3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
4,450 Commits 1 Branch 1 Tag 249 MiB
9c1b1829cf
Commit Graph

1314 Commits

Author SHA1 Message Date
bubnikv
9c1b1829cf PerimeterGenerator - a bit of refactoring for readability. 2017-07-19 15:42:49 +02:00
bubnikv
81823fe7df Reduced the content of Geometry.pm, removed unused Perl subroutines. 
Reduced the use Slic3r::Geometry and use Slic3r::Geometry::Clipper
clauses to only reference used subroutines.
 2017-07-19 10:45:39 +02:00
bubnikv
2c82a327dd Fix of "Wipe Tower ... only supported ... .4 nozzle" error when slicing 
a non .4mm nozzle single extruder (Stock MK2S) print
https://github.com/prusa3d/Slic3r/issues/426

The constraint for the "Wipe Tower" checkbox has been raised, so
one will get this error message only if the printer settings has more
than one extruder configured, as the wipe tower does not get generated
for a single extruder print.
 2017-07-17 09:07:18 +02:00
bubnikv
ed73f0b6ef Fix of "Modifier meshes don't work for speed modifications" 
https://github.com/prusa3d/Slic3r/issues/298
 2017-07-14 17:30:54 +02:00
bubnikv
40a882d01e Experimental feature, which may make the Clipper offsets run faster 
due to avoiding the 128bit multiply operations:
A filtered predicate is tried to calculate SlopesEqual()
to minimize the invocation of 128bit multiply operations.
 2017-07-13 15:52:19 +02:00
bubnikv
bd93d2f334 Fix of "Cooling fan problem Slic3r 1.35.5.16 " 
https://github.com/prusa3d/Slic3r/issues/418
This is a regression of the cooling buffer changes done for multi-material
(supporting different cooling settings for different filaments)
 2017-07-13 12:11:00 +02:00
bubnikv
c159165780 A bit of clean-up in GCode.cpp 2017-07-11 11:42:55 +02:00
bubnikv
c52c31a855 A bit of clean-up in FillRectilinear2.cpp 2017-07-11 11:42:21 +02:00
bubnikv
c7d16699a4 When setting an override extruder in the Object Settings dialog, 
don't apply this extruder to supports. This did not make sense
as the new "don't change tool (0)" extruder choice fits well for non-soluble
and the soluble supports should not be overriden as well.
 2017-07-11 11:41:23 +02:00
bubnikv
41f50b246c Inlined Surface::any_internal_contains / any_bottom_contains 2017-07-10 13:15:36 +02:00
bubnikv
7c1350d007 Fixed "Too much support generated for buildplate only supports" 
https://github.com/prusa3d/Slic3r/issues/359
 2017-07-07 18:06:41 +02:00
bubnikv
774c69e3c6 Fix of "Problem with larger brim overlapping " 
https://github.com/prusa3d/Slic3r/issues/373
 2017-07-07 16:40:23 +02:00
bubnikv
434f538919 Fix of soluble interface / non-soluble support: 
The non-soluble support with "don't care" extruder will preferably
be printed with a non-soluble extruder, if possible without a tool change.
 2017-07-07 13:22:00 +02:00
bubnikv
abcd746774 Fix of 
Overhang threshold not utilized after 1.34.1
https://github.com/prusa3d/Slic3r/issues/360

"Overhang threshold" and "Enforce support" don't work
https://github.com/prusa3d/Slic3r/issues/273
 2017-07-07 10:45:39 +02:00
bubnikv
e78839d2fc Fixed a regression after porting GCode generator to C++ 
Not lifting extruder after printing complete individual objects
https://github.com/prusa3d/Slic3r/issues/400
 2017-07-05 11:58:00 +02:00
bubnikv
0ad4e9d51f Refactored the cooling buffer: Removed ElapsedTime. 2017-06-30 20:01:32 +02:00
bubnikv
bf9027ff2d Fix of a cooling buffer over multiple extruders. 2017-06-30 19:07:14 +02:00
bubnikv
115deee252 FLT_MAX strikes again 2017-06-30 17:14:13 +02:00
bubnikv
1158ce41df Finalized implementation of a cooling buffer for multiple extruders 
with different settings.
 2017-06-30 17:05:58 +02:00
bubnikv
ab21a253e0 Hopefully finally fixed reordering of the multi-material parts. 2017-06-26 16:44:16 +02:00
bubnikv
8160db23cc Implementation of "XY size Compensation for first layer" 
https://github.com/prusa3d/Slic3r/issues/190
 2017-06-26 16:28:10 +02:00
bubnikv
32fa84c5a5 Fix of https://github.com/alexrj/Slic3r/issues/4043 , thanks to @lordofhyphens. 
Further refactoring of the cooling logic to collect per extruder data.
 2017-06-23 10:13:09 +02:00
bubnikv
39b9341359 Include the wipe tower print time into the cooling time. 
Further refactoring of Extruder class.
 2017-06-22 15:18:37 +02:00
bubnikv
0454cc95f9 Ported the cooling changes from @alexrj: Don't slow down the external 
perimeters if not necessary, don't take the bridging time into account
when slowing down the print.

