3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
e147fc2cb0
Prusa-Firmware/Firmware
History
Yuri D'Elia e147fc2cb0 TM: Handle UV (PTC loss) 
Model UV as power-invariant, so that scaling P doesn't change the
intercept location (that is, the zero point remains at the same
temperature even for more powerful heaters).

NOTE: It's not clear to me whether this is generally true (couldn't
find a datasheet from the same heater in diffent power variants
showing the efficiency loss)
2023-02-10 15:44:28 +01:00
..
variants TM: Handle UVDL set/load/report/upgrade 2023-02-10 15:44:28 +01:00
adc.cpp Decouple temperature ISR from ADC readings 2022-07-25 17:30:21 +02:00
adc.h Decouple temperature ISR from ADC readings 2022-07-25 17:30:21 +02:00
asm.h Simplify GETPC() 2022-02-02 21:06:58 +01:00
AutoDeplete.cpp
AutoDeplete.h
backlight.cpp Add newline at the end of file 2020-09-15 14:56:41 +02:00
backlight.h General fixes and improvements to code 2019-10-31 19:07:20 +02:00
BlinkM.cpp
BlinkM.h
boards.h
bootapp.c Remove unused/broken bootapp code 2021-03-03 16:31:30 +02:00
bootapp.h Fix usage of RAMEND 2021-06-12 13:16:12 +02:00
cardreader.cpp Remove M999 remnants 2022-12-15 06:31:18 +01:00
cardreader.h Reduce a few magic numbers for FILENAME_LENGTH 2022-08-26 19:26:26 +03:00
cmdqueue.cpp Parenthesize IS_SD_PRINTING defensively 2022-12-19 10:47:10 +01:00
cmdqueue.h Do not reset line on serial commands without N 2022-09-21 15:05:21 +02:00
config.h Set reserved space back after cherry-pick 2022-09-14 11:33:24 +02:00
Configuration_adv.h Disable sorting speedtest 2022-07-04 18:06:54 +02:00
Configuration.cpp some improvements 2019-07-10 16:29:40 +02:00
Configuration.h Revert inverted "Running wizard ..." message 2023-01-20 09:13:19 +01:00
ConfigurationStore.cpp Allow to save/restore temperature model settings 2022-07-25 17:30:22 +02:00
ConfigurationStore.h Replace calibration state with a new calibration bitmap 2023-01-02 10:51:47 +01:00
conv2str.cpp ftostr12ns: change xx from long to int 2022-08-26 19:28:36 +03:00
conv2str.h
Dcodes.cpp Handle CALIBRATION_STATUS_{Z,XYZ} 2023-01-02 10:51:47 +01:00
Dcodes.h Improve/fix D23 for M2.5/S printers 2021-06-25 08:46:55 +02:00
doxyfile Updated doxygen docs to work better with confluence. 2019-07-19 13:51:55 +02:00
eeprom.cpp Backport eeprom functions from 3.13 2023-02-10 15:44:28 +01:00
eeprom.h TM: Allocate new eeprom parameters for PTC handling 2023-02-10 15:44:28 +01:00
fancheck.cpp TM: Fan measuring state reset unification 2023-01-16 08:43:23 +01:00
fancheck.h TM: Fan measuring state reset unification 2023-01-16 08:43:23 +01:00
fastio.h Change arduino IO to fastio where possible 2022-01-30 11:22:43 +00:00
Firmware.ino
first_lay_cal.cpp Remove MSG_M117_V2_CALIBRATION 2022-09-14 11:33:24 +02:00
first_lay_cal.h Rename lay1cal_preheat() to lay1cal_wait_preheat(). 2019-09-12 00:19:20 +02:00
fsensor.cpp Disable IR_SENSOR due to the injected ADC read for now 2022-07-25 17:30:21 +02:00
fsensor.h MK3s IR sensor improvement (#2698) 2020-06-03 16:14:56 +02:00
heatbed_pwm.cpp Remove unnecessary assignment 2021-06-21 06:47:59 +02:00
la10compat.cpp Re-adjust LA10->15 conversion 2020-09-07 21:44:34 +02:00
la10compat.h Adjust E-jerk in LA10 compatibility mode 2020-02-03 15:42:27 +01:00
language.c Update config.h translation documentation and move language to group2 2022-09-14 11:33:24 +02:00
