956 Commits

Author	SHA1	Message	Date
Scott Lahteine	7674befa47	DOGM SPI delay is less common	2020-03-09 17:46:49 -05:00
Scott Lahteine	64d092935b	More useful ENABLED / DISABLED macros (#17054)	2020-03-07 22:20:41 -06:00
Scott Lahteine	20f93404a7	Add / correct comments	2020-03-07 02:16:17 -06:00
Scott Lahteine	0578e9b16e	Move SENSORLESS_PROBING to the probes section ... Fixes a bug with HAS_BED_PROBE not being set before use.	2020-03-05 11:05:11 -06:00
thisiskeithb	efc739a880	Use BED_MAXTEMP for PTC_MAX_BED_TEMP (#17061)	2020-03-03 14:22:28 -06:00
Scott Lahteine	3a07b4412d	Asynchronous M114 and (R)ealtime position option (#17032)	2020-03-02 21:52:53 -06:00
InsanityAutomation	552f7a91d0	Default on/off for Power Loss Recovery (#17051)	2020-03-02 16:07:53 -06:00
Scott Lahteine	b1a50d54e2	HAS_TRINAMIC => HAS_TRINAMIC_CONFIG	2020-03-02 12:04:36 -06:00
Scott Lahteine	832951ec44	Case-insensitive g-code option (#16932)	2020-02-26 09:23:55 -06:00
Scott Lahteine	5b438fb20d	HAS_SDCARD_CONNECTION is more obsolete	2020-02-25 22:30:30 -06:00
InsanityAutomation	3e685777a8	Fix LCD cutter/bed icons overlapping (#16956)	2020-02-25 03:07:36 -06:00
InsanityAutomation	3a6f776c4b	Update POWER_LOSS_PIN comment (#16957)	2020-02-24 23:51:10 -06:00
Scott Lahteine	64a81f887a	EXPERIMENTAL integrated BABYSTEPPING (#16829)	2020-02-15 21:42:28 -06:00
George Fu	63dd0f249d	Fysetc S6 pins / LCD updates (#16830)	2020-02-14 07:18:57 -06:00
Scott Lahteine	3bef7a4450	Add g-code quoted strings, improve stream code (#16818)	2020-02-10 14:52:15 -06:00
Scott Lahteine	18a7276909	Revert "Coolstep for TMC2130, 2209, 5130, 5160" ... Reverting #16790 as not ready for primetime.	2020-02-09 21:22:26 -06:00
InsanityAutomation	cc1ff27256	Bump config version to 020004 (#16816)	2020-02-09 12:15:02 -06:00
Fabio Santos	894762259b	Coolstep for TMC2130, 2209, 5130, 5160 (#16790)	2020-02-08 21:01:57 -06:00
Scott Lahteine	793939a365	Upgrade an ifdef	2020-02-04 08:46:37 -06:00
Scott Lahteine	7bf2190f03	Fix CALIBRATION_GCODE pin handling	2020-02-04 08:32:43 -06:00
felixstorm	38a9706e16	Keep secure credentials in a separate config file (#16773)	2020-02-03 23:29:01 -06:00
Scott Lahteine	bfad23d3e2	(c) 2020	2020-02-03 08:00:57 -06:00
InsanityAutomation	e58d1bf974	G34 automatic point assignment (#16473)	2020-02-01 04:50:44 -06:00
Scott Lahteine	e8ed4329ea	Cleanup of old includes, add comments	2020-01-29 22:41:18 -06:00
Hans007a	e2eef1256a	G60/G61 Position Save/Restore (#16557)	2020-01-26 23:19:05 -06:00
Scott Lahteine	1d1dc8e339	More 8 extruder defines	2020-01-26 03:24:54 -06:00
Scott Lahteine	86c18ea6e0	Bring configs and drivers.h up to date	2020-01-24 23:17:52 -06:00
Ryan	b7f86bffd5	Arc segment radius scaling (#16551)	2020-01-21 02:53:26 -06:00
InsanityAutomation	79810b7fcb	G12 defaults per tool. Event G-code for post-toolchange (#16554)	2020-01-21 02:51:23 -06:00
