MarlinFirmware/Marlin/src/module/planner.h

/**
 * Marlin 3D Printer Firmware
 * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */
#pragma once

/**
 * planner.h
 *
 * Buffer movement commands and manage the acceleration profile plan
 *
 * Derived from Grbl
 * Copyright (c) 2009-2011 Simen Svale Skogsrud
 */

#include "../MarlinCore.h"

#if HAS_JUNCTION_DEVIATION
  // Enable this option for perfect accuracy but maximum
  // computation. Should be fine on ARM processors.
  //#define JD_USE_MATH_ACOS

  // Disable this option to save 120 bytes of PROGMEM,
  // but incur increased computation and a reduction
  // in accuracy.
  #define JD_USE_LOOKUP_TABLE
#endif

#include "motion.h"
#include "../gcode/queue.h"

#if ENABLED(DELTA)
  #include "delta.h"
#endif

#if ABL_PLANAR
  #include "../libs/vector_3.h" // for matrix_3x3
#endif

#if ENABLED(FWRETRACT)
  #include "../feature/fwretract.h"
#endif

#if ENABLED(MIXING_EXTRUDER)
  #include "../feature/mixing.h"
#endif

#if HAS_CUTTER
  #include "../feature/spindle_laser_types.h"
#endif

// Feedrate for manual moves
#ifdef MANUAL_FEEDRATE
  constexpr xyze_feedrate_t _mf = MANUAL_FEEDRATE,
                            manual_feedrate_mm_s { _mf.x / 60.0f, _mf.y / 60.0f, _mf.z / 60.0f, _mf.e / 60.0f };
#endif

#if IS_KINEMATIC && HAS_JUNCTION_DEVIATION
  #define HAS_DIST_MM_ARG 1
#endif

enum BlockFlagBit : char {
  // Recalculate trapezoids on entry junction. For optimization.
  BLOCK_BIT_RECALCULATE,

  // Nominal speed always reached.
  // i.e., The segment is long enough, so the nominal speed is reachable if accelerating
  // from a safe speed (in consideration of jerking from zero speed).
  BLOCK_BIT_NOMINAL_LENGTH,

  // The block is segment 2+ of a longer move
  BLOCK_BIT_CONTINUED,

  // Sync the stepper counts from the block
  BLOCK_BIT_SYNC_POSITION
};

enum BlockFlag : char {
  BLOCK_FLAG_RECALCULATE          = _BV(BLOCK_BIT_RECALCULATE),
  BLOCK_FLAG_NOMINAL_LENGTH       = _BV(BLOCK_BIT_NOMINAL_LENGTH),
  BLOCK_FLAG_CONTINUED            = _BV(BLOCK_BIT_CONTINUED),
  BLOCK_FLAG_SYNC_POSITION        = _BV(BLOCK_BIT_SYNC_POSITION)
};

#if ENABLED(LASER_POWER_INLINE)

  typedef struct {
    uint8_t status,           // See planner settings for meaning
            power;            // Ditto; When in trapezoid mode this is nominal power
    #if ENABLED(LASER_POWER_INLINE_TRAPEZOID)
      uint8_t   power_entry;  // Entry power for the laser
      #if DISABLED(LASER_POWER_INLINE_TRAPEZOID_CONT)
        uint8_t   power_exit; // Exit power for the laser
        uint32_t  entry_per,  // Steps per power increment (to avoid floats in stepper calcs)
                  exit_per;   // Steps per power decrement
      #endif
    #endif
  } block_laser_t;

#endif

/**
 * struct block_t
 *
 * A single entry in the planner buffer.
 * Tracks linear movement over multiple axes.
 *
 * The "nominal" values are as-specified by gcode, and
 * may never actually be reached due to acceleration limits.
 */
typedef struct block_t {

  volatile uint8_t flag;                    // Block flags (See BlockFlag enum above) - Modified by ISR and main thread!

