PrusaSlicer newly registers by Windows operating system for HID USB
plug / unplug notifications and for Volume attach / detach notifications,
and the background threads of the two respective services are waken up
on these Windows notifications.
The RemovableDriveManager also wakes up every 30 seconds to cope with
the drives ejected from Windows Explorer or from another application,
for example Cura, for which Windows OS does not send out notifications.
These images are newly stored inside the resources/profiles/VENDOR_NAME/,
they should be named by the printer_model identifier suffixed with
"_thumbnail.png"
All the existing printer thumbnails were moved and renamed,
thumbnails for the 3rd party printers were added, marked as Beta.
system call to the command line utility and send out the unmount
wxWidgets event immediately.
Hopefully improves 2.2.0-RC Eject is very slow in Linux (#3795)
This crash was caused by the RemovableDriveManager and 3DConnexion
detection services not being stopped correctly.
The fix executes all the tasks of the MainFrame at the language switch,
that are normally performed on application shut down.
1) On Windows and Linux, the device enumeration now runs at a background
thread, while it ran on the UI thread on idle, which may have been
blocking on some rare Windows setups, see GH #3515#3733#3746#3766
2) On OSX, the device enumeration now relies on OS callback, no
polling is required.
3) Refactored for cleaner interface.
1) On Windows and Linux, polling of removable drives is done at a background
thread, not at a UI thread.
2) On OSX, there is no polling, but a OS notification callback.
3) Refactored for clarity of the RemovableDriveManager interface.
* the editing of extruder color from PresetComboBox,
when incompatible filament preset is selected and red flag is shown.
*OSX specific bug : empty icons for PresetComboBox had non-scaled width
1. "Revert" buttons on the bar don't work for a "Compatible printers" and a "Compatible prints profiles".
And cause a crash if they are pressed in Print(SLA) Settings.
2. A label of a "Compatible printers" option is always black in Filament(Materials) Settings Tab
- Deleted redundant whitespaces before semicolons.
- All "\t" extracted from the phrases (The PhraseApp used to the translations "doesn't see" it, and as a result all translations missed them)
The wxString saga continues. wxWidgets 3.0 don't have the wxString::FromUTF8(const std::string&) overload, we must use the GUI::from_u8 helper
Also wxWidgets 3.0 don't allow to disable wxString->const char* conversion, so calling show_info(wxWindow*, wxString, const char*) was ambiguous
Several includes moved around
the "renamed_from" property of current profiles was not taken into account.
This lead to a situation where there were no MMU or SLA materials installed
after upgrade from PrusaSlicer 2.2.1 to 2.2. This should work now.
to avoid a column narrowing after a recreating of an application caused by a language changing)
+ Fix related to a bug, reported in #3617, about wrong placement of a "Purging volumes" button
translated to the some languages
The showing/hiding block cannot depend on whether the mesh was recently updated.
It would then not hide the supports and pad, which are calculated later than the hollowed mesh.
If the clipping plane is moved automatically after hollowed mesh was created, move the clipping plane and fix current direction so it is not reset when user wants to move it
This is a quick solution for the 2.2.0 release. It should be later refactored as mentioned in the code.
and the "show incompatible profiles" option.
It was not able to select the incompatible Print profile, which is
possible now.
(see Cannot select incompatible printer profile #3715)
When the Printer profile derived from the Prusa3D system profile was
active or a system Prusa3D profile was active, and when the Print profile
with the removed "inherits" field was active (or any other profile
derived from the "-- default --" profile was active), then the filament
selector offered just the profiles with the removed "inherits" field
(or any other profile derived from the "-- default--") profile.
This behavior has been now changed, so that in this scenario the Filament selector
will offer the Prusa3D vendor profiles compatible with the active Print
and Printer profile as well as the user profiles.
Slicer was also changed to keep an incompatible preset selected
at its respective tab if its respective "Red flag" is enabled.
For example, if an incompatible Print preset is selected and a Printer
profile is switched to another one which is not compatible with the active
Print preset that was red already, the active Print preset is
not switched if the Print "Red flag" is active. However, if the Print profile
was compatible before the Printer profile is switched and now the Print
profile becomes incompatible, another compatible Print profile is selected.
A likely bug in wxWidgets was worked around when switching a Print preset
on Plater, if the last item in the Print preset was active and incompatible,
and another Print preset was selected by the user. On Windows, an CBN_EDITCHANGE
is sent just after combo box selection change event and the CBN_EDITCHANGE
holds an index of the combo box item, which will be removed by the 1st event,
therefore leading to an assert in wxWidgets on CBN_EDITCHANGE. The workaround
is to disable processing of CBN_EDITCHANGE on Windows for the Plater
preset selection combo boxes.
