daid303
2f60e324dc
Fixed #394
2013-02-14 14:04:26 +01:00
daid
5e2abfcdcd
Merge pull request #391 from STB3/Marlin_with_SD-Card_Change_Menu
...
Add SD-Card change and SD-Card init. for electronics equipped with LCD Display
2013-02-13 08:56:00 -08:00
Dirk Eichel
a0d4e8e78e
Add Messages for SD Card init. & change
2013-02-13 10:05:18 +01:00
mfeherpataky
bbf0cc1379
Update Marlin/ultralcd_implementation_hitachi_HD44780.h
...
Fix to a bug that I just introduced - sorry. Forgot about offset of string length.
2013-02-12 20:06:51 +01:00
Dirk Eichel
c8f1fbd9d8
Add SD-Card change and SD-Card init.
...
Add SD-Card change and SD-Card init. for reprap electronics without
SD-Chard change detect pin.
2013-02-12 17:35:46 +01:00
mfeherpataky
71ddb8dc60
Update Marlin/ultralcd_implementation_hitachi_HD44780.h
...
Use all available characters in narrow LCDs < 20 characters.
2013-02-12 00:03:40 +01:00
mfeherpataky
d2c547c407
Update Marlin/ultralcd_implementation_hitachi_HD44780.h
...
Fix to a minor bug with hardcoded LCD_WIDTH that draws edited values outside of the 16 characters width LCDs.
2013-02-11 23:25:24 +01:00
Denis B
70871715e4
Added support for extruder offset handling
...
The extruder offset can be specified in the configuration
file or adjusted on the fly using the "M218 T# X# Y#" command.
The EEPROM support is not yet merged in.
The "T#" command can take option "F#" that specifies the feedrate
at which the printing head should be re-positioned. If not
specified the re-positioning move is not preformed immediately,
but the coordinates are adjusted for the printer to properly
position the head when the next movement happens.
2013-02-04 23:05:45 -05:00
Denis B
49b2ddc8c1
Cleaned up non-standard characters
2013-02-04 01:41:40 -05:00
Bernhard Kubicek
f8876a7958
Merge pull request #376 from kintel/skip_longfilenames
...
Also skip .files and _files with long filenames. I think its better than before. If somebody dislikes it, or wants additional configuration, it can be done in a future step. Thanks, Marius, and nice to have you helping!
2013-02-03 03:05:31 -08:00
daid
18fcc367d2
Merge pull request #371 from Banjer/Melzi_LED_PIN
...
Chenged LED_PIN for Melzi boards, added comment about broken versions of...
2013-02-02 03:23:43 -08:00
Bas Spaans
19ce90fe02
Added comment about M42 usage (clean)
2013-01-31 18:20:23 +01:00
Bas Spaans
00fed0a703
Revert "Extended comment explaining M42 usage"
...
This reverts commit 01541ee64c
2013-01-31 18:11:13 +01:00
Marius Kintel
e06d820909
Also skip .files and _files with long filenames
2013-01-31 12:07:42 -05:00
Bas Spaans
01541ee64c
Extended comment explaining M42 usage
2013-01-31 18:00:25 +01:00
Marius Kintel
f24f02e212
compile fix: quickStop() needs stepper.h
2013-01-31 10:43:03 -05:00
Bas Spaans
12c41423ad
Fixed typo in comment
2013-01-30 22:54:04 +01:00
Bas Spaans
0995eaa492
Chenged LED_PIN for Melzi boards, added comment about broken versions of the Sanguino libraries
2013-01-30 22:25:01 +01:00
Bernhard
1d06b10962
Added a feature to have filament change by gcode or display trigger.
...
[default off for now]
syntax: M600 X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal]
if enabled, after a M600, the printer will retract by E, lift by Z, move to XY, retract even more filament.
Oh, and it will display "remove filament" and beep like crazy.
You are then supposed to insert a new filament (other color, e.g.) and click the display to continue.
After having the nozzle cleaned manually, aided by the disabled e-steppers.
After clicking, the printer will then go back the whole shebang, and continue printing with a fancy new color.
2013-01-27 13:21:34 +01:00
daid303
408b349a84
Fixed #368 . Commented out the wrong pin definition, but explained why it is there.