  // Fields used by the motion planner to manage acceleration
  float nominal_speed_sqr,                  // The nominal speed for this block in (mm/sec)^2
        entry_speed_sqr,                    // Entry speed at previous-current junction in (mm/sec)^2
        max_entry_speed_sqr,                // Maximum allowable junction entry speed in (mm/sec)^2
        millimeters,                        // The total travel of this block in mm
        acceleration;                       // acceleration mm/sec^2

  union {
    abce_ulong_t steps;                     // Step count along each axis
    abce_long_t position;                   // New position to force when this sync block is executed
  };
  uint32_t step_event_count;                // The number of step events required to complete this block

  #if EXTRUDERS > 1
    uint8_t extruder;                       // The extruder to move (if E move)
  #else
    static constexpr uint8_t extruder = 0;
  #endif

  TERN_(MIXING_EXTRUDER, MIXER_BLOCK_FIELD); // Normalized color for the mixing steppers

  // Settings for the trapezoid generator
  uint32_t accelerate_until,                // The index of the step event on which to stop acceleration
           decelerate_after;                // The index of the step event on which to start decelerating

  #if ENABLED(S_CURVE_ACCELERATION)
    uint32_t cruise_rate,                   // The actual cruise rate to use, between end of the acceleration phase and start of deceleration phase
             acceleration_time,             // Acceleration time and deceleration time in STEP timer counts
             deceleration_time,
             acceleration_time_inverse,     // Inverse of acceleration and deceleration periods, expressed as integer. Scale depends on CPU being used
             deceleration_time_inverse;
  #else
    uint32_t acceleration_rate;             // The acceleration rate used for acceleration calculation
  #endif

  uint8_t direction_bits;                   // The direction bit set for this block (refers to *_DIRECTION_BIT in config.h)

  // Advance extrusion
  #if ENABLED(LIN_ADVANCE)
    bool use_advance_lead;
    uint16_t advance_speed,                 // STEP timer value for extruder speed offset ISR
             max_adv_steps,                 // max. advance steps to get cruising speed pressure (not always nominal_speed!)
             final_adv_steps;               // advance steps due to exit speed
    float e_D_ratio;
  #endif

  uint32_t nominal_rate,                    // The nominal step rate for this block in step_events/sec
           initial_rate,                    // The jerk-adjusted step rate at start of block
           final_rate,                      // The minimal rate at exit
           acceleration_steps_per_s2;       // acceleration steps/sec^2

  #if HAS_CUTTER
    cutter_power_t cutter_power;            // Power level for Spindle, Laser, etc.
  #endif

  #if HAS_FAN
    uint8_t fan_speed[FAN_COUNT];
  #endif

  #if ENABLED(BARICUDA)
    uint8_t valve_pressure, e_to_p_pressure;
  #endif

  #if HAS_SPI_LCD
    uint32_t segment_time_us;
  #endif

  #if ENABLED(POWER_LOSS_RECOVERY)
    uint32_t sdpos;
  #endif

  #if ENABLED(LASER_POWER_INLINE)
    block_laser_t laser;
  #endif

} block_t;

#if ANY(LIN_ADVANCE, SCARA_FEEDRATE_SCALING, GRADIENT_MIX, LCD_SHOW_E_TOTAL)
  #define HAS_POSITION_FLOAT 1
#endif

#define BLOCK_MOD(n) ((n)&(BLOCK_BUFFER_SIZE-1))

#if ENABLED(LASER_POWER_INLINE)
  typedef struct {
    /**
     * Laser status bitmask; most bits are unused;
     *  0: Planner buffer enable
     *  1: Laser enable
     *  2: Reserved for direction
     */
    uint8_t status;
    /**
     * Laser power: 0 or 255 in case of PWM-less laser,
     * or the OCR value;
     *
     * Using OCR instead of raw power,
     * as it avoids floating points during move loop
     */
    uint8_t power;
  } settings_laser_t;
#endif

typedef struct {
   uint32_t max_acceleration_mm_per_s2[XYZE_N], // (mm/s^2) M201 XYZE
            min_segment_time_us;                // (µs) M205 B
      float axis_steps_per_mm[XYZE_N];          // (steps) M92 XYZE - Steps per millimeter
 feedRate_t max_feedrate_mm_s[XYZE_N];          // (mm/s) M203 XYZE - Max speeds
      float acceleration,                       // (mm/s^2) M204 S - Normal acceleration. DEFAULT ACCELERATION for all printing moves.
            retract_acceleration,               // (mm/s^2) M204 R - Retract acceleration. Filament pull-back and push-forward while standing still in the other axes
            travel_acceleration;                // (mm/s^2) M204 T - Travel acceleration. DEFAULT ACCELERATION for all NON printing moves.
 feedRate_t min_feedrate_mm_s,                  // (mm/s) M205 S - Minimum linear feedrate
            min_travel_feedrate_mm_s;           // (mm/s) M205 T - Minimum travel feedrate
  #if ENABLED(LASER_POWER_INLINE)
    settings_laser_t laser;
  #endif
} planner_settings_t;

