bubnikv 22ca927f12 Reworked the bridge detector to allow searching a single bridging ... direction over multiple regions. This allows a single bridge to be drawn over holes, which are too close to each other to allow for separate bridges. Fixes Bridging-Angle not optimal https://github.com/prusa3d/Slic3r/issues/12 Re-allowed adaptive infill line width for solid infills. The adaptive infill line width works in some circumstances, see Issue #15, but the original implementation often changed the line width too aggressively. The current implementation limits the line width change to 20%. Fixes Gaps between infill and perimeter leads to errors in laydown on following layer https://github.com/prusa3d/Slic3r/issues/15		2016-11-08 09:59:25 +01:00
..
angles.t	Bugfix: medial axis missed some segments. #2144	2014-08-03 15:03:47 +02:00
arcs.t	Avoid integer overflow in arc test. Fixes #1918	2014-04-22 23:01:01 -04:00
avoid_crossing_perimeters.t	Fixed regression causing crash when using avoid_crossing_perimeters with multiple object, caused by recent refactorings. Added regression test	2014-11-26 22:46:51 +01:00
bridges.t	Reworked the bridge detector to allow searching a single bridging	2016-11-08 09:59:25 +01:00
clean_polylines.t
clipper.t	Fix more regressions in test suite regarding the workaround for Clipper bug	2014-05-21 15:45:16 +02:00
collinear.t
combineinfill.t	Refactoring: removed the non-idempotent init_extruders() step. Also, infill_extruder was not limited to the available number of extruders when slicing from the plater, and support material extruder was considered also when support material was disabled	2015-03-06 09:56:58 +01:00
config.t	Removed setenv() test as we can't test environment variables in Perl since they are now set in XS	2015-07-01 20:15:52 +02:00
cooling.t	Defined the +-* operators on Pointf.	2016-10-21 16:53:42 +02:00
custom_gcode.t	Finished porting PlaceholderParser to XS	2015-07-01 19:35:22 +02:00
dynamic.t
fill.t	Test of a 100% coverage by the FillRectilinear2 has been disabled before,	2016-11-02 17:15:05 +01:00
flow.t	Make tests happy	2015-01-14 00:14:56 +01:00
gaps.t	Bugfix: gap fill was not inserted in the correct order before leaving island. Includes regression test. #1907	2014-04-29 15:25:14 +02:00
gcode.t	Ported Slic3r::GCode storage to XS	2015-07-01 21:47:17 +02:00
geometry.t	Bugfix: concave starting points were not correctly detected for slice holes. Includes regression test. #2857	2015-06-01 17:55:51 +02:00
layers.t	Failing test for broken command line scaling. #1889	2014-04-05 11:21:26 +02:00
loops.t
multi.t	Fixed test and implementation of ooze prevention standby points (wrong test caused wrong implementation). #2103	2015-01-19 15:31:12 +01:00
perimeters.t	Fix of a test case of PerimeterGenerator.	2016-09-28 11:17:59 +02:00
polyclip.t
pressure.t	Make tests happy with new defaults	2015-01-31 12:10:50 +01:00
print.t	Removed print_center option (but left --print-center from CLI)	2014-06-16 23:58:45 +02:00
retraction.t	Test case for Bugfix: use Lift-z option for 2. extruder #3385	2016-09-26 12:50:05 +02:00
shells.t	Ported more Slic3r::GCode methods to XS	2015-07-01 23:00:52 +02:00
skirt_brim.t	Bugfix: don't crash when skirts > 0 but skirt_height = 0. Includes regression test. #2537	2015-01-18 13:01:00 +01:00
slice.t
support.t	Use thick raft layers as we do for support material layers. #2723	2015-03-09 20:00:55 +01:00
svg.t	Bugfix: failure when exporting SVG from object containing multiple islands. Includes regression test. #2050	2014-05-26 11:13:53 +02:00
thin.t	More refactoring to medial axis and gap fill, more robust	2016-05-20 17:03:57 +02:00
threads.t	More work for removing references to $Slic3r::Config	2013-12-24 11:58:36 +01:00