Alessandro Ranellucci
|
f1922ce7b3
|
Fix regression causing lack of contact infill
|
2013-08-12 19:19:22 +02:00 |
|
Alessandro Ranellucci
|
e5fe04ea7a
|
Make sure teeth are not too tight
|
2013-08-12 19:10:40 +02:00 |
|
Alessandro Ranellucci
|
9513fa7600
|
Enforce some horizontal margin between object and interface/support (contact not affected)
|
2013-08-12 18:55:11 +02:00 |
|
Alessandro Ranellucci
|
ca7d4163d7
|
Remove jitter and overlaps in interface infill
|
2013-08-12 18:45:03 +02:00 |
|
Alessandro Ranellucci
|
7062d028d2
|
Bugfix: top layers were not detected correctly, causing overlap of support material and object in some situations where there were contact regions having the same Z as some top regions
|
2013-08-12 18:12:53 +02:00 |
|
Alessandro Ranellucci
|
8d413eda44
|
Refactoring: generate interface and support in different cycles
|
2013-08-11 19:25:51 +02:00 |
|
Alessandro Ranellucci
|
5f07d39509
|
Reapply perimeter only to support
|
2013-08-10 21:30:50 +02:00 |
|
Alessandro Ranellucci
|
5380b6cb33
|
Incomplete work to improve support material by avoiding thin columns and making sure everything is supported correctly
|
2013-08-10 19:39:35 +02:00 |
|
Alessandro Ranellucci
|
abb5d1256f
|
Added some debugging code
|
2013-08-09 21:27:57 +02:00 |
|
Alessandro Ranellucci
|
4862d832b5
|
Simplify layer change code now that we have distinct support layers
|
2013-08-09 19:46:20 +02:00 |
|
Alessandro Ranellucci
|
548b301432
|
Offset projection of facets before the final union
|
2013-08-09 16:34:55 +02:00 |
|
Alessandro Ranellucci
|
b956faa153
|
Adapt avoid_crossing_perimeters code to the recent changes
|
2013-08-09 16:30:40 +02:00 |
|
Alessandro Ranellucci
|
3751e3813c
|
Fix regression causing too much collapsing of infill regions
|
2013-08-09 16:18:21 +02:00 |
|
Alessandro Ranellucci
|
5d80c26b29
|
Adjust collision detection for brim and include support islands inside the only_retract_when_crossing_perimeters logic
|
2013-08-09 15:04:14 +02:00 |
|
Alessandro Ranellucci
|
67f5b7ab14
|
Require --default-acceleration when other acceleration settings are used
|
2013-08-09 14:33:20 +02:00 |
|
Alessandro Ranellucci
|
99816e07a6
|
New --first-layer-acceleration option
|
2013-08-09 14:30:43 +02:00 |
|
Alessandro Ranellucci
|
cde662cb51
|
Fix collision detection for brim
|
2013-08-09 14:22:41 +02:00 |
|
Alessandro Ranellucci
|
3427b29a93
|
Fix wrong slices when many overlapping facets were present in the model
|
2013-08-08 16:27:41 +02:00 |
|
Alessandro Ranellucci
|
f6569cf359
|
Minor error causing support material to fail when first_layer_height was expressed in % (caught by regression test). #1371
|
2013-08-08 14:41:23 +02:00 |
|
Alessandro Ranellucci
|
4438aec12c
|
Revert "Remove thumbnail simplification because it caused loss of very thin parts. #1327"
This reverts commit 1210b89893.
