..
variants
Disable pullup crash test
2022-02-15 09:07:18 +01:00
adc.c
Change printf_P without format arguments and NL to puts_P only
2021-01-22 18:56:05 +02:00
adc.h
asm.h
GETPC: Do not manipulate the 32bit return address
2021-06-19 13:56:40 +02:00
AutoDeplete.cpp
Comment.
2019-01-04 19:56:15 +01:00
AutoDeplete.h
Add filament auto deplete engine for multi-material prints with MMUv2.
2019-01-03 22:58:25 +01:00
backlight.cpp
Add newline at the end of file
2020-09-15 14:56:41 +02:00
backlight.h
General fixes and improvements to code
2019-10-31 19:07:20 +02:00
BlinkM.cpp
BlinkM.h
boards.h
bootapp.c
Remove unused/broken bootapp code
2021-03-03 16:31:30 +02:00
bootapp.h
Fix usage of RAMEND
2021-06-12 13:16:12 +02:00
cardreader.cpp
New PO-based language translation support ( #3471 )
2022-06-16 15:03:30 +02:00
cardreader.h
Change nrFiles from int16_t to uint16_t
2021-07-20 08:10:07 +02:00
cmdqueue.cpp
Add a uart RX timeout
2022-02-11 12:49:11 +01:00
cmdqueue.h
Add a uart RX timeout
2022-02-11 12:49:11 +01:00
config.h
New PO-based language translation support ( #3471 )
2022-06-16 15:03:30 +02:00
Configuration_adv.h
Add def M120_M121_ENABLED to Configuration_adv.h
2021-03-11 15:00:49 +01:00
Configuration.cpp
some improvements
2019-07-10 16:29:40 +02:00
Configuration.h
Version changed (3.11.1-RC1 build 4987)
2022-06-13 12:03:48 +02:00
ConfigurationStore.cpp
Report travel acceleration in M503
2021-02-03 11:20:28 +01:00
ConfigurationStore.h
Implement separate travel acceleration (M204 T)
2021-02-03 11:20:28 +01:00
conv2str.cpp
conv2str.h
Dcodes.cpp
* Remove redundant externs already included with temperature.h
2021-07-20 09:12:14 +02:00
Dcodes.h
Improve/fix D23 for M2.5/S printers
2021-06-25 08:46:55 +02:00
doxyfile
Updated doxygen docs to work better with confluence.
2019-07-19 13:51:55 +02:00
eeprom.cpp
Merge pull request #3055 from awenelo/add-satin-sheet
2021-04-22 07:13:32 +02:00
eeprom.h
Update doxygen documentation
2022-02-07 19:41:14 +01:00
fastio.h
Remove the extra copy of CRITICAL_SECTION from fastio
2021-01-29 18:30:16 +01:00
Firmware.ino
first_lay_cal.cpp
Gracefully dump the queue + fixes to fancheck
2020-11-09 21:49:56 +02:00
first_lay_cal.h
Rename lay1cal_preheat() to lay1cal_wait_preheat().
2019-09-12 00:19:20 +02:00
fsensor.cpp
Silence bUpdateEEPROM unused warning in MK3 variant
2021-02-01 07:09:44 +01:00
fsensor.h
MK3s IR sensor improvement ( #2698 )
2020-06-03 16:14:56 +02:00
heatbed_pwm.cpp
Remove unnecessary assignment
2021-06-21 06:47:59 +02:00
la10compat.cpp
Re-adjust LA10->15 conversion
2020-09-07 21:44:34 +02:00
la10compat.h
Adjust E-jerk in LA10 compatibility mode
2020-02-03 15:42:27 +01:00
language.c
New PO-based language translation support ( #3471 )
2022-06-16 15:03:30 +02:00
language.h
_O() macro
2022-07-01 16:01:51 +02:00
lcd.cpp
Add some warnings in lcd_buttons_update
2021-06-19 13:46:10 +02:00
lcd.h
Handle Long-Press in the main loop
2021-06-17 20:07:01 +02:00
le.sh
make all shell scripts executable
2018-12-10 07:09:03 -07:00
macros.h
More macros
2020-09-11 18:48:44 +03:00
Marlin_main.cpp
New PO-based language translation support ( #3471 )
2022-06-16 15:03:30 +02:00
Marlin.h
Merge branch 'MK3_3.11.1' into MK3_3.10.2
2022-04-07 14:05:34 +02:00
MarlinSerial.cpp
Merge pull request #2982 from DRracer/codesize
2021-01-26 12:04:39 +01:00
MarlinSerial.h
More than 7.5KB saved by slight refactoring of printing to serial line
2019-07-12 10:10:56 +02:00
menu.cpp
Remove redundant extern variable lcd_encoder from menu.cpp
2021-07-20 09:12:14 +02:00
menu.h
Cardreader progressbar code
2021-02-25 20:25:32 +02:00
mesh_bed_calibration.cpp
Use fabs() instead of abs() when using floats
2021-07-20 08:16:18 +02:00
mesh_bed_calibration.h
Calibration: detect biased PINDA and retry calibration
2021-03-12 05:04:49 +01:00
mesh_bed_leveling.cpp
7x7 points mesh bed leveling
2019-02-14 10:57:58 +02:00
mesh_bed_leveling.h
messages.c
New PO-based language translation support ( #3471 )
2022-06-16 15:03:30 +02:00
messages.h
Update ////MSG... for lang-add.sh
2022-03-16 09:01:14 +01:00
mmu.cpp
New PO-based language translation support ( #3471 )
2022-06-16 15:03:30 +02:00
mmu.h
Show FINDA state as N/A if last received response is older than 1s.