language.h Update config.h translation documentation and move language to group2 2022-09-14 11:33:24 +02:00
lcd.cpp lcd_print_pad: do not overflow len when truncating the string 2022-09-26 12:18:47 +02:00
lcd.h Also consume longpress in lcd_consume_click() 2022-10-06 15:22:08 +02:00
le.sh
macros.h Use timer3 instead of timer5 on miniRambo 2022-08-24 10:18:45 +03:00
Marlin_main.cpp TM: Handle UVDL set/load/report/upgrade 2023-02-10 15:44:28 +01:00
Marlin.h Rename EN_ONLY to EN_FARM 2022-09-29 17:47:05 +02:00
MarlinSerial.cpp Remove ancient SNMM code in the MK3 branch 2022-02-15 15:58:33 +01:00
MarlinSerial.h Use timer3 instead of timer5 on miniRambo 2022-08-24 10:18:45 +03:00
menu.cpp Generalize menu_block_entering_on_serious_errors for menu lockout 2022-07-25 17:30:22 +02:00
menu.h Block LCD during temperature model autocalibration 2022-07-25 17:30:22 +02:00
mesh_bed_calibration.cpp Handle CALIBRATION_STATUS_LIVE_ADJUST 2023-01-02 10:51:47 +01:00
mesh_bed_calibration.h Optimise if-statments in world2machine_clamp 2022-02-01 18:37:41 +00:00
mesh_bed_leveling.cpp Use memset instead of nested for-loop to zero a 2d array 2021-08-02 19:20:51 +00:00
mesh_bed_leveling.h Remove undefined function 2022-01-30 11:39:29 +00:00
messages.cpp Change to Thermal model 2023-02-08 18:34:11 +01:00
messages.h Improve MSG_ACK_ERROR message 2022-12-19 10:50:50 +01:00
mmu.cpp Revert LongTimers to uint32_t in mmu.cpp to fix issues with MMU2 fw 1.0.6 2023-01-13 11:20:49 +01:00
mmu.h Revert LongTimers to uint32_t in mmu.cpp to fix issues with MMU2 fw 1.0.6 2023-01-13 11:20:49 +01:00
motion_control.cpp Multi-segment pause resume initial 2022-08-24 20:19:26 +03:00
motion_control.h Multi-segment pause resume initial 2022-08-24 20:19:26 +03:00
optiboot_xflash.cpp Fix MK2.5 softReset() 2023-01-13 15:41:54 +01:00
optiboot_xflash.h Rename w25x20cl to xflash 2021-04-06 10:16:47 +02:00
pat9125.cpp TWI timeout 2022-02-17 00:05:09 +01:00
pat9125.h TWI timeout 2022-02-17 00:05:09 +01:00
pins_Einsy_1_0.h Fix MK2.5 softReset() 2023-01-13 15:41:54 +01:00
pins_Rambo_1_0.h Fix MK2.5 softReset() 2023-01-13 15:41:54 +01:00
pins_Rambo_1_3.h Fix MK2.5 softReset() 2023-01-13 15:41:54 +01:00
pins.h Move SDA/SCL pins into pins.h for fastio compatibility 2021-01-29 17:48:59 +01:00
planner.cpp Remove unused variable maxlimit_status 2022-08-26 19:29:32 +03:00
planner.h Multi-segment pause resume initial 2022-08-24 20:19:26 +03:00
printers.h Remove commented out defines. 2019-07-10 17:40:33 +02:00
Prusa_farm.cpp Move all farm configuration to header 2022-08-30 13:57:43 +02:00
Prusa_farm.h Update build.sh and travis to build EN_ONLY 2022-08-30 13:57:43 +02:00
qr_solve.cpp
qr_solve.h
rbuf.c
rbuf.h
Sd2Card.cpp Enable MISO pullup during SD CMD0 2022-10-10 09:43:07 +02:00
Sd2Card.h Change return types of two functions uint8_t 2022-01-30 11:39:24 +00:00
SdBaseFile.cpp Reduce a few magic numbers for FILENAME_LENGTH 2022-08-26 19:26:26 +03:00
SdBaseFile.h Remove temporary changes from SdBaseFile.h 2021-01-28 09:42:50 +01:00
SdFatConfig.h
SdFatStructs.h
SdFatUtil.cpp Introduce STACK_GUARD_MARGIN in all variants 2021-06-12 12:08:53 +02:00
SdFatUtil.h Introduce STACK_GUARD_MARGIN in all variants 2021-06-12 12:08:53 +02:00
SdFile.cpp SDFile - fix errorneous offset computation 2021-03-30 11:33:42 +02:00
