| .. |
|
ExtrusionPath
|
Faster implementation of concentric infill, with loop order reversed so that smaller loops will be printed at the end. #898
|
2013-05-13 21:22:57 +02:00 |
|
Fill
|
Faster implementation of concentric infill, with loop order reversed so that smaller loops will be printed at the end. #898
|
2013-05-13 21:22:57 +02:00 |
|
Format
|
One more speed optimization in STL.pm
|
2013-05-14 14:17:46 +02:00 |
|
GCode
|
New --spiral-vase option to continously raise Z when printing single-walled vases. #997
|
2013-05-13 20:15:45 +02:00 |
|
Geometry
|
Perimeters refactoring complete
|
2013-05-11 21:30:26 +02:00 |
|
GUI
|
New --spiral-vase option to continously raise Z when printing single-walled vases. #997
|
2013-05-13 20:15:45 +02:00 |
|
Layer
|
Code cleanup and remove arc compensation code
|
2013-05-13 13:18:58 +02:00 |
|
Print
|
Don't extend solid layers when fill density is 0
|
2013-04-29 15:55:50 +02:00 |
|
Test
|
Little fix in SectionCut.pm
|
2013-04-28 11:31:03 +02:00 |
|
Config.pm
|
New --spiral-vase option to continously raise Z when printing single-walled vases. #997
|
2013-05-13 20:15:45 +02:00 |
|
ExPolygon.pm
|
New module to output SVG vertical sections of extrusion paths with real width and height. The commit includes a bugfix to the Polyline->grow() method and some simplification in the Line class which is now child of Polyline
|
2013-04-27 15:02:13 +02:00 |
|
Extruder.pm
|
New wipe feature
|
2013-03-17 02:22:50 +01:00 |
|
ExtrusionLoop.pm
|
Missing bit
|
2013-03-11 12:47:27 +01:00 |
|
ExtrusionPath.pm
|
Bugfix: is_printable() wasn't discarding narrow ring-shaped top/bottom surfaces because it was only considering the contour. This caused extra shell material even in hollow prints. #1049
|
2013-03-30 11:22:12 +01:00 |
|
Fill.pm
|
Faster implementation of concentric infill, with loop order reversed so that smaller loops will be printed at the end. #898
|
2013-05-13 21:22:57 +02:00 |
|
Flow.pm
|
Use full flow for sparse infill by default
|
2013-03-17 00:21:17 +01:00 |
|
GCode.pm
|
Only make the inwards move when we have more than one perimeter
|
2013-05-13 19:35:42 +02:00 |
|
Geometry.pm
|
Align rectilinear and line infill across layers (new implementation). #712
|
2013-04-18 17:34:21 +02:00 |
|
GUI.pm
|
Fix menus for --no-plater. #1112
|
2013-05-13 18:30:12 +02:00 |
|
Layer.pm
|
Factored out the layer height logic
|
2013-03-10 11:37:16 +01:00 |
|
Line.pm
|
New module to output SVG vertical sections of extrusion paths with real width and height. The commit includes a bugfix to the Polyline->grow() method and some simplification in the Line class which is now child of Polyline
|
2013-04-27 15:02:13 +02:00 |
|
Model.pm
|
Slice a single object with multiple layer heights. :-)
|
2013-03-10 14:58:49 +01:00 |
|
Point.pm
|
Merge branch 'master' into avoid-crossing-perimeters
|
2013-01-12 19:00:18 +01:00 |
|
Polygon.pm
|
New module to output SVG vertical sections of extrusion paths with real width and height. The commit includes a bugfix to the Polyline->grow() method and some simplification in the Line class which is now child of Polyline
|
2013-04-27 15:02:13 +02:00 |
|
Polyline.pm
|
New module to output SVG vertical sections of extrusion paths with real width and height. The commit includes a bugfix to the Polyline->grow() method and some simplification in the Line class which is now child of Polyline
|
2013-04-27 15:02:13 +02:00 |
|
Print.pm
|
Set support material enforce layers to 0 when spiral printing
|
2013-05-14 13:54:24 +02:00 |
|
Surface.pm
|
Bugfix: infill direction wasn't correctly alternated when infilling every 2 layers. #1068
|
2013-03-29 19:24:08 +01:00 |
|
SVG.pm
|
New script to generate vertical section cuts from any given G-code file
|
2013-05-02 11:42:51 +02:00 |
|
Test.pm
|
Move Slic3r::Test::GCodeReader to Slic3r::GCode::Reader
|
2013-05-13 20:14:33 +02:00 |
|
TriangleMesh.pm
|
Memory and speed optimization: only study meshes when needed
|
2013-05-14 14:47:00 +02:00 |