Scott Lahteine	84c874c53b	Tweak some config spacing	2020-01-21 02:43:34 -06:00
0r31	b57ef4b261	Override for LPC1768 u8g/digipot I2C master ID (#16622)	2020-01-20 20:09:16 -06:00
InsanityAutomation	0fcf2b1110	Quad Z stepper support (#16277)	2020-01-19 23:35:07 -06:00
tompe-proj	a338dce83f	PINDA v2 temperature sensor / compensation (#16293)	2020-01-17 17:16:45 -06:00
Dennis	2d7f94cae1	Adjustable ADC debounce delay (#16264)	2020-01-15 18:06:03 -06:00
gjdodd	7481563bd9	Nikon IR support for time lapse photos (#16539)	2020-01-15 17:59:41 -06:00
Scott Lahteine	ea7363a8f4	Update more configs	2020-01-14 18:48:29 -06:00
Bob Kuhn	1ad53cee1f	Improved STMicro L64XX stepper driver support (#16452)	2020-01-13 18:47:30 -06:00
Luc	d854c8fa5f	ESP3d integration for ESP32 (#16515)	2020-01-10 17:22:41 -06:00
Jamie	36d08f8ad3	Add ARC_SEGMENTS_PER_SEC for finer G2/G3 arcs (#16510)	2020-01-09 04:48:00 -06:00
Jamie	9b970cf12f	Add option to invert joystick axes (#16466)	2020-01-05 02:01:05 -06:00
George Fu	e593da1c23	Update and fix DGUS (#16317)	2020-01-03 21:00:44 -06:00
rado79	0be8b22d3c	Add FILAMENT_UNLOAD_PURGE_FEEDRATE (#16372)	2020-01-01 21:56:58 -06:00
Scott Lahteine	00c83e9ca6	Update comments re: NOZZLE_AS_PROBE	2020-01-01 19:41:23 -06:00
Scott Lahteine	b49a0e39d5	HOME_USING_SPREADCYCLE is obsolete ... Co-Authored-By: teemuatlut <teemu.mantykallio@live.fi>	2019-12-19 16:02:57 -06:00
Scott Lahteine	53f77dfadf	Remove obsolete TMC2209 comment	2019-12-19 15:56:52 -06:00
Jason Smith	1bad8f1b17	Improve pulse timing and step reliability (#16128)	2019-12-19 02:38:48 -06:00
Moshi Binyamini	dcdaa2025f	Sanity-check Z_STEPPER_AUTO_ALIGN coordinates (#16231)	2019-12-19 00:59:01 -06:00
Scott Lahteine	303ddb862a	Tweak some config names	2019-12-12 22:18:04 -06:00
haschtl	ff6518c0a8	Add PID_FAN_SCALING option (#15585)	2019-11-26 03:34:43 -06:00
Scott Lahteine	441e822fb3	LULZBOT_TOUCH_UI => TOUCH_UI_FTDI_EVE	2019-11-23 17:04:17 -06:00
BigTreeTech	ab8b24fdba	Power Loss Recovery with a UPS (#15943)	2019-11-20 17:40:21 -06:00
Scott Lahteine	aa93e1f21a	Update TMC_ADV examples	2019-11-15 02:15:10 -06:00
Roman Moravčík	e110f5abce	M73 R : Set Remaining Time (#15549)	2019-11-12 19:36:54 -06:00
Scott Lahteine	5e5045c4ee	Touch UI finishing touches	2019-11-10 18:52:53 -06:00
danym21	28e1614c2e	Add Sensorless Homing current (#15690)	2019-11-10 18:45:06 -06:00
LinFor	48b7a1e66e	Allow non-zero "fan off" PWM value (#15709)	2019-11-10 16:33:56 -06:00
Scott Lahteine	288af0ddf6	Whitespace	2019-11-01 15:39:05 -05:00
studiodyne	f139642e0f	XY/Z Babystep Multiplicators (#15691)	2019-10-28 16:44:17 -05:00
Scott Lahteine	7a342ecb93	Show Total E during print (#15703)	2019-10-27 17:49:27 -05:00
Scott Lahteine	93f0012959	Cancel Objects - As seen at ERRF2019 (#15590)	2019-10-24 15:35:40 -05:00
Scott Lahteine	2a7e1d459f	Option to rotate Percent, (E)lapsed, and (R)emaining time (#15578)	2019-10-24 14:00:59 -05:00
