3d-gussner
28aec049a2
Fix Typo in MSG_FIL_FAILED
2021-04-23 09:41:12 +02:00
3d-gussner
ff9185d1bb
Readded >Cancel as the > has some meaning. Sadly the previously 10bytes more free space are gone again
2021-04-23 08:50:50 +02:00
3d-gussner
e18d688b64
Fix merge issues
2021-04-22 20:48:26 +02:00
3d-gussner
681bc560c9
Merge remote-tracking branch 'upstream/MK3_3.10.0' into PFW-1189
2021-04-22 20:43:54 +02:00
DRracer
00ce16ee55
Merge pull request #3121 from wavexx/reduce_m600_min_height
...
Revert/cleanup mininum extruder height during M600
2021-04-22 11:43:18 +02:00
Yuri D'Elia
8d04316497
Revert/cleanup mininum extruder height during M600
...
This change restores the minimum extruder height for filament purge
during M600 from the current 50mm back to 27mm from FW 3.9.
We do this by introducing a new option for unload_filament() to indicate
that the unload is part of an automatic swap, and in such cases avoid
raising more than absolutely necessary (this will _also_ come in handy
to avoid the extra purge in PR #2318 during M600).
A new define MIN_Z_FOR_SWAP is introduced for this purpose.
MIN_Z_FOR_UNLOAD is still used for manual lcd unload and for M702 and
hasn't been changed.
2021-04-21 19:07:58 +02:00
Yuri D'Elia
bc355674d9
Fix partial redraw during filament autoload
...
If the printer was already being pre-heated but didn't reach the target
temperature yet and a new filament is being inserted, the LCD used to
display a "Preheating to load" message to block the loading until the
extruder is hot.
This message is currently missing, and the ">Cancel" option doesn't
display immediately either, depending on the extruder height.
This PR fixes this behavior, which was broken during an earlier update.
We now force-update LCD updates during the first (and _only_) time the
screen is setup, and push all messages _before_ the carriage is
eventually raised, so that ">Cancel" is shown immediately as well.
2021-04-21 16:56:16 +02:00
Alex Voinea
9454f9d8ec
Rename w25x20cl to xflash
2021-04-06 10:16:47 +02:00
3d-gussner
3b431bcbc1
Fix output "Y distance from min" by removing ":" so translations can use 20 chars
2021-03-31 08:54:16 +02:00
3d-gussner
d864a5cfdb
Define #MSG_PRINTER_IP c=18
2021-03-31 08:46:17 +02:00
3d-gussner
9922774fa7
Cleanup some comments ////c=
2021-03-31 08:11:19 +02:00
3d-gussner
8e74cbce58
Remove r=1 and some minor fixes
2021-03-31 08:07:42 +02:00
3d-gussner
fb691b44b4
Update #MSG_INFO_SENSORS c=18
2021-03-31 07:51:22 +02:00
3d-gussner
3fb90be46f
Define #MSG_SELECT c=18
2021-03-31 07:50:18 +02:00
3d-gussner
