094
Document
2019-08-29 16:26:24 +00:00
#define EEPROM_BABYSTEP_X 4092 //unused
#define EEPROM_BABYSTEP_Y 4090 //unused
#define EEPROM_BABYSTEP_Z 4088 //legacy, multiple values stored now in EEPROM_Sheets_base
Replace calibration state with a new calibration bitmap - Move calibration status/declarations to util.h - Allows to query the status of each step independently without assuming any order - Allows to extend the calibration with new steps transparently
2022-12-23 18:35:00 +00:00
#define EEPROM_CALIBRATION_STATUS_V1 4087 // legacy, used up to v3.11
PowerPanic & Sound
2018-07-23 18:04:47 +00:00
#define EEPROM_BABYSTEP_Z0 4085
#define EEPROM_FILAMENTUSED 4081
// uint32_t
#define EEPROM_TOTALTIME 4077
#define EEPROM_BED_CALIBRATION_CENTER (EEPROM_TOTALTIME-2*4)
#define EEPROM_BED_CALIBRATION_VEC_X (EEPROM_BED_CALIBRATION_CENTER-2*4)
#define EEPROM_BED_CALIBRATION_VEC_Y (EEPROM_BED_CALIBRATION_VEC_X-2*4)
// Offsets of the Z heiths of the calibration points from the first point.
// The offsets are saved as 16bit signed int, scaled to tenths of microns.
#define EEPROM_BED_CALIBRATION_Z_JITTER (EEPROM_BED_CALIBRATION_VEC_Y-2*8)
#define EEPROM_FARM_MODE (EEPROM_BED_CALIBRATION_Z_JITTER-1)
minor changes + added EEPROM_FREE_NRx ... Some EEPROM allocations do not use the hole allocated space: - EEPROM_FARM_NUMBER is only numeric 000-999 and only uses 2 bytes to store the Farm number BUT allocated 3 bytes. Added EEPROM_FREE_NR1 as free space that can be used - EEPROM_CRASH_DET just changes 1 byte to save it status [on/off] but allocated 5 bytes. Added EEPROM_FREE_NR2 to EEPROM_FREE_NR5 as free space that can be used
2020-03-23 10:40:07 +00:00
#define EEPROM_FREE_NR1 (EEPROM_FARM_MODE-1)
#define EEPROM_FARM_NUMBER (EEPROM_FREE_NR1-2)
PowerPanic & Sound
2018-07-23 18:04:47 +00:00
// Correction of the bed leveling, in micrometers.
// Maximum 50 micrometers allowed.
// Bed correction is valid if set to 1. If set to zero or 255, the successive 4 bytes are invalid.
#define EEPROM_BED_CORRECTION_VALID (EEPROM_FARM_NUMBER-1)
#define EEPROM_BED_CORRECTION_LEFT (EEPROM_BED_CORRECTION_VALID-1)
#define EEPROM_BED_CORRECTION_RIGHT (EEPROM_BED_CORRECTION_LEFT-1)
#define EEPROM_BED_CORRECTION_FRONT (EEPROM_BED_CORRECTION_RIGHT-1)
#define EEPROM_BED_CORRECTION_REAR (EEPROM_BED_CORRECTION_FRONT-1)
#define EEPROM_TOSHIBA_FLASH_AIR_COMPATIBLITY (EEPROM_BED_CORRECTION_REAR-1)
#define EEPROM_PRINT_FLAG (EEPROM_TOSHIBA_FLASH_AIR_COMPATIBLITY-1)
replace tab with spaces fix cherry-pick issues
2022-09-28 15:37:46 +00:00
#define EEPROM_PROBE_TEMP_SHIFT (EEPROM_PRINT_FLAG - 2*5) //5 x int for storing pinda probe temp shift relative to 50 C; unit: motor steps
PowerPanic & Sound
2018-07-23 18:04:47 +00:00
#define EEPROM_TEMP_CAL_ACTIVE (EEPROM_PROBE_TEMP_SHIFT - 1)
Remove ancient SNMM code in the MK3 branch
2022-02-15 11:23:48 +00:00
#define _EEPROM_FREE_NR6_ (EEPROM_TEMP_CAL_ACTIVE - 2*4) //4 x int (used to be for bowden lengths for SNMM)
#define EEPROM_CALIBRATION_STATUS_PINDA (_EEPROM_FREE_NR6_ - 1) //0 - not calibrated; 1 - calibrated
PowerPanic & Sound
2018-07-23 18:04:47 +00:00
#define EEPROM_UVLO (EEPROM_CALIBRATION_STATUS_PINDA - 1) //1 - uvlo during print
#define EEPROM_UVLO_CURRENT_POSITION (EEPROM_UVLO-2*4) // 2 x float for current_position in X and Y axes
#define EEPROM_FILENAME (EEPROM_UVLO_CURRENT_POSITION - 8) //8chars to store filename without extension
replace tab with spaces fix cherry-pick issues
2022-09-28 15:37:46 +00:00
#define EEPROM_FILE_POSITION (EEPROM_FILENAME - 4) //32 bit for uint32_t file position
PowerPanic & Sound
2018-07-23 18:04:47 +00:00
#define EEPROM_UVLO_CURRENT_POSITION_Z (EEPROM_FILE_POSITION - 4) //float for current position in Z
Save/restore hotend temperatures above 255C in PowerPanic Use 2 bytes to store extruder temperature during UVLO. Re-use the storage of EEPROM_UVLO_TINY_Z_MICROSTEPS which has been freed by previous changes. Fixes #2303
2020-01-27 13:59:18 +00:00
#define EEPROM_UVLO_UNUSED_001 (EEPROM_UVLO_CURRENT_POSITION_Z - 1) // uint8_t (unused)
#define EEPROM_UVLO_TARGET_BED (EEPROM_UVLO_UNUSED_001 - 1)
Halve memory usage of saved feedrate Truncate the saved feedrate to an uint16_t. This is more than sufficient for recovery.
