Alessandro Ranellucci
|
aa194c8125
|
Fix little regression causing object height not to be updated when object in plater was scaled
|
2013-07-26 14:30:00 +02:00 |
|
Alessandro Ranellucci
|
c1c1416838
|
Scale layer height ranges too when scaling object in plater. #1284
|
2013-07-26 14:26:59 +02:00 |
|
Alessandro Ranellucci
|
a145f1b6aa
|
Don't merge adjacent bridges so that more correct angles can be detected for each one
|
2013-07-26 12:31:44 +02:00 |
|
Alessandro Ranellucci
|
c69edf27e9
|
Bugfix: only_retract_when_crossing_perimeters was not triggering retraction when moving between islands that are covered/bridged on the above layer. #1308
|
2013-07-26 10:52:22 +02:00 |
|
Alessandro Ranellucci
|
37bf0fa53b
|
Bugfix: medial axis thin wall detection was triggered when not needed
|
2013-07-26 00:13:24 +02:00 |
|
Alessandro Ranellucci
|
8fe228fcee
|
Smarter ordering of gap fill
|
2013-07-26 00:03:28 +02:00 |
|
Alessandro Ranellucci
|
b1147861dd
|
Implement lower_bound() and upper_bound() methods for ZTable
|
2013-07-20 21:19:59 +02:00 |
|
Alessandro Ranellucci
|
e29aca3553
|
Reapply correct optimization for simplifiying fill_surfaces before performing the offset. #1325
|
2013-07-20 12:22:41 +02:00 |
|
Mark Hindess
|
b5426ad297
|
Revert "Optimization: simplify fill_surfaces before the offset operation"
To workaround issue #1325 and possibly #1320.
This reverts commit 3a046e3411.
|
2013-07-16 10:44:52 +01:00 |
|
Alessandro Ranellucci
|
027f8d1e53
|
Optimizations in the algorithm that builds loops
|
2013-07-13 20:56:13 +02:00 |
|
Alessandro Ranellucci
|
69a8bac9c9
|
Show a warning if we repaired the input file
|
2013-07-13 20:34:57 +02:00 |
|
Alessandro Ranellucci
|
6affa23297
|
Show repair stats in object info dialog
|
2013-07-13 20:23:03 +02:00 |
|
Alessandro Ranellucci
|
6f6ee40dae
|
Small optimization in case no overhang logic is required at all
|
2013-07-07 19:12:44 +02:00 |
|
Alessandro Ranellucci
|
c57a88c943
|
start_perimeters_at_non_overhang was still partially enforced
|
2013-07-07 19:11:23 +02:00 |
|
Alessandro Ranellucci
|
3a046e3411
|
Optimization: simplify fill_surfaces before the offset operation
|
2013-07-07 12:57:26 +02:00 |
|
Alessandro Ranellucci
|
cca25c9950
|
Fix a numerical issue causing failure to detect some bridge anchors
|
2013-07-06 14:38:53 +02:00 |
|
Alessandro Ranellucci
|
532ff3cde9
|
Apply the Polyline constructor refactoring to the newslice code
|
2013-07-06 12:18:58 +02:00 |
|
Alessandro Ranellucci
|
985af5ee56
|
Merge branch 'newslice'
|
2013-07-06 12:16:54 +02:00 |
|
Alessandro Ranellucci
|
0bb4a5649a
|
Merge branch 'master' into xs
|
2013-07-06 12:15:17 +02:00 |
|
Alessandro Ranellucci
|
8d1069766b
|
Workaround dclone() not being thread-safe
|
2013-07-06 12:14:49 +02:00 |
|
Alessandro Ranellucci
|
9dbf21235c
