3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
712 Commits 3 Branches 78 Tags 40 MiB
d020f48791
Commit Graph

237 Commits

Author SHA1 Message Date
PavelSindler
d020f48791
Merge pull request #485 from bubnikv/M221_fix 
Unified the volumetric_multiplier with extrusion_multiply to improve
 2018-02-22 14:17:09 +01:00
bubnikv
ba49c21f17 Unified the volumetric_multiplier with extrusion_multiply to improve 
numeric accuracy and to reduce compuatitonal load. With this commit,
the numeric rounding is fixed not only for the M221 G-code
(as implemented by the preceding commit), but also for the volumetric
extrusion in general.

Removed the old FILAMENT_SENSOR code, which served the purpose
to modulate the volumetric multiplayer in real time depending
on the measured filament diameter. This feature will certainly not be
used by Prusa Research in the near future as we know of no sensor,
which would offer sufficient accuracy for a reasonable price.
 2018-02-21 11:25:21 +01:00
XPila
74e6ff67d3
Merge pull request #482 from bubnikv/M221_fix 
M221 fix
 2018-02-20 19:10:07 +01:00
Robert Pelnar
e2e48bfd71 SD speed test (DEBUG) 
homeaxis - fix set_destination_to_current
 2018-02-20 18:50:20 +01:00
bubnikv
ee5949c56e Fix of a loss in precission when the extruder multiplier is set 
with M221. For 50um layers, the precision loss leads to holes
in the print.
 2018-02-20 15:30:18 +01:00
Robert Pelnar
57499dc6a0 M350 for E axis (8, 16, 32, 64, 128 microsteps) 2018-02-15 15:40:49 +01:00
Robert Pelnar
79caf3d9c6 tmc2130 optimalization, accurate homing and microstep linearity correction 
dcode D12 removed (no longer needed)
homeaxis optimized + xy home calibration support
new eeprom variables
new lcd menu edit types (byte3, mres, wfac), new menu "Experimental"
currents adjusted
 2018-02-15 04:17:58 +01:00
PavelSindler
3bd892135a erase eeprom section which belongs to M500 gcode in case that version was changed and default settings are used 2018-02-05 16:49:06 +01:00
Robert Pelnar
4d8807e924 bugfix - failstats (total counters) reset to zero for empty eeprom (0xff) 2018-02-02 15:59:37 +01:00
PavelSindler
2dd2c971e2 whitespace 2018-02-01 20:25:19 +01:00
PavelSindler
d92f6292aa unload with lowered current 2018-02-01 17:43:03 +01:00
PavelSindler
9d8191323b
Merge pull request #440 from XPila/3.1.1-RC6 
Extruder stealthChop and constant-off-time mode.
 2018-01-31 20:21:02 +01:00
XPila
822dd8ff9c
Merge pull request #448 from PavelSindler/eeprom_versions 
EEPROM version change: inform user on LCD that default settings were loaded
 2018-01-31 20:06:19 +01:00
Robert Pelnar
adc69eda18 PINDA temp. calibration warning messages. 2018-01-31 17:03:33 +01:00
Robert Pelnar
4c5618c371 failstats - reset "last print" counters 
card - new member variable "paused" (bool)
 2018-01-31 15:09:36 +01:00
Robert Pelnar
daaac2fb88 fail stats 2018-01-30 19:49:40 +01:00
Robert Pelnar
210b97d16d New fail stats (global, last print), crashdetection X and Y separated 2018-01-30 13:10:36 +01:00
PavelSindler
88f248cb77 Inform user that hardcoded default settings were loaded (EEPROM version change) 2018-01-30 11:31:44 +01:00
PavelSindler
cbcfcee48f PID cal. is not sending OK periodically, print fan error pauses print in octoprint (not disconnecting), initialize serial line when swithing in settings menu 2018-01-25 15:23:11 +01:00
XPila
556205d993
Merge pull request #432 from PavelSindler/invalid_gcodes 
invalid / unknown gcodes reported on serial
 2018-01-24 00:12:47 +01:00
XPila
975ed14cb6
Merge pull request #431 from PavelSindler/fan_error_resume 
SD card long pause update
 2018-01-24 00:12:33 +01:00
XPila
b2ba72ffcd