2019-10-19 19:45:50 +00:00
#define EEPROM_UVLO_FEEDRATE (EEPROM_UVLO_TARGET_BED - 2) //uint16_t
replace tab with spaces fix cherry-pick issues
2022-09-28 15:37:46 +00:00
#define EEPROM_UVLO_FAN_SPEED (EEPROM_UVLO_FEEDRATE - 1)
PowerPanic & Sound
2018-07-23 18:04:47 +00:00
#define EEPROM_FAN_CHECK_ENABLED (EEPROM_UVLO_FAN_SPEED - 1)
#define EEPROM_UVLO_MESH_BED_LEVELING (EEPROM_FAN_CHECK_ENABLED - 9*2)
Rewrite uvlo handling for accurate Z re/positioning - In both uvlo_ and uvlo_tiny, calculate Z usteps properly and adjust the Z position to a true fullstep before disabling the motor. This avoids shifs during recovery. - In uvlo_tiny, instead of moving up indefinitely, adjust Z just once using the smallest move possible (new def UVLO_TINY_Z_AXIS_SHIFT) - Perform all the uvlo/recovery processing in physical coordinates and MBL off: there should be no automatic Z movement! - Disable heaters in both handlers to conserve more power. - Add timing information to uvlo_tiny too. - During recovery, to switch between physical and logical positioning introduce a new "PRUSA MBL" gcode as most of the procedure is enqueued, and no existing gcode was available.
2020-01-26 16:35:50 +00:00
#define EEPROM_UVLO_Z_MICROSTEPS (EEPROM_UVLO_MESH_BED_LEVELING - 2) // uint16_t (could be removed)
PowerPanic & Sound
2018-07-23 18:04:47 +00:00
#define EEPROM_UVLO_E_ABS (EEPROM_UVLO_Z_MICROSTEPS - 1)
#define EEPROM_UVLO_CURRENT_POSITION_E (EEPROM_UVLO_E_ABS - 4) //float for current position in E
Fix power panic handling
2022-08-15 12:25:28 +00:00
#define EEPROM_UVLO_SAVED_SEGMENT_IDX (EEPROM_UVLO_CURRENT_POSITION_E - 2) //uint16_t
PowerPanic & Sound
2018-07-23 18:04:47 +00:00
Fix power panic handling
2022-08-15 12:25:28 +00:00
#define EEPROM_FREE_NR4 (EEPROM_UVLO_SAVED_SEGMENT_IDX - 1) // FREE EEPROM SPACE
typo dedine doesn't work
2020-03-23 13:51:40 +00:00
#define EEPROM_FREE_NR5 (EEPROM_FREE_NR4 - 1) // FREE EEPROM SPACE
Fix power panic handling
2022-08-15 12:25:28 +00:00
replace tab with spaces fix cherry-pick issues
2022-09-28 15:37:46 +00:00
// Crash detection mode EEPROM setting
#define EEPROM_CRASH_DET (EEPROM_FREE_NR5 - 1) // uint8 (orig EEPROM_UVLO_MESH_BED_LEVELING-12)
PowerPanic & Sound
2018-07-23 18:04:47 +00:00
// Crash detection counter Y (last print)
#define EEPROM_CRASH_COUNT_Y (EEPROM_CRASH_DET - 1) // uint8 (orig EEPROM_UVLO_MESH_BED_LEVELING-15)
replace tab with spaces fix cherry-pick issues
2022-09-28 15:37:46 +00:00
// Filament sensor on/off EEPROM setting
#define EEPROM_FSENSOR (EEPROM_CRASH_COUNT_Y - 1) // uint8 (orig EEPROM_UVLO_MESH_BED_LEVELING-14)
PowerPanic & Sound
2018-07-23 18:04:47 +00:00
// Crash detection counter X (last print)
#define EEPROM_CRASH_COUNT_X (EEPROM_FSENSOR - 1) // uint8 (orig EEPROM_UVLO_MESH_BED_LEVELING-15)
// Filament runout/error coutner (last print)
#define EEPROM_FERROR_COUNT (EEPROM_CRASH_COUNT_X - 1) // uint8 (orig EEPROM_UVLO_MESH_BED_LEVELING-16)
// Power loss errors (last print)
#define EEPROM_POWER_COUNT (EEPROM_FERROR_COUNT - 1) // uint8 (orig EEPROM_UVLO_MESH_BED_LEVELING-17)
#define EEPROM_XYZ_CAL_SKEW (EEPROM_POWER_COUNT - 4) // float for skew backup
Make a special welcome message for shipping/service prep Another request from our Service dept. - the user shall be prevented from skipping the intro wizard, because otherwise some preset/calibrated features will look like not done - especially live-z calibration. And since there are users, who send a machine to service to perform 1st layer calibration only, they must not omit the Z-calibration at the start after shipping.