|
Fixed missing change in recent refactoring, causing plater crash. #1298
|
2013-07-06 11:50:41 +02:00 |
|
Alessandro Ranellucci
|
ab584babf6
|
Encode Windows paths for the C STL reader
|
2013-07-06 11:39:28 +02:00 |
|
Alessandro Ranellucci
|
28f8083ab7
|
Merge branch 'master' into xs
|
2013-07-06 11:38:40 +02:00 |
|
Alessandro Ranellucci
|
f455ecb7da
|
Rename adjust_overhang_flow to overhangs
|
2013-07-06 11:35:40 +02:00 |
|
Alessandro Ranellucci
|
606d856af8
|
Lower case option group titles
|
2013-07-06 02:46:09 +02:00 |
|
Alessandro Ranellucci
|
b857d79604
|
Move spiral_vase to vertical shells section
|
2013-07-05 22:23:45 +02:00 |
|
Alessandro Ranellucci
|
f8ae8d3e8d
|
New option to disable overhang flow
|
2013-07-05 22:12:58 +02:00 |
|
Alessandro Ranellucci
|
282c751b0f
|
New option for disabling thin wall detection
|
2013-07-05 22:10:43 +02:00 |
|
Alessandro Ranellucci
|
0a7e0ffecf
|
New options: start_perimeters_at_concave_points start_perimeters_at_non_overhang
|
2013-07-05 22:06:58 +02:00 |
|
Alessandro Ranellucci
|
362232ada4
|
New Quality section in GUI
|
2013-07-05 21:57:56 +02:00 |
|
Alessandro Ranellucci
|
f0440bede4
|
Move infill_every_layers infill_only_where_needed into their own "Reducing Printing Time" section
|
2013-07-05 21:55:01 +02:00 |
|
Alessandro Ranellucci
|
eb2d20d062
|
Merge branch 'master' into xs
|
2013-07-05 17:29:28 +02:00 |
|
Alessandro Ranellucci
|
339c487077
|
Fix starting point after overhang clipping is performed
|
2013-07-05 17:25:56 +02:00 |
|
Alessandro Ranellucci
|
b3b2a1e891
|
One more fix in overhang starting point detection
|
2013-07-05 17:08:26 +02:00 |
|
Alessandro Ranellucci
|
df4612a209
|
Prefer starting points that are NOT in overhangs
|
2013-07-05 17:00:14 +02:00 |
|
Alessandro Ranellucci
|
d074b98aba
|
Optimization: don't store wipe path if wipe is not requested
|
2013-07-05 15:03:08 +02:00 |
|
Alessandro Ranellucci
|
be4eb3762f
|
Use dclone() in Point class too
|
2013-07-05 14:48:03 +02:00 |
|
Alessandro Ranellucci
|
72f77a3420
|
Use dclone() in Polyline and ExPolygon too
|
2013-07-05 14:46:32 +02:00 |
|
Alessandro Ranellucci
|
8061cc6e30
|
Optimization in Polyline instantiation
|
2013-07-05 14:44:41 +02:00 |
|
Alessandro Ranellucci
|
27c421c27f
|
Slight optimization
|
2013-07-05 14:21:20 +02:00 |
|
Alessandro Ranellucci
|
b266d6217a
|
Skip slow gap detection if we aren't going to fill gaps anyway
|
2013-07-05 14:17:54 +02:00 |
|
Alessandro Ranellucci
|
4d46ebc6cb
|
Removed useless, slow, code
|
2013-07-05 14:17:09 +02:00 |
|
Alessandro Ranellucci
|
f26f084064
|
New freeze.t test
|
2013-07-03 15:42:01 +02:00 |
|
Alessandro Ranellucci
|
bb656ea72c
|
Merge branch 'master' into xs
|
2013-07-03 10:52:13 +02:00 |
|
Alessandro Ranellucci
|
71057b54a9
|
Allow negative values in validation...