Scott Lahteine	ccf61eca84	Fix diplay elaspsed	2019-10-24 13:48:27 -05:00
Luu Lac	0b0b822671	Add note: TMC2209 requires stealthChop for Sensorless Homing (#15658)	2019-10-24 11:58:37 -05:00
Robby Candra	16ae9ee88b	Update Configuration_adv	2019-10-17 05:37:22 +07:00
Robby Candra	9b88c3e79b	DOGM Progress Display, option to disable display rotation	2019-10-17 05:26:09 +07:00
Jason Smith	832cb7e1ac	Z_STEPPER_AUTO_ALIGN — To align with Z stepper points (#15195)	2019-10-16 13:39:58 -05:00
InsanityAutomation	b2eda1af2f	Fix typo in G34 configuration (#15572)	2019-10-15 17:22:13 -05:00
LinFor	b20d5a7cc6	Estimate Remaining Time (graphical display) (#15497)	2019-10-10 21:03:33 -05:00
Scott Lahteine	b4d48fdc91	Followup to #15481	2019-10-08 21:38:02 -05:00
Scott Lahteine	c0005e939c	Enable junction deviation by default (#15481)	2019-10-08 19:42:18 -05:00
Scott Lahteine	9dcccc11ba	Fix extra condition	2019-10-07 22:36:49 -05:00
Giuliano Zaro	a1ad01e4ab	Limit Case Light PWM (#15459)	2019-10-05 22:32:50 -05:00
Bob Kuhn	178dcd6fd8	SPI chaining with TMCStepper simplified interface (#15179)	2019-09-29 05:47:20 -05:00
Scott Lahteine	50e4545255	Add custom types for position (#15204)	2019-09-29 04:25:39 -05:00
Ludy	f28f191ebf	Trailing whitespace (#15403)	2019-09-28 15:32:37 -05:00
InsanityAutomation	a6b0223eea	Revive and improve DELTA probe bounds, LRFB options (#15372)	2019-09-28 01:19:11 -05:00
Scott Lahteine	9a209012b5	Improve M114_DETAIL comment	2019-09-25 20:29:29 -05:00
Marcio Teixeira	149e9b733e	Simplified ExtUI language selection (#15359)	2019-09-25 01:25:21 -05:00
Marcio Teixeira	4ff59d178d	LULZBOT_TOUCH_UI extended character set (#15301)	2019-09-24 18:49:40 -05:00
InsanityAutomation	6a312fae80	Add before/after dir change delays (#15314)	2019-09-19 23:05:17 -05:00
Scott Lahteine	843a19102c	Shorten an option description	2019-09-14 16:45:04 -05:00
Scott Lahteine	3d0ead7dcb	Bring Configuration_adv.h up to date	2019-09-14 04:30:17 -05:00
Scott Lahteine	1d574b0f6a	Tweak config spaces	2019-09-11 17:32:54 -05:00
Marcio Teixeira	47d19bab40	Lulzbot ExtUI Western language support (#15208) ... Fix #15134	2019-09-10 20:07:03 -05:00
Jamie	dbee0e9c54	Analog joystick jogging control (#14648)	2019-09-08 00:55:34 -05:00
Scott Lahteine	a3052da703	Move manual move to lcd section	2019-09-06 18:24:39 -05:00
Scott Lahteine	18dd5cb46a	Config comment patch	2019-09-05 01:48:12 -05:00
Scott Lahteine	2563e32aa3	Format FWRETRACT config comments	2019-09-04 12:48:50 -05:00
Bob Kuhn	ba91bca1eb	TMC SPI daisy chain support (experimental) (#15081)	2019-08-30 17:39:45 -05:00
thisiskeithb	f5a1fabd38	Clarify TMC2209 Sensitivity vs. Others (#15092)	2019-08-29 16:57:56 -05:00
Robby Candra	38983fdfa9	Add 'Back' Button for Touch TFT 320x240 (#15060)	2019-08-29 01:19:07 -05:00
