3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
5,204 Commits 3 Branches 78 Tags 40 MiB
main
Commit Graph

5204 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
bubnikv
5c56e472fe Show the Toshiba FlashAir IP address in the menu. 2016-07-22 10:31:30 +02:00
bubnikv
2e66fdf84a Merge branch 'MK2' of https://github.com/Prusa3D/Prusa-Firmware into MK2 2016-07-21 10:49:48 +02:00
bubnikv
562c089e17 Initial implementation of the Toshiba FlashAir support: 
Get the status of the Toshiba FlashAir, namely its IP address.
The IP address is currently reported through an M46, but this
is subject to change and the IP address shall be shown on the display.
 2016-07-21 10:48:08 +02:00
akukan
c8c92f8ae5 PLA preheat settings for MK2 set to 215/55 2016-07-20 16:30:44 +02:00
akukan
e9910a9078 Print farm confirmation 2016-07-20 16:05:20 +02:00
akukan
1b2676baac Farm monitoring 2016-07-20 15:02:52 +02:00
bubnikv
ea6a948c6b Removed the dual carriage code for readibility. 
Removed support for the slow Toshiba stepper drivers.
 2016-07-19 10:57:18 +02:00
bubnikv
2e6e4542c9 Undo babystepping in Z before G28 / G80, if applied already. 
Update babystepsTodo atomically (disable / enable interrupts).
Disable debugging outputs on the serial line from the X/Y calibration code.
OctoPrint fix - fixes a hangup after G28: Link the G28->G80 G codes
by calling the G80 code directly without pushing it into the command buffer.
SD card driver patch to support the Toshiba FlashAir SD/WiFi card.
 2016-07-18 17:28:54 +02:00
bubnikv
3c21438392 In addition to the firmware version number, store the "PRUSA3D" 
magic at the beginning of the EEPROM,
so at the upgrade the firmware would know, if the previous firmware
was a Prusa3D firmware.
 2016-07-08 09:49:15 +02:00
bubnikv
d825c5ffac Write the current firmware version into first 8 bytes of the EEPROM, 
so the firmware will have a chance to find out, that it has been
upgraded.
 2016-07-07 22:01:51 +02:00
bubnikv
d4e332112b Reset babystepping value on startup, if the Z live adjust is off. 
This is necessary so the Z axis will not go havoc when the Z live adjust
is enabled.
 2016-07-07 21:34:13 +02:00
bubnikv
591e81777a "Printer has not been calibrated yet, calibrate Z" message on startup, 
if EEPROM_BABYSTEP_Z_SET equals 0x0ff.
 2016-07-07 21:23:32 +02:00
bubnikv
208976f397 Ignore extended ASCII characters. These characters have no meaning in the G-code apart from the file names 
and Marlin does not support such file names anyway.
Serial characters with a highest bit set to 1 are generated when the USB cable is unplugged, leading
to a hang-up of the print process from an SD card.
 2016-07-07 20:31:11 +02:00
bubnikv
0b372bfc94 Added a new feature to the "M115" code: 
"M115 Umajor.minor.revision-flavor" will trigger a dialog
on the display if the "upgrade" firmware version number is higher
than the current version number.
 2016-07-07 20:26:59 +02:00
bubnikv
d7c75f2060 Updated soft end stops with the skew calibration active. 
Updated changes between the corrected / uncorrected XY axes.
 2016-07-07 11:51:24 +02:00
bubnikv
a88c0a30e7 Fixed a non-C++ implementation of the PRUSA specific G-Codes. 
Yet another improvements of the bed skew calibration.
 2016-07-06 16:12:04 +02:00
bubnikv
1394e7efc6 Skew calibration: Yet another improvement of the search algorithm 
of the front row induction sensor targets.
Fixes of some movements behind the end stops.
 2016-07-06 09:34:42 +02:00
bubnikv
58b2aa9fb8 Improvement of the bed skew calibration. 2016-07-04 19:00:42 +02:00
bubnikv
0389b23514 Rewrote the fitting routine of the induction sensor points to the measured points 
from Linear Least Squares to Nonlinear Least Squares to maintain unity length of machine axes.
Improved the scanning of the 1st row of the induction points.
 2016-07-01 09:13:15 +02:00
bubnikv
677c13fc9a Improved the bed auto calibration at the Y=0 edge of the bed. 
Fixed problems with step motors being disabled after inactivity.
