3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
4,583 Commits 3 Branches 78 Tags 40 MiB
9454f9d8ec
Commit Graph

4583 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Yuri D'Elia
b4f5633bde Enable "Move axis" and "Disable steppers" only when idle 
Move axis queues movements, which disrupts a normal print, homing (when
XY is combined) or MBL.

Likewise, "Disable steppers" only makes sense when the printer is fully
idle.

Only allow such actions when the printer is not active and/or in the
paused state.
 2021-02-25 17:33:59 +01:00
Yuri D'Elia
14a1a93bc8 Include probing/MBL in the PRINTER_ACTIVE check 
This prevents to perform disruptive actions during homing or between MBL
probes, which would result in a failure.
 2021-02-25 17:33:59 +01:00
Yuri D'Elia
28e9c814fc Remove code duplication for babystep insertion 2021-02-25 16:44:16 +01:00
Yuri D'Elia
019c818c05 Insert babysteps using CRITICAL_SECTION instead of cli/sei 2021-02-25 16:44:16 +01:00
Yuri D'Elia
f5e419530b Inhibit LiveZ from the settings menu during mesh bed leveling 2021-02-25 16:44:16 +01:00
Yuri D'Elia
ff4e53d2d1 Prevent babysteps in more unsafe situations through homing_flag 
Further restrict babystep insertion when the lcd_update is enabled by
toggling homing_flag when probing Z (where Z shouldn't be touched
anyway as it would disrupt the measurement)

Also reset the encoder value during mesh leveling.
 2021-02-25 16:44:16 +01:00
Yuri D'Elia
c241adec5f Ensure babystep_apply|undo always uses the planner 
The code around these calls _requires_ that the steps are immediately
processed and/or added to the subsequent planner moves.