2013-01-21 15:46:17 +01:00
Daniele Sdei
9ecb267b63
Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1
2013-01-14 15:47:40 +01:00
Daniele Sdei
3cf59f6f9a
add RepRapPro Huxley thermistor tables
2013-01-14 15:36:08 +01:00
daid
c1730e2b08
Merge pull request #363 from yuroller/sanguino_panelolu
...
Panelolu pin assignment for sanguinololu
2013-01-10 07:19:37 -08:00
Yuri Valentini
86358dd6cd
Panelolu pin assignment for sanguinololu from http://reprap.org/wiki/Panelolu
2013-01-10 12:23:20 +01:00
daid303
0f3f5d083d
Minor cleanup of the new FAN_KICKSTART code. #334
2013-01-10 11:08:45 +01:00
daid
6ec56fa923
Merge pull request #334 from KevinOConnor/FanKick
...
Add feature to briefly run the cooling fan at full speed when it first starts.
2013-01-09 02:47:59 -08:00
daid
965baf2683
Merge pull request #362 from daid/Marlin_v1
...
Finnish language
2013-01-09 02:42:09 -08:00
Kevin O'Connor
3d91bd486c
Add "kick fan" feature - briefly run fan at full speed on start.
...
Add a feature to run the cooling fan at full speed for a small period
(default 100ms) when first starting the fan. Some fans wont reliably
start spinning at low power, and many fans have issue with the PWM at
low power. However, once the fan starts spinning it can reliably be
set to a wide range of PWM values.
2013-01-08 18:50:15 -05:00
Kevin O'Connor
3f2f94ef28
Be consistent in setting of the fan PWM.
...
Always set the FAN PWM value in check_axes_activity() and always use
the value of the active move if a move is active.
2013-01-08 18:49:18 -05:00
Henry Palonen
7f30039d2a
+ Finnish translation
2013-01-08 19:21:34 +02:00
daid303
14e1d495ef
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
2013-01-08 17:10:30 +01:00
daid303
bbe7d3d0fe
Fixed #312
2013-01-08 17:09:57 +01:00
daid
7ce509b9a7
Merge pull request #361 from yuroller/MakefileSanguino
...
Makefile sanguino
2013-01-08 06:22:27 -08:00
Yuri Valentini
9c34c4f05b
fixes for ramps compilation using installed arduino ide
2013-01-08 12:54:31 +01:00
daid303
442ade15a6
Move Gen6 stuff into a proper location.
2013-01-08 12:31:28 +01:00
daid
5fd4582cc8
Merge pull request #242 from Drakelive/Marlin_v1
...
Fixes issues # 216 and # 135 for Gen6 and Gen6 Deluxe board
2013-01-08 03:29:20 -08:00
daid303
8b88e3b386
Fixed #345 , Fixed #267 .
2013-01-08 12:14:55 +01:00
daid
27843388c6
Merge pull request #360 from njprossi/Marlin_v1
...
Power signal control definitions for other power supplies
2013-01-08 02:58:02 -08:00
daid303
921273baa0
Added optional feature to stop printing when an endstop is hit. Made the Z display on the LCD in 3.2 format instead of 3.1. Added LCD message when and endstop is hit.
2013-01-08 11:53:18 +01:00
Yuri Valentini
7d20ec706e
Added libraries from Arduino 1.0.3 for sanguino build
2013-01-07 17:26:50 +01:00
Nicolas Rossi
437eb3bafc
Initialize PS_ON at startup
2013-01-07 14:57:51 +01:00
Nicolas Rossi
f3c1fc70a9
Power signal control definitions for ATX and others
2013-01-07 14:33:30 +01:00
Yuri Valentini
dad7691df9
makefile for sanguino standalone compilation
2013-01-07 11:08:10 +01:00
Daniele Sdei
5f82f03ff3
Add italian MSG_RESUMING.
2012-12-28 11:44:35 +01:00
daid303
5e3873c8db
Add german MSG_RESUMING.
2012-12-25 20:53:11 +01:00
daid303
01aac2a142
Small changes on the LCD panel, let the speed control work better, line up the parameter edit the same as the menu, remove some unused defines, and remove the Z from the 10mm move menu.
2012-12-21 16:14:47 +01:00
daid303
b69cb9fbd9
Change the end of SD cart print message from minutes/seconds to hours/minutes.