AlexandrZloy	0ebaea94be	Add stallGuard threshold for X2 (#15042)	2019-08-29 00:15:31 -05:00
Marcio Teixeira	da601d5114	Update USB_FLASH_DRIVE_SUPPORT (#15021)	2019-08-24 01:47:19 -05:00
Scott Lahteine	5e777601f3	Add TURBO_BACK_MENU_ITEM option (#14991)	2019-08-20 19:37:03 -05:00
Tim Moore	67f8ba6fed	Allow pullup/downs on power loss pin (#14986)	2019-08-20 02:40:44 -05:00
Scott Lahteine	c8e476ad60	Embed some items in HAS_LCD_MENU	2019-08-18 18:41:51 -05:00
Ludy	6715fd159c	Animated Marlin boot screen (#14961)	2019-08-17 18:40:01 -05:00
Marcio Teixeira	8bdb3d9970	Add CONTROLLERFAN_SPEED_Z_ONLY (#14956)	2019-08-16 21:57:19 -05:00
Marcio Teixeira	274934ad81	Add LULZBOT_TOUCH_UI (#14967)	2019-08-16 18:34:13 -05:00
Marcio Teixeira	179d6c4ed1	Add STARTUP_SCRIPT option. M17 parity with M18. (#14953)	2019-08-14 21:05:15 -05:00
Joseph Bozarth	0fbb26c28f	M16 - Expected Printer Check (#14924)	2019-08-13 23:38:45 -05:00
teemuatlut	d4974ea719	TMC SPI Endstops and Improved Sensorless Homing (#14044)	2019-08-04 22:22:58 -05:00
rafaljot	e44fccf3d2	Add support for M575 (#14757)	2019-07-30 02:30:00 -05:00
MarcelMo	f8aa52346f	Configurable Z move distance (#14593)	2019-07-30 02:16:26 -05:00
Marcio Teixeira	eefe3f595a	New options: Bootscreen as Info, game Easter-egg (#13829)	2019-07-28 22:47:20 -05:00
Scott Lahteine	6b02b89ab4	Update serial sub-unit descriptions	2019-07-28 17:38:37 -05:00
Giuliano Zaro	290466578f	Adafruit Grand Central M4 (#14749)	2019-07-28 14:48:29 -05:00
Scott Lahteine	5c3ec6306f	Max7219 side-by-side arrangement (#14702)	2019-07-22 05:22:21 -05:00
Scott Lahteine	b3f42d2519	Update SD host config comment	2019-06-28 19:13:27 -05:00
Scott Lahteine	93cd66ac11	Tweaky change from (C) to (c)	2019-06-27 23:58:16 -05:00
Scott Lahteine	d7d80418ae	Singleton for cutting tools (#14429)	2019-06-27 23:06:49 -05:00
Scott Lahteine	00cc1079af	Add missing chamber auto fan options	2019-06-27 16:05:47 -05:00
Andy Shaw	064177154c	Update SD card connection / sharing options (#14325)	2019-06-26 03:55:57 -05:00
InsanityAutomation	aa0383a83b	Enhance IDEX toolchange auto-return w/ no park, full control (#14117)	2019-06-23 20:00:48 -05:00
InsanityAutomation	a9acd2f497	G34 configurable angle limit (#14321)	2019-06-20 21:18:36 -05:00
Scott Lahteine	a31cb910f5	Tweak some config spacing	2019-06-20 21:08:47 -05:00
Scott Lahteine	4df4c47994	Add TMC2209 support (#14249)	2019-06-20 15:47:50 -05:00
Scott Lahteine	dd06017f64	Bring configs up to date	2019-06-19 01:03:51 -05:00
Scott Lahteine	aacb904e1f	Adjust some config comments	2019-06-17 20:22:07 -05:00
mb300sd	bf8bfb5c66	Add Coolant Control M7/M8/M9 (#10745)	2019-06-13 18:43:11 -05:00
Scott Lahteine	f7792c0192	Group manual move options	2019-06-12 19:49:18 -05:00
Kaushik Vemparala	c88d9ae282	Option to leave heaters set on SD abort (#14251)	2019-06-10 23:57:55 -05:00