 2016-06-24 15:44:31 +02:00
bubnikv
80971237b8 Polished the bed skew and shift calibration. 2016-06-23 19:08:45 +02:00
bubnikv
c24f3369d7 Fixed a bug in babystepping: The babystep value will be written to EEPROM 
at the end of the menu only.
Provided a general method for a menu function to detect exiting by a timeout.
When exiting, the menu function is called with a global variable menuExiting set.
Some errorneously removed functions were reverted.
 2016-06-23 11:15:47 +02:00
bubnikv
78ebd522b6 Removed support for DELTA, SCARA and BARICUDA. 
Implemented bed skew calibration by matching a precise physical model
to the measured data using the least squares method.
Rewrote handling of the command buffer to preserve memory
and allow pushing the commands to the front of the queue.
 2016-06-23 08:46:15 +02:00
bubnikv
08bf6acf1b Fixed ".." label when leaving a subdirectory. 
Made the hidden and system files invisible when browsing the SD card.
 2016-06-20 13:46:37 +02:00
bubnikv
d9da3c4c7f Bugfix of the "Move Z carriages up" step. 2016-06-16 15:52:58 +02:00
bubnikv
6cff4b92ff Automatic bed calibration by searching the 3x3 point matrix. 
Fixed a problem with low RAM by re-vamping the langtool.
 2016-06-16 14:29:04 +02:00
michalprusa
e115c5145f MK2 Config files and hex output added 2016-05-31 14:36:31 +02:00
michalprusa
a4a80b3eb7 MK2 Firmware release. 2016-05-31 14:08:04 +02:00
michalprusa
7361f620d3 Extrude mintemp lowered for wax filaments support 2016-05-01 15:04:44 +02:00
michalprusa
9b8d663526 Better live adjust Z interface 2016-05-01 13:56:55 +02:00
michalprusa
d1df17a722 Tweaked mesh positions 2016-04-28 17:00:20 +02:00
michalprusa
7bfe91483d Calibration process added 2016-04-28 14:50:25 +02:00
michalprusa
1ce1088d6f Bed PID added and minor tweaks 2016-04-19 11:32:22 +02:00
michalprusa
d7417e1dd3 Mesh Bed Leveling rewritten, upcaling of tiles, better bed finding method and minor other tweaks. 2016-04-01 16:48:48 +02:00
michalprusa
4263792793 Planning move in mesh rewritten. 2016-03-25 15:56:51 +01:00
michalprusa
7f9e947954 Added debug output 2016-03-25 14:53:55 +01:00
michalprusa
f98cf1b44b Added automatic mesh bed leveling feature 2016-03-12 17:14:11 +01:00
michalprusa
657f339d95 Development branch version mark added 2016-03-12 07:07:22 +01:00
michalprusa
533c3e4e1a Language file generator tweaked 
Now checking if every language has defined all strings!
 2016-03-10 19:15:30 +01:00
michalprusa
8ff414d408 Removed sublime project files 2016-03-10 18:55:08 +01:00
michalprusa
e67d7ed4e3 Fixed missing string in polish language 2016-03-09 17:42:50 +01:00
michalprusa
95dd729904 Compiled output 2.2.4 version 2016-03-08 21:12:24 +01:00
michalprusa
37d3e4278d Added languages and minor tweeks 
Added ES,IT and PL languages. Modified first run procedure to get FW
working on printers without LCD
 2016-03-08 20:34:39 +01:00
michalprusa
4ce950c994 Minor tweeks 
Magic constants moved to one place, fixed gcode for reseting Live
adjusting Z
 2016-03-08 16:24:50 +01:00
michalprusa
feb82d42eb M119 report fixed and added new gcode 
Fixed reporting enstop status and added PRUSA LiveZ to reset live Z
adjusting
 2016-02-25 12:27:08 +01:00
michalprusa
12cce64f90 Variants name changed for better readability and match command reply 2016-02-21 18:12:32 +01:00
Josef Prusa
f8c65e39ae Reorginized the repository and added license 2016-02-21 15:02:31 +01:00
prusa3d-bb
9c2dc0bb42 Version 2.2.3 live Language setting, Language reset when holding knob during startup, revision names redesigned, minor tweeks and cleanup 2016-02-19 17:54:24 +01:00
prusa3d-bb
a0e8a18004 Fixed temperature range when setting from LCD 2016-02-18 13:01:02 +01:00
prusa3d-bb
0e2a987d8c Increased maxtemp to make 40W heaters acceptable 2016-02-18 12:48:28 +01:00