3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
5,481 Commits 3 Branches 78 Tags 40 MiB
af9daecf5b
Commit Graph

1526 Commits

Author SHA1 Message Date
Yuri D'Elia
64f646a8a4 Add notices about Sheet::bed_temp and Sheet::pinda_temp being unused 
There is a potential for 2*8 bytes of extra sparse eeprom space, plus a
few bytes saved if we remove the update calls, so add a notice that
these values are currently only written-to, but never actually used.
 2022-05-11 11:15:36 +02:00
Guðni Már Gilbert
efde923e57 Purge ftostr3 
Saves 54 bytes of Flash and 2 bytes of SRAM
 2022-02-27 20:58:39 +01:00
Alex Voinea
8e85242c8f Temperature selection is int16_t. Use sprintf for PID start command. 
Saves 90B of flash and 2B of ram
 2022-02-27 20:57:24 +01:00
Guðni Már Gilbert
6d98e99356 Use sprintf_P for M301 instead of ftostr32 
Also fixed indentation of if statement

Saves 248 bytes of flash
 2022-02-27 20:57:24 +01:00
Guðni Már Gilbert
0e6ff38b61 Optimise strcpy calls to use strcpy_P 
Saves 24 bytes of SRAM
 2022-02-27 20:57:24 +01:00
Alex Voinea
ce7cccab80
Merge pull request #3417 from leptun/MK3_temperature_busy_messages 
Print busy messages while waiting for heaters
 2022-02-25 12:03:23 +02:00
Guðni Már Gilbert
227b6b4b03 Fix FINDA timer 
We want to set the FINDA state IF the timer has not expired.
It is helpful to see why by looking at the commit which broke
this 802b8860c8

Without this fix my FINDA sensor just shows N/A. But after this commit is works perfectly.
 2022-02-20 12:28:40 +00:00
Alex Voinea
0cc364ff7a Print busy messages while waiting for heaters 2022-02-17 17:53:02 +01:00
DRracer
159c9c34bd
Merge pull request #3089 from wavexx/show_axes_during_crash 
Show affected axes in crash detection messages
 2022-02-17 09:52:19 +01:00
Yuri D'Elia
9b6fca9214 Introduce lcd_show_yes_no_and_wait for future use 
Split off yes/no lcd handling from
lcd_show_fullscreen_message_yes_no_and_wait_P into a separate function
in order to allow generic requests where the text prompt can change.
 2022-02-16 14:17:56 +01:00
Alex Voinea
91797214b0 Update Eject and Cut to use for loop for menu items 
Saves 134B of flash
 2022-02-15 23:37:55 +01:00
Alex Voinea
2ec530c282 Do not hardcode the factory reset menu item count 2022-02-15 15:58:33 +01:00
Alex Voinea
a6331d22c8 Remove ancient SNMM code in the MK3 branch 2022-02-15 15:58:33 +01:00
Alex Voinea
775c460dc5
Merge branch 'MK3' into MK3_fix_usb_timer 2022-02-15 10:36:57 +01:00
DRracer
9aa0b250ff
Merge pull request #3405 from wavexx/fixup_suspicious_indentation 
Fixup suspicious indentation in lcd_show_sensors_state
 2022-02-15 10:31:20 +01:00
DRracer
2d9a154541
Merge pull request #3247 from gudnimg/remove-ifdef-gudni 
Remove unused ifdef `MK1BP` and `MAX_SILENT_FEEDRATE`
 2022-02-15 10:27:21 +01:00
Alex Voinea
73406f53e9
Merge pull request #3393 from gudnimg/add-menu-back-arrow-to-preheat-menu 
Add menu back arrow to the Preheat menu
 2022-02-15 08:49:07 +01:00
Yuri D'Elia
40881f52ad Prettify lcd_show_sensors_state() v2 
Allow to show the full precision of Xd/Yd by rearranging the layout
 2022-02-14 23:30:08 +01:00
Yuri D'Elia
0c63e0e8df Prettify MK3 sensor-info screen 2022-02-14 18:07:54 +01:00
Yuri D'Elia
d89f4e9952 Fix indentation in the MK3 sensor information screen 2022-02-14 17:59:47 +01:00
Alex Voinea
4ec8781df2 Fix usb print timer 2022-02-13 22:52:49 +01:00
Guðni Már Gilbert
bd3a835516 Optimise preheat menu's MENU_ITEM_BACK_P 
Saves 10 bytes of flash memory
 2022-02-12 14:17:11 +00:00
Guðni Már Gilbert
70ee06144e Add menu back arrow to the Perheat menu 
All other menus have this arrow on the back button.
 2022-02-12 12:48:39 +00:00
Guðni Már Gilbert
4672b6444c
Merge branch 'MK3' into remove-eeprom-func 2022-02-11 19:32:11 +00:00
Alex Voinea
42b91a83cd Merge branch 'MK3' into MK3_3.12_Optimizations 2022-02-10 10:36:31 +01:00
Alex Voinea
234add3c58 Merge branch 'MK3' into lcd-optimisation-gudni 2022-02-08 00:14:59 +01:00
Guðni Már Gilbert
121324d20b Revert "Remove one space from Support -> Temperatures menu" 
This reverts commit 158877e736.
 2022-02-08 00:09:09 +01:00
Alex Voinea
9c3c47ea29
Merge pull request #3253 from gudnimg/sd-sub-dir-fix 
Fix edge case when SD card is inserted while user is inside the 'No SD card' submenu
 2022-02-07 17:09:14 +01:00
3d-gussner
0d4d386991
Merge pull request #3228 from gudnimg/remove-mmu_lcd 
Remove a few redundant lines from ultralcd code
 2022-02-07 17:04:34 +01:00
Guðni Már Gilbert
ff00988303 Revert "Replace hardcoded values and optimise strings" 
This reverts commit e62bc4686f.
 2022-02-06 11:09:45 +01:00
Guðni Már Gilbert
c6ecc0dfc9
Merge branch 'prusa3d:MK3' into lcd-optimisation-gudni 2022-02-06 09:54:58 +00:00
Alex Voinea
d06e74dd6f Fix Welcome message and language flashing 2022-02-05 23:44:24 +01:00
Guðni Már Gilbert
a22a7ea9d7 Change LCD_STR_UPLEVEL to LCD_STR_UPLEVEL[0] for consistency 
Saves 4 bytes of flash and 2 bytes of SRAM (Arduino IDE 1.8.19)
 2022-02-05 19:58:31 +00:00
Guðni Már Gilbert
d5b666d260 Add LCD_STR_SOLID_BLOCK to represent \xFF 2022-02-05 19:53:42 +00:00
Guðni Már Gilbert
e62bc4686f Replace hardcoded values and optimise strings 
This commit saves 64 bytes of flash memory on my end
 2022-02-05 18:28:17 +00:00
Alex Voinea
21a0b53647 remove firstrun 2022-02-04 13:27:43 +01:00
Alex Voinea
6ce7792045 Remove "hh" in fmt where it makes no difference 2022-02-02 20:58:21 +01:00
Guðni Már Gilbert
146b008186 Remove redundant variable farm_status 
It is unused and status_number variable can be used instead.
 2022-02-02 18:37:55 +00:00
Guðni Már Gilbert
459570ab66 Change prusa_stat_printerstatus parameter to uint8_t 
Also changes status_number global variable to uint8_t