2021-02-17 11:53:56 +00:00
#define EEPROM_WIZARD_ACTIVE (EEPROM_XYZ_CAL_SKEW - 1) // 0: wizard not active, 1: wizard active, 2: wizard active without yes/no = forced calibrate Z after shipping/service prep.
PowerPanic & Sound
2018-07-23 18:04:47 +00:00
#define EEPROM_BELTSTATUS_X (EEPROM_WIZARD_ACTIVE - 2) // uint16
#define EEPROM_BELTSTATUS_Y (EEPROM_BELTSTATUS_X - 2) // uint16
#define EEPROM_DIR_DEPTH (EEPROM_BELTSTATUS_Y-1)
#define EEPROM_DIRS (EEPROM_DIR_DEPTH-80) //8 chars for each dir name, max 10 levels
#define EEPROM_SD_SORT (EEPROM_DIRS - 1) //0 -time, 1-alpha, 2-none
#define EEPROM_SECOND_SERIAL_ACTIVE (EEPROM_SD_SORT - 1)
#define EEPROM_FSENS_AUTOLOAD_ENABLED (EEPROM_SECOND_SERIAL_ACTIVE - 1)
// Crash detection counter X (total)
#define EEPROM_CRASH_COUNT_X_TOT (EEPROM_FSENS_AUTOLOAD_ENABLED - 2) // uint16
// Crash detection counter Y (total)
#define EEPROM_CRASH_COUNT_Y_TOT (EEPROM_CRASH_COUNT_X_TOT - 2) // uint16
// Filament runout/error coutner (total)
#define EEPROM_FERROR_COUNT_TOT (EEPROM_CRASH_COUNT_Y_TOT - 2) // uint16
// Power loss errors (total)
#define EEPROM_POWER_COUNT_TOT (EEPROM_FERROR_COUNT_TOT - 2) // uint16
////////////////////////////////////////
replace tab with spaces fix cherry-pick issues
2022-09-28 15:37:46 +00:00
// TMC2130 Accurate sensorless homing
PowerPanic & Sound
2018-07-23 18:04:47 +00:00
// X-axis home origin (stepper phase in microsteps, 0..63 for 16ustep resolution)
#define EEPROM_TMC2130_HOME_X_ORIGIN (EEPROM_POWER_COUNT_TOT - 1) // uint8
// X-axis home bsteps (number of microsteps backward)
#define EEPROM_TMC2130_HOME_X_BSTEPS (EEPROM_TMC2130_HOME_X_ORIGIN - 1) // uint8
// X-axis home fsteps (number of microsteps forward)
#define EEPROM_TMC2130_HOME_X_FSTEPS (EEPROM_TMC2130_HOME_X_BSTEPS - 1) // uint8
// Y-axis home origin (stepper phase in microsteps, 0..63 for 16ustep resolution)
#define EEPROM_TMC2130_HOME_Y_ORIGIN (EEPROM_TMC2130_HOME_X_FSTEPS - 1) // uint8
// X-axis home bsteps (number of microsteps backward)
#define EEPROM_TMC2130_HOME_Y_BSTEPS (EEPROM_TMC2130_HOME_Y_ORIGIN - 1) // uint8
// X-axis home fsteps (number of microsteps forward)
#define EEPROM_TMC2130_HOME_Y_FSTEPS (EEPROM_TMC2130_HOME_Y_BSTEPS - 1) // uint8
// Accurate homing enabled
#define EEPROM_TMC2130_HOME_ENABLED (EEPROM_TMC2130_HOME_Y_FSTEPS - 1) // uint8
////////////////////////////////////////
// TMC2130 uStep linearity correction
// Linearity correction factor (XYZE)
#define EEPROM_TMC2130_WAVE_X_FAC (EEPROM_TMC2130_HOME_ENABLED - 1) // uint8
#define EEPROM_TMC2130_WAVE_Y_FAC (EEPROM_TMC2130_WAVE_X_FAC - 1) // uint8
#define EEPROM_TMC2130_WAVE_Z_FAC (EEPROM_TMC2130_WAVE_Y_FAC - 1) // uint8
#define EEPROM_TMC2130_WAVE_E_FAC (EEPROM_TMC2130_WAVE_Z_FAC - 1) // uint8
////////////////////////////////////////
// TMC2130 uStep resolution
// microstep resolution (XYZE): usteps = (256 >> mres)
#define EEPROM_TMC2130_X_MRES (EEPROM_TMC2130_WAVE_E_FAC - 1) // uint8
#define EEPROM_TMC2130_Y_MRES (EEPROM_TMC2130_X_MRES - 1) // uint8
#define EEPROM_TMC2130_Z_MRES (EEPROM_TMC2130_Y_MRES - 1) // uint8
#define EEPROM_TMC2130_E_MRES (EEPROM_TMC2130_Z_MRES - 1) // uint8
// HW
#define EEPROM_PRINTER_TYPE (EEPROM_TMC2130_E_MRES - 2) // uint16
#define EEPROM_BOARD_TYPE (EEPROM_PRINTER_TYPE - 2) // uint16
// Extruder multiplier for power panic
#define EEPROM_EXTRUDER_MULTIPLIER_0 (EEPROM_BOARD_TYPE - 4) //float
#define EEPROM_EXTRUDER_MULTIPLIER_1 (EEPROM_EXTRUDER_MULTIPLIER_0 - 4) //float
#define EEPROM_EXTRUDER_MULTIPLIER_2 (EEPROM_EXTRUDER_MULTIPLIER_1 - 4) //float
#define EEPROM_EXTRUDEMULTIPLY (EEPROM_EXTRUDER_MULTIPLIER_2 - 2) // uint16
#define EEPROM_UVLO_TINY_CURRENT_POSITION_Z (EEPROM_EXTRUDEMULTIPLY-4) // float
Save/restore hotend temperatures above 255C in PowerPanic Use 2 bytes to store extruder temperature during UVLO. Re-use the storage of EEPROM_UVLO_TINY_Z_MICROSTEPS which has been freed by previous changes. Fixes #2303
2020-01-27 13:59:18 +00:00
#define EEPROM_UVLO_TARGET_HOTEND (EEPROM_UVLO_TINY_CURRENT_POSITION_Z-2) // uint16
PowerPanic & Sound
2018-07-23 18:04:47 +00:00
// Sound Mode
Save/restore hotend temperatures above 255C in PowerPanic Use 2 bytes to store extruder temperature during UVLO. Re-use the storage of EEPROM_UVLO_TINY_Z_MICROSTEPS which has been freed by previous changes. Fixes #2303
2020-01-27 13:59:18 +00:00
#define EEPROM_SOUND_MODE (EEPROM_UVLO_TARGET_HOTEND-1) // uint8
Add auto deplete setting.