9a0e67c1d7
Define #MSG_RENAME c=18
2021-03-31 07:43:48 +02:00
3d-gussner
cdfc40fb62
Define #MSG_MODE_CHANGE_IN_PROGRESS c=20 r=3
2021-03-31 07:38:41 +02:00
3d-gussner
268d4020cf
Define #MSG_FINDA c=5 and update #MSG_PINDA c=5
2021-03-31 07:32:43 +02:00
3d-gussner
c0b8eef6cd
Define #MSG_FALSE_TRIGGERING c=20
2021-03-31 07:29:42 +02:00
3d-gussner
1ca443f1f4
Define #MSG_CHECKS c=18
2021-03-31 07:28:18 +02:00
3d-gussner
5e049283be
Define #MSG_UNKNOWN c=13
2021-03-31 07:24:41 +02:00
3d-gussner
982153fee1
Define and update #MSG_PRINT_TIME c=19, #MSG_FILAMENT_USED c=19, #MSG_TOTAL_FILAMENT c=19, #MSG_TOTAL_PRINT_TIME c=19
2021-03-31 07:16:36 +02:00
3d-gussner
7a88ce89e4
Update MSG_TEMPERATURE c=18
2021-03-31 07:11:01 +02:00
3d-gussner
c0df79d39a
Define #MSG_SELECT_TEMP_MATCHES_MATERIAL c=20 r=4
2021-03-31 07:10:03 +02:00
3d-gussner
7268f6a824
Define #MSG_SELECT_FILAMENT c=20
2021-03-31 07:08:09 +02:00
3d-gussner
2e43234d3f
Update #MSG_SUPPORT c=18
2021-03-31 07:06:46 +02:00
3d-gussner
ba38262109
Update #MSG_STATISTICS c=18
2021-03-31 07:05:28 +02:00
3d-gussner
960ebac02d
Update #MSG_SPEED c=15
2021-03-31 07:04:47 +02:00
3d-gussner
acbdc2ac8d
Define #MSG_RUNOUTS c=7
2021-03-31 06:59:16 +02:00
3d-gussner
09f4850a8a
Define #MSG_SLIGHT_SKEW c=13, #MSG_SEVERE_SKEW c=13
2021-03-31 06:53:04 +02:00
3d-gussner
4749dd1750
Define #MSG_CHECK_IR_CONNECTION c=20 r=4
2021-03-31 06:46:43 +02:00
3d-gussner
bd8ab39b39
Define #MSG_UNLOAD_FILAMENT_REPEAT c=20 r=4
2021-03-31 06:45:33 +02:00
3d-gussner
5280a89fba
Define #MSG_MMU_INSERT_FILAMENT_FIRST_TUBE c=20 r=6
2021-03-31 06:43:21 +02:00
3d-gussner
4f394c8c5a
Update #MSG_TUNE c=18, #MSG_PREHEAT c=18
2021-03-31 06:38:50 +02:00
3d-gussner
fbecae1707
Update MSG_PREHEAT c=18
2021-03-31 06:38:06 +02:00
3d-gussner
ac810bf03a
Define #MSG_REMOVE_SHIPPING_HELPERS c=20 r=3
2021-03-31 06:36:28 +02:00
3d-gussner
00b100bf26
Define #MSG_NOZZLE_FAN c=10, #MSG_PRINT_FAN c=10
2021-03-31 06:30:00 +02:00
3d-gussner
baf231b0f1
Update MSG_NO_CARD c=18
2021-03-31 06:23:18 +02:00
3d-gussner
1c09e8411d
Define #MSG_PINDA c=6 and remove duplicate saved 8 bytes
2021-03-30 19:30:26 +02:00
3d-gussner
6a266d497b
Define #MSG_REMOVE_TEST_PRINT c=20 r=4
2021-03-30 19:19:43 +02:00
3d-gussner
5fcc731be1
Define #MSG_INSERT_FIL c=20 r=6
2021-03-30 19:17:48 +02:00
3d-gussner
243fa68745
Define #MSG_LIN_CORRECTION c=18
2021-03-30 19:16:11 +02:00
3d-gussner
44f7be134d
Define #MSG_FS_VERIFIED c=20 r=3
2021-03-30 19:13:31 +02:00
3d-gussner
bcdaecb46d
Define #MSG_TO_LOAD_FIL c=20, #MSG_TO_UNLOAD_FIL c=20, #MSG_PRESS_KNOB c=20