2019-10-31 17:45:22 +01:00
motion_control.cpp
Improve mc_arc() parameters
2021-07-20 09:03:50 +02:00
motion_control.h
Improve mc_arc() parameters
2021-07-20 09:03:50 +02:00
optiboot_xflash.cpp
optiboot_xflash comment about w25x20cl messages
2021-06-21 07:21:40 +02:00
optiboot_xflash.h
Rename w25x20cl to xflash
2021-04-06 10:16:47 +02:00
pat9125.c
Fix misleading indentation warnings by expanding tabs
2021-06-21 06:52:52 +02:00
pat9125.h
Isolate more pat9125 code
2020-08-20 15:34:46 +02:00
pins_Einsy_1_0.h
Allow SN get only on the Einsy
2022-02-11 13:11:13 +01:00
pins_Rambo_1_0.h
MK2.5 IR_SENSOR_PIN modified
2019-02-11 14:32:21 +01:00
pins_Rambo_1_3.h
Still use SWI2C on RAMBo10a boards
2020-09-27 14:29:07 +02:00
pins.h
Move SDA/SCL pins into pins.h for fastio compatibility
2021-01-29 17:48:59 +01:00
planner.cpp
Use fabs() instead of abs() when using floats
2021-07-20 08:16:18 +02:00
planner.h
Use uint8_t consistently for the block buffer's index
2021-06-22 06:59:57 +02:00
printers.h
Remove commented out defines.
2019-07-10 17:40:33 +02:00
qr_solve.cpp
qr_solve.h
rbuf.c
rbuf.h
Sd2Card.cpp
Update reference URL
2020-03-15 19:04:02 +09:00
Sd2Card.h
Fix for Toshiba FlashAir (or other) SD card initialization - add clock cycles between sending CMD0 and CMD8. Redone for MK3 branch)
2019-08-08 15:45:59 -04:00
Sd2PinMap.h
Move SDA/SCL pins into pins.h for fastio compatibility
2021-01-29 17:48:59 +01:00
SdBaseFile.cpp
Return SdBaseFile into previous state
2021-01-28 09:41:30 +01:00
SdBaseFile.h
Remove temporary changes from SdBaseFile.h
2021-01-28 09:42:50 +01:00
SdFatConfig.h
SdFatStructs.h
SdFatUtil.cpp
Introduce STACK_GUARD_MARGIN in all variants
2021-06-12 12:08:53 +02:00
SdFatUtil.h
Introduce STACK_GUARD_MARGIN in all variants
2021-06-12 12:08:53 +02:00
SdFile.cpp
SDFile - fix errorneous offset computation
2021-03-30 11:33:42 +02:00
SdFile.h
Remove commented debug code
2021-02-10 11:18:59 +01:00
SdInfo.h
SdVolume.cpp
SdVolume.h
Extract gcode filter from SdBaseFile into SdFile + optimization
2021-01-27 09:33:28 +01:00
Servo.cpp
change boolean to bool
2021-07-20 08:03:17 +02:00
Servo.h
sm4.c
Merge pull request #2789 from wavexx/MK3_TMC2130_DEDGE
2021-01-29 11:13:09 +01:00
sm4.h
Fix sm4.h line ending
2021-01-22 18:57:24 +02:00
sound.cpp
Fix misleading indentation warnings by expanding tabs
2021-06-21 06:52:52 +02:00
sound.h
Remove unused Sound_Save() function declaration
2021-07-20 08:51:57 +02:00
speed_lookuptable.cpp
Move speed lookup defs into a separate source
2019-05-24 17:08:32 +02:00
speed_lookuptable.h
Correct the C implementation for MultiU16X8toH16
2021-07-20 08:10:36 +02:00
spi.c
spi.h
static_assert.h
static_assert - portable solution compatible with C++98