2018-08-10 14:10:49 +00:00
#define EEPROM_AUTO_DEPLETE (EEPROM_SOUND_MODE-1) //bool
PowerPanic & Sound
2018-07-23 18:04:47 +00:00
Enable/disable optical quality meassurement in settings menu
2018-10-04 13:48:28 +00:00
#define EEPROM_FSENS_OQ_MEASS_ENABLED (EEPROM_AUTO_DEPLETE - 1) //bool
duplicit T-codes execution improved, E-stepper movements when waiting for ok from mmu, continue loading function improved, eeprom: fail stats for mmu
2018-12-12 21:32:47 +00:00
#define EEPROM_MMU_FAIL_TOT (EEPROM_FSENS_OQ_MEASS_ENABLED - 2) //uint16_t
#define EEPROM_MMU_FAIL (EEPROM_MMU_FAIL_TOT - 1) //uint8_t
#define EEPROM_MMU_LOAD_FAIL_TOT (EEPROM_MMU_FAIL - 2) //uint16_t
#define EEPROM_MMU_LOAD_FAIL (EEPROM_MMU_LOAD_FAIL_TOT - 1) //uint8_t
Store cutter enable state in EEPROM.
2019-02-27 16:34:03 +00:00
#define EEPROM_MMU_CUTTER_ENABLED (EEPROM_MMU_LOAD_FAIL - 1)
Merge branch 'MK3' into bad_load_cut
2019-03-01 13:55:55 +00:00
#define EEPROM_UVLO_MESH_BED_LEVELING_FULL (EEPROM_MMU_CUTTER_ENABLED - 12*12*2) //allow 12 calibration points for future expansion
duplicit T-codes execution improved, E-stepper movements when waiting for ok from mmu, continue loading function improved, eeprom: fail stats for mmu
2018-12-12 21:32:47 +00:00
menu switch - initial
2019-02-28 18:42:09 +00:00
#define EEPROM_MBL_TYPE (EEPROM_UVLO_MESH_BED_LEVELING_FULL-1) //uint8_t for mesh bed leveling precision
replace tab with spaces fix cherry-pick issues
2022-09-28 15:37:46 +00:00
#define EEPROM_MBL_MAGNET_ELIMINATION (EEPROM_MBL_TYPE -1)
G80 parameters configurable via settings menu
2019-03-08 14:43:37 +00:00
#define EEPROM_MBL_POINTS_NR (EEPROM_MBL_MAGNET_ELIMINATION -1) //uint8_t number of points in one exis for mesh bed leveling
mbl settings initialization fix
2019-03-13 14:05:10 +00:00
#define EEPROM_MBL_PROBE_NR (EEPROM_MBL_POINTS_NR-1) //number of measurements for each point
Merge branch 'MK3' into PFW-790
2019-06-12 15:32:13 +00:00
number of Z-probes defualt value changed from 4 to 3, mmu stealth mode switch in settings menu
2019-03-10 15:03:46 +00:00
#define EEPROM_MMU_STEALTH (EEPROM_MBL_PROBE_NR-1)
Save/restore K during a power panic
2019-06-03 14:53:55 +00:00
Merge branch 'MK3' into PFW-790
2019-06-12 15:32:13 +00:00
#define EEPROM_CHECK_MODE (EEPROM_MMU_STEALTH-1) // uint8
print parameters checking nozzle diameter
2019-03-13 23:36:56 +00:00
#define EEPROM_NOZZLE_DIAMETER (EEPROM_CHECK_MODE-1) // uint8
#define EEPROM_NOZZLE_DIAMETER_uM (EEPROM_NOZZLE_DIAMETER-2) // uint16
Reorder EEPROM items to allow possible future grow for Sheets struct.
