bubnikv 79f5a16536 Reverted the perimeter generator to not save the perimeter areas. ... These could be calculated from the fill areas if needed. On the other side, the non-classified (non-split) fill areas are stored now for use in the "ensure vertical wall thickness" feature, also the non-split fill areas are re-used when recalculating the infills. This is safer than trying to stitch the fill region together from the classified fragments. Modified the "ensure vertical wall thickness" feature to use the non-split fill areas instead of perimeter areas for the calculation of non-supported regions. This is cheaper as the fill areas contain roughly half the edges.		2016-11-17 23:22:59 +01:00
..
angles.t	Bugfix: medial axis missed some segments. #2144	2014-08-03 15:03:47 +02:00
arcs.t	Avoid integer overflow in arc test. Fixes #1918	2014-04-22 23:01:01 -04:00
avoid_crossing_perimeters.t	Fixed regression causing crash when using avoid_crossing_perimeters with multiple object, caused by recent refactorings. Added regression test	2014-11-26 22:46:51 +01:00
bridges.t	Reworked the bridge detector to allow searching a single bridging	2016-11-08 09:59:25 +01:00
clean_polylines.t	Removed more unused functions and fixed tests	2013-11-22 16:19:15 +01:00
clipper.t	Fix more regressions in test suite regarding the workaround for Clipper bug	2014-05-21 15:45:16 +02:00
collinear.t	Removed dependency on Math::Clipper	2013-08-27 01:26:44 +02:00
combineinfill.t	Refactoring: removed the non-idempotent init_extruders() step. Also, infill_extruder was not limited to the available number of extruders when slicing from the plater, and support material extruder was considered also when support material was disabled	2015-03-06 09:56:58 +01:00
config.t	Removed setenv() test as we can't test environment variables in Perl since they are now set in XS	2015-07-01 20:15:52 +02:00
cooling.t	Defined the +-* operators on Pointf.	2016-10-21 16:53:42 +02:00
custom_gcode.t	Finished porting PlaceholderParser to XS	2015-07-01 19:35:22 +02:00
dynamic.t	Port offset_ex() and offset2_ex() to XS	2013-07-16 20:09:53 +02:00
fill.t	Test of a 100% coverage by the FillRectilinear2 has been disabled before,	2016-11-02 17:15:05 +01:00
flow.t	Make tests happy	2015-01-14 00:14:56 +01:00
gaps.t	Bugfix: gap fill was not inserted in the correct order before leaving island. Includes regression test. #1907	2014-04-29 15:25:14 +02:00
gcode.t	Ported Slic3r::GCode storage to XS	2015-07-01 21:47:17 +02:00
geometry.t	Bugfix: concave starting points were not correctly detected for slice holes. Includes regression test. #2857	2015-06-01 17:55:51 +02:00
layers.t	Failing test for broken command line scaling. #1889	2014-04-05 11:21:26 +02:00
loops.t	Fix threads, tests and require the most recent Moo version	2013-09-12 11:09:03 +02:00
multi.t	Fixed test and implementation of ooze prevention standby points (wrong test caused wrong implementation). #2103	2015-01-19 15:31:12 +01:00
perimeters.t	Reverted the perimeter generator to not save the perimeter areas.	2016-11-17 23:22:59 +01:00
polyclip.t	Removed more unused functions and fixed tests	2013-11-22 16:19:15 +01:00
pressure.t	Make tests happy with new defaults	2015-01-31 12:10:50 +01:00
print.t	Removed print_center option (but left --print-center from CLI)	2014-06-16 23:58:45 +02:00
retraction.t	Test case for Bugfix: use Lift-z option for 2. extruder #3385	2016-09-26 12:50:05 +02:00
shells.t	Ported more Slic3r::GCode methods to XS	2015-07-01 23:00:52 +02:00
skirt_brim.t	Bugfix: don't crash when skirts > 0 but skirt_height = 0. Includes regression test. #2537	2015-01-18 13:01:00 +01:00
slice.t	Fix threads, tests and require the most recent Moo version	2013-09-12 11:09:03 +02:00
support.t	Use thick raft layers as we do for support material layers. #2723	2015-03-09 20:00:55 +01:00
svg.t	Bugfix: failure when exporting SVG from object containing multiple islands. Includes regression test. #2050	2014-05-26 11:13:53 +02:00
thin.t	More refactoring to medial axis and gap fill, more robust	2016-05-20 17:03:57 +02:00
threads.t	More work for removing references to $Slic3r::Config	2013-12-24 11:58:36 +01:00