Alex Voinea
380377db0f
Add static assert
2022-02-10 09:47:37 +01:00
Guðni Már Gilbert
9bf45773f9
Merge remote-tracking branch 'upstream/MK3' into rebase-testing-ground-v2
2022-01-30 11:43:16 +00:00
Guðni Már Gilbert
c705d4aa10
Change set_z() parameters to uin8_t
...
Saves 24 bytes of flash
2022-01-30 11:39:28 +00:00
Guðni Már Gilbert
52aa5a5f00
Use inlined function set_destination_to_current() in more places
...
Saves 70 bytes of flash memory
2022-01-30 11:39:23 +00:00
Guðni Már Gilbert
b716c208d7
Various optimisation to change int to uint8_t
...
This commit saves 174 bytes of flash memory
2021-08-03 22:42:01 +00:00
Guðni Már Gilbert
d853c19a21
Use fabs() instead of abs() when using floats
...
This saves 514 bytes of flash memory
2021-07-20 08:16:18 +02:00
3d-gussner
686054b95e
Changed x of 4 and y of 9 to x/4 and y/4
...
Added `Iteration` translation
2021-04-27 20:22:28 +02:00
3d-gussner
b8ae08fd3d
Update x of 4 and x of 9 messages so longer text can be used.
2021-04-27 07:18:52 +02:00
espr14
99206884b5
Calibration: detect biased PINDA and retry calibration
...
PFW-1223
2021-03-12 05:04:49 +01:00
Yuri D'Elia
c241adec5f
Ensure babystep_apply|undo always uses the planner
...
The code around these calls _requires_ that the steps are immediately
processed and/or added to the subsequent planner moves.
The only part that doesn't care about immediate insertion is the
direct user-insertion though the lcd encoder.
2021-02-25 16:44:16 +01:00
Yuri D'Elia
e010ca8ceb
Fix conflicting extern/inline declarations
...
The functions find_bed_induction_sensor_point_* have conflicting
extern and inline declarations.
These are used outside of the compilation unit only, and thus there's no
point in defining them inline.
This causes a compilation failure at O1 and above, which is strangely
avoided at Os.
2021-02-10 14:50:13 +01:00
espr14
d7507649d8
Remove degree char
2021-01-12 00:28:46 +01:00
espr14
333526f65d
Single skew output
2021-01-11 23:14:12 +01:00
espr14
e6e44fe188
Convert to degrees
2021-01-11 23:13:08 +01:00
espr14
b8443b00ad
Reverse reverse
2021-01-11 22:18:50 +01:00
espr14
09892bec52
Reverse
2021-01-11 18:46:56 +01:00
espr14
211e5f5f37
Define DBG output
2021-01-11 17:31:26 +01:00
espr14
904a23b69e
Report calibration results
2021-01-11 17:02:41 +01:00
espr14
2e40a27460
Alignment, comments
2021-01-11 15:40:12 +01:00
espr14
1610c96fc4
Fix and report circle divergence
2020-12-21 18:05:52 +01:00
DRracer
eb44ee0f57
Code size optimization: 2KB down ( #2687 )
...
* Combine repeated calls into functions with much less parameters -> 2KB
down.
* Save some bytes by removing unnecessary 1-character strings: "x" -> 'x'
used in SERIAL_xxx printing macros.
This is also saves some CPU cycles
* Fix compilation for MK25S and MK3
* Copy surrounding indentation
* Fix compilation for a rare HW setup
* rename mesh_planXX_buffer_line back to mesh_plan_buffer_line
* Remove active_extruder from remaining plan_buffer_line_destinationXYZE
calls and one more fix of indentation
2020-06-01 17:51:28 +02:00
leptun
8c2902a660
Revert "Mesh bed leveling testing"
...
This reverts commit 28e812d91f
2020-01-29 23:07:53 +02:00
leptun
28e812d91f
Mesh bed leveling testing
2019-11-13 14:32:33 +02:00
leptun
7650e2b60c
Handle disable_heater()
2019-10-06 12:43:03 +03:00
leptun
570b5989f4
Disable bed PWM while probing bed.