2019-07-10 19:03:30 +00:00
#define EEPROM_CHECK_MODEL (EEPROM_NOZZLE_DIAMETER_uM-1) // uint8
#define EEPROM_CHECK_VERSION (EEPROM_CHECK_MODEL-1) // uint8
#define EEPROM_CHECK_GCODE (EEPROM_CHECK_VERSION-1) // uint8
print parameters checking nozzle diameter
2019-03-13 23:36:56 +00:00
Reorder EEPROM items to allow possible future grow for Sheets struct.
2019-07-10 19:03:30 +00:00
#define EEPROM_SHEETS_BASE (EEPROM_CHECK_GCODE - EEPROM_SHEETS_SIZEOF) // Sheets
Fix compile error on windows addresses issue #1965
2019-07-09 15:38:24 +00:00
static Sheets * const EEPROM_Sheets_base = (Sheets*)(EEPROM_SHEETS_BASE);
Add steel sheet profile selector.
2019-06-20 14:40:53 +00:00
IR sensor gen. II disconnected PCB detection
2019-09-15 22:43:37 +00:00
#define EEPROM_FSENSOR_PCB (EEPROM_SHEETS_BASE-1) // uint8
#define EEPROM_FSENSOR_ACTION_NA (EEPROM_FSENSOR_PCB-1) // uint8
Multi-segment pause resume initial
2022-08-15 12:10:17 +00:00
#define EEPROM_UVLO_SAVED_START_POSITION (EEPROM_FSENSOR_ACTION_NA - 4*4) // 4 x float for saved start position for all axes
#define EEPROM_UVLO_FEEDMULTIPLY (EEPROM_UVLO_SAVED_START_POSITION - 2) // uint16_t for feedmultiply
Fix EEPROM conflict.
2019-07-10 16:41:12 +00:00
Merge branch 'MK3' into MK3-PFW-1024
2019-12-14 08:08:52 +00:00
#define EEPROM_BACKLIGHT_LEVEL_HIGH (EEPROM_UVLO_FEEDMULTIPLY-1) // uint8
Backlight overhaul and UI changes
2019-10-17 10:11:32 +00:00
#define EEPROM_BACKLIGHT_LEVEL_LOW (EEPROM_BACKLIGHT_LEVEL_HIGH-1) // uint8
#define EEPROM_BACKLIGHT_MODE (EEPROM_BACKLIGHT_LEVEL_LOW-1) // uint8
Adjustable timeout
2019-10-18 07:32:41 +00:00
#define EEPROM_BACKLIGHT_TIMEOUT (EEPROM_BACKLIGHT_MODE-2) // uint16
Fix EEPROM conflict.
2019-07-10 16:41:12 +00:00
Merge remote-tracking branch 'upstream/MK3' into MK3_LA15
2019-12-18 16:03:54 +00:00
#define EEPROM_UVLO_LA_K (EEPROM_BACKLIGHT_TIMEOUT-4) // float
Fix EEPROM conflict.
2019-07-10 16:41:12 +00:00
ALTFAN override
2020-07-20 16:35:25 +00:00
#define EEPROM_ALTFAN_OVERRIDE (EEPROM_UVLO_LA_K-1) //uint8
Add experimental menu to HW_setup
2020-07-29 08:23:24 +00:00
#define EEPROM_EXPERIMENTAL_VISIBILITY (EEPROM_ALTFAN_OVERRIDE-1) //uint8
Add SuperPINDA support for MK2.5/S - Changed DETECT_SUPERPINDA to SUPERPINDA_SUPPORT as on miniRAMo the thermistor readings below 30°C aren't accurate egnough to determine if SUPERPINDA is connected or not - Add LCD toggle menu Settings -> HW Setup -> SuperPINDA [Yes/No] to overwrite SuperPINDA detection - If EEPROM_PINDA_TEMP_COMPENSTATION is empty = 0xff then detect SuperPINDA by checking thermistor - If EEPROM_PINDA_TEMP_COMPENSTAION is 0 then forec enable for temperature compensation menues and functions - If EEPROM_PINDA_TEMP_COMPENSATION is 1 then force disable for temperature compensation menues and functions
2020-12-07 14:32:19 +00:00
#define EEPROM_PINDA_TEMP_COMPENSATION (EEPROM_EXPERIMENTAL_VISIBILITY-1) //uint8
PRUSA SN in eeprom
2021-01-14 09:52:22 +00:00
#define EEPROM_PRUSA_SN (EEPROM_PINDA_TEMP_COMPENSATION-20) //char[20]
Handle acceleration settings in UVLO/power panic Acceleration settings need to be saved in UVLO, since these are often changed/set during a print. This is especially important for travel and retract acceleration, which is usually set once per-print. Saving and restoring is not 100% correct. We save the current front-end value, which might ahead of the backend when UVLO is triggered. Print acceleration, likely the most significant, should be saved in the block buffer to be accurate. Acceleration needs to be restored after the UVLO Z repositioning is performed, using an M204 command. This is correct, however we don't save the _temporary_ max acceleration limits set via M201, which could be higher than the saved limits (via M500). This could result in lower clamped values compared to the original print. Maximum acceleration/jerk/feedrate limits should _all_ be saved in UVLO in the future.
