3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
1,619 Commits 1 Branch 1 Tag 249 MiB
06ad6b70f8
Commit Graph

1464 Commits

Author SHA1 Message Date
Alessandro Ranellucci
430c825918 Align rectilinear and line infill across layers (new implementation). #712 2013-04-18 17:34:21 +02:00
Alessandro Ranellucci
bd3384525e Revert "Align rectilinear and line infill across layers. #712" 
This reverts commit a0a54ea706.
 2013-04-15 11:33:24 +02:00
Alessandro Ranellucci
a0a54ea706 Align rectilinear and line infill across layers. #712 2013-04-11 19:36:49 +02:00
Alessandro Ranellucci
c2aa119c09 Require Boost::Geometry::Utils 0.08 2013-04-09 14:03:24 +02:00
Alessandro Ranellucci
94ed6cd239 Always move Z at travel speed. #1093 2013-04-08 22:23:51 +02:00
Jesse Vincent
7ec6332141 split apart the math in nearest_point_index and short-circuit if we know the candidate is no good 2013-04-07 19:53:15 -04:00
Jesse Vincent
e8ca1e59a6 no functional change. only return from one place for clarity 2013-04-07 19:44:32 -04:00
Jesse Vincent
da0e67a891 Only look up $point's X and Y once, rather than once on every pass through the loop. 
(Those lookups are expensive)
 2013-04-07 18:28:08 -04:00
Jesse Vincent
3e8c5804fe Inline comparable_distance_between_points 
It was called on an incredibly hot codepath from a single place. At 12313276 calls
on my test .stl, the sub call overhead alone was a significant perf hit.
 2013-04-07 18:13:40 -04:00
Jesse Vincent
060d2da7fe Small optimization on an incredibly hot codepath. 2013-04-07 18:01:15 -04:00
Alessandro Ranellucci
7e51cbcf69 Allow 0.1mm slots. #959 #1056 2013-04-04 01:24:40 +02:00
Alessandro Ranellucci
b4be61b703 Bugfix: time estimates for cooling were computed for each object separately instead of the whole actual layer. #1071 2013-04-04 01:17:44 +02:00
Alessandro Ranellucci
a563801304 Merge branch 'master' of github.com:alexrj/Slic3r 2013-04-04 01:15:46 +02:00
Alessandro Ranellucci
3afeb5c7b5 Second layer commands were written multiple times 2013-04-04 00:52:11 +02:00
Alessandro Ranellucci
b725847a51 Bugfix: configuration wizard led to crash with simple mode. #1077 2013-04-03 19:26:59 +02:00
Alessandro Ranellucci
88e70a59c7 Don't wipe if option is disabled 2013-04-03 19:08:12 +02:00
Alessandro Ranellucci
d089d2b2d4 Bugfix: crash introduced by wipe 2013-04-03 19:06:33 +02:00
Devin Grady
e602aad998 inspired by f5e48a3, a seems to work to fix 1076 2013-04-01 22:12:51 -05:00
Alessandro Ranellucci
bf809d1fd0 Use linestring_length() from Boost 2013-03-31 19:50:22 +02:00
Alessandro Ranellucci
1187f4846d Some Clipper optimizations 2013-03-31 19:40:25 +02:00
Alessandro Ranellucci
0d6ff22e19 Merge branch 'wipe' 2013-03-31 11:36:04 +02:00
Alessandro Ranellucci
0e6d80d33c Bump version number 2013-03-31 11:24:33 +02:00
Alessandro Ranellucci
01e86c2615 Releasing 0.9.9 2013-03-30 15:59:17 +01:00
Alessandro Ranellucci
04d2231901 Bugfix: is_printable() wasn't discarding narrow ring-shaped top/bottom surfaces because it was only considering the contour. This caused extra shell material even in hollow prints. #1049 2013-03-30 11:22:12 +01:00
Alessandro Ranellucci
7f23e72a10 Display preview for small files too. #929 2013-03-30 00:52:45 +01:00
Alessandro Ranellucci
33a4ec660d better handling of too-small and too-short models #929. 
