Commit Graph

183 Commits

Author SHA1 Message Date
Robert Pelnar
176c32de91 TMC2130 stallguard homing - sg_thrs_x and sg_thrs_y - command M916, lcd_silent_mode_set_tune 2017-07-03 10:39:56 +02:00
Robert Pelnar
e09f0c64c7 TMC2130 tuning, silent/high power mode 2017-07-03 07:43:50 +02:00
Robert Pelnar
c4307c7373 TMC2130 tunning, overtemp 2017-07-03 00:11:42 +02:00
PavelSindler
17074e1d25 saving/restoring filename and current position in bytes to eeprom, UVLO changed 2017-07-02 21:01:23 +02:00
PavelSindler
29499510f4 Merge remote-tracking
pins
branch 'upstream/MK3' into MK3
pin number correction
2017-07-02 16:10:14 +02:00
PavelSindler
db12119b68 position saving and restoring in UVLO 2017-07-02 00:11:21 +02:00
Robert Pelnar
8b66258745 Pin number correction (TACH_0) 2017-07-01 19:33:56 +02:00
PavelSindler
ae0c64248f sync with upstream 2017-07-01 19:29:57 +02:00
PavelSindler
c4be651d2b uvlo initial version 2017-07-01 18:51:02 +02:00
Robert Pelnar
4f9a8147a4 renamed EINY 0.1a to EINY 0.3a
added EINY 0.4a
changed jerk (optimized for MK3 silent mode)
2017-07-01 17:28:32 +02:00
Robert Pelnar
f6a8e1df9d TMC2130 + software SG homing + LF lineendings + tmc2130 debug M-Codes
M910 - tmc2130_init
M911 - set holding currents
M912 - set running currents
M913 - print currents
2017-07-01 12:39:16 +02:00
PavelSindler
43d696659f 3.0.12-RC2 sync 2017-06-29 18:35:43 +02:00
PavelSindler
0578ea527e fan speed check initial version, selftest updated 2017-06-28 14:24:45 +02:00
michalprusa
fd2a1f1df4 Resolution setting fixed 2017-06-17 20:54:59 +02:00
michalprusa
6f3c28c4a7 Filament sensor PAT9125 implemented 2017-06-17 20:40:22 +02:00
michalprusa
21177476ac StallGuard homing implemented, working 2017-06-17 16:58:36 +02:00
michalprusa
3e642d61cb Stepper Y inverted, current lowered. 2017-06-17 15:58:26 +02:00
michalprusa
c83b1833bc Johhny Firmware sync 2017-06-17 15:42:48 +02:00
michalprusa
1224705edc Added EINY config 2017-03-24 20:16:29 +01:00
michalprusa
cabaec95c8 EINY implementation 2017-03-24 20:16:03 +01:00
michalprusa
3faef75a0d 3.0.10 sync 2017-03-24 19:47:50 +01:00
bubnikv
99ae9707de Fixed a missing SD card error on start up, if the setup was blocked
by some dialog for an extended period of time.
Increased version to 3.0.8 final.
2016-09-01 16:52:46 +02:00
bubnikv
fe61647e68 Multi screen messages will display a "next page" indicator
if a next page follows.
2016-09-01 15:14:55 +02:00
bubnikv
50a0ca8519 Italian translations. 2016-09-01 14:10:41 +02:00
bubnikv
25024d8975 Added Spanish translations. 2016-09-01 14:07:27 +02:00
bubnikv
163db2f362 Fixed a bug in the optimized fixed point planner. 2016-09-01 13:31:50 +02:00
bubnikv
25b4675823 Updated Polish texts. 2016-09-01 13:13:21 +02:00
bubnikv
29cb4b2b5d Removed the non-working pressure advance feature.
Improved accuracy of diagonal moves by oversampling the path discretization.
Accelerated the planner by rewriting time critical routines from floating
point to fixed point arithmetics.
2016-09-01 13:09:56 +02:00
bubnikv
930ed11e90 Updated texts. 2016-09-01 11:19:32 +02:00
bubnikv
b470e103dc Reset live adjust on XYZ calibration.
Disable timeouts in the XYZ/Z calibration.
Don't modify feed rate multiplier during the XYZ/Z calibration.
Support multi screen messages in the XYZ/Z calibration - "move the Z carriages up" step.
Support up to three lines in the XYZ/Z calibration messages.
Added a new message "Measuring reference height of calibration point xx of 9".
Changed the "move the Z carriages up" message to suggest rotating the knob.
Changed the "live adjust not set" message to reference the manual chapter and section.
Remove debugging serial line output on Z calibration.
2016-09-01 10:44:24 +02:00
bubnikv
26405ee16f Syncing with 3.0.7 public 2016-08-31 17:12:05 +02:00
michalprusa
307d17422d 3.0.6 sync 2016-08-11 10:42:53 +02:00
michalprusa
30f0528aba Initial commit 2016-07-22 15:28:01 +02:00