#if DISABLED(SKEW_CORRECTION)
  #define XY_SKEW_FACTOR 0
  #define XZ_SKEW_FACTOR 0
  #define YZ_SKEW_FACTOR 0
#endif

typedef struct {
  #if ENABLED(SKEW_CORRECTION_GCODE)
    float xy;
    #if ENABLED(SKEW_CORRECTION_FOR_Z)
      float xz, yz;
    #else
      const float xz = XZ_SKEW_FACTOR, yz = YZ_SKEW_FACTOR;
    #endif
  #else
    const float xy = XY_SKEW_FACTOR,
                xz = XZ_SKEW_FACTOR, yz = YZ_SKEW_FACTOR;
  #endif
} skew_factor_t;

class Planner {
  public:

    /**
     * The move buffer, calculated in stepper steps
     *
     * block_buffer is a ring buffer...
     *
     *             head,tail : indexes for write,read
     *            head==tail : the buffer is empty
     *            head!=tail : blocks are in the buffer
     *   head==(tail-1)%size : the buffer is full
     *
     *  Writer of head is Planner::buffer_segment().
     *  Reader of tail is Stepper::isr(). Always consider tail busy / read-only
     */
    static block_t block_buffer[BLOCK_BUFFER_SIZE];
    static volatile uint8_t block_buffer_head,      // Index of the next block to be pushed
                            block_buffer_nonbusy,   // Index of the first non busy block
                            block_buffer_planned,   // Index of the optimally planned block
                            block_buffer_tail;      // Index of the busy block, if any
    static uint16_t cleaning_buffer_counter;        // A counter to disable queuing of blocks
    static uint8_t delay_before_delivering;         // This counter delays delivery of blocks when queue becomes empty to allow the opportunity of merging blocks


    #if ENABLED(DISTINCT_E_FACTORS)
      static uint8_t last_extruder;                 // Respond to extruder change
    #endif

    #if EXTRUDERS
      static int16_t flow_percentage[EXTRUDERS];    // Extrusion factor for each extruder
      static float e_factor[EXTRUDERS];             // The flow percentage and volumetric multiplier combine to scale E movement
    #endif

    #if DISABLED(NO_VOLUMETRICS)
      static float filament_size[EXTRUDERS],          // diameter of filament (in millimeters), typically around 1.75 or 2.85, 0 disables the volumetric calculations for the extruder
                   volumetric_area_nominal,           // Nominal cross-sectional area
                   volumetric_multiplier[EXTRUDERS];  // Reciprocal of cross-sectional area of filament (in mm^2). Pre-calculated to reduce computation in the planner
                                                      // May be auto-adjusted by a filament width sensor
    #endif

    static planner_settings_t settings;

    static uint32_t max_acceleration_steps_per_s2[XYZE_N]; // (steps/s^2) Derived from mm_per_s2
    static float steps_to_mm[XYZE_N];           // Millimeters per step

    #if HAS_JUNCTION_DEVIATION
      static float junction_deviation_mm;       // (mm) M205 J
      #if HAS_LINEAR_E_JERK
        static float max_e_jerk[DISTINCT_E];    // Calculated from junction_deviation_mm
      #endif
    #endif

    #if HAS_CLASSIC_JERK
      // (mm/s^2) M205 XYZ(E) - The largest speed change requiring no acceleration.
      static TERN(HAS_LINEAR_E_JERK, xyz_pos_t, xyze_pos_t) max_jerk;
    #endif

    #if HAS_LEVELING
      static bool leveling_active;          // Flag that bed leveling is enabled
      #if ABL_PLANAR
        static matrix_3x3 bed_level_matrix; // Transform to compensate for bed level
      #endif
      #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
        static float z_fade_height, inverse_z_fade_height;
      #endif
    #else
      static constexpr bool leveling_active = false;
    #endif

    #if ENABLED(LIN_ADVANCE)
      static float extruder_advance_K[EXTRUDERS];
    #endif

    /**
     * The current position of the tool in absolute steps
     * Recalculated if any axis_steps_per_mm are changed by gcode
     */
    static xyze_long_t position;

    #if HAS_POSITION_FLOAT
      static xyze_pos_t position_float;
    #endif

    #if IS_KINEMATIC
      static xyze_pos_t position_cart;
    #endif

    static skew_factor_t skew_factor;

