Alessandro Ranellucci
539cde8d7a
Raise the thickness threshold used for generating thin walls. TODO: don't enforce this at the segment level but consider the average thickness of an entire polyline and compare it to the total length. #2910
2015-06-15 17:00:10 +02:00
Alessandro Ranellucci
38a9e32a28
Limit bridge over sparse infill to areas that can absorb such extrudate. #2899
2015-06-13 19:48:46 +02:00
Alessandro Ranellucci
7a34078f5f
Bump version number
2015-06-13 11:42:37 +02:00
Alessandro Ranellucci
4a91ea817a
Releasing 1.2.8
2015-06-09 17:18:43 +02:00
Alessandro Ranellucci
e715974688
Better validation for speeds (prevent 0mm/s travel speed). #2893
2015-06-09 17:15:01 +02:00
Alessandro Ranellucci
911bed827c
Fixed regression in STL parser. #2886
2015-06-09 14:54:52 +02:00
Alessandro Ranellucci
7b65a35519
Always limit volumetric speed with Max Volumetric Speed (not just when using autospeed). #2810
2015-06-02 11:54:38 +02:00
Alessandro Ranellucci
1fcfdf4718
Added a couple full_label values
2015-06-01 23:22:44 +02:00
Alessandro Ranellucci
6095427926
Fix admesh's STL parser in order to make it more tolerant for broken STL files having multiple 'solid' definitions. Still not the ideal STL parser, but handles the cases that were reported so far. #2471 #2842
2015-06-01 19:49:52 +02:00
Alessandro Ranellucci
f14c0e2183
Bugfix: concave starting points were not correctly detected for slice holes. Includes regression test. #2857
2015-06-01 17:55:51 +02:00
Alessandro Ranellucci
fbea32a81c
Prevent writing empty materials to AMF files. Also add a note about material-id = 0 being reserved by AMF spec. #2871
2015-06-01 11:51:00 +02:00
Alessandro Ranellucci
7f70da97b4
New experimental autospeed feature. #2810
2015-05-31 22:04:32 +02:00
Alessandro Ranellucci
aa8b6afe8b
Assign color to filaments
2015-05-26 02:01:43 +02:00
Alessandro Ranellucci
a547645e86
Bump version number
2015-05-24 23:29:59 +02:00
Alessandro Ranellucci
249a48d68d
Releasing 1.2.7
2015-05-24 17:39:27 +02:00
Alessandro Ranellucci
31e0fc7f17
Fixes and improvements to thin wall detection. #2829
2015-05-22 01:46:01 +02:00
Alessandro Ranellucci
70ec433e67
Faster (but less precise) implementation of simplify_by_visibility(), since it was the bottleneck of avoid_crossing_perimeters. #2777
2015-05-18 19:28:59 +02:00
Alessandro Ranellucci
97211f35e7
More robust medial axis pruning. #2800
2015-05-13 20:50:30 +02:00
Alessandro Ranellucci
0d01348acc
Use radians everywhere, including ModelInstance::rotation
2015-05-03 18:40:00 +02:00
Alessandro Ranellucci
79ce094e3a
Bugfix: splitting a rotated object resulted in wrong positions. #2772
2015-05-03 18:28:39 +02:00
Alessandro Ranellucci
7d81aee62f
Added the [scale] placeholder. #2791
2015-05-02 21:59:15 +02:00
Alessandro Ranellucci
bf541a1fed
Refactoring in PlaceholderParser
2015-05-02 21:43:22 +02:00
Alessandro Ranellucci
a16dda0885
Bugfix: changes to the resolution config option didn't trigger reslicing. #2795
2015-04-29 19:22:44 +02:00
Alessandro Ranellucci
d6d7880507
Ported Slic3r::Geometry::arrange() to C++/XS
2015-04-29 19:19:07 +02:00
Alessandro Ranellucci
5eb3bc52ef
Ported ModelObject::rotate() and ModelObject::flip() to XS, as well as axes constants
2015-04-16 21:22:04 +02:00
Alessandro Ranellucci
be2f46ca68
Ported Layer::merge_slices() to XS
2015-04-16 20:44:55 +02:00
Alessandro Ranellucci
1f8ef2a63c
Fixed regression introduced by the recent PerimeterGenerator refactoring causing spiral vase not to be correctly skipped on multi-loop layers. Includes regression test. #2761