2012-12-19 12:26:40 +01:00
daid
30254e3388
Merge pull request #350 from jcrocholl/Marlin_v1
...
Automatically set *_MIN_PIN and *_MAX_PIN according to *_HOME_DIR.
2012-12-17 02:16:31 -08:00
daid303
38ee395ac7
Replace the 1ms delay for 2 nops to get a 100ns delay. #259
2012-12-17 11:12:11 +01:00
daid303
5df5e4c4a2
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
2012-12-17 11:09:18 +01:00
daid303
a95dcd74e7
Fix some of the duplicated PSTRs, saving 500bytes of flash with LCD on.
2012-12-17 11:09:09 +01:00
Johann Rocholl
8caf5d252d
Remove bogus blank line.
2012-12-16 12:50:20 -08:00
Johann Rocholl
b39f5d614a
For boards with only one endstop per axis, automatically set *_MIN_PIN and *_MAX_PIN according to *_HOME_DIR.
2012-12-16 12:09:53 -08:00
oni303
ab09fa4bbf
fixed pwm generation at pin D12 and D13 when one of them is used as FAN_PIN on Sanguino, added soft pwm entry for FAN_PIN in temperature.cpp
2012-12-16 01:36:57 +01:00
Sergey Taranenko
5697451c72
fix lcd class
2012-12-14 15:39:47 +04:00
Sergey Taranenko
58e806f3fa
Fix the russial translation.
2012-12-14 15:39:26 +04:00
Sergey Taranenko
50a5ce1dc4
deduplicate messages
2012-12-14 15:37:05 +04:00
daid303
6123a00e64
Fix the german translation.
2012-12-14 11:11:02 +01:00
daid303
7c21716886
Fixed #341
2012-12-14 10:53:11 +01:00
daid303
ae1bc83350
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
2012-12-13 13:25:22 +01:00
daid303
596a7e1904
Fix compiling for Arduin < 1.0.0
2012-12-13 13:24:55 +01:00
Daid
b264317fa0
Reverted the patch by KevinOConnor, as it crashes some versions of avr-gcc and caused linking issues.
2012-12-13 12:19:12 +01:00
Daid
673577a31b
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
2012-12-13 11:41:34 +01:00
Daid
23022f1a82
Updates to Makefile to compile for Teensy.
2012-12-13 11:41:27 +01:00
daid
96e9db8919
Merge pull request #339 from KevinOConnor/CompilerFlags
...
Add additional optimization flags to Makefile
2012-12-13 01:30:17 -08:00
daid303
08356361ac
Fixing a problem with heated beds not working without PID and BED_LIMIT_SWITCHING
2012-12-13 10:25:29 +01:00
daid303
047d037f8c
#ifdef fix for #326
2012-12-13 09:04:41 +01:00
Kevin O'Connor
0908458381
Use gcc "-fwhole-program" optimization.
...
Use "whole program" and "link time optimization" features of gcc. The
whole-program optimization enables the compiler to evaluate the entire
firmware for optimization instead of just one code file at a time.
This leads to better overall optimizations.
2012-12-12 23:22:35 -05:00
Kevin O'Connor
16fbb455ef
Use linker "--relax" option.
...
The "relax" option enables the linker to convert certain "call"
instructions to the smaller "rcall" instruction. This reduces the
size of the resulting binary.
2012-12-12 23:22:31 -05:00
daid303
f30b46b2a8
One more fix for #338 , I really should get a heated bed to test with.
2012-12-12 23:06:17 +01:00
daid303
65c3f1ffcd
Most likely fixing #338
2012-12-12 21:56:17 +01:00
daid303
7577717b59
Fixed #336
2012-12-12 13:08:26 +01:00
daid303
1a8f54cea1
The big LCD code update. This splits the display and menu implementation. Paving the way for future different displays. It also makes it easier to modify the menu structures while keeping everything consistant. Note that this most likely breaks the translations, which need to be updated.
2012-12-12 11:47:03 +01:00
daid303
6731c094ee
Fix compiling with just an 16x2 LCD and no buttons.
2012-12-12 11:32:33 +01:00
daid303
b99a928a80
Fix the M117 (display message on LCD) when used over USB with checksums.