2021-03-30 19:10:56 +02:00
3d-gussner
de9697b913
Define #MSG_PREHEATING_TO_LOAD/UNLOAD/CUT/EJECT c=20
2021-03-30 19:06:46 +02:00
3d-gussner
e9750a7312
Update #MSG_FIL_FAILD c=20 r=5
2021-03-30 18:52:58 +02:00
3d-gussner
4a5d7bc6b7
Define #MSG_Y_DIST_FROM_MIN c=20
2021-03-30 18:51:04 +02:00
3d-gussner
7f3fe6740b
Update #MSG_NO_MOVE c=20
2021-03-30 18:46:56 +02:00
3d-gussner
1a1a1d88a7
Update MSG_MOVE_X/Y/Z c=18
2021-03-30 18:13:49 +02:00
3d-gussner
c1f22a5239
Update #MSG_MOVE_AXIS c=18
2021-03-30 18:12:03 +02:00
3d-gussner
99893d5066
Define #MSG_MMU_CONNECTED c=18
2021-03-30 18:11:22 +02:00
3d-gussner
4d9dffb042
Define #MSG_MEASURED_SKEW c=13
2021-03-30 18:06:43 +02:00
3d-gussner
afb7c82e26
Update #MSG_LOAD_TO_NOZZLE c=18
2021-03-30 18:00:20 +02:00
3d-gussner
2408bc9f2e
Update MSG_LOADING_COLOR c=20
2021-03-30 17:58:51 +02:00
3d-gussner
c4f80642b3
Update #MSG_MAIN c=18
2021-03-30 09:52:52 +02:00
3d-gussner
6900c206cd
Define #MSG_SEL_PREHEAT_TEMP c=20 r=6
2021-03-30 09:36:32 +02:00
3d-gussner
12dc48ff1a
Update #MSG_BELTTEST c=18
2021-03-30 09:34:41 +02:00
3d-gussner
b697117654
Update #MSG_SELFTEST c=18
2021-03-30 09:33:49 +02:00
3d-gussner
9bc702ae0a
Update #MSG_SELFTEST_OK c=20
2021-03-30 09:32:27 +02:00
3d-gussner
00fedbb08a
Update MSG_LANGUAGE_SELECT c=18
2021-03-30 09:30:04 +02:00
3d-gussner
164226c739
Define #MSG_RIGHT c=10
2021-03-30 09:29:07 +02:00
3d-gussner
2daf1d9114
Define #MSG_LEFT c=10
2021-03-30 09:26:50 +02:00
3d-gussner
169f8983b6
Define #MSG_ADDITIONAL_SHEETS c=20 r=9
2021-03-30 09:23:35 +02:00
3d-gussner
0139bb5a5e
Update #MSG_CHANGE_SUCCESS c=20
2021-03-30 09:20:57 +02:00
3d-gussner
280a3c4d3a
Update #MSG_PRUSA3D_HOWTO c=18
2021-03-30 09:16:14 +02:00
3d-gussner
12bd2f1a09
Update #MSG_PRUSA3D c=18
2021-03-30 09:15:21 +02:00
3d-gussner
4e4fb7a59f
Update #MSG_PRUSA3D_FORUM c=18
2021-03-30 09:14:20 +02:00
3d-gussner
10c586b577
Update #MSG_FLOW c=15
2021-03-30 09:13:09 +02:00
3d-gussner
7a99f63ffd
Define #MSG_FAIL_STATS c=18
2021-03-30 09:06:59 +02:00
3d-gussner
d427563e2b
Define #MSG_MMU_FAIL_STATS c=18
2021-03-30 09:05:18 +02:00
3d-gussner
b6031c02a8
Update #MSG_DISABLE_STEPPERS c=18
2021-03-30 08:59:27 +02:00
3d-gussner
411caddc55
Define #MSG_CHOOSE_FIL_1ST_LAYERCAL c=20 r=7
2021-03-30 08:14:46 +02:00
3d-gussner
2d2dc23e81
Define #MSG_CALIBRATING_HOME c=20
2021-03-30 08:12:20 +02:00
3d-gussner
c8af50d344
Define #MSG_COPY_SEL_LANG c=20 r=3
2021-03-30 08:09:08 +02:00
3d-gussner
5f9b66a23a
Update #MSG_NOT_COLOR c=19
2021-03-30 08:04:39 +02:00
3d-gussner
02ff05639b
Define MSG_CHECKING_FILE c=17