Conflicts:
lib/Slic3r/GUI/Plater.pm
|
2013-08-05 20:48:09 +02:00 |
|
Alessandro Ranellucci
|
0ce7ebc4b8
|
Integerize plater thumbnails
|
2013-08-05 20:21:08 +02:00 |
|
Alessandro Ranellucci
|
d8e2cde962
|
Avoid problems caused in support material by layer heights being specified in configuration without the leading 0 (like .25). #1366
|
2013-07-31 23:44:17 +02:00 |
|
Alessandro Ranellucci
|
528595c7f7
|
Automatically ignore per-role extruders if they're not configured in Printer Settings (only in GUI expert mode) - CLI mode continues to autogenerate extruder settings. #1236
|
2013-07-31 20:43:19 +02:00 |
|
Alessandro Ranellucci
|
d83b14655a
|
Better tooltip for raft layers
|
2013-07-31 20:02:24 +02:00 |
|
Alessandro Ranellucci
|
6ddeb2fa07
|
Initialize support material interface extruder explicitely. #1364
|
2013-07-31 19:52:25 +02:00 |
|
Alessandro Ranellucci
|
415a2d165a
|
Cleaner code for first layer temperatures
|
2013-07-31 18:55:23 +02:00 |
|
Alessandro Ranellucci
|
60e5e2166a
|
Include support contact layers in skirt/brim generation
|
2013-07-31 16:29:44 +02:00 |
|
Alessandro Ranellucci
|
3b47e1a492
|
New --info option to show file info (size, volume, repair stats). Removed utils/file_info.pl
|
2013-07-31 15:10:11 +02:00 |
|
Alessandro Ranellucci
|
1b4878f305
|
Fix hang in new support material caused by numerical approximation leaving small polygons, as usual
|
2013-07-30 15:44:08 +02:00 |
|
Alessandro Ranellucci
|
4e13d61aed
|
Fix retraction/Z/lift problems after recent changes
|
2013-07-30 12:15:40 +02:00 |
|
Alessandro Ranellucci
|
913f401280
|
Merge new-support2
|
2013-07-29 20:50:26 +02:00 |
|
Alessandro Ranellucci
|
a2cc230bb5
|
Add note about a bug caused by the disabled optimization about splitting meshes before avoid_crossing_perimeters. #1315
|
2013-07-29 19:50:47 +02:00 |
|
Alessandro Ranellucci
|
10a8f479f9
|
Bugfix: lift was not working correctly with multiple extruders and multiple skirt layers. Also, we now ignore all lift settings except the one of the first extruder. Includes regression tests. #1332 #1338
|
2013-07-29 19:43:57 +02:00 |
|
Alessandro Ranellucci
|
b5907dc734
|
Bugfix: z_offset was not applied in spiral_vase. Includes regression test #1343
|
2013-07-29 17:28:30 +02:00 |
|
Alessandro Ranellucci
|
1210b89893
|
Remove thumbnail simplification because it caused loss of very thin parts. #1327
|
2013-07-29 16:43:48 +02:00 |
|
Alessandro Ranellucci
|
dc766f9f73
|
Bugfix: the tangent edge removal algorithm was refactored the wrong way and wasn't used anymore
|
2013-07-29 14:56:37 +02:00 |
|
Alessandro Ranellucci
|
8fe38d9b71
|
Bugfix: fatal error when failed loops were included in slices. #1358
|
2013-07-29 14:17:36 +02:00 |
|
Alessandro Ranellucci
|
9adac636b8
|
Avoid G92 E0 with sailfish. #1034
|
2013-07-29 14:17:30 +02:00 |
|
Alessandro Ranellucci
|
80676f358a
|
Keep edge lines in rectilinear infill even when the sides are not perfectly straight
|
2013-07-29 13:36:22 +02:00 |
|
Alessandro Ranellucci
|
2a2d15e422
|
Fix error after recent change about bridges
|
2013-07-29 12:15:30 +02:00 |
|
Alessandro Ranellucci
|
1f36406a62
|
Bugfix: thin bridge anchors were ignored. #304
|
2013-07-29 11:54:32 +02:00 |
|
Alessandro Ranellucci
|
948b43fe0d
|
Don't try to align rectilinear infill if solid, otherwise there will be a gap at one side
|
2013-07-29 11:05:04 +02:00 |
|
Alessandro Ranellucci
|
51de3ce14f
|
Switch print_z to unscaled coordinates
|
2013-07-29 00:27:53 +02:00 |
|
Alessandro Ranellucci
|
3bcb2f04ed
|
Add spiral vase test for hollow models
|
2013-07-28 15:02:03 +02:00 |
|
Alessandro Ranellucci
|
91cade7e8f
|
Make sure there are no gaps in spiral vase. Includes regression test. #1251
|
2013-07-28 13:39:15 +02:00 |
|
Alessandro Ranellucci
|
691c45d57f
|
Smarter handling of hollow prints. Optimization included
|
2013-07-28 10:56:41 +02:00 |
|
Alessandro Ranellucci
|
25af3eb35f
|
Proper fix for preventing shells to propagate too much
|
2013-07-27 19:41:36 +02:00 |
|
Alessandro Ranellucci
|
6bd4803612
|
Failing test case about spurious infill in hollow objects, caused by shells being correctly generated even for hollow objects - however sometimes we don't want that
|
2013-07-26 20:17:33 +02:00 |
|
Alessandro Ranellucci
|
0a8872ca6c
|
Extend utils/dump-stl.pl to also write STL files
|
2013-07-26 19:25:15 +02:00 |
|
Alessandro Ranellucci
|
debe540018
|
Better name for wipe
|
2013-07-26 16:23:43 +02:00 |
|