These changes handle small models better in the plater preview.
Extremely small thumbnails are preserved instead of culled,
allowing the model to be scaled up. The scale range is extended to
100000% to allow mm-scale objects expressed in meters to be opened
and scaled to mm.
Original coding by mesheldrake
 2013-03-30 00:47:13 +01:00
Alessandro Ranellucci
ac2356f66a Don't crash at the end of empty prints. #1042 2013-03-30 00:36:14 +01:00
Alessandro Ranellucci
7b7c9f6330 Launch even if config is corrupted. #1067 2013-03-30 00:30:21 +01:00
Alessandro Ranellucci
f5e48a306d Bugfix: support material and brim didn't work correctly. Includes unit test. #1074 2013-03-30 00:21:09 +01:00
Alessandro Ranellucci
d4119b0eb1 Better bridge direction detection. #1068 2013-03-29 23:49:58 +01:00
Alessandro Ranellucci
5beb2187d3 Bugfix: infill direction wasn't correctly alternated when infilling every 2 layers. #1068 2013-03-29 19:24:08 +01:00
Alessandro Ranellucci
1b79b1cb20 Refactoring: use the clone() method for inflating Surface objects 2013-03-29 19:18:06 +01:00
Alessandro Ranellucci
e563c62094 Replace SetValue with ChangeValue to avoid wxWidgets to fire useless events 2013-03-29 18:56:34 +01:00
Alessandro Ranellucci
d2b451d9a1 Merge branch 'master' into wipe 2013-03-26 16:28:01 +01:00
Alessandro Ranellucci
aae9625a13 Bugfix: solid-infill-below-area wasn't ignored when fill_density = 0, causing solid layers here and there. #1049 2013-03-26 15:47:40 +01:00
Alessandro Ranellucci
2f046799f2 Removed offset() method from Slic3r::Polygon because it only works with ccw polygons 2013-03-26 14:03:24 +01:00
Alessandro Ranellucci
4c41f6c462 Safer safety_offset() for ExPolygons 2013-03-26 13:57:37 +01:00
Alessandro Ranellucci
843a700e96 Fixes for wipe 2013-03-25 23:06:18 +01:00
Alessandro Ranellucci
4cb36fcbe2 Remove cooling checkbox from simple mode 2013-03-24 21:28:16 +01:00
Alessandro Ranellucci
6bc5de0b5d Allow custom ranges with layer_height = 0 2013-03-24 15:26:55 +01:00
Alessandro Ranellucci
b7cd362820 Remove scale from G-code comments 2013-03-19 19:16:13 +01:00
Alessandro Ranellucci
7ec6c6ffba Lower 0.5*w to 0.4*w to fill finer gaps. #1057 2013-03-19 16:08:19 +01:00
Alessandro Ranellucci
34b192fde3 Merge pull request #1059 from cakeller98/Universal_File_Visibility 
Added "known" as a valid model file type
 2013-03-19 08:05:19 -07:00
Alessandro Ranellucci
9c122bda5e Fix memory leak in avoid_crossing_perimeters. #1044 2013-03-19 16:02:03 +01:00
Alessandro Ranellucci
813aa5b307 Allow drag and drop for OBJ files 2013-03-19 12:25:10 +01:00
Alessandro Ranellucci
fd2a5e894a Respect perimeter/infill order when multiple extruders are configured but only one is used 2013-03-19 11:58:03 +01:00
Christopher Keller
8bbaafd830 Added "known" as a valid model file type 
=> 'Known files (*.stl, *.obj, *.amf)|*.stl;*.STL;*.obj;*.OBJ;*.amf;*.AMF;*.xml;*.XML',

When dialog pops up, it can see ALL known file types instead of only stl.
