Commit Graph

16926 Commits

Author SHA1 Message Date
Vojtech Bubnik
539e80e890 Fix of supports create overkill material that actually sopports nothing above it. #2245
When expanding the 1st layer support layer, do it by small steps while
trimming with object to avoid supports to leak through object walls.
2021-02-24 19:49:38 +01:00
Vojtech Bubnik
34417574f5 Fix of Perl combine infill unit test after a change in raft:
1st object layer over raft is no more printed with bridging infill.
2021-02-24 18:48:55 +01:00
Vojtech Bubnik
e9875f57a9 Fix of Unnecessary raft on models with large perimeter but nothing inside. #430
Don't fill in the holes in 1st layer of the raft.
The user may apply a higher raft_expansion if one wants a better 1st layer adhesion.
2021-02-24 18:08:32 +01:00
Vojtech Bubnik
6bdd42b1cf Fix of Support interface is generated across whole print layer regardless if it's needed or not #4570
Disabled a suspicious piece of legacy code inherited from Slic3r,
which tries to fill in spots inside support interfaces. The code was
too aggressive and it was doing more harm than good.
2021-02-24 17:34:51 +01:00
Vojtech Bubnik
61a5b43ac3 Fix of Add option to change support interface pattern #1197
New config field for switching the support interface pattern between
default (rectilinear for non-soluble interface, concentric for soluble interface),
explicit rectilinear and explicit concentric.

Also the config layer was reworked a bit to reduce some switch statements
on ConfigOptionEnum<> templates.
2021-02-24 15:59:18 +01:00
YuSanka
88bd189047 Some code refactoring follow-up 33aa6be7b7 and 92b1302a08 2021-02-24 15:50:18 +01:00
YuSanka
18ac892ed6 OSX specific: Fix of f11e81517d 2021-02-24 15:03:34 +01:00
YuSanka
d209c92c80 Merge remote-tracking branch 'origin/ys_auto_cp' 2021-02-24 14:33:31 +01:00
enricoturri1966
33aa6be7b7 Follow-up of 86d7e1fb90 -> Validation of custom g-code added using vertical slider in preview 2021-02-24 14:17:46 +01:00
Vojtech Bubnik
aee136cedd Squash merge of pull request Raft enhancements #6003
thanks @nemart69
2021-02-24 11:59:22 +01:00
enricoturri1966
255b23f0fc Added missing include 2021-02-24 11:31:08 +01:00
enricoturri1966
e44c1006d5 #6117 - Allow import of gcode files processed by ArcWelder 2021-02-24 09:46:42 +01:00
David Kocik
dfae147a15 Merge branch 'dk_instances' 2021-02-24 09:32:28 +01:00
David Kocik
15d9751919 Delete lockfile at shutdown on linux and mac.
Passing lockfile on mac by sending message .
2021-02-24 09:31:51 +01:00
David Kocik
19f849a6d9 Merge branch 'dk_wizard' 2021-02-24 09:22:30 +01:00
David Kocik
8ca225b38a config wizard - hide logo if small height 2021-02-24 09:21:40 +01:00
Vojtech Bubnik
fcb714cd24 Added a single perimeter to the first layer of support or raft.
Fixes [Request] Add optional perimeter to raft #756
Fixes First support layer does not stick to bed #2101

New parameters raft_first_layer_density and raft_first_layer_expansion
to influence the 1st layer of raft or support.
Fixes Allow to disable raft under support structures. #3772
Fixes raft is larger than necessary #2568
Fixes Supports on the build plate should have a solid bottom interface for better adhesion #1165

Changed the 1st layer infill to rectilinear even for soluble materials.
Fixes first layer of support for multi filament support oddly spaced #1445
Fixes Full Soluble Materials interfacing into Models + Soluble material noise on Bed #684
2021-02-24 08:48:40 +01:00
Lukáš Hejl
77d007c484 Fixed calculation of a distance from begin of a contour in the avoid crossing perimeters.
The total length of a contour was incorrectly computed, which could cause the longest detour was selected instead of the shortest one in some cases.
2021-02-23 20:56:36 +01:00
Lukáš Hejl
dc576b0511 Fixed inner offset in the avoid crossing perimeters.
Minimum contour width was used incorrectly, which could lead to breaking contour to more disconnected polygons.
2021-02-23 20:43:34 +01:00
Lukáš Hejl
e123dfa8a4 Fixed wrong orientation of infill and gap-fill extrusion.
When an island contains exactly one infill ExtrusionEntity, this extrusion was oriented to maximize travel distance from the end of the previous extrusion of perimeters instead of minimizing it.
2021-02-23 20:07:40 +01:00
Pascal de Bruijn
9b7621dc7e creality.ini: double digit layer height (cosmetic) 2021-02-23 20:06:55 +01:00
Pascal de Bruijn
f9b4bbb016 creality.ini: more accurate extruder_clearance for Ender-3
radius = 47mm = 45mm carriage (including bltouch upgrade)
              +  2mm safety margin

height = 34mm = 30mm nozzle
              +  2mm bltouch probe pin
              +  2mm safety margin
2021-02-23 19:53:30 +01:00
Pascal de Bruijn
b06030f2bc creality.ini: allow slightly steeper unsupported angles 2021-02-23 19:23:35 +01:00
YuSanka
ad55756257 Implemented Auto Color Print 2021-02-23 18:46:05 +01:00
Vojtech Bubnik
d2c46025c7 Fix of Enforce support for first N layers has no effect #470 2021-02-23 15:31:21 +01:00
Vojtech Bubnik
055d2321e7 Trimming support base layer with brim.
Fixes Brim destroyed by support aka. Enable supports on top of brim #1156
Fixes Brim Priority/Support on Brim #713
Fixes Phantom Support columns interfere with brim #3396
Fixes false generation of brim when supports are used #3395

