3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
706 commits 3 branches 78 tags 40 MiB
Commit graph

706 commits

This branch
This branch
All branches
Author SHA1 Message Date
bubnikv
ba49c21f17 Unified the volumetric_multiplier with extrusion_multiply to improve 
numeric accuracy and to reduce compuatitonal load. With this commit,
the numeric rounding is fixed not only for the M221 G-code
(as implemented by the preceding commit), but also for the volumetric
extrusion in general.

Removed the old FILAMENT_SENSOR code, which served the purpose
to modulate the volumetric multiplayer in real time depending
on the measured filament diameter. This feature will certainly not be
used by Prusa Research in the near future as we know of no sensor,
which would offer sufficient accuracy for a reasonable price.
 2018-02-21 11:25:21 +01:00
bubnikv
ee5949c56e Fix of a loss in precission when the extruder multiplier is set 
with M221. For 50um layers, the precision loss leads to holes
in the print.
 2018-02-20 15:30:18 +01:00
bubnikv
403ed26d47 Merge remote-tracking branch 'remotes/upstream/MK3' into MK3 2018-02-20 15:21:44 +01:00
PavelSindler
f916e0f879
Merge pull request #475 from XPila/MK3-accurate_homming 
tmc2130 optimalization, accurate homing and microstep linearity corre…
 2018-02-19 15:30:06 +01:00
Robert Pelnar
dff8c29362 Microstep linearity correction, optimized wave compression. 
Correction factor can be adjusted from 0.9 to 1.25 by 0.005 steps.
 2018-02-17 19:58:40 +01:00
Robert Pelnar
57499dc6a0 M350 for E axis (8, 16, 32, 64, 128 microsteps) 2018-02-15 15:40:49 +01:00
Robert Pelnar
79caf3d9c6 tmc2130 optimalization, accurate homing and microstep linearity correction 
dcode D12 removed (no longer needed)
homeaxis optimized + xy home calibration support
new eeprom variables
new lcd menu edit types (byte3, mres, wfac), new menu "Experimental"
currents adjusted
 2018-02-15 04:17:58 +01:00
PavelSindler
a58767271b
Merge pull request #462 from PavelSindler/eeprom_version_change_fix 
erase eeprom section which belongs to M500 gcode in case that version…
 2018-02-05 16:58:47 +01:00
PavelSindler
33aa3d5e7d commint nr 2018-02-05 16:56:31 +01:00
PavelSindler
3bd892135a erase eeprom section which belongs to M500 gcode in case that version was changed and default settings are used 2018-02-05 16:49:06 +01:00
bubnikv
485355274e Optimized the MarlinSerial class by declaring all methods static. 
The MarlinSerial defines no member variable, though the AVR GCC
stored a "this" pointer onto stack when calling the non-static
methods anyway.
 2018-02-02 20:25:19 +01:00
PavelSindler
8375e2cee3
Merge pull request #456 from PavelSindler/MK3_for_merging 
version changed
 2018-02-02 18:13:45 +01:00
PavelSindler
36536044f4 version changed 2018-02-02 17:48:02 +01:00
PavelSindler
c0d0c12eea
Merge pull request #455 from XPila/MK3 
bugfix - failstats (total counters) reset to zero for empty eeprom (0…
 2018-02-02 16:18:36 +01:00
Robert Pelnar
4d8807e924 bugfix - failstats (total counters) reset to zero for empty eeprom (0xff) 2018-02-02 15:59:37 +01:00
XPila
6ba52e33d3
Merge pull request #453 from PavelSindler/fw_version_check 
Fw version check and M600 filament unload current
 2018-02-01 20:35:37 +01:00
PavelSindler
2dd2c971e2 whitespace 2018-02-01 20:25:19 +01:00
PavelSindler
84f7d057f3 fw version check: FW_VERSION string is case insensitive (parsing RC works) 2018-02-01 20:23:45 +01:00
PavelSindler
d92f6292aa unload with lowered current 2018-02-01 17:43:03 +01:00
PavelSindler
a256a8ff19
Merge pull request #450 from XPila/3.1.1-RC6 
filament sensor additional check after runout (3mm back, 3mm forward …
 2018-02-01 12:20:59 +01:00
Robert Pelnar