Changes save 80 bytes of flash and 1 byte of SRAM (Arduino IDE 1.8.19)
 2022-02-02 18:35:52 +00:00
Guðni Már Gilbert
e525bcb7f5 Optimise lcd_selftest_screen input parameters and return type 
* _progress_scale is max 3 so it can be uint8_t
* _progress is max 6 so it can be uint8_t
* Change _delay type to uint16_t to be explicit

Changes save 102 bytes of flash memory (Arduino IDE 1.8.19)
 2022-02-01 18:57:43 +00:00
Guðni Már Gilbert
9bf45773f9 Merge remote-tracking branch 'upstream/MK3' into rebase-testing-ground-v2 2022-01-30 11:43:16 +00:00
Guðni Már Gilbert
f8847edca6 Remove one unused variable 
Saves 1 byte of SRAM

The variable is only assigned a value but is never used.
 2022-01-30 11:39:28 +00:00
Guðni Már Gilbert
b835f31904 Remove variable move_menu_scale 
The variable is just set to 1.0 and is never modified, I also
removed the function lcd_move_menu_1mm()

Changes save 96 bytes of flash memory and 4 bytes of SRAM
 2022-01-30 11:39:27 +00:00
Guðni Már Gilbert
a940c364c9 Create enum class for heating_status variable 2022-01-30 11:39:27 +00:00
Guðni Már Gilbert
2013295f94 Change farm_timer to uint8_t 
Remove extern declaration of farm_timer and farm_status as they
are only used in one file.

Saves 26 bytes of flash
 2022-01-30 11:39:26 +00:00
Guðni Már Gilbert
a687173e02 Change custom_message_state_old and custom_message_state to uint8_t 
I see max value as 7*7+10 = 59

Saves 100 byte of flash and 1 byte of SRAM
 2022-01-30 11:39:26 +00:00
Guðni Már Gilbert
60c9640602 Change heating_status_counter to uint8_t 
It has a max value of 14

Saves 28 bytes of flash and 1 byte of SRAM
 2022-01-30 11:39:26 +00:00
Guðni Már Gilbert
6a9bab02f7 Convert display_time to ShortTimer 
Saves 24 bytes of flash, 1 byte of SRAM
 2022-01-30 11:39:25 +00:00
Guðni Már Gilbert
802b8860c8 Convert mmu_last_finda_response to ShortTimer 
Saves 48 bytes of Flash, 1 byte of SRAM
 2022-01-30 11:39:25 +00:00
Guðni Már Gilbert
37fd9d1b11 Convert NcTime to ShortTimer 
The variable is only used in ultralcd.cpp so I made it static there
and deleted it from Marlin_main.cpp

Saves 24 bytes of flash and 1 byte of SRAM
 2022-01-30 11:39:25 +00:00