Don't merge classified pieces of layerm->slices, but use the non-split
islands of a layer. For a single region print, these shall be equal.
Added Slic3r-console.ico windows icon for the console Slic3r.
This is a copy of the big icon, with the big images stripped off.
These could be calculated from the fill areas if needed.
On the other side, the non-classified (non-split) fill areas are stored
now for use in the "ensure vertical wall thickness" feature,
also the non-split fill areas are re-used when recalculating the infills.
This is safer than trying to stitch the fill region together from the
classified fragments.
Modified the "ensure vertical wall thickness" feature to use the non-split
fill areas instead of perimeter areas for the calculation
of non-supported regions. This is cheaper as the fill areas contain
roughly half the edges.
Visual Studio 2013. Added multiple compile time checks for data
sizes and alignment. The library STL import is not big endian safe, so
added a test for endianity, modified STL export to a faster little endian only.
slightly by inflating the projected top/bottom/bottom bridge surfaces
before they are added into a surface. This ensures, that the possible
projected infill areas merge with the perimeter supporting areas,
but the perimeter supporting areas will not be inflated on their own,
if there is no touching projection of a top/bottom/bottom bridge
surface.
Fixed some cracks in the fill surfaces created by rounding all surfaces inside detect_surface_type().
Fixed https://github.com/prusa3d/Slic3r/issues/12
Bridging-Angle not optimal
Extended the "Ensure veritcal wall thickness" mode (merged with the original discover_horizontal_shells function), but this a work in progress. Already Slic3r with "ensure vertical wall thickness" produces less spurious infills inside solids.
Crashes while switching in preview through layers with arrow keys
Also added a check box to visualize a single layer only
in the 3D path view. The check box may be toggled with a 'S' key.
Added shift+U / shift+D buttons in the 3D path view to show a single
layer only.
will force the perl confess / croak called from a C++ code to
print an error message and exit. There is a bug in some Strawberry
Perl instalations leading to an interpreter hang up and an exit
with a reasonable message is better than that.
direction over multiple regions. This allows a single bridge to be
drawn over holes, which are too close to each other to allow
for separate bridges.
Fixes Bridging-Angle not optimal
https://github.com/prusa3d/Slic3r/issues/12
Re-allowed adaptive infill line width for solid infills. The adaptive
infill line width works in some circumstances, see Issue #15,
but the original implementation often changed the line width too
aggressively. The current implementation limits the line width change
to 20%.
Fixes Gaps between infill and perimeter leads to errors in laydown on following layer
https://github.com/prusa3d/Slic3r/issues/15