|
2013-07-03 10:51:44 +02:00 |
|
Alessandro Ranellucci
|
63ba894260
|
Add some comments to OpenGL code
|
2013-07-01 12:23:44 +02:00 |
|
Alessandro Ranellucci
|
8ec3ec6bda
|
Cosmetic changes to the new OpenGL code by iXce
|
2013-07-01 10:58:30 +02:00 |
|
Alessandro Ranellucci
|
dcc2b7f4ff
|
Enable PreviewCanvas
|
2013-07-01 01:51:11 +02:00 |
|
Alessandro Ranellucci
|
7c4b1bc736
|
Merge pull request #1283 from iXce/master
Panning/rotation/zooming support for 3D viewer
|
2013-06-30 16:50:16 -07:00 |
|
Guillaume Seguin
|
b2e0c1ab42
|
Use max of all dimensions instead of max of first 2
|
2013-07-01 00:08:02 +02:00 |
|
Guillaume Seguin
|
1f229f3233
|
Cleanup
|
2013-06-30 23:54:13 +02:00 |
|
Guillaume Seguin
|
e92fefb6ff
|
Working rotation for mesh viewer
|
2013-06-30 23:51:06 +02:00 |
|
Alessandro Ranellucci
|
1b6a9c0c3b
|
Added validation on all settings. #611
|
2013-06-30 15:39:03 +02:00 |
|
Guillaume Seguin
|
6668a81c64
|
Start work on rotation handling
|
2013-06-29 18:31:06 +02:00 |
|
Guillaume Seguin
|
dd7830b1b7
|
Add panning support
|
2013-06-29 15:12:57 +02:00 |
|
Guillaume Seguin
|
43d764feff
|
Implement zoom to point
|
2013-06-29 14:16:56 +02:00 |
|
Guillaume Seguin
|
317c911c67
|
Remove leftover from 47b2c13c
|
2013-06-29 14:16:38 +02:00 |
|
Guillaume Seguin
|
bb3ebb0244
|
Switch to orthographic projection
|
2013-06-29 10:43:35 +02:00 |
|
Guillaume Seguin
|
47b2c13c99
|
Get rid of demo timer in PreviewCanvas
|
2013-06-29 10:43:21 +02:00 |
|
Alessandro Ranellucci
|
1f50d9c7e8
|
https -> http in manual URL
|
2013-06-24 20:38:20 +02:00 |
|
Alessandro Ranellucci
|
5975145426
|
Automatically repair any input STL file
|
2013-06-24 20:34:57 +02:00 |
|
Alessandro Ranellucci
|
ecdc2f077b
|
Merge branch 'master' into xs
Conflicts:
Build.PL
|
2013-06-24 19:37:07 +02:00 |
|
Alessandro Ranellucci
|
f29faf0548
|
New Slic3r::TriangleMesh::XS class
|
2013-06-24 19:35:49 +02:00 |
|
Alessandro Ranellucci
|
f5cc446853
|
Menu item for launching the manual
|
2013-06-24 18:07:33 +02:00 |
|
Alessandro Ranellucci
|
a15884dac9
|
Remove useless algorithm in loop merging code
|
2013-06-24 00:08:39 +02:00 |
|
Alessandro Ranellucci
|
3622193c3f
|
Rewrite the algorithm that closes loops in order. We now tolerate the case when more than two facets share a common edge
|
2013-06-24 00:02:01 +02:00 |
|
Alessandro Ranellucci
|
86c4f5c5b0
|
Merge branch 'master' into newslice
|
2013-06-23 22:23:25 +02:00 |
|
Alessandro Ranellucci
|
de45b823e1
|
Merge branch 'master' into xs
|
2013-06-23 21:12:19 +02:00 |
|
Alessandro Ranellucci
|
2a2633da0a
|
New automatic built-in STL repair
|
2013-06-23 21:11:46 +02:00 |
|
Alessandro Ranellucci
|
625a300822
|
New [layer_num] placeholder in layer change G-code
|
2013-06-23 19:25:32 +02:00 |
|
Alessandro Ranellucci
|
8ea4ed3b5e
|
Allow to supply custom G-code via command line if file is not found
|
2013-06-23 19:25:02 +02:00 |
|
Alessandro Ranellucci
|
2d687cd0a0
|
Only combine internal infill and leave internal-solid as it is. #1248
|
2013-06-23 18:21:47 +02:00 |
|
Alessandro Ranellucci
|
f3a9d41c70
|
Cache a Z table for layer range search
|
2013-06-23 17:07:12 +02:00 |
|
Alessandro Ranellucci
|
37105e8237
|
Ported get_layer_range() to C
|
2013-06-23 15:33:07 +02:00 |
