| .. |
|
Fill
|
Enforce cleaner honeycomb paths
|
2015-02-01 12:27:20 +01:00 |
|
Format
|
Handle empty STL files gracefully instead of crashing. #2557
|
2015-01-18 12:12:10 +01:00 |
|
GCode
|
Bugfix: pressure regulation accumulated too much retraction and didn't discharge at the end of print. Includes regression test. #2470
|
2015-01-06 00:35:39 +01:00 |
|
Geometry
|
New semantics for ExtrusionLoop objects. Early processing of perimeter overhangs for paralellizing such work and making G-code export lighter. Lots of refactoring. This should fix a number of minor bugs, including reversals of perimeter overhangs.
|
2014-05-08 11:07:37 +02:00 |
|
GUI
|
Refactoring: removed the non-idempotent init_extruders() step. Also, infill_extruder was not limited to the available number of extruders when slicing from the plater, and support material extruder was considered also when support material was disabled
|
2015-03-06 09:56:58 +01:00 |
|
Layer
|
Change the behaviour of infill/perimeter overlap to handle some edge cases. #2632
|
2015-02-23 23:44:34 +01:00 |
|
Print
|
Remove ;_WIPE marks in G-code which were left between objects in sequential printing
|
2015-03-06 10:25:31 +01:00 |
|
Test
|
Restore functionality of Test::SectionCut
|
2014-12-27 13:04:28 +01:00 |
|
Config.pm
|
enabling firmware retraction for Machinekit in GUI
|
2015-02-07 12:35:35 +01:00 |
|
ExPolygon.pm
|
|
|
|
ExtrusionLoop.pm
|
Bugfix: seam_position = random didn't work with a single perimeter. #2179
|
2014-11-07 23:53:18 +01:00 |
|
ExtrusionPath.pm
|
Distinct extrusion role for support material interface
|
2014-05-12 22:59:49 +02:00 |
|
Fill.pm
|
Only apply perimeter/infill overlap to the endpoints of rectilinear infill (and do that in a more proper way)
|
2015-01-13 20:55:20 +01:00 |
|
Flow.pm
|
Distinct extrusion width for external perimeters
|
2014-06-09 21:22:15 +02:00 |
|
GCode.pm
|
Bugfix: double wipe was not prevented, causing potential collision between objects in sequential printing. #2691
|
2015-03-06 10:36:04 +01:00 |
|
Geometry.pm
|
Ported Slic3r::BridgeDetector to XS
|
2014-11-15 22:41:22 +01:00 |
|
GUI.pm
|
Typo in 4083b33807
|
2015-02-09 11:02:11 +01:00 |
|
Layer.pm
|
Refactoring: removed _islands members in Slic3r::GCode
|
2014-11-23 20:03:16 +01:00 |
|
Line.pm
|
Ported some minor methods to XS
|
2014-11-15 23:06:15 +01:00 |
|
Model.pm
|
Handle empty STL files gracefully instead of crashing. #2557
|
2015-01-18 12:12:10 +01:00 |
|
Point.pm
|
More efficient 3D preview of slices
|
2015-01-15 18:49:07 +01:00 |
|
Polygon.pm
|
Move dump_perl() to Slic3r::Polyline
|
2014-12-24 00:11:13 +01:00 |
|
Polyline.pm
|
Move dump_perl() to Slic3r::Polyline
|
2014-12-24 00:11:13 +01:00 |
|
Print.pm
|
Refactoring: removed the non-idempotent init_extruders() step. Also, infill_extruder was not limited to the available number of extruders when slicing from the plater, and support material extruder was considered also when support material was disabled
|
2015-03-06 09:56:58 +01:00 |
|
Surface.pm
|
New option for forcing the generation of interface shells. #1847
|
2014-03-25 01:11:28 +01:00 |
|
SVG.pm
|
Better pruning of thin walls to avoid unwanted extra extrusions. Includes regression test. #1794
|
2014-03-02 00:31:17 +01:00 |
|
Test.pm
|
Fixed test and implementation of ooze prevention standby points (wrong test caused wrong implementation). #2103
|
2015-01-19 15:31:12 +01:00 |