2018-09-27 19:59:29 +02:00
stepper.cpp
Change the pullup test
2022-02-08 10:53:47 +01:00
stepper.h
Move reset LA state from G80 to M84
2020-04-29 22:51:23 +02:00
stk500.h
swi2c.c
Merge remote-tracking branch 'upstream/MK3' into MK3_PAT9125_I2C
2021-01-29 18:28:55 +01:00
swi2c.h
swspi.cpp
swspi.h
system_timer.h
ALTFAN implementation ( #2692 )
2020-06-01 17:58:15 +02:00
temperature.cpp
Merge branch 'MK3_3.11.1' into MK3_3.10.2
2022-04-07 14:05:34 +02:00
temperature.h
Merge pull request #3320 from prusa3d/MK3_3.10.1
2021-12-17 14:02:13 +01:00
thermistortables.h
Implement MIN/MAX AMBIENT safety checks
2020-08-01 17:38:10 +02:00
timer02.c
split timer0 and timer2 initialization. Move timer2 init early
2021-01-31 17:18:32 +02:00
timer02.h
split timer0 and timer2 initialization. Move timer2 init early
2021-01-31 17:18:32 +02:00
Timer.cpp
Fix Timer_test broken by conditional translation for SYSTEM_TIMER_2.
2019-01-28 19:29:31 +01:00
Timer.h
Code refactoring
2021-01-20 11:46:25 +01:00
TimerRemaining.h
Fix Timer_test broken by conditional translation for SYSTEM_TIMER_2.
2019-01-28 19:29:31 +01:00
tmc2130.cpp
Remove redundant extern variable is_usb_printing from tmc2130.cpp
2021-07-20 09:12:14 +02:00
tmc2130.h
Scale extruder motor current linearly with speed. ( #2813 )
2021-04-23 16:06:28 +02:00
tone04.c
Merge remote-tracking branch 'upstream/MK3' into MK3_PAT9125_I2C
2021-01-29 18:28:55 +01:00
tone04.h
ALTFAN implementation ( #2692 )
2020-06-01 17:58:15 +02:00
twi.c
Switch twi.c to fastio
2021-01-29 17:51:38 +01:00
twi.h
Be more compliant in the I2C protocol
2020-09-28 20:21:07 +02:00
uart2.c
Change printf_P without format arguments and NL to puts_P only
2021-01-22 18:56:05 +02:00
uart2.h
ultralcd.cpp
New PO-based language translation support ( #3471 )
2022-06-16 15:03:30 +02:00
ultralcd.h
Temp. cal. -> PINDA cal.
2022-03-07 11:47:52 +01:00
uni_avr_rpi.h
util.cpp
Correctly read FW_VERSION_NR array from progmem
2021-06-28 06:36:26 +02:00
util.h
M552 - Printer IP address
2021-02-02 13:21:16 +02:00
vector_3.cpp
vector_3.h
xflash_dump.cpp
xfdump: correctly erase all sectors in xfdump_erase
2021-06-22 19:07:49 +02:00
xflash_dump.h
Crash if pullups get enabled on the thermistor inputs
2022-02-01 12:34:07 +01:00
xflash_layout.h
Fixup the DUMP_MAGIC constant
2021-06-22 00:04:39 +02:00
xflash.c
xflash: add xflash_multipage_program and documentation
2021-06-08 15:25:16 +02:00
xflash.h
xflash: add xflash_multipage_program and documentation
2021-06-08 15:25:16 +02:00
xyzcal.cpp
Implement an online crash dumper for MK2.5 boards
2021-06-12 13:37:20 +02:00
xyzcal.h
Calibration: detect biased PINDA and retry calibration
2021-03-12 05:04:49 +01:00
dc812dabb2