2021-03-30 08:01:26 +02:00
3d-gussner
f2298b1a46
Update #MSG_SD_REMOVED c=20
2021-03-30 07:57:42 +02:00
3d-gussner
3733c42d38
Update #MSG_HOMEYZ_DONE c=20
2021-03-30 07:54:11 +02:00
3d-gussner
fa0382fd3e
Update #MSG_CALIBRATE_BED c=18
2021-03-30 07:50:54 +02:00
3d-gussner
7c906dd0b1
Update #MSG_BED_CORRECTION_MENU c=18
2021-03-30 07:44:16 +02:00
3d-gussner
ba0f2b2501
Update MSG_LOOSE_PULLEY c=20
2021-03-20 07:11:41 +01:00
3d-gussner
3fcc81ebdb
Update MSG_SELFTEST_ENDSTOP c=16
2021-03-20 07:11:07 +01:00
3d-gussner
17df4e1c8d
Update MSG_SELFTEST_ENDSTOPS c=20
2021-03-20 07:10:09 +01:00
3d-gussner
4a6c53daf8
Update MSG_SELFTEST_PLEASECHECK c=20
2021-03-20 07:09:33 +01:00
3d-gussner
b3d3feef4d
Update MSG_SELFTEST_ERROR c=20
2021-03-20 07:08:48 +01:00
3d-gussner
5d167ce813
Update MSG_SELFTEST_NOTCONNECTED c=20
2021-03-20 07:08:20 +01:00
3d-gussner
625604d704
Update MSG_SELFTEST_HEATERTHERMISTOR c=20
2021-03-20 07:07:14 +01:00
3d-gussner
b86ad11b68
Update MSG_SELFTEST_BEDHEATER c=20
2021-03-20 07:06:37 +01:00
3d-gussner
b3b062e4ba
Update MSG_SELFTEST_SWAPPED c=16
2021-03-20 07:05:47 +01:00
3d-gussner
b6684f6114
Update MSG_SELFTEST_AXIS c=16
2021-03-20 07:05:03 +01:00
3d-gussner
bc9f6b6ae6
Update MSG_SELFTEST_AXIS_LENGTH c=20
2021-03-20 07:03:47 +01:00
3d-gussner
fe1b4e50be
Update MSG_AMBIENT c=14
2021-03-20 06:59:54 +01:00
3d-gussner
178fe36dc7
Create MSG_CANCEL c=9
...
Delete ">Cancel"
Samed 10 bytes
Updated MSG_MEASURED_OFFSET c=20
2021-03-20 06:30:26 +01:00
3d-gussner
1c965cd988
Update MSG_MEASURED_OFFSET c=20
2021-03-20 06:18:41 +01:00
3d-gussner
92acac453f
Update MSG_MMU_POWER_FAILS c=15
2021-03-20 06:16:11 +01:00
3d-gussner
b806c017cb
Update MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=6
...
as Polish translation is longer
2021-03-19 18:47:58 +01:00
3d-gussner
542ff58529
Update MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=6
...
as Polish translation is longer
2021-03-19 18:47:09 +01:00
3d-gussner
147fddd060
Update MSG_CALIBRATE_BED_RESET c=18
2021-03-19 18:41:01 +01:00
3d-gussner
41022d7d60
Update "Choose a filament for the First Layer Calibration and select it in the on-screen menu."
...
as French translation is longer
2021-03-19 18:07:04 +01:00
3d-gussner
813aabab56
Update "Select nozzle preheat temperature which matches your material." c=20 r=6
...
as Spanish translation is longer
2021-03-19 18:03:06 +01:00
3d-gussner
d52a7326be
Update "Please insert filament into the extruder, then press the knob to load it." c=20 r=6
...
as German translation is longer
2021-03-19 17:55:03 +01:00