2012-12-12 09:35:32 +01:00
daid303
55ba90ac19
Add PID functional range setting. With high powered heaters the current functional range of 10 degrees causes high overshoots as the PID needs to kick in before the temperature hits 10 degrees below target.
2012-12-12 09:08:37 +01:00
daid303
5ff5cee8ce
Fix the sensitive pin definitions, there where analogue numbers in the digital pin list. Also made M42 without a P function on the LED_PIN (which was otherwise a useless pin definition)
2012-12-11 14:53:53 +01:00
daid303
8b58edc70e
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
2012-12-11 13:38:34 +01:00
daid
d0319d45af
Merge pull request #335 from jcrocholl/Marlin_v1
...
Fix endstop pins for Printrboard
2012-12-11 02:59:58 -08:00
Johann Rocholl
ca409e5531
Fix X/Y/Z_MIN_PIN for Printrboard.
2012-12-11 01:59:48 -08:00
Johann Rocholl
1f45cb0a51
Fix typo in MANUAL_HOME_POSITION (plural S missing) and improve comments.
2012-12-11 01:54:40 -08:00
daid303
46ec4b648c
Added some missing Mxxx comments to M commands. Fixed the unsetting of the timer dividers for the fast PWM fan.
2012-12-11 10:21:44 +01:00
Daid
724f5aa36b
Update on makefile for moved Arduino addons.
2012-12-10 12:06:30 +01:00
daid303
6d9dfa96c3
Move the Arduino related stuff out of the Marlin tree, as they are not directly related to Marlin functionality but addons for the Arduino IDE. Also split up the addons for pre 1.0.0 Arduino and post 1.0.0 Arduino.
2012-12-10 12:02:29 +01:00
daid303
3fb07d9b8d
Add MINTEMP/MAXTEMP error to LCD, and fix temperature bug with more then 1 extruder.
2012-12-10 10:48:46 +01:00
daid303
82c8724b33
Fix compile with PID_DEBUG
2012-12-09 23:50:12 +01:00
daid303
9b160972a1
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
2012-12-09 23:46:42 +01:00
daid303
e036750bdf
Use the disable macros on initialization. Which fixes a bug when there is no pin defined for stepper enabled (motherboard 4)
2012-12-09 23:46:25 +01:00
Daid
fcd9de72ef
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
2012-12-09 23:31:07 +01:00
Daid
32d4373e0f
Add printrboard and brainwave to Makefile.
2012-12-09 23:30:55 +01:00
daid
b3ddbcee2a
Merge pull request #329 from jcrocholl/Marlin_v1
...
Add Printrboard and Brainwave to pins.h and fastio.h
2012-12-09 14:29:26 -08:00
Daid
29435dfb4b
Proper avr for Sanguino in Makefile.
2012-12-09 23:02:03 +01:00
daid303
52158dffcc
Big temperature code update. No longer converts back and forwards between temperature and raw sample value. Reducing complexity, removing code. Also named some variables better. While keeping the safety intact and functionality the same.
2012-12-09 23:00:06 +01:00
Daid
ca7acbe6d9
Allow specification of which arduino hardware subvariant in Makefile.
2012-12-09 19:19:57 +01:00
Johann Rocholl
33247733e0
Teensylu and Printrboard use different analog pins for thermistors.
2012-12-09 02:19:13 -08:00
Johann Rocholl
621c24a10f
AT90USB is only defined after pins.h is included.
2012-12-09 01:40:33 -08:00
Johann Rocholl
6cba11f087
Stop redefining MOTHERBOARD and #define AT90USB instead. Also put #ifndef AT90USB around the HardwareSerial_h trick, so now Printrboard / Brainwave support compiles on Arduino 1.0.2 as well.
2012-12-09 01:32:09 -08:00
Johann Rocholl
4d351b4846
Improved formatting and comments for consistency.
2012-12-08 20:15:53 -08:00
Johann Rocholl
a30007caa4
If fastio.h is not messed up then Teensylu and Printrboard are actually using the same pins.
2012-12-08 19:46:42 -08:00
Johann Rocholl
6aa87a7b67
Use the same fastio.h definition for AT90USB1286/7 and AT90USB646/7.
2012-12-08 15:16:38 -08:00