This is a work in progress, as the brim generator currently produces
different brim areas from what the support generator expects.
2021-02-23 14:43:47 +01:00
Vojtech Bubnik
8ba230db9f Fix of Paint on support ignores some paints. #5948
When projecting the horizontal or nearly horizontal support enforcers or blockers
into object layers, the projection may fall on a layer above or below the layer
where it should in case the nearly horizontal support enforcer or blocker
triangles are intersecting the slicing plane of one of the object layers.
Due to numerical issues, projection of the support blocker or
enforcer triangles may not fall to the same side of the slicing plane
as when slicing the object. To make the projection robust, horizontal triangles
are newly projected to both the layer below and above if they are close
to the object slicing plane.
2021-02-23 12:30:15 +01:00
enricoturri1966
e1c201e714 Partial revert of 204714d566 -> Alternate fix for crash on printer presets switching between MM and SM printers 2021-02-23 12:00:23 +01:00
rtyr
49f7d11940
INAT bundle
https://github.com/prusa3d/PrusaSlicer/pull/6112
2021-02-23 10:26:21 +01:00
YuSanka
671efb02c9 Fix of #6110 - Preview: View Menu/List placement incorrect
Use wxComboBox with wxCB_READONLY flag instead of wxChoice
2021-02-23 10:04:43 +01:00
Felicia Hummel
c6d4c85ac4
Note regarding absolute paths (#6111) 2021-02-22 20:56:00 +01:00
Vojtech Bubnik
7b52dc2324 Fixing build on gcc/clang 2021-02-22 19:43:18 +01:00
YuSanka
03dee86071 ObjectList: After deleting volumes from the object, update the extruder color for the object from the last and only volume 2021-02-22 18:50:38 +01:00
Vojtech Bubnik
032df7f18f PNGReadWrite: png::write_gray_to_file(), png::write_gray_to_file_scaled() 2021-02-22 18:07:27 +01:00
Vojtech Bubnik
3985d7bb81 Fixes Support Interface printed on air #2903
Fixes Supports generated loose in space #4874
Fixes Support Interface layers in midair #5016
2021-02-22 18:07:27 +01:00
Vojtech Bubnik
d2ca4563e8 Extended SVG::export_expolygons() with legend. 2021-02-22 18:07:27 +01:00
YuSanka
204714d566 Fix a crash on printer presets switching between MM and SM printers:
1. DoubleSlider::Control : Update extruder colors before another updates for layers slider
2. GCodeViewer : Control count of extruders during the legend updating
2021-02-22 17:08:03 +01:00
YuSanka
f11e81517d PresetComboBox: Fixed thin/wide_space_icon_width scale
+ Added border for the color_extruder bitmaps
2021-02-22 17:08:03 +01:00
Lukas Matena
3fd36f08e0 Show a notification when attempting to slice during SLA support points editing
This should also fix #5736 and a similar crash when deleting an object during manual editing (which was introduced between 2.2.0 and 2.3.0)
2021-02-22 16:26:16 +01:00
Lukas Matena
1904b7b904 Bugfix: custom seam did not work for triangles that were exactly vertical
The projection algorithm was originally made for custom supports, so vertical triangles
were not interesting. They are for seam. Instead of rewriting the algorithm and risking
more bugs, the edge case is detected and the triangle is tilted slightly.
2021-02-22 16:26:16 +01:00
Lukas Matena
bd2cbea202 Fix aligned seam when sequential printing is enabled 2021-02-22 16:26:16 +01:00
enricoturri1966
613f961b9f #6095 - Fixed toolpaths generation 2021-02-22 15:27:40 +01:00
tamasmeszaros
9092033bea Eliminate libnest2d warning on mac 2021-02-22 13:08:24 +01:00
rtyr
1dce483bc9
Thumbnails for CR8 and Ender4 2021-02-22 12:52:26 +01:00
YuSanka
791c191ea7 Fix of #6094 - Slicer crashes in MMU2S mode 2021-02-22 09:56:23 +01:00
rtyr
5506465f27
Creality index update 2021-02-22 09:24:52 +01:00
rtyr
39ba24abd7
Updated version 2021-02-22 09:23:58 +01:00
rtyr
4eb66ae124
Merge pull request #6079 from pmjdebruijn/creality_5
Creality Various
2021-02-22 09:23:14 +01:00
enricoturri1966
92b1302a08 Follow-up of 86d7e1fb90 -> Custom gcode validation in Filament settings tab 2021-02-22 08:39:36 +01:00
enricoturri1966
9b0b0f5e27 Follow-up of 86d7e1fb90 -> Custom gcode validation in Printer settings tab 2021-02-22 08:13:48 +01:00