    #if ENABLED(SD_ABORT_ON_ENDSTOP_HIT)
      static bool abort_on_endstop_hit;
    #endif
    #ifdef XY_FREQUENCY_LIMIT
      static int8_t xy_freq_limit_hz;         // Minimum XY frequency setting
      static float xy_freq_min_speed_factor;  // Minimum speed factor setting
      static int32_t xy_freq_min_interval_us; // Minimum segment time based on xy_freq_limit_hz
      static inline void refresh_frequency_limit() {
        //xy_freq_min_interval_us = xy_freq_limit_hz ?: LROUND(1000000.0f / xy_freq_limit_hz);
        if (xy_freq_limit_hz)
          xy_freq_min_interval_us = LROUND(1000000.0f / xy_freq_limit_hz);
      }
      static inline void set_min_speed_factor_u8(const uint8_t v255) {
        xy_freq_min_speed_factor = float(ui8_to_percent(v255)) / 100;
      }
      static inline void set_frequency_limit(const uint8_t hz) {
        xy_freq_limit_hz = constrain(hz, 0, 100);
        refresh_frequency_limit();
      }
    #endif

  private:

    /**
     * Speed of previous path line segment
     */
    static xyze_float_t previous_speed;

    /**
     * Nominal speed of previous path line segment (mm/s)^2
     */
    static float previous_nominal_speed_sqr;

    /**
     * Limit where 64bit math is necessary for acceleration calculation
     */
    static uint32_t cutoff_long;

    #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
      static float last_fade_z;
    #endif

    #if ENABLED(DISABLE_INACTIVE_EXTRUDER)
       // Counters to manage disabling inactive extruders
      static uint8_t g_uc_extruder_last_move[EXTRUDERS];
    #endif

    #if HAS_SPI_LCD
      volatile static uint32_t block_buffer_runtime_us; // Theoretical block buffer runtime in µs
    #endif

  public:

    /**
     * Instance Methods
     */

    Planner();

    void init();

    /**
     * Static (class) Methods
     */

    static void reset_acceleration_rates();
    static void refresh_positioning();
    static void set_max_acceleration(const uint8_t axis, float targetValue);
    static void set_max_feedrate(const uint8_t axis, float targetValue);
    static void set_max_jerk(const AxisEnum axis, float targetValue);


    #if EXTRUDERS
      FORCE_INLINE static void refresh_e_factor(const uint8_t e) {
        e_factor[e] = flow_percentage[e] * 0.01f * TERN(NO_VOLUMETRICS, 1.0f, volumetric_multiplier[e]);
      }

      static inline void set_flow(const uint8_t e, const int16_t flow) {
        flow_percentage[e] = flow;
        refresh_e_factor(e);
      }

    #endif

    // Manage fans, paste pressure, etc.
    static void check_axes_activity();

    // Update multipliers based on new diameter measurements
    static void calculate_volumetric_multipliers();

    #if ENABLED(FILAMENT_WIDTH_SENSOR)
      void apply_filament_width_sensor(const int8_t encoded_ratio);

      static inline float volumetric_percent(const bool vol) {
        return 100.0f * (vol
            ? volumetric_area_nominal / volumetric_multiplier[FILAMENT_SENSOR_EXTRUDER_NUM]
            : volumetric_multiplier[FILAMENT_SENSOR_EXTRUDER_NUM]
        );
      }
    #endif

    #if DISABLED(NO_VOLUMETRICS)

      FORCE_INLINE static void set_filament_size(const uint8_t e, const float &v) {
        filament_size[e] = v;
        // make sure all extruders have some sane value for the filament size
        LOOP_L_N(i, COUNT(filament_size))
          if (!filament_size[i]) filament_size[i] = DEFAULT_NOMINAL_FILAMENT_DIA;
      }

    #endif

    #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)

      /**
       * Get the Z leveling fade factor based on the given Z height,
       * re-calculating only when needed.
       *
       *  Returns 1.0 if planner.z_fade_height is 0.0.
       *  Returns 0.0 if Z is past the specified 'Fade Height'.
       */
      static inline float fade_scaling_factor_for_z(const float &rz) {
        static float z_fade_factor = 1;
        if (!z_fade_height) return 1;
        if (rz >= z_fade_height) return 0;
        if (last_fade_z != rz) {
          last_fade_z = rz;
          z_fade_factor = 1 - rz * inverse_z_fade_height;
        }
        return z_fade_factor;
      }

