2022-04-01 22:38:24 +00:00
# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-03-31 at 16:49:58 UTC
2021-08-28 13:09:05 +00:00
bed_custom_model =
bed_custom_texture =
2022-03-20 16:51:20 +00:00
bed_shape = 0x0,200x0,200x200,0x200
2021-08-28 13:09:05 +00:00
before_layer_gcode =
between_objects_gcode =
color_change_gcode = M600
cooling_tube_length = 5
cooling_tube_retraction = 91.5
default_filament_profile =
default_print_profile =
deretract_speed = 0
2022-01-08 02:02:38 +00:00
end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\n\nM104 S0 ; turn off hotend temperature\nM140 S40 ; set heatbed to 40C\n\nG28 X0 ; home X axis\nG1 Y200 ; move pirint bed to the front\n\nM84 ; disable motors\n
2021-08-28 13:09:05 +00:00
extra_loading_move = -2
extruder_colour = ""
extruder_offset = 0x0
2021-12-31 12:30:40 +00:00
gcode_flavor = marlin2
2021-08-28 13:09:05 +00:00
high_current_on_filament_swap = 0
host_type = octoprint
inherits =
layer_gcode =
machine_limits_usage = emit_to_gcode
2022-04-01 22:38:24 +00:00
machine_max_acceleration_e = 5000,5000
2022-03-28 12:22:20 +00:00
machine_max_acceleration_extruding = 1250,1250
machine_max_acceleration_retracting = 1250,1250
2021-12-31 12:30:40 +00:00
machine_max_acceleration_travel = 1500,1250
2022-03-28 12:22:20 +00:00
machine_max_acceleration_x = 1000,1000
machine_max_acceleration_y = 1000,1000
2021-08-28 13:09:05 +00:00
machine_max_acceleration_z = 500,200
2022-03-30 23:35:41 +00:00
machine_max_feedrate_e = 100,100
2022-03-28 12:22:20 +00:00
machine_max_feedrate_x = 200,200
machine_max_feedrate_y = 200,200
2021-08-28 13:09:05 +00:00
machine_max_feedrate_z = 12,12
machine_max_jerk_e = 2.5,2.5
2022-04-01 22:38:24 +00:00
machine_max_jerk_x = 8,8
machine_max_jerk_y = 8,8
2021-08-28 13:09:05 +00:00
machine_max_jerk_z = 0.2,0.4
machine_min_extruding_rate = 0,0
machine_min_travel_rate = 0,0
max_layer_height = 0
2022-01-05 17:17:30 +00:00
max_print_height = 170
2021-08-28 13:09:05 +00:00
min_layer_height = 0.07
nozzle_diameter = 0.4
parking_pos_retraction = 92
pause_print_gcode = M601
print_host =
printer_model =
printer_notes =
printer_settings_id =
printer_technology = FFF
printer_variant =
printer_vendor =
printhost_apikey =
printhost_cafile =
2022-01-16 23:53:29 +00:00
remaining_times = 1
2021-08-28 13:09:05 +00:00
retract_before_travel = 2
retract_before_wipe = 0%
retract_layer_change = 0
2022-04-01 22:38:24 +00:00
retract_length = 0.8
2021-08-28 13:09:05 +00:00
retract_length_toolchange = 10
2022-04-01 22:38:24 +00:00
retract_lift = 0.4
2021-08-28 13:09:05 +00:00
retract_lift_above = 0
retract_lift_below = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
2022-04-01 22:38:24 +00:00
retract_speed = 35
2021-08-28 13:09:05 +00:00
silent_mode = 1
single_extruder_multi_material = 0
2022-03-30 21:32:35 +00:00
start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\n\nG28 ; home all axes\nG29 ; Bed level\nG1 X0 Y0 F5000; Move to 0,0\nG1 Z5 F5000 ; lift nozzle\n
2021-08-28 13:09:05 +00:00
template_custom_gcode =
thumbnails =
toolchange_gcode =
use_firmware_retraction = 0
use_relative_e_distances = 0
use_volumetric_e = 0
variable_layer_height = 1
2022-04-01 22:38:24 +00:00
wipe = 1
2021-08-28 13:09:05 +00:00
z_offset = 0