2019-10-06 10:50:11 +03:00
DRracer
a7c2aec04c
Code size reduced by almost 5KB
2019-08-21 09:59:51 +02:00
Marek Bel
4a16fe6902
Save z_offset, bed_temp and pinda_temp with sheet calibration.
2019-06-26 14:10:12 +02:00
Ondrej Tuma
b7fe43bf68
Deleted bad cols/rows definitions for translation.
2019-05-07 12:52:23 +02:00
PavelSindler
96a111119b
document
2019-03-28 14:52:50 +01:00
PavelSindler
8f69d5a501
document
2019-03-28 14:48:35 +01:00
PavelSindler
e259967991
remove / comment debug code
2019-03-27 20:41:45 +01:00
PavelSindler
5863297538
if deviation between current Z-probe and avg, value > 50um, enlarge Z-probe movements and repeat measurement
2019-03-27 20:25:00 +01:00
PavelSindler
a9ce38df71
Function for decision if we have valid Z-calibration data in eeprom fixed, mesh bed leveling: possible crash fix, temporaty debug info on serial line.
2019-03-26 17:14:05 +01:00
PavelSindler
ef198856a4
increase relative movement in Z to work better with higher hysteresis PINDAs
2019-03-14 14:10:52 +01:00
PavelSindler
9e0e4198c5
Mesh by 3d-gussner, fixed difference between mbl points coordinates and coordinates used in planner for corrections, mbl settings menu update
2019-03-14 01:52:44 +01:00
PavelSindler
6c70d59810
mbl settings initialization fix
2019-03-13 15:05:10 +01:00
PavelSindler
0aa21c362e
compile error fix
2019-03-11 23:37:30 +01:00
PavelSindler
9a83925a97
fixed bug in counting approximate Z coordinate
2019-03-11 23:13:55 +01:00
PavelSindler
141b78c048
number of Z-probes defualt value changed from 4 to 3, mmu stealth mode switch in settings menu
2019-03-10 16:03:46 +01:00
PavelSindler
f293d61d3d
faster Z probe: move Z 150um relatively to last measurement. If PINDA is triggered at the beginning of measurement, move Z 500um higher and repeat measurement
2019-03-08 18:52:14 +01:00
PavelSindler
6a864ffbab
G80 parameters configurable via settings menu
2019-03-08 15:43:37 +01:00
PavelSindler
7c187541e1
function for valid points determination improved; simple Z-coordinate estimation; measure all points and use inaccurate Z-coordinate in case that we don't have enought information for counting Z-coordinate estimation
2019-03-05 22:36:30 +01:00
PavelSindler
d9e93e8a77
measurements points moved 10mm to the left; measure only chosen points (e.g. not points affected by magnets proximity)
2019-03-05 20:40:08 +01:00
PavelSindler
17f095b957
shorter Z movements (makes calibration faster)
2019-03-04 20:32:56 +01:00
PavelSindler
e27fdafcec
menu switch - initial
2019-02-28 19:42:09 +01:00
Laurentiu
51827c578f
MESH_MEAS_NUM_X_POINTS constant correction to MESH_MEAS_NUM_Y_POINTS
2019-02-22 15:05:06 +02:00
Laurentiu
62875f2e95
MESH_MEAS_NUM_X_POINTS constant correction to MESH_MEAS_NUM_Y_POINTS
2019-02-22 14:35:48 +02:00
Laurentiu
4835b9b220
7x7 points mesh bed leveling
2019-02-14 10:57:58 +02:00
Robert Pelnar
9a68501039
MK2 variants compilable
2018-11-06 14:17:43 +01:00
Marek Bel
1585dc66b0
Merge remote-tracking branch 'prusa3d/MK3_dev' into simplify_EEPROM_M500
...
Known limitation: Unable to compile.
2018-10-08 15:58:49 +02:00