2015-04-12 20:16:27 +02:00
Alessandro Ranellucci
8654537e55
Use support material layer height for raft layer instead of object layer height. #2723
2015-03-09 19:36:23 +01:00
Alessandro Ranellucci
d8ee9dd5f5
Limit first object layer height correctly when using a larger support material extruder. #2722
2015-03-09 19:27:57 +01:00
Alessandro Ranellucci
6cab5668e3
Restore correct ordering of concentric infill loops, preventing them from being reordered during G-code generation
2015-03-09 18:28:07 +01:00
Alessandro Ranellucci
095391d702
When using raft, validate first layer height against support material extruder only instead of taking other extruders into account, thus potentially allowing larger nozzles to be used for it. #2701
2015-03-06 21:35:00 +01:00
Alessandro Ranellucci
722e94513c
Refactoring: removed the non-idempotent init_extruders() step. Also, infill_extruder was not limited to the available number of extruders when slicing from the plater, and support material extruder was considered also when support material was disabled
2015-03-06 09:56:58 +01:00
Alessandro Ranellucci
1ab8efba7f
Fixed regression causing random failures in bridge direction detection. #2636
2015-02-27 21:55:02 +01:00
Alessandro Ranellucci
e88cf466fe
A couple notes about infill_only_where_needed
2015-02-23 00:55:00 +01:00
Alessandro Ranellucci
2655f3f816
Better and more robust implementation of infill_only_where_needed
2015-02-23 00:44:51 +01:00
Alessandro Ranellucci
2eca094170
Added failing test case for Clipper regression causing extra points in polyline intersection, thus crash with circular bed shape
2015-02-22 17:03:23 +01:00
Alessandro Ranellucci
edbc11477c
Update to Clipper 6.2.9. Fixes #2639
2015-02-22 15:13:52 +01:00
Alessandro Ranellucci
6413d5dcba
Merge pull request #2630 from lordofhyphens/fix-admesh-warning
...
Fix a warning about unused return value when using freopen in admesh.
2015-02-22 14:48:17 +01:00
Alessandro Ranellucci
ba6ae12635
Change end_program() to postamble()
2015-02-15 17:09:17 +01:00
Alessandro Ranellucci
1180a6d83f
Merge pull request #2508 from strahlex/machinekit-gcode
...
added support Machinekit flavour GCode
2015-02-15 17:00:08 +01:00
Alessandro Ranellucci
8851dc7f23
Added failing test case for upstream Clipper issue 126 (our #2639 )
2015-02-15 16:47:55 +01:00
Alessandro Ranellucci
32b8eb489c
Updated Clipper to 6.2.8. This fixes several minor issues, including infill paths not being trimmed correctly. #2448
2015-02-15 16:10:04 +01:00
Kent Fredric
df5c2a6f11
Remove redundant dep on ExtUtils::Typemap
...
Typemap (Singluar) version 1.00 is essentially identical to Typemaps (Plural)
Typemap is literally a dumb subclass of TypeMaps, and so this
dependency simply gives an extra installation requirement that does
nothing.
2015-02-14 06:44:22 +13:00
Alexander Rössler
cef1494852
Switched to P parameter instead of S for Machinekit flavour MCode commands
2015-02-10 14:22:23 +01:00
Alessandro Ranellucci
a68fed3938
Bump version number
2015-02-09 10:53:55 +01:00
Alexander Rössler
f2fa8cb63f
added end_program() function to GCodeWriter
2015-02-07 12:36:29 +01:00
Alexander Rössler
32eff40422
added retract and unretract command for Machinekit flavour
2015-02-06 19:16:57 +01:00
Alexander Rössler
d35226b889
added support Machinekit flavour GCode
2015-02-06 18:48:46 +01:00
Joseph Lenox
102785d154
Fix a warning about unused return value when using freopen in admesh. Added another NULL check for safety.
2015-02-05 00:58:27 -06:00
Alessandro Ranellucci
73eb11b395
Releasing 1.2.6
2015-02-01 15:47:29 +01:00