 2013-03-18 20:52:55 -07:00
Alessandro Ranellucci
ec5f0635f7 Add wipe in GUI 2013-03-18 21:20:32 +01:00
Alessandro Ranellucci
96f1b7ab57 Merge branch 'master' into wipe 2013-03-18 21:18:24 +01:00
Alessandro Ranellucci
1abd8c9a9e Remove the 'simplify' handle in ExtrusionPath after the recent refactoring. #1054 2013-03-18 18:03:14 +01:00
Alessandro Ranellucci
f0ac1c704e Fix test framework detecting dE=0 as retraction 2013-03-18 18:01:01 +01:00
Alessandro Ranellucci
0b81911cff Bugfix: artifacts near walls. #1049 2013-03-18 17:55:16 +01:00
Alessandro Ranellucci
8ce31c2a2b Don't exclude any infill under internal bridges; revert infill pattern to rectilinear for internal bridges. #240 2013-03-18 13:32:19 +01:00
Alessandro Ranellucci
7f917671ab Bugfix: horizontal projection for high-res models might show corrupted result 2013-03-17 15:39:51 +01:00
Alessandro Ranellucci
8d2c651ef2 $surface->thickness was erroneously defaulting to 1 mm 2013-03-17 14:58:10 +01:00
Alessandro Ranellucci
1064c9bb2a Merge branch 'master' into grow-narrow 
Conflicts:
	lib/Slic3r/Fill.pm
	lib/Slic3r/Print/Object.pm
 2013-03-17 02:30:20 +01:00
Alessandro Ranellucci
7de8b20bc4 New wipe feature 2013-03-17 02:22:50 +01:00
Alessandro Ranellucci
83065b0789 Bugfix: wrong flow and bad pattern rotation when infill-every-layers was set to an arbitrary high value 2013-03-17 01:10:40 +01:00
Alessandro Ranellucci
04c0caad0b Fix honeycomb infill overlap with perimeters 2013-03-17 00:57:58 +01:00
Alessandro Ranellucci
537fca47c5 Use solid infill speed for internal bridges; apply slowdown if any; don't use bridge fan settings. #240 2013-03-17 00:42:53 +01:00
Alessandro Ranellucci
700fee14aa Set honeycomb as default fill pattern, as it works better at low layer heights and makes stronger parts 2013-03-17 00:24:53 +01:00
Alessandro Ranellucci
c999d0c44f Set default value for first_layer_height to 0.35mm so that first_layer_extrusion_width = 200% works fine even when user sets layer_height to 0.1. A first layer height of 0.35mm works fine for both 0.35 and 0.5 nozzles so it should be fine for most users 2013-03-17 00:22:53 +01:00
Alessandro Ranellucci
78a4ae4835 Use full flow for sparse infill by default 2013-03-17 00:21:17 +01:00
Alessandro Ranellucci
35bd5a3423 New --solid-infill-extrusion-width option 2013-03-17 00:02:31 +01:00
Alessandro Ranellucci
c13d9e9fb3 Don't collapse overhangs too early 2013-03-16 21:51:38 +01:00
Alessandro Ranellucci
0f5064dd32 Untested fix for incomplete honeycomb support material. #1032 2013-03-16 21:10:12 +01:00
Alessandro Ranellucci
25554a345f Reorder object copies using a nearest neighbor search 2013-03-16 20:56:14 +01:00
Alessandro Ranellucci
cf5adca928 New --resolution option to simplify input models 2013-03-16 19:58:34 +01:00
Alessandro Ranellucci
10b6bc9d15 Removed keep_meshes 2013-03-16 19:39:00 +01:00
Alessandro Ranellucci
f4b8185698 Fixed typo preventing support material to work with new simplify() syntax 2013-03-16 19:11:49 +01:00
Alessandro Ranellucci
db2e76a0df New option to change perimeter order. #534 2013-03-16 18:56:49 +01:00
Alessandro Ranellucci
33b40eda18 Always fix self-intersecting polygons that Douglas-Peucker might return 2013-03-16 18:42:56 +01:00