2021-01-31 23:02:49 +00:00
#define EEPROM_UVLO_ACCELL (EEPROM_PRUSA_SN-4) // float
#define EEPROM_UVLO_RETRACT_ACCELL (EEPROM_UVLO_ACCELL-4) // float
#define EEPROM_UVLO_TRAVEL_ACCELL (EEPROM_UVLO_RETRACT_ACCELL-4) // float
EEPROM_JOB_ID
2021-04-01 17:37:07 +00:00
#define EEPROM_JOB_ID (EEPROM_UVLO_TRAVEL_ACCELL-4) //uint32_t
Scale extruder motor current linearly with speed. (#2813) Scale extruder motor current linearly with speed. 49% less heating when running at low speed and standstill, 4% more torque at maximum extrusion rate (15mm^3/s), 15% more torque in high speed movements (un/retractions). StealthChop mode is used for low speeds (below 900mm/min) spreadCycle is used above. Transition speed is well above maximum extrusion rate of 15mm^3/s (275mm/min) so mode transition is not expected to be visible on printed surface. StealthChop is expected to improve printed surface quality (less artifacts). Warning you can burn extruder motor if it is not the same impedance as original Prusa i3 Extruder stepper motor. There is no current feedback in low speed so lower impedance motor can be burned by over current. Even there is no direct current feedback, there is no risk for original motor thermal runaway, as motor resistance increases with temperature, current decreases. Standstill peak phase current is expected to be 500 mA and linearly increase with speed to 970 mA at 900mm/min where spreadCycle constant current regulation takes over and keeps peak current at 805 mA to maximum speed possible. As motor heating increases with current squared, lowering low speed current from 700mA to 500mA decreases heating 49% in thate mode, where motor spends most of the time. Enable E-motor cool mode in farm mode only (and experimental menu) - the experimental menu is visible AND the EEPROM_ECOOL variable has a value of the universal answer to all problems of the universe - i.e. two conditions must be met at the start of the FW to enable the E-cool mode. If the user enables the experimental menu, sets the E-cool mode and disables the menu afterwards, on the next start of the FW the E-cool mode will be DISABLED. This is still subject to discussion how much obscure (security through obscurity) we'd like this option to have . Additional stuff: * Add serial debug msg to verify if E-cool mode is on * Avoid access to E-cool mode switch on machines without TMC2130 * Do not allow only M907 E in case of E-cool mode+warn the user on the serial line that the command was skipped Co-authored-by: D.R.racer <drracer@drracer.eu>
2021-04-23 14:06:28 +00:00
#define EEPROM_ECOOL_ENABLE (EEPROM_JOB_ID-1) // uint8_t
Report crash also in MK2.5, fix stack_error abuse Rename EEPROM_CRASH_ACKNOWLEDGED to EEPROM_FW_CRASH_FLAG. Use EEPROM_FW_CRASH_FLAG to always set the last crash reason, which simplifies handling between the online/offline variants. Make stack_error safe, by setting the flag and restarting immediately, so that the error can be shown after restart.
2021-06-12 12:41:54 +00:00
#define EEPROM_FW_CRASH_FLAG (EEPROM_ECOOL_ENABLE-1) // uint8_t
Scale extruder motor current linearly with speed. (#2813) Scale extruder motor current linearly with speed. 49% less heating when running at low speed and standstill, 4% more torque at maximum extrusion rate (15mm^3/s), 15% more torque in high speed movements (un/retractions). StealthChop mode is used for low speeds (below 900mm/min) spreadCycle is used above. Transition speed is well above maximum extrusion rate of 15mm^3/s (275mm/min) so mode transition is not expected to be visible on printed surface. StealthChop is expected to improve printed surface quality (less artifacts). Warning you can burn extruder motor if it is not the same impedance as original Prusa i3 Extruder stepper motor. There is no current feedback in low speed so lower impedance motor can be burned by over current. Even there is no direct current feedback, there is no risk for original motor thermal runaway, as motor resistance increases with temperature, current decreases. Standstill peak phase current is expected to be 500 mA and linearly increase with speed to 970 mA at 900mm/min where spreadCycle constant current regulation takes over and keeps peak current at 805 mA to maximum speed possible. As motor heating increases with current squared, lowering low speed current from 700mA to 500mA decreases heating 49% in thate mode, where motor spends most of the time. Enable E-motor cool mode in farm mode only (and experimental menu) - the experimental menu is visible AND the EEPROM_ECOOL variable has a value of the universal answer to all problems of the universe - i.e. two conditions must be met at the start of the FW to enable the E-cool mode. If the user enables the experimental menu, sets the E-cool mode and disables the menu afterwards, on the next start of the FW the E-cool mode will be DISABLED. This is still subject to discussion how much obscure (security through obscurity) we'd like this option to have . Additional stuff: * Add serial debug msg to verify if E-cool mode is on * Avoid access to E-cool mode switch on machines without TMC2130 * Do not allow only M907 E in case of E-cool mode+warn the user on the serial line that the command was skipped Co-authored-by: D.R.racer <drracer@drracer.eu>
2021-04-23 14:06:28 +00:00
Allow to save/restore temperature model settings This currently bypasses the ConfigurationStore, which doesn't fit the malin model nicely. temp_model is using it's own private copy directly. But maybe we should change this in the future.