      FORCE_INLINE static void force_fade_recalc() { last_fade_z = -999.999f; }

      FORCE_INLINE static void set_z_fade_height(const float &zfh) {
        z_fade_height = zfh > 0 ? zfh : 0;
        inverse_z_fade_height = RECIPROCAL(z_fade_height);
        force_fade_recalc();
      }

      FORCE_INLINE static bool leveling_active_at_z(const float &rz) {
        return !z_fade_height || rz < z_fade_height;
      }

    #else

      FORCE_INLINE static float fade_scaling_factor_for_z(const float&) { return 1; }

      FORCE_INLINE static bool leveling_active_at_z(const float&) { return true; }

    #endif

    #if ENABLED(SKEW_CORRECTION)

      FORCE_INLINE static void skew(float &cx, float &cy, const float &cz) {
        if (WITHIN(cx, X_MIN_POS + 1, X_MAX_POS) && WITHIN(cy, Y_MIN_POS + 1, Y_MAX_POS)) {
          const float sx = cx - cy * skew_factor.xy - cz * (skew_factor.xz - (skew_factor.xy * skew_factor.yz)),
                      sy = cy - cz * skew_factor.yz;
          if (WITHIN(sx, X_MIN_POS, X_MAX_POS) && WITHIN(sy, Y_MIN_POS, Y_MAX_POS)) {
            cx = sx; cy = sy;
          }
        }
      }
      FORCE_INLINE static void skew(xyz_pos_t &raw) { skew(raw.x, raw.y, raw.z); }

      FORCE_INLINE static void unskew(float &cx, float &cy, const float &cz) {
        if (WITHIN(cx, X_MIN_POS, X_MAX_POS) && WITHIN(cy, Y_MIN_POS, Y_MAX_POS)) {
          const float sx = cx + cy * skew_factor.xy + cz * skew_factor.xz,
                      sy = cy + cz * skew_factor.yz;
          if (WITHIN(sx, X_MIN_POS, X_MAX_POS) && WITHIN(sy, Y_MIN_POS, Y_MAX_POS)) {
            cx = sx; cy = sy;
          }
        }
      }
      FORCE_INLINE static void unskew(xyz_pos_t &raw) { unskew(raw.x, raw.y, raw.z); }

    #endif // SKEW_CORRECTION

    #if HAS_LEVELING
      /**
       * Apply leveling to transform a cartesian position
       * as it will be given to the planner and steppers.
       */
      static void apply_leveling(xyz_pos_t &raw);
      static void unapply_leveling(xyz_pos_t &raw);
      FORCE_INLINE static void force_unapply_leveling(xyz_pos_t &raw) {
        leveling_active = true;
        unapply_leveling(raw);
        leveling_active = false;
      }
    #else
      FORCE_INLINE static void apply_leveling(xyz_pos_t&) {}
      FORCE_INLINE static void unapply_leveling(xyz_pos_t&) {}
    #endif

    #if ENABLED(FWRETRACT)
      static void apply_retract(float &rz, float &e);
      FORCE_INLINE static void apply_retract(xyze_pos_t &raw) { apply_retract(raw.z, raw.e); }
      static void unapply_retract(float &rz, float &e);
      FORCE_INLINE static void unapply_retract(xyze_pos_t &raw) { unapply_retract(raw.z, raw.e); }
    #endif

    #if HAS_POSITION_MODIFIERS
      FORCE_INLINE static void apply_modifiers(xyze_pos_t &pos, bool leveling=ENABLED(PLANNER_LEVELING)) {
        TERN_(SKEW_CORRECTION, skew(pos));
        if (leveling) apply_leveling(pos);
        TERN_(FWRETRACT, apply_retract(pos));
      }

      FORCE_INLINE static void unapply_modifiers(xyze_pos_t &pos, bool leveling=ENABLED(PLANNER_LEVELING)) {
        TERN_(FWRETRACT, unapply_retract(pos));
        if (leveling) unapply_leveling(pos);
        TERN_(SKEW_CORRECTION, unskew(pos));
      }
    #endif // HAS_POSITION_MODIFIERS

    // Number of moves currently in the planner including the busy block, if any
    FORCE_INLINE static uint8_t movesplanned() { return BLOCK_MOD(block_buffer_head - block_buffer_tail); }