The only part that doesn't care about immediate insertion is the
direct user-insertion though the lcd encoder.
 2021-02-25 16:44:16 +01:00
DRracer
ffae16bf95
Merge pull request #3033 from DRracer/wdr-inline 
Make watchdogReset() force_inline
 2021-02-25 13:53:34 +01:00
3d-gussner
bc2b2a4f76 Update workflow 2021-02-25 12:27:30 +01:00
3d-gussner
4a241f2a9b Use new PF-build.sh parameter -c 1 2021-02-25 10:48:55 +01:00
3d-gussner
afa84b15bd Translate new messages 
Check that amount of messages are equal `lang_en.txt` vs. `lang_en_nl.txt`
 2021-02-25 10:40:33 +01:00
3d-gussner
d9b820690e Merge remote-tracking branch 'upstream/MK3' into MK3_Dutch 
fix merge issues
 2021-02-25 09:56:23 +01:00
DRracer
7b22895f23
Merge pull request #3032 from DRracer/service-prep2 
Make a special welcome message for Shipping/Service prep.
 2021-02-25 08:51:47 +01:00
DRracer
9ed713ab13
Merge pull request #3015 from 3d-gussner/PFW-1174 
PFW-1174: Add pause/resume for USB/host prints via LCD menu
 2021-02-25 08:50:41 +01:00
DRracer
0eb8303cae
Merge pull request #2575 from 3d-gussner/MK3_Fix_LCD_stats 
🐛 Fix LCD output for unit16 values
 2021-02-24 09:25:24 +01:00
3d-gussner
657767f073 Merge branch 'MK3' into MK3_Fix_LCD_stats 
Fix merge issue
 2021-02-24 09:01:30 +01:00
DRracer
526e7f636d
Merge pull request #3040 from 3d-gussner/PFW-969 
PFW-969 Fix Sensor info screen is blocking the function of filament IR sensor
 2021-02-23 16:17:44 +01:00
D.R.racer
03bd9276e2 Remove unrelated translations from master lang_en.txt as well 2021-02-23 15:33:15 +01:00
D.R.racer
fbca8cbe28 Remove unrelated (but still missing) translations 
This needs to be fixed in 3.10 final. Rumors say some of the translation
scripts even fail on a message containing both % and a backslash
 2021-02-23 15:31:36 +01:00
3d-gussner
076613fd97 Show Fil. sensor in Support::Sensor info only if IR Sensor detected 2021-02-23 15:20:08 +01:00
3d-gussner
08a6a4b25e Enable Filament sensor action during print even if in Support::Sensor info 2021-02-23 15:19:03 +01:00
D.R.racer
734e497cd0 Move wizard msgs into messages.h/c + add more translation markers 2021-02-23 15:09:19 +01:00
D.R.racer
95567b8072 Update translations of the Shipping/Service prep welcome msg 2021-02-23 11:10:18 +01:00
3d-gussner
fdff5d84b2 Move Filament sensors to Support -> Sensor Info 2021-02-23 08:52:40 +01:00
3d-gussner
8d4176a530 Add "Fan check [On|Off]" menu to tune 
User can en/disable the fan check during print. This is very useful in case of false positive
fan errors to let the user to decide to finish print with "faulty" fan.
 2021-02-23 07:24:33 +01:00
3d-gussner
30b60e44d2 || isPrintPaused is already in PRINTER_ACTIVE 2021-02-22 18:21:20 +01:00
3d-gussner
fd154e4b69 Again revert Settings 2021-02-22 18:10:43 +01:00
3d-gussner
5894883324 Fix USB/host FAN Error resume 
Show Settings during Pause also for USB/host prints
 2021-02-22 16:37:01 +01:00
3d-gussner
9110ffd4ae Revert M602 2021-02-22 16:36:21 +01:00
3d-gussner
cbe207eb59 Fix issue #3037 
`starttime` is only set for SD prints via gcode `M24 and M32`
 2021-02-20 13:18:53 +01:00
Yuri D'Elia
461d3f6749 Remove duplicate function is_buffer_empty() 
Use cmd_buffer_empty() instead
 2021-02-19 17:06:00 +01:00
D.R.racer
87f416f303 Keep wizard flag==2 even when a user restarts during Z-calibration 
i.e. prevent jumping into the standard wizard if reset during Z-
calibration
 2021-02-18 15:39:29 +01:00
3d-gussner
495dcee066 Show LCD Settings during pause 2021-02-18 12:09:43 +01:00
3d-gussner
a109d20506 Merge remote-tracking branch 'upstream/MK3' into PFW-1174 
Fix merge issues
 2021-02-18 11:05:31 +01:00
3d-gussner
c1d8e6660b Indentations 2021-02-18 10:07:40 +01:00
DRracer
adf347fdf1
Merge pull request #3034 from 3d-gussner/MK3_PFW-960 
PFW-960 Improve M0/M1/M117
 2021-02-18 09:59:01 +01:00
3d-gussner
291ee8e46d Indentations 2021-02-18 09:53:14 +01:00
3d-gussner
75a385d614 Indentations 2021-02-18 09:10:28 +01:00
D.R.racer
4e768057e7 Use standard wdt_reset() from AVR lib 
which translates to the one `wdr` instruction like before
+ wrap configuration of watchdog into cli/sei
 2021-02-17 15:59:52 +01:00
3d-gussner
2b4cf8d56e Fix FANCHECK build error 2021-02-17 13:52:31 +01:00
D.R.racer
a456c4a52d Make watchdogReset() force_inline 
It makes no sense keeping watchdogReset as a separate function which
must be called, since it only contains one instruction: "wdr".

Not only was the code larger by 32 bytes in total, but also much slower
(call+ret take 4 cycles together for no reason in this case).

Surprisingly, doing just this on FW 3.9.3 solves issue #2954 on the one
affected EINSY board, even though it makes not much sense (there must be
some other timing issue).
 2021-02-17 13:04:46 +01:00
D.R.racer
c3bea4d71c Make a special welcome message for shipping/service prep 
Another request from our Service dept. - the user shall be prevented
from skipping the intro wizard, because otherwise some preset/calibrated
features will look like not done - especially live-z calibration.

And since there are users, who send a machine to service to perform 1st
layer calibration only, they must not omit the Z-calibration at the
start after shipping.
 2021-02-17 12:53:56 +01:00
3d-gussner
c79bce010d Don't show Settings during pause 2021-02-17 12:18:30 +01:00
DRracer
7a84ad71dc
Merge pull request #3023 from DRracer/service-prep 
Add Service prep. item into Factory reset
 2021-02-17 10:43:08 +01:00
D.R.racer
dbb0269bd4 Make indentation consistent with surrounding code in factory_reset() 2021-02-17 08:27:49 +01:00
3d-gussner
afc15b42bb Indentations 2021-02-17 08:13:32 +01:00
3d-gussner
59c2b7e795 Fix Fan error issues. 2021-02-17 07:42:12 +01:00
3d-gussner
66ea1bdfba Indentations 2021-02-16 12:31:23 +01:00
3d-gussner
d6c6517fcd Back to Status after Resuming 2021-02-16 07:27:46 +01:00
3d-gussner
c2637d9430 Documentation Show Main Menu 2021-02-15 18:35:04 +01:00