2022-06-26 11:13:59 +00:00
#define EEPROM_TEMP_MODEL_ENABLE (EEPROM_FW_CRASH_FLAG-1) // uint8_t
#define EEPROM_TEMP_MODEL_P (EEPROM_TEMP_MODEL_ENABLE-4) // float
#define EEPROM_TEMP_MODEL_C (EEPROM_TEMP_MODEL_P-4) // float
#define EEPROM_TEMP_MODEL_R (EEPROM_TEMP_MODEL_C-4*16) // float[16]
#define EEPROM_TEMP_MODEL_Ta_corr (EEPROM_TEMP_MODEL_R-4) // float
#define EEPROM_TEMP_MODEL_W (EEPROM_TEMP_MODEL_Ta_corr-4) // float
#define EEPROM_TEMP_MODEL_E (EEPROM_TEMP_MODEL_W-4) // float
backport: Sync new offsets from MK3
2022-12-28 19:29:28 +00:00
#define EEPROM_FSENSOR_JAM_DETECTION (EEPROM_TEMP_MODEL_E-1) // uint8_t
#define EEPROM_MMU_ENABLED (EEPROM_FSENSOR_JAM_DETECTION-1) // uint8_t
#define EEPROM_TOTAL_TOOLCHANGE_COUNT (EEPROM_MMU_ENABLED-4)
#define EEPROM_HEAT_BED_ON_LOAD_FILAMENT (EEPROM_TOTAL_TOOLCHANGE_COUNT-1) //uint8
Replace calibration state with a new calibration bitmap - Move calibration status/declarations to util.h - Allows to query the status of each step independently without assuming any order - Allows to extend the calibration with new steps transparently
2022-12-23 18:35:00 +00:00
#define EEPROM_CALIBRATION_STATUS_V2 (EEPROM_HEAT_BED_ON_LOAD_FILAMENT-1) //uint8
backport: Sync new offsets from MK3
2022-12-28 19:29:28 +00:00
TM: Allocate new eeprom parameters for PTC handling
2023-01-26 21:08:00 +00:00
#define EEPROM_TEMP_MODEL_U (EEPROM_CALIBRATION_STATUS_V2-4) //float
#define EEPROM_TEMP_MODEL_V (EEPROM_TEMP_MODEL_U-4) //float
#define EEPROM_TEMP_MODEL_D (EEPROM_TEMP_MODEL_V-4) //float
#define EEPROM_TEMP_MODEL_L (EEPROM_TEMP_MODEL_D-2) //uint16_t
TM: future-proofing for incompatible model upgrades Introduce a model version. This is initialized at "1" and doesn't require any upgrade/downgrade checks since it's currently retro-compatible.
2023-02-15 10:40:53 +00:00
#define EEPROM_TEMP_MODEL_VER (EEPROM_TEMP_MODEL_L-1) //uint8_t
TM: Allocate new eeprom parameters for PTC handling
2023-01-26 21:08:00 +00:00
Add compile time check for EEPROM stored varibles size.
2019-06-19 13:09:07 +00:00
//This is supposed to point to last item to allow EEPROM overrun check. Please update when adding new items.
TM: future-proofing for incompatible model upgrades Introduce a model version. This is initialized at "1" and doesn't require any upgrade/downgrade checks since it's currently retro-compatible.
2023-02-15 10:40:53 +00:00
#define EEPROM_LAST_ITEM EEPROM_TEMP_MODEL_VER
PowerPanic & Sound
2018-07-23 18:04:47 +00:00
// !!!!!
// !!!!! this is end of EEPROM section ... all updates MUST BE inserted before this mark !!!!!
// !!!!!
// Currently running firmware, each digit stored as uint16_t.
// The flavor differentiates a dev, alpha, beta, release candidate or a release version.
#define EEPROM_FIRMWARE_VERSION_END (FW_PRUSA3D_MAGIC_LEN+8)
#define EEPROM_FIRMWARE_VERSION_FLAVOR (FW_PRUSA3D_MAGIC_LEN+6)
#define EEPROM_FIRMWARE_VERSION_REVISION (FW_PRUSA3D_MAGIC_LEN+4)
#define EEPROM_FIRMWARE_VERSION_MINOR (FW_PRUSA3D_MAGIC_LEN+2)
#define EEPROM_FIRMWARE_VERSION_MAJOR FW_PRUSA3D_MAGIC_LEN
// Magic string, indicating that the current or the previous firmware running was the Prusa3D firmware.