    // Number of nonbusy moves currently in the planner
    FORCE_INLINE static uint8_t nonbusy_movesplanned() { return BLOCK_MOD(block_buffer_head - block_buffer_nonbusy); }

    // Remove all blocks from the buffer
    FORCE_INLINE static void clear_block_buffer() { block_buffer_nonbusy = block_buffer_planned = block_buffer_head = block_buffer_tail = 0; }

    // Check if movement queue is full
    FORCE_INLINE static bool is_full() { return block_buffer_tail == next_block_index(block_buffer_head); }

    // Get count of movement slots free
    FORCE_INLINE static uint8_t moves_free() { return BLOCK_BUFFER_SIZE - 1 - movesplanned(); }

    /**
     * Planner::get_next_free_block
     *
     * - Get the next head indices (passed by reference)
     * - Wait for the number of spaces to open up in the planner
     * - Return the first head block
     */
    FORCE_INLINE static block_t* get_next_free_block(uint8_t &next_buffer_head, const uint8_t count=1) {

      // Wait until there are enough slots free
      while (moves_free() < count) { idle(); }

      // Return the first available block
      next_buffer_head = next_block_index(block_buffer_head);
      return &block_buffer[block_buffer_head];
    }

    /**
     * Planner::_buffer_steps
     *
     * Add a new linear movement to the buffer (in terms of steps).
     *
     *  target      - target position in steps units
     *  fr_mm_s     - (target) speed of the move
     *  extruder    - target extruder
     *  millimeters - the length of the movement, if known
     *
     * Returns true if movement was buffered, false otherwise
     */
    static bool _buffer_steps(const xyze_long_t &target
      #if HAS_POSITION_FLOAT
        , const xyze_pos_t &target_float
      #endif
      #if HAS_DIST_MM_ARG
        , const xyze_float_t &cart_dist_mm
      #endif
      , feedRate_t fr_mm_s, const uint8_t extruder, const float &millimeters=0.0
    );

    /**
     * Planner::_populate_block
     *
     * Fills a new linear movement in the block (in terms of steps).
     *
     *  target      - target position in steps units
     *  fr_mm_s     - (target) speed of the move
     *  extruder    - target extruder
     *  millimeters - the length of the movement, if known
     *
     * Returns true is movement is acceptable, false otherwise
     */
    static bool _populate_block(block_t * const block, bool split_move,
        const xyze_long_t &target
      #if HAS_POSITION_FLOAT
        , const xyze_pos_t &target_float
      #endif
      #if HAS_DIST_MM_ARG
        , const xyze_float_t &cart_dist_mm
      #endif
      , feedRate_t fr_mm_s, const uint8_t extruder, const float &millimeters=0.0
    );

    /**
     * Planner::buffer_sync_block
     * Add a block to the buffer that just updates the position
     */
    static void buffer_sync_block();

  #if IS_KINEMATIC
    private:

      // Allow do_homing_move to access internal functions, such as buffer_segment.
      friend void do_homing_move(const AxisEnum, const float, const feedRate_t);
  #endif

    /**
     * Planner::buffer_segment
     *
     * Add a new linear movement to the buffer in axis units.
     *
     * Leveling and kinematics should be applied ahead of calling this.
     *
     *  a,b,c,e     - target positions in mm and/or degrees
     *  fr_mm_s     - (target) speed of the move
     *  extruder    - target extruder
     *  millimeters - the length of the movement, if known
     */
    static bool buffer_segment(const float &a, const float &b, const float &c, const float &e
      #if HAS_DIST_MM_ARG
        , const xyze_float_t &cart_dist_mm
      #endif
      , const feedRate_t &fr_mm_s, const uint8_t extruder, const float &millimeters=0.0
    );

    FORCE_INLINE static bool buffer_segment(abce_pos_t &abce
      #if HAS_DIST_MM_ARG
        , const xyze_float_t &cart_dist_mm
      #endif
      , const feedRate_t &fr_mm_s, const uint8_t extruder, const float &millimeters=0.0
    ) {
      return buffer_segment(abce.a, abce.b, abce.c, abce.e
        #if HAS_DIST_MM_ARG
          , cart_dist_mm
        #endif
        , fr_mm_s, extruder, millimeters);
    }

  public:

    /**
     * Add a new linear movement to the buffer.
     * The target is cartesian. It's translated to
     * delta/scara if needed.
     *
     *  rx,ry,rz,e   - target position in mm or degrees
     *  fr_mm_s      - (target) speed of the move (mm/s)
     *  extruder     - target extruder
     *  millimeters  - the length of the movement, if known
     *  inv_duration - the reciprocal if the duration of the movement, if known (kinematic only if feeedrate scaling is enabled)
     */
    static bool buffer_line(const float &rx, const float &ry, const float &rz, const float &e, const feedRate_t &fr_mm_s, const uint8_t extruder, const float millimeters=0.0
      #if ENABLED(SCARA_FEEDRATE_SCALING)
        , const float &inv_duration=0.0
      #endif
    );

    FORCE_INLINE static bool buffer_line(const xyze_pos_t &cart, const feedRate_t &fr_mm_s, const uint8_t extruder, const float millimeters=0.0
      #if ENABLED(SCARA_FEEDRATE_SCALING)
        , const float &inv_duration=0.0
      #endif
    ) {
      return buffer_line(cart.x, cart.y, cart.z, cart.e, fr_mm_s, extruder, millimeters
        #if ENABLED(SCARA_FEEDRATE_SCALING)
          , inv_duration
        #endif
      );
    }

    /**
     * Set the planner.position and individual stepper positions.
     * Used by G92, G28, G29, and other procedures.
     *
     * The supplied position is in the cartesian coordinate space and is
     * translated in to machine space as needed. Modifiers such as leveling
     * and skew are also applied.
     *
     * Multiplies by axis_steps_per_mm[] and does necessary conversion
     * for COREXY / COREXZ / COREYZ to set the corresponding stepper positions.
     *
     * Clears previous speed values.
     */
    static void set_position_mm(const float &rx, const float &ry, const float &rz, const float &e);
    FORCE_INLINE static void set_position_mm(const xyze_pos_t &cart) { set_position_mm(cart.x, cart.y, cart.z, cart.e); }
    static void set_e_position_mm(const float &e);

    /**
     * Set the planner.position and individual stepper positions.
     *
     * The supplied position is in machine space, and no additional
     * conversions are applied.
     */
    static void set_machine_position_mm(const float &a, const float &b, const float &c, const float &e);
    FORCE_INLINE static void set_machine_position_mm(const abce_pos_t &abce) { set_machine_position_mm(abce.a, abce.b, abce.c, abce.e); }

    /**
     * Get an axis position according to stepper position(s)
     * For CORE machines apply translation from ABC to XYZ.
     */
    static float get_axis_position_mm(const AxisEnum axis);

    static inline abce_pos_t get_axis_positions_mm() {
      const abce_pos_t out = {
        get_axis_position_mm(A_AXIS),
        get_axis_position_mm(B_AXIS),
        get_axis_position_mm(C_AXIS),
        get_axis_position_mm(E_AXIS)
      };
      return out;
    }

    // SCARA AB axes are in degrees, not mm
    #if IS_SCARA
      FORCE_INLINE static float get_axis_position_degrees(const AxisEnum axis) { return get_axis_position_mm(axis); }
    #endif

    // Called to force a quick stop of the machine (for example, when
    // a Full Shutdown is required, or when endstops are hit)
    static void quick_stop();

    // Called when an endstop is triggered. Causes the machine to stop inmediately
    static void endstop_triggered(const AxisEnum axis);

    // Triggered position of an axis in mm (not core-savvy)
    static float triggered_position_mm(const AxisEnum axis);

    // Block until all buffered steps are executed / cleaned
    static void synchronize();

    // Wait for moves to finish and disable all steppers
    static void finish_and_disable();

    // Periodic tick to handle cleaning timeouts
    // Called from the Temperature ISR at ~1kHz
    static void tick() {
      if (cleaning_buffer_counter) --cleaning_buffer_counter;
    }

    /**
     * Does the buffer have any blocks queued?
     */
    FORCE_INLINE static bool has_blocks_queued() { return (block_buffer_head != block_buffer_tail); }

    /**
     * Get the current block for processing
     * and mark the block as busy.
     * Return nullptr if the buffer is empty
     * or if there is a first-block delay.
     *
     * WARNING: Called from Stepper ISR context!
     */
    static block_t* get_current_block();

    /**
     * "Discard" the block and "release" the memory.
     * Called when the current block is no longer needed.
     */
    FORCE_INLINE static void discard_current_block() {
      if (has_blocks_queued())
        block_buffer_tail = next_block_index(block_buffer_tail);
    }