Removed Extruder & GCodeWriter Perl bindings.
Improved Extruder for constness.
Refactored GCode::m_elapsed_time to struct ElapsedTime.
 2017-06-22 12:59:23 +02:00
bubnikv
c1146e298b Set the bed temperature based on the active extruder settings. 
https://github.com/prusa3d/Slic3r/issues/157
 2017-06-21 17:45:55 +02:00
bubnikv
f0325575c2 Slic3r has been modified to propagate the following filament specific 
values to GCode generator, one per active extruder:

bed_temperature
bridge_fan_speed
cooling
disable_fan_first_layers
fan_always_on
fan_below_layer_time
first_layer_bed_temperature
max_fan_speed
min_fan_speed
min_print_speed
slowdown_below_layer_time

Now it remains to extend Slic3r to correctly apply these values.
 2017-06-21 16:15:39 +02:00
bubnikv
0bd2bb1e8e Compilation issue on Linux & OSX 
https://github.com/prusa3d/Slic3r/issues/368
 2017-06-21 14:12:11 +02:00
bubnikv
b12e4689e8 Fix of changing the order of volumes of a multi-volume part: 
The 3D preview scene was not updated properly.
 2017-06-21 14:10:22 +02:00
bubnikv
7ca02bda0f Fix of a "split" function issue. 
1) Load a multi-part stl
2) Rotate it by 90 degrees
3) Split it.

Before this fix, the split object jumped away from the print bed.

This sound similar to
https://github.com/prusa3d/Slic3r/issues/309
 2017-06-19 14:26:19 +02:00
bubnikv
cb43f19a90 Fixed a variable layer height profile update issue. 
https://github.com/prusa3d/Slic3r/issues/358
 2017-06-15 20:15:53 +02:00
bubnikv
b724d789fd New feature: Splitting an object into a multi-part volume. 2017-06-15 15:38:15 +02:00
bubnikv
a1f6403463 Fix of a wipe tower - wipe tower shrinking by the amount of material 
wiped into the zig-zag pattern.
 2017-06-15 10:53:37 +02:00
bubnikv
b8369ab19a gcc and clang did not like throwing std::exceptions with a cstring arugment 2017-06-14 20:33:20 +02:00
bubnikv
2ac981e422 Improved error handling when importing configuration from a G-code. 2017-06-14 20:18:46 +02:00
bubnikv
f7334f58d3 Finalized the config import from a G-code. 2017-06-14 18:53:11 +02:00
bubnikv
93dce7a2d3 Ported config load / stored to C++, thanks @alexrj 
Implemented import of config values from the G-code.
 2017-06-14 17:51:14 +02:00
bubnikv
c61e098066 Integrated the not yet accepted boost::nowide library, thanks @alexrj. 2017-06-14 16:24:49 +02:00
bubnikv
c431bf5982 Fixed missing default_region_config values exported into the g-code. 2017-06-14 15:16:43 +02:00
bubnikv
8a2a9abbd4 Fix of "Raft and support dont work together" 
https://github.com/prusa3d/Slic3r/issues/314
There was an issue with raft & soluble support.
Also there was a bug, where the support was not generated correctly
after a change of the support Z gap.
 2017-06-13 19:29:15 +02:00
bubnikv
6cb7583756 Reverted the "set_and_wait_temperatures" configuration to match 
the behavior of the @alexrj slic3r.
 2017-06-13 13:46:04 +02:00
bubnikv
f7831240e1 Fixed compilation on OSX 2017-06-13 12:09:49 +02:00
bubnikv
a4992602ee Auto arrange: Do at least something if the objects do not fit the bed. 
Thans @alexr
https://github.com/prusa3d/Slic3r/issues/336
 2017-06-13 11:43:25 +02:00
bubnikv
5cae4cc614 Fix of https://github.com/prusa3d/Slic3r/issues/285 
Refactored Model.cpp/hpp to C++x11 loops,
simplified the mesh / bbox handling.
 2017-06-13 11:35:24 +02:00
bubnikv
21ddcb8487 Fix of a layer height test to allow / disable the wipe tower. 2017-06-12 14:33:33 +02:00
bubnikv
f408f08850 Disabled the new Slic3r version check until we have a server set up 
for the Slic3r Prusa Edition.

Hopefully a fix of https://github.com/prusa3d/Slic3r/issues/258
by moving the 2D thumbnail generation to the main thread and
forcing the simple 2D convex hull for even the small objects.
 2017-06-12 14:25:35 +02:00
bubnikv
881a5c531b Fix of the last commits: 
1) FLT_MAX replaced with limits,
2) apply_config is called by the test case harness to update layer height profile.
 2017-06-09 14:24:00 +02:00
bubnikv
958c6553e7 Hopefully a fix of 
"Layer editing does not trigger reslicing with Background Processing enabled"
https://github.com/prusa3d/Slic3r/issues/293
 2017-06-09 13:27:35 +02:00
bubnikv
2bbcd49278 Fix of a crash in pressure equlizer filter. 
https://github.com/prusa3d/Slic3r/issues/339
 2017-06-08 20:28:21 +02:00
bubnikv
dd41406a55 Fixed regression in invalidation of slicing steps. 2017-06-08 17:46:28 +02:00
bubnikv
89dcd3e8b1 Implemented raft support for the wipe tower 
https://github.com/prusa3d/Slic3r/issues/324

Implemented a correct layer height preview for the wipe tower layers,
if the wipe tower layer height is not constant due to the application
of raft.
 2017-06-08 16:58:29 +02:00