#define EEPROM_FIRMWARE_PRUSA_MAGIC 0
Scale extruder motor current linearly with speed. (#2813) Scale extruder motor current linearly with speed. 49% less heating when running at low speed and standstill, 4% more torque at maximum extrusion rate (15mm^3/s), 15% more torque in high speed movements (un/retractions). StealthChop mode is used for low speeds (below 900mm/min) spreadCycle is used above. Transition speed is well above maximum extrusion rate of 15mm^3/s (275mm/min) so mode transition is not expected to be visible on printed surface. StealthChop is expected to improve printed surface quality (less artifacts). Warning you can burn extruder motor if it is not the same impedance as original Prusa i3 Extruder stepper motor. There is no current feedback in low speed so lower impedance motor can be burned by over current. Even there is no direct current feedback, there is no risk for original motor thermal runaway, as motor resistance increases with temperature, current decreases. Standstill peak phase current is expected to be 500 mA and linearly increase with speed to 970 mA at 900mm/min where spreadCycle constant current regulation takes over and keeps peak current at 805 mA to maximum speed possible. As motor heating increases with current squared, lowering low speed current from 700mA to 500mA decreases heating 49% in thate mode, where motor spends most of the time. Enable E-motor cool mode in farm mode only (and experimental menu) - the experimental menu is visible AND the EEPROM_ECOOL variable has a value of the universal answer to all problems of the universe - i.e. two conditions must be met at the start of the FW to enable the E-cool mode. If the user enables the experimental menu, sets the E-cool mode and disables the menu afterwards, on the next start of the FW the E-cool mode will be DISABLED. This is still subject to discussion how much obscure (security through obscurity) we'd like this option to have . Additional stuff: * Add serial debug msg to verify if E-cool mode is on * Avoid access to E-cool mode switch on machines without TMC2130 * Do not allow only M907 E in case of E-cool mode+warn the user on the serial line that the command was skipped Co-authored-by: D.R.racer <drracer@drracer.eu>
2021-04-23 14:06:28 +00:00
#define EEPROM_ECOOL_MAGIC_NUMBER 42
PowerPanic & Sound
2018-07-23 18:04:47 +00:00
Rename _EEPROM_writeData to EEPROM_writeData. Rename _EEPROM_readData to EEPROM_readData. Add return value to EEPROM_writeData to detect failure to write. Do not mark data as valid, if write has failed. Remove EEPROM_WRITE_VAR and EEPROM_READ_VAR macros. Make pos input only parameter. Convert EEPROM_OFFSET macro to typed constatant EEPROM_M500_base, it was defined in two places, leave it in one place. Use Config_StoreSettings() instead of erase_eeprom_section(). Compare float with 0xff byte by byte to avoid compiler warning "Dereferencing type punned pointer will break strict aliasing rules."
2018-10-08 18:24:56 +00:00
#ifdef __cplusplus
#include "ConfigurationStore.h"
Add compile time check for EEPROM stored varibles size.
2019-06-19 13:09:07 +00:00
static_assert(EEPROM_FIRMWARE_VERSION_END < 20, "Firmware version EEPROM address conflicts with EEPROM_M500_base");
Fixed C++ bug
2020-12-06 12:27:32 +00:00
static M500_conf * const EEPROM_M500_base = reinterpret_cast<M500_conf*>(20); //offset for storing settings using M500
Add compile time check for EEPROM stored varibles size.
2019-06-19 13:09:07 +00:00
static_assert(((sizeof(M500_conf) + 20) < EEPROM_LAST_ITEM), "M500_conf address space conflicts with previous items.");
Rename _EEPROM_writeData to EEPROM_writeData. Rename _EEPROM_readData to EEPROM_readData. Add return value to EEPROM_writeData to detect failure to write. Do not mark data as valid, if write has failed. Remove EEPROM_WRITE_VAR and EEPROM_READ_VAR macros. Make pos input only parameter. Convert EEPROM_OFFSET macro to typed constatant EEPROM_M500_base, it was defined in two places, leave it in one place. Use Config_StoreSettings() instead of erase_eeprom_section(). Compare float with 0xff byte by byte to avoid compiler warning "Dereferencing type punned pointer will break strict aliasing rules."
2018-10-08 18:24:56 +00:00
#endif
Add always cut experimental / for testing feature.
2019-05-30 18:46:41 +00:00
enum
{
EEPROM_MMU_CUTTER_ENABLED_enabled = 1,
EEPROM_MMU_CUTTER_ENABLED_always = 2,
};
Increase number of configurable steel sheets to 8. Move sheets into sub menu of HW setup.
2019-08-29 15:21:08 +00:00
#ifdef __cplusplus
void eeprom_init();
struct SheetName
{
char c[sizeof(Sheet::name) + 1];
};
Switch to next sheet if currently selected sheet is not initialized. Move next_initialized_sheet() and change_sheet_from_menu() to eeprom.cpp, rename it to eeprom_next_initialized_sheet() and eeprom_switch_to_next_sheet(). Rename default_sheet_name() to eeprom_default_sheet_name().
2019-08-30 10:24:13 +00:00
void eeprom_default_sheet_name(uint8_t index, SheetName &sheetName);
int8_t eeprom_next_initialized_sheet(int8_t sheet);
void eeprom_switch_to_next_sheet();
Backport eeprom functions from 3.13
2023-01-28 17:14:34 +00:00
bool eeprom_is_sheet_initialized(uint8_t sheet_num);
bool eeprom_is_initialized_block(const void *__p, size_t __n);
void eeprom_update_block_P(const void *__src, void *__dst, size_t __n);
void eeprom_toggle(uint8_t *__p);
void eeprom_increment_byte(uint8_t *__p);
void eeprom_increment_word(uint16_t *__p);
void eeprom_increment_dword(uint32_t *__p);
void eeprom_add_byte(uint8_t *__p, uint8_t add);
void eeprom_add_word(uint16_t *__p, uint16_t add);
void eeprom_add_dword(uint32_t *__p, uint32_t add);
uint8_t eeprom_init_default_byte(uint8_t *__p, uint8_t def);
uint16_t eeprom_init_default_word(uint16_t *__p, uint16_t def);
uint32_t eeprom_init_default_dword(uint32_t *__p, uint32_t def);
void eeprom_init_default_float(float *__p, float def);
void eeprom_init_default_block(void *__p, size_t __n, const void *def);
void eeprom_init_default_block_P(void *__p, size_t __n, const void *def);
Increase number of configurable steel sheets to 8. Move sheets into sub menu of HW setup.
2019-08-29 15:21:08 +00:00
#endif
PowerPanic & Sound
2018-07-23 18:04:47 +00:00
#endif // EEPROM_H
Reference in New Issue Copy Permalink