Alessandro Ranellucci
0f8ca6191a Merge branch 'master' into grow-narrow 2013-03-16 16:22:03 +01:00
Alessandro Ranellucci
dc0f706789 Bugfix: simplification of support areas could lead to complex polygons with bad orientation, thus causing wrong pattern clipping. #1032 2013-03-14 14:27:08 +01:00
Alessandro Ranellucci
f528088d31 Merge branch 'master' into grow-narrow 2013-03-13 16:39:57 +01:00
Alessandro Ranellucci
9713b9f524 Fix narrow fills growing 2013-03-13 14:55:58 +01:00
Alessandro Ranellucci
0feef890b1 Use Class::XSAccessor 2013-03-13 01:29:45 +01:00
Alessandro Ranellucci
cab51d4581 One more slight optimization 2013-03-13 01:14:47 +01:00
Alessandro Ranellucci
a412291690 Little optimization 2013-03-13 01:07:06 +01:00
Alessandro Ranellucci
d9b82c79da Grow narrow infill regions into void - to be tested more 2013-03-13 01:03:54 +01:00
Alessandro Ranellucci
6058384978 Fixed regression causing crash when support material threshold angle was defined. #1048 2013-03-12 19:39:43 +01:00
Alessandro Ranellucci
5c1336d2de Clarify that min Z, max Z and layer height are supposed to be expressed in mm 2013-03-12 10:28:51 +01:00
Alessandro Ranellucci
a5e6340004 Workaround for HideRowLabels() missing in wxWidgets 2.8. #770 2013-03-11 20:00:12 +01:00
Alessandro Ranellucci
999af84c54 Don't make internal bridges when fill_density == 1. #1045 2013-03-11 18:41:12 +01:00
Alessandro Ranellucci
0df8398a39 Use concentric infill for internal bridges. #240 2013-03-11 18:38:32 +01:00
Alessandro Ranellucci
0eecf33198 Bugfix: narrow solid shells were collapsed when spacing was added before generating infill, so we grow them 2013-03-11 18:37:01 +01:00
Alessandro Ranellucci
b73c301c55 Bugfix: double lift at toolchange. #953 2013-03-11 17:06:05 +01:00
Alessandro Ranellucci
0326962d11 Merge branch 'new-extra-perimeters' 2013-03-11 14:24:02 +01:00
Alessandro Ranellucci
e809a5bdcc Added support for expolygons in Slic3r::SVG 2013-03-11 14:23:45 +01:00
Alessandro Ranellucci
b7945ac790 Finished new extra perimeters implementation 2013-03-11 14:23:16 +01:00
Alessandro Ranellucci
428cd7867d Missing bit 2013-03-11 12:47:27 +01:00
Alessandro Ranellucci
74e21d7a04 New implementation of extra perimeters - to test 2013-03-10 19:08:36 +01:00
Alessandro Ranellucci
964accb588 Typo 2013-03-10 19:07:41 +01:00
Alessandro Ranellucci
2942485a94 New option to make infill before perimeters. #1039 2013-03-10 18:15:44 +01:00
Alessandro Ranellucci
ab3d1ac820 Give priority to infill extruder if it was used last. #940 2013-03-10 17:40:19 +01:00
Alessandro Ranellucci
107f48d894 Reduce toolchanges by giving priority to last extruder on layer change. #940 2013-03-10 17:28:03 +01:00
Alessandro Ranellucci
dac168eff0 Do each island completely if avoid_crossing_perimeters is enabled. #278 2013-03-10 16:09:03 +01:00
Alessandro Ranellucci
f10a4787b2 Fix layer ordering when printing objects with different layer heights 2013-03-10 15:36:52 +01:00
Alessandro Ranellucci
f670acb4b1 Slice a single object with multiple layer heights. :-) 2013-03-10 14:58:49 +01:00
Alessandro Ranellucci
d1acc511b3 Refactor ObjectDialog into a tab panel 2013-03-10 12:46:54 +01:00