    #if HAS_SPI_LCD
      static uint16_t block_buffer_runtime();
      static void clear_block_buffer_runtime();
    #endif

    #if ENABLED(AUTOTEMP)
      static float autotemp_min, autotemp_max, autotemp_factor;
      static bool autotemp_enabled;
      static void getHighESpeed();
      static void autotemp_M104_M109();
      static void autotemp_update();
    #endif

    #if HAS_LINEAR_E_JERK
      FORCE_INLINE static void recalculate_max_e_jerk() {
        const float prop = junction_deviation_mm * SQRT(0.5) / (1.0f - SQRT(0.5));
        LOOP_L_N(i, EXTRUDERS)
          max_e_jerk[E_INDEX_N(i)] = SQRT(prop * settings.max_acceleration_mm_per_s2[E_INDEX_N(i)]);
      }
    #endif

  private:

    /**
     * Get the index of the next / previous block in the ring buffer
     */
    static constexpr uint8_t next_block_index(const uint8_t block_index) { return BLOCK_MOD(block_index + 1); }
    static constexpr uint8_t prev_block_index(const uint8_t block_index) { return BLOCK_MOD(block_index - 1); }

    /**
     * Calculate the distance (not time) it takes to accelerate
     * from initial_rate to target_rate using the given acceleration:
     */
    static float estimate_acceleration_distance(const float &initial_rate, const float &target_rate, const float &accel) {
      if (accel == 0) return 0; // accel was 0, set acceleration distance to 0
      return (sq(target_rate) - sq(initial_rate)) / (accel * 2);
    }

    /**
     * Return the point at which you must start braking (at the rate of -'accel') if
     * you start at 'initial_rate', accelerate (until reaching the point), and want to end at
     * 'final_rate' after traveling 'distance'.
     *
     * This is used to compute the intersection point between acceleration and deceleration
     * in cases where the "trapezoid" has no plateau (i.e., never reaches maximum speed)
     */
    static float intersection_distance(const float &initial_rate, const float &final_rate, const float &accel, const float &distance) {
      if (accel == 0) return 0; // accel was 0, set intersection distance to 0
      return (accel * 2 * distance - sq(initial_rate) + sq(final_rate)) / (accel * 4);
    }

    /**
     * Calculate the maximum allowable speed squared at this point, in order
     * to reach 'target_velocity_sqr' using 'acceleration' within a given
     * 'distance'.
     */
    static float max_allowable_speed_sqr(const float &accel, const float &target_velocity_sqr, const float &distance) {
      return target_velocity_sqr - 2 * accel * distance;
    }

    #if ENABLED(S_CURVE_ACCELERATION)
      /**
       * Calculate the speed reached given initial speed, acceleration and distance
       */
      static float final_speed(const float &initial_velocity, const float &accel, const float &distance) {
        return SQRT(sq(initial_velocity) + 2 * accel * distance);
      }
    #endif

    static void calculate_trapezoid_for_block(block_t* const block, const float &entry_factor, const float &exit_factor);

    static void reverse_pass_kernel(block_t* const current, const block_t * const next);
    static void forward_pass_kernel(const block_t * const previous, block_t* const current, uint8_t block_index);

    static void reverse_pass();
    static void forward_pass();

    static void recalculate_trapezoids();

    static void recalculate();

    #if HAS_JUNCTION_DEVIATION

      FORCE_INLINE static void normalize_junction_vector(xyze_float_t &vector) {
        float magnitude_sq = 0;
        LOOP_XYZE(idx) if (vector[idx]) magnitude_sq += sq(vector[idx]);
        vector *= RSQRT(magnitude_sq);
      }

      FORCE_INLINE static float limit_value_by_axis_maximum(const float &max_value, xyze_float_t &unit_vec) {
        float limit_value = max_value;
        LOOP_XYZE(idx) {
          if (unit_vec[idx]) {
            if (limit_value * ABS(unit_vec[idx]) > settings.max_acceleration_mm_per_s2[idx])
              limit_value = ABS(settings.max_acceleration_mm_per_s2[idx] / unit_vec[idx]);
          }
        }
        return limit_value;
      }

    #endif // !CLASSIC_JERK
};

#define PLANNER_XY_FEEDRATE() (_MIN(planner.settings.max_feedrate_mm_s[X_AXIS], planner.settings.max_feedrate_mm_s[Y_AXIS]))

extern Planner planner;