..
variants
TM: Set default resistance levels for MK3/MK3S
2022-12-15 06:28:57 +01:00
adc.cpp
Decouple temperature ISR from ADC readings
2022-07-25 17:30:21 +02:00
adc.h
Decouple temperature ISR from ADC readings
2022-07-25 17:30:21 +02:00
asm.h
Simplify GETPC()
2022-02-02 21:06:58 +01:00
AutoDeplete.cpp
Comment.
2019-01-04 19:56:15 +01:00
AutoDeplete.h
Add filament auto deplete engine for multi-material prints with MMUv2.
2019-01-03 22:58:25 +01:00
backlight.cpp
Add newline at the end of file
2020-09-15 14:56:41 +02:00
backlight.h
General fixes and improvements to code
2019-10-31 19:07:20 +02:00
BlinkM.cpp
BlinkM.h
boards.h
bootapp.c
Remove unused/broken bootapp code
2021-03-03 16:31:30 +02:00
bootapp.h
Fix usage of RAMEND
2021-06-12 13:16:12 +02:00
cardreader.cpp
Remove M999 remnants
2022-12-15 06:31:18 +01:00
cardreader.h
Reduce a few magic numbers for FILENAME_LENGTH
2022-08-26 19:26:26 +03:00
cmdqueue.cpp
Parenthesize IS_SD_PRINTING defensively
2022-12-19 10:47:10 +01:00
cmdqueue.h
Do not reset line on serial commands without N
2022-09-21 15:05:21 +02:00
config.h
Set reserved space back after cherry-pick
2022-09-14 11:33:24 +02:00
Configuration_adv.h
Disable sorting speedtest
2022-07-04 18:06:54 +02:00
Configuration.cpp
some improvements
2019-07-10 16:29:40 +02:00
Configuration.h
Version changed (3.12.0 build 5672)
2023-01-10 09:55:46 +01:00
ConfigurationStore.cpp
Allow to save/restore temperature model settings
2022-07-25 17:30:22 +02:00
ConfigurationStore.h
Replace calibration state with a new calibration bitmap
2023-01-02 10:51:47 +01:00
conv2str.cpp
ftostr12ns: change xx from long to int
2022-08-26 19:28:36 +03:00
conv2str.h
Dcodes.cpp
Handle CALIBRATION_STATUS_{Z,XYZ}
2023-01-02 10:51:47 +01:00
Dcodes.h
Improve/fix D23 for M2.5/S printers
2021-06-25 08:46:55 +02:00
doxyfile
Updated doxygen docs to work better with confluence.
2019-07-19 13:51:55 +02:00
eeprom.cpp
Rename Sheets
2022-10-24 08:07:18 +02:00
eeprom.h
Fix few values
2023-01-02 15:18:43 +01:00
fancheck.cpp
Simplify altfan override initialization
2023-01-02 10:51:47 +01:00
fancheck.h
Simplify fan checks now that lcd pause works correctly
2022-07-25 17:30:22 +02:00
fastio.h
Change arduino IO to fastio where possible
2022-01-30 11:22:43 +00:00
Firmware.ino
first_lay_cal.cpp
Remove MSG_M117_V2_CALIBRATION
2022-09-14 11:33:24 +02:00
first_lay_cal.h
Rename lay1cal_preheat() to lay1cal_wait_preheat().