SdFile.h Remove commented debug code 2021-02-10 11:18:59 +01:00
SdInfo.h
SdVolume.cpp
SdVolume.h Extract gcode filter from SdBaseFile into SdFile + optimization 2021-01-27 09:33:28 +01:00
Servo.cpp change boolean to bool 2021-07-20 08:03:17 +02:00
Servo.h
sm4.c Merge pull request #1263 from metacollin/calfix 2022-02-15 09:26:42 +01:00
sm4.h Fix sm4.h line ending 2021-01-22 18:57:24 +02:00
sound.cpp Remove extra delay after critical sound 2023-01-02 14:27:46 +01:00
sound.h Merge remote-tracking branch 'upstream/MK3' into rebase-testing-ground-v2 2022-01-30 11:43:16 +00:00
speed_lookuptable.cpp Move speed lookup defs into a separate source 2019-05-24 17:08:32 +02:00
speed_lookuptable.h Fix MUL24x24R24 comment 2022-02-09 00:26:46 +01:00
spi.c
spi.h
static_assert.h
stepper.cpp Make the diag pins open collector with pullup. 2022-09-14 07:39:47 +02:00
stepper.h Pack endstop flags 2022-02-04 15:24:43 +01:00
stk500.h
swi2c.c Merge remote-tracking branch 'upstream/MK3' into MK3_PAT9125_I2C 2021-01-29 18:28:55 +01:00
swi2c.h
swspi.cpp
swspi.h
system_timer.h Move millis_nc to system_timer.h 2022-07-18 17:53:27 +02:00
temp_model.h TM: Handle UVDL set/load/report/upgrade 2023-02-10 15:44:28 +01:00
temperature.cpp TM: Handle UV (PTC loss) 2023-02-10 15:44:28 +01:00
temperature.h TM: Handle UVDL set/load/report/upgrade 2023-02-10 15:44:28 +01:00
thermistortables.h Implement MIN/MAX AMBIENT safety checks 2020-08-01 17:38:10 +02:00
timer02.c split timer0 and timer2 initialization. Move timer2 init early 2021-01-31 17:18:32 +02:00
timer02.h split timer0 and timer2 initialization. Move timer2 init early 2021-01-31 17:18:32 +02:00
Timer.cpp Implement Timer::expired_cont() 2022-07-25 17:30:22 +02:00
Timer.h Implement Timer::expired_cont() 2022-07-25 17:30:22 +02:00
TimerRemaining.h
tmc2130.cpp Make the diag pins open collector with pullup. 2022-09-14 07:39:47 +02:00
tmc2130.h Scale extruder motor current linearly with speed. (#2813) 2021-04-23 16:06:28 +02:00
tone04.c Merge remote-tracking branch 'upstream/MK3' into MK3_PAT9125_I2C 2021-01-29 18:28:55 +01:00
tone04.h ALTFAN implementation (#2692) 2020-06-01 17:58:15 +02:00
twi.cpp Make twi timer local to the wait function 2022-02-17 09:22:18 +01:00
twi.h TWI timeout 2022-02-17 00:05:09 +01:00
uart2.c Change printf_P without format arguments and NL to puts_P only 2021-01-22 18:56:05 +02:00
uart2.h
ultralcd.cpp Change to Thermal model 2023-02-08 18:34:11 +01:00
ultralcd.h wizard: Rewrite the wizard handling loop 2023-01-02 10:51:47 +01:00
uni_avr_rpi.h
util.cpp wizard: Resume the wizard for missing calibrations during upgrades 2023-01-02 10:51:47 +01:00
util.h wizard: Resume the wizard for missing calibrations during upgrades 2023-01-02 10:51:47 +01:00
vector_3.cpp
vector_3.h
xflash_dump.cpp Simplify GETPC() 2022-02-02 21:06:58 +01:00
xflash_dump.h Crash if pullups get enabled on the thermistor inputs 2022-02-01 12:34:07 +01:00
xflash_layout.h Make layout static regardless of what is enabled 2022-02-17 09:34:09 +01:00
xflash.c xflash: add xflash_multipage_program and documentation 2021-06-08 15:25:16 +02:00
xflash.h xflash: add xflash_multipage_program and documentation 2021-06-08 15:25:16 +02:00
xyzcal.cpp Add LCD output during xyz calibration 2022-12-20 14:30:06 +01:00
xyzcal.h Add LCD output during xyz calibration 2022-12-20 14:30:06 +01:00