e20ee149b0 filament sensor additional check after runout (3mm back, 3mm forward @200mm/min) 2018-01-31 21:10:41 +01:00
PavelSindler
9d8191323b
Merge pull request #440 from XPila/3.1.1-RC6 
Extruder stealthChop and constant-off-time mode.
 2018-01-31 20:21:02 +01:00
XPila
822dd8ff9c
Merge pull request #448 from PavelSindler/eeprom_versions 
EEPROM version change: inform user on LCD that default settings were loaded
 2018-01-31 20:06:19 +01:00
XPila
beb3a507d3
Merge pull request #441 from PavelSindler/send_OK 
PID cal. is not sending OK periodically, print fan error pauses print…
 2018-01-31 20:03:08 +01:00
Robert Pelnar
adc69eda18 PINDA temp. calibration warning messages. 2018-01-31 17:03:33 +01:00
Robert Pelnar
1a01282e33 cardreader - new member "paused" 
tmc2130 - decreased crash sensitivity for Y
 2018-01-31 15:20:27 +01:00
Robert Pelnar
4c5618c371 failstats - reset "last print" counters 
card - new member variable "paused" (bool)
 2018-01-31 15:09:36 +01:00
Robert Pelnar
daaac2fb88 fail stats 2018-01-30 19:49:40 +01:00
Robert Pelnar
210b97d16d New fail stats (global, last print), crashdetection X and Y separated 2018-01-30 13:10:36 +01:00
PavelSindler
88f248cb77 Inform user that hardcoded default settings were loaded (EEPROM version change) 2018-01-30 11:31:44 +01:00
PavelSindler
cbcfcee48f PID cal. is not sending OK periodically, print fan error pauses print in octoprint (not disconnecting), initialize serial line when swithing in settings menu 2018-01-25 15:23:11 +01:00
PavelSindler
fdd87da83f
Merge pull request #438 from TheZeroBeast/MK3-EncoderFix 
MK3 - ENCODER PULSES and STEPS Re-aligned with Clicks
 2018-01-25 11:59:29 +01:00
Robert Pelnar
39bd5c3a1d Extruder stealthChop and constant-off-time mode. 
Extruder different chopper frequency in spreadcycle.
Dcodes (fix)
 2018-01-25 05:13:21 +01:00
TheZeroBeast
f4073120ef -m Added Encoder Fix changes 2018-01-25 06:49:28 +10:00
XPila
17cadf463a
Merge pull request #433 from XPila/3.1.1-RC6 
Extruder resolution changed to 32usteps
 2018-01-24 01:42:46 +01:00
Robert Pelnar
cae68d9f6d Extruder resolution changed to 32usteps 
build 151
 2018-01-24 01:41:42 +01:00
XPila
556205d993
Merge pull request #432 from PavelSindler/invalid_gcodes 
invalid / unknown gcodes reported on serial
 2018-01-24 00:12:47 +01:00
XPila
975ed14cb6
Merge pull request #431 from PavelSindler/fan_error_resume 
SD card long pause update
 2018-01-24 00:12:33 +01:00
XPila
110ab8b2f6
Merge pull request #426 from PavelSindler/temperatures_update 
Preheat temperatures update
 2018-01-24 00:11:59 +01:00
XPila
b2ba72ffcd
Merge pull request #411 from PavelSindler/typo_fixed 
typo fixed
 2018-01-24 00:10:28 +01:00
XPila
777dcf072b
Merge pull request #430 from bubnikv/MK3_fsensor_fullrate 
Optimization of the filament sensor.
 2018-01-24 00:10:00 +01:00
PavelSindler
70ff22571f minor change 2018-01-23 20:04:18 +01:00
PavelSindler
3adedb558b invalid / unknown codes reported on serial 2018-01-23 20:01:02 +01:00
PavelSindler
64a709c097 removed temporary debuging code 2018-01-23 19:14:52 +01:00
PavelSindler
05e0abbd9d startFileprint delayed 2018-01-23 19:11:04 +01:00
bubnikv
44dc12005f Optimization of the filament sensor. 2018-01-23 16:47:42 +01:00
PavelSindler
c38458eb67 init 2018-01-23 16:21:43 +01:00
XPila
09e0c566e8
Merge pull request #420 from bubnikv/MK3_stepper_blocking 
Mk3 stepper blocking
 2018-01-23 13:15:59 +01:00
PavelSindler
bde1996250
Merge pull request #419 from bubnikv/MK3_debug 
Support for debug builds:
 2018-01-22 18:58:02 +01:00
bubnikv
69f97e0ec3 Separated the "Unknown" build from the "Development" build. 
Documented purpose of the various build types.
 2018-01-22 17:41:05 +01:00