Merge pull request #411 from PavelSindler/typo_fixed 
typo fixed
 2018-01-24 00:10:28 +01:00
XPila
777dcf072b
Merge pull request #430 from bubnikv/MK3_fsensor_fullrate 
Optimization of the filament sensor.
 2018-01-24 00:10:00 +01:00
PavelSindler
70ff22571f minor change 2018-01-23 20:04:18 +01:00
PavelSindler
3adedb558b invalid / unknown codes reported on serial 2018-01-23 20:01:02 +01:00
PavelSindler
64a709c097 removed temporary debuging code 2018-01-23 19:14:52 +01:00
PavelSindler
05e0abbd9d startFileprint delayed 2018-01-23 19:11:04 +01:00
bubnikv
44dc12005f Optimization of the filament sensor. 2018-01-23 16:47:42 +01:00
PavelSindler
c38458eb67 init 2018-01-23 16:21:43 +01:00
XPila
09e0c566e8
Merge pull request #420 from bubnikv/MK3_stepper_blocking 
Mk3 stepper blocking
 2018-01-23 13:15:59 +01:00
bubnikv
69f97e0ec3 Separated the "Unknown" build from the "Development" build. 
Documented purpose of the various build types.
 2018-01-22 17:41:05 +01:00
bubnikv
a94e266cf1 Documented CPU load and frequency of the following interrupts: 
9.  ISR(INT7_vect) 			- Fan signal interrupt
26. ISR(M_USARTx_RX_vect)	- USB to serial RX
37. ISR(USART1_RX_vect)		- R-PI serial RX
 2018-01-20 16:20:51 +01:00
bubnikv
815dfcb14b Implemented a stepper timer reset after a long blocking cli() 
or DISABLE_STEPPER_DRIVER_INTERRUPT().
If this is not done, the stepper interrupt would likely overflow,
leading to a maximum 32ms delay before the stepper interrupt wakes up.
In addition, the stepper timer overflow error would be reported
by the debug builds.
 2018-01-20 15:39:21 +01:00
bubnikv
9e534c1990 Minimize risk of stepper routine interrupt blocking by reorganizing 
the routine to move the G-code line length from the command queue
to the planner queue.
 2018-01-20 14:37:22 +01:00
bubnikv
330f1576fc Support for debug builds: 
A build version and repository is displayed on the welcome screen,
D-codes, stack overflow check and stepper timer overflow check
are enabled in the debug mode.
 2018-01-18 16:24:25 +01:00
PavelSindler
b5f8b1d97c
Merge pull request #412 from PavelSindler/debug_version 
initial message for debugging fw version
 2018-01-18 13:18:16 +01:00
PavelSindler
e60cb2a79e unload filament sequence same as in M600 2018-01-17 21:54:34 +01:00
PavelSindler
4843f2c48e initial message not shown on release candidate versions 2018-01-17 17:38:34 +01:00
PavelSindler
bfa675c1a4 initial message for debugging fw version 2018-01-17 16:00:19 +01:00
PavelSindler
b73520bcea successfull -> successful 2018-01-17 14:40:37 +01:00
PavelSindler
fbf947b75c maiden eeprom: tmc2130_mode is set to normal 2018-01-16 16:56:58 +01:00
XPila
026f68fd6f
Merge pull request #404 from PavelSindler/xyz_fixes 
xyz homing hotfix, xyz cal. status changed
 2018-01-16 01:39:57 +01:00
XPila
9efa1d3a03
Merge pull request #403 from PavelSindler/M600_update 
timeout fix and unload message shortened
 2018-01-16 01:39:18 +01:00
PavelSindler
06c6cc119b xyz homing hotfix, xyz cal. status changed 2018-01-16 01:00:09 +01:00
PavelSindler
d8117eab66 timeout fix and MSG_UNLOAD_SUCCESSFULL message shortened 2018-01-15 17:39:42 +01:00
Robert Pelnar
981a681e52 Temperature ISR synchronization, M600 - faster unload 2018-01-15 17:29:07 +01:00
XPila
87ffb0b193
Merge pull request #400 from PavelSindler/M600_update 
M600 update
 2018-01-15 15:27:41 +01:00
PavelSindler
9e7686b77f unload changes reverted back 2018-01-15 11:35:49 +01:00
PavelSindler
c36af887b7 M600 has timeout for nozzle, different procedure for unload 2018-01-15 11:30:28 +01:00
Robert Pelnar
9aedaa8fe7 build 146 
hard limits
fsensor overflow fix
 2018-01-14 23:59:43 +01:00