|
Alessandro Ranellucci
|
9a904dc88d
|
Lighter implementation of the slicing algorithm to save memory and time
|
2013-06-23 12:26:40 +02:00 |
|
Alessandro Ranellucci
|
cd1a39397b
|
Optimize concentric loops
|
2013-06-23 00:50:44 +02:00 |
|
Alessandro Ranellucci
|
78f1527ab7
|
Compensate perimeter/infill overlap for concentric infill
|
2013-06-23 00:37:04 +02:00 |
|
Alessandro Ranellucci
|
5c7b447f07
|
Ensure there's no numerical error when searching for concave points
|
2013-06-23 00:21:19 +02:00 |
|
Alessandro Ranellucci
|
1e3ce9b8c4
|
Complete retraction if the wipe path was too short for the full retract. #1264
|
2013-06-23 00:10:57 +02:00 |
|
Alessandro Ranellucci
|
c03f9f0197
|
Fixed regression causing wrong direction for inwards move in holes. Includes regression test. #1265
|
2013-06-23 00:05:08 +02:00 |
|
Alessandro Ranellucci
|
0bd3d958e2
|
More optimizations in slice_facet()
|
2013-06-22 20:48:56 +02:00 |
|
Alessandro Ranellucci
|
1565560b55
|
One more little optimization
|
2013-06-22 20:37:15 +02:00 |
|
Alessandro Ranellucci
|
db266cde9f
|
Little optimizations in slicing
|
2013-06-22 20:32:39 +02:00 |
|
Alessandro Ranellucci
|
398e66572d
|
Optimization: remove overkill sort
|
2013-06-22 19:59:27 +02:00 |
|
Alessandro Ranellucci
|
82fbdb603f
|
Optimization: cache model bounding box
|
2013-06-22 19:36:50 +02:00 |
|
Alessandro Ranellucci
|
4774b0e910
|
Be tolerant with STL files without the "normal" word
|
2013-06-22 16:15:07 +02:00 |
|
Alessandro Ranellucci
|
64a21276e3
|
Add regression test for concave starting points. #135
|
2013-06-22 15:22:58 +02:00 |
|
Alessandro Ranellucci
|
aba7641fe4
|
Avoid starting loops on convex vertices and/or overhangs. #296 #135
|
2013-06-21 19:43:15 +02:00 |
|
Alessandro Ranellucci
|
90d8da0e0d
|
Limit fan speed to 100% :-)
|
2013-06-21 16:08:16 +02:00 |
|
Alessandro Ranellucci
|
19b40baf55
|
Add regression test to ensure fan is enabled when printing overhangs. #432
|
2013-06-21 15:38:58 +02:00 |
|
Alessandro Ranellucci
|
c707073a73
|
Some fixes about overhang detection. Includes regression tests
|
2013-06-21 14:52:35 +02:00 |
|
Alessandro Ranellucci
|
f5322596d9
|
Note to self in code
|
2013-06-20 20:16:15 +02:00 |
|
Alessandro Ranellucci
|
7e875393f5
|
New algorithm for overhang detection
|
2013-06-20 20:11:46 +02:00 |
|
Alessandro Ranellucci
|
015580629b
|
Removed wrong optimization causing possible extra retractions while moving in infill space
|
2013-06-20 19:43:53 +02:00 |
|
Alessandro Ranellucci
|
4474595629
|
Removed useless code
|
2013-06-20 19:21:35 +02:00 |
|
Alessandro Ranellucci
|
b414c50b68
|
Optimization: use Boost.Geometry for point in polygon
|
2013-06-20 18:48:11 +02:00 |
|
Alessandro Ranellucci
|
f7be746599
|
Disable overhang detection for now
|
2013-06-19 20:09:58 +02:00 |
|
Alessandro Ranellucci
|
fcd4de00e5
|
One more fix for --complete-objects working on single-object plates
|
2013-06-19 18:01:24 +02:00 |
|
Alessandro Ranellucci
|
5843f5df6c
|
Fix regression in --complete-objects causing fatal error and/or wrong warnings about object heights
|
2013-06-19 17:34:37 +02:00 |
|
Alessandro Ranellucci
|
b71bc37111
|
Remove a couple cases of dangerous aliasing, causing crashes. #1257
|
2013-06-17 19:27:08 +02:00 |
|