2019-09-12 00:19:20 +02:00
fsensor.cpp
Disable IR_SENSOR due to the injected ADC read for now
2022-07-25 17:30:21 +02:00
fsensor.h
MK3s IR sensor improvement ( #2698 )
2020-06-03 16:14:56 +02:00
heatbed_pwm.cpp
Remove unnecessary assignment
2021-06-21 06:47:59 +02:00
la10compat.cpp
Re-adjust LA10->15 conversion
2020-09-07 21:44:34 +02:00
la10compat.h
Adjust E-jerk in LA10 compatibility mode
2020-02-03 15:42:27 +01:00
language.c
Update config.h translation documentation and move language to group2
2022-09-14 11:33:24 +02:00
language.h
Update config.h translation documentation and move language to group2
2022-09-14 11:33:24 +02:00
lcd.cpp
lcd_print_pad: do not overflow len when truncating the string
2022-09-26 12:18:47 +02:00
lcd.h
Also consume longpress in lcd_consume_click()
2022-10-06 15:22:08 +02:00
le.sh
make all shell scripts executable
2018-12-10 07:09:03 -07:00
macros.h
Use timer3 instead of timer5 on miniRambo
2022-08-24 10:18:45 +03:00
Marlin_main.cpp
Fix MK2.5 softReset()
2023-01-13 15:41:54 +01:00
Marlin.h
Rename EN_ONLY to EN_FARM
2022-09-29 17:47:05 +02:00
MarlinSerial.cpp
Remove ancient SNMM code in the MK3 branch
2022-02-15 15:58:33 +01:00
MarlinSerial.h
Use timer3 instead of timer5 on miniRambo
2022-08-24 10:18:45 +03:00
menu.cpp
Generalize menu_block_entering_on_serious_errors for menu lockout
2022-07-25 17:30:22 +02:00
menu.h
Block LCD during temperature model autocalibration
2022-07-25 17:30:22 +02:00
mesh_bed_calibration.cpp
Handle CALIBRATION_STATUS_LIVE_ADJUST
2023-01-02 10:51:47 +01:00
mesh_bed_calibration.h
Optimise if-statments in world2machine_clamp
2022-02-01 18:37:41 +00:00
mesh_bed_leveling.cpp
Use memset instead of nested for-loop to zero a 2d array
2021-08-02 19:20:51 +00:00
mesh_bed_leveling.h
Remove undefined function
2022-01-30 11:39:29 +00:00
messages.cpp
Improve MSG_ACK_ERROR message
2022-12-19 10:50:50 +01:00
messages.h
Improve MSG_ACK_ERROR message
2022-12-19 10:50:50 +01:00
mmu.cpp
Revert LongTimers to uint32_t in mmu.cpp to fix issues with MMU2 fw 1.0.6
2023-01-13 11:20:49 +01:00
mmu.h
Revert LongTimers to uint32_t in mmu.cpp to fix issues with MMU2 fw 1.0.6
2023-01-13 11:20:49 +01:00
motion_control.cpp
Multi-segment pause resume initial
2022-08-24 20:19:26 +03:00
motion_control.h
Multi-segment pause resume initial
2022-08-24 20:19:26 +03:00
optiboot_xflash.cpp
Fix MK2.5 softReset()
2023-01-13 15:41:54 +01:00
optiboot_xflash.h
Rename w25x20cl to xflash
2021-04-06 10:16:47 +02:00
pat9125.cpp
TWI timeout
2022-02-17 00:05:09 +01:00
pat9125.h
TWI timeout
2022-02-17 00:05:09 +01:00
pins_Einsy_1_0.h
Fix MK2.5 softReset()
2023-01-13 15:41:54 +01:00
pins_Rambo_1_0.h
Fix MK2.5 softReset()
2023-01-13 15:41:54 +01:00
pins_Rambo_1_3.h
Fix MK2.5 softReset()
2023-01-13 15:41:54 +01:00
pins.h
Move SDA/SCL pins into pins.h for fastio compatibility
2021-01-29 17:48:59 +01:00
planner.cpp
Remove unused variable maxlimit_status
2022-08-26 19:29:32 +03:00
planner.h
Multi-segment pause resume initial
2022-08-24 20:19:26 +03:00
printers.h
Remove commented out defines.
2019-07-10 17:40:33 +02:00
Prusa_farm.cpp
Move all farm configuration to header
2022-08-30 13:57:43 +02:00
Prusa_farm.h
Update build.sh and travis to build EN_ONLY
2022-08-30 13:57:43 +02:00
qr_solve.cpp
qr_solve.h
rbuf.c
rbuf.h
Sd2Card.cpp
Enable MISO pullup during SD CMD0
2022-10-10 09:43:07 +02:00
Sd2Card.h
Change return types of two functions uint8_t
2022-01-30 11:39:24 +00:00
SdBaseFile.cpp
Reduce a few magic numbers for FILENAME_LENGTH
2022-08-26 19:26:26 +03:00
SdBaseFile.h
Remove temporary changes from SdBaseFile.h
2021-01-28 09:42:50 +01:00
SdFatConfig.h
SdFatStructs.h
SdFatUtil.cpp
Introduce STACK_GUARD_MARGIN in all variants
2021-06-12 12:08:53 +02:00
SdFatUtil.h
Introduce STACK_GUARD_MARGIN in all variants
2021-06-12 12:08:53 +02:00
SdFile.cpp
SDFile - fix errorneous offset computation
2021-03-30 11:33:42 +02:00
SdFile.h
Remove commented debug code
2021-02-10 11:18:59 +01:00
SdInfo.h
SdVolume.cpp
SdVolume.h
Extract gcode filter from SdBaseFile into SdFile + optimization
2021-01-27 09:33:28 +01:00
Servo.cpp
change boolean to bool
2021-07-20 08:03:17 +02:00
Servo.h
sm4.c
Merge pull request #1263 from metacollin/calfix
2022-02-15 09:26:42 +01:00
sm4.h
Fix sm4.h line ending
2021-01-22 18:57:24 +02:00
sound.cpp
Remove extra delay after critical sound
2023-01-02 14:27:46 +01:00
sound.h
Merge remote-tracking branch 'upstream/MK3' into rebase-testing-ground-v2
2022-01-30 11:43:16 +00:00
speed_lookuptable.cpp
Move speed lookup defs into a separate source
2019-05-24 17:08:32 +02:00
speed_lookuptable.h
Fix MUL24x24R24 comment
2022-02-09 00:26:46 +01:00
spi.c
spi.h
static_assert.h
static_assert - portable solution compatible with C++98
2018-09-27 19:59:29 +02:00
stepper.cpp
Make the diag pins open collector with pullup.
2022-09-14 07:39:47 +02:00
stepper.h
Pack endstop flags
2022-02-04 15:24:43 +01:00
stk500.h
swi2c.c
Merge remote-tracking branch 'upstream/MK3' into MK3_PAT9125_I2C
2021-01-29 18:28:55 +01:00
swi2c.h
swspi.cpp
swspi.h
system_timer.h
Move millis_nc to system_timer.h
2022-07-18 17:53:27 +02:00
temp_model.h
TM: Store only the last autotune result state
2022-12-15 06:29:10 +01:00
temperature.cpp
TM: Mark more internal functions as static
2023-01-02 10:52:20 +01:00
temperature.h
Restore the previous model state when performing a nozzle change
2022-12-15 06:42:21 +01:00
thermistortables.h
Implement MIN/MAX AMBIENT safety checks
2020-08-01 17:38:10 +02:00
timer02.c
split timer0 and timer2 initialization. Move timer2 init early
2021-01-31 17:18:32 +02:00
timer02.h
split timer0 and timer2 initialization. Move timer2 init early
2021-01-31 17:18:32 +02:00
Timer.cpp
Implement Timer::expired_cont()
2022-07-25 17:30:22 +02:00
Timer.h
Implement Timer::expired_cont()
2022-07-25 17:30:22 +02:00
TimerRemaining.h
Fix Timer_test broken by conditional translation for SYSTEM_TIMER_2.
2019-01-28 19:29:31 +01:00
tmc2130.cpp
Make the diag pins open collector with pullup.
2022-09-14 07:39:47 +02:00
tmc2130.h
Scale extruder motor current linearly with speed. ( #2813 )
2021-04-23 16:06:28 +02:00
tone04.c
Merge remote-tracking branch 'upstream/MK3' into MK3_PAT9125_I2C
2021-01-29 18:28:55 +01:00
tone04.h
ALTFAN implementation ( #2692 )
2020-06-01 17:58:15 +02:00
twi.cpp
Make twi timer local to the wait function
2022-02-17 09:22:18 +01:00
twi.h
TWI timeout
2022-02-17 00:05:09 +01:00
uart2.c
Change printf_P without format arguments and NL to puts_P only
2021-01-22 18:56:05 +02:00
uart2.h
MMU - communication, check after start, code cleaning
2018-08-07 20:37:59 +02:00
ultralcd.cpp
Revert LongTimers to uint32_t in mmu.cpp to fix issues with MMU2 fw 1.0.6
2023-01-13 11:20:49 +01:00
ultralcd.h
wizard: Rewrite the wizard handling loop
2023-01-02 10:51:47 +01:00
uni_avr_rpi.h
util.cpp
wizard: Resume the wizard for missing calibrations during upgrades
2023-01-02 10:51:47 +01:00
util.h
wizard: Resume the wizard for missing calibrations during upgrades
2023-01-02 10:51:47 +01:00
vector_3.cpp
vector_3.h
xflash_dump.cpp
Simplify GETPC()
2022-02-02 21:06:58 +01:00
xflash_dump.h
Crash if pullups get enabled on the thermistor inputs
2022-02-01 12:34:07 +01:00
xflash_layout.h
Make layout static regardless of what is enabled
2022-02-17 09:34:09 +01:00
xflash.c
xflash: add xflash_multipage_program and documentation
2021-06-08 15:25:16 +02:00
xflash.h
xflash: add xflash_multipage_program and documentation
2021-06-08 15:25:16 +02:00
xyzcal.cpp
Add LCD output during xyz calibration
2022-12-20 14:30:06 +01:00
xyzcal.h
Add LCD output during xyz calibration
2022-12-20 14:30:06 +01:00
fffb15cc81