InsanityAutomation	b7eeb5b13b	Move BLTouch options to adv config (#14131) ... Plus other BLTouch and menu enhancements.	2019-06-10 17:46:42 -05:00
Scott Lahteine	0ca2073625	ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED => SD_ABORT_ON_ENDSTOP_HIT	2019-06-10 17:28:35 -05:00
teemuatlut	cccc51ee0e	TMC Square Wave Stepping mode (#14195)	2019-06-09 05:08:05 -05:00
InsanityAutomation	4138b1f9ae	Option to disable Case Light brightness control (#14165)	2019-06-07 07:23:42 -05:00
InsanityAutomation	123e58d9c3	Heated Chamber for Graphical LCD (#14190)	2019-05-30 18:31:50 -05:00
Scott Lahteine	7cce6b8d68	Bring configs up to date (MANUAL_FEEDRATE)	2019-05-25 16:31:13 -05:00
Scott Lahteine	9bf65eacaa	Remove old adv config heading	2019-05-19 15:24:01 -05:00
Scott Lahteine	785c01f2bc	Use US spelling of 'behavior'	2019-05-15 01:49:17 -05:00
chai-md	940ff8e7c8	Improve LV8729 stepping (#13776)	2019-05-11 19:02:19 -05:00
Tanguy Pruvot	11adcf1ce3	Add'l PLR options, AVR strstr_P compat (#13880)	2019-05-07 20:38:40 -05:00
Stephan	483822f3aa	Fix some THERMAL_PROTECTION_CHAMBER issues (#13678)	2019-05-06 19:55:01 -05:00
doggyfan	23a8707ef1	Configurable Thermistor (#13888)	2019-05-06 18:51:06 -05:00
InsanityAutomation	3fcab8dbf1	Option to disable fans during pause (#13820)	2019-05-04 15:50:44 -05:00
Robby Candra	0181e57417	Add a minimum Z change option to power-loss recovery (#13859)	2019-05-02 22:29:05 -05:00
Roxy-3D	142c8e2fed	Remove redundant Frivolous Game Options	2019-04-28 14:03:53 -05:00
Scott Lahteine	9ccbd382e7	Update Watchdog description	2019-04-27 14:56:12 +02:00
Bob-the-Kuhn	db89fc0304	Revert "bring my copy up to date" ... This reverts commit 503905c628.	2019-04-25 17:38:41 -05:00
Bob-the-Kuhn	503905c628	bring my copy up to date	2019-04-25 12:08:49 -05:00
Bob-the-Kuhn	520585c5ed	Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x	2019-04-17 15:34:29 -05:00
jmdearras	5f49b65c1f	Move LPC SD options to configs, add MKS_MINI_DISPLAY to SKR boards (#13712)	2019-04-15 22:55:33 -05:00
Bob-the-Kuhn	9dd4252b39	Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x	2019-04-12 22:07:12 -05:00
Stephan	84273557f9	Move and update heated chamber settings (#13671) ... Co-Authored-By: the-real-orca <stephan.veigl@gmail.com>	2019-04-12 15:38:10 -05:00
Scott Lahteine	cee3b172b9	Fix Marlin splash screen logic (#13646)	2019-04-10 17:14:57 -05:00
InsanityAutomation	ba31d39f6d	Azteeg X5 Mini support (#13425)	2019-04-08 23:10:45 -05:00
Scott Lahteine	9abe9aff56	Confirm before starting SD print (#13616)	2019-04-08 13:44:35 -05:00
Roxy-3D	9cee81d47e	Option to show babysteps total since G28 (#13580)	2019-04-06 18:04:34 -05:00
Scott Lahteine	3221658a78	Adjust park position description	2019-04-05 20:40:50 -05:00
Marcio Teixeira	27a4927ed1	Add option to move away from endstop after homing. (#13557) ... Add option to move away from endstop after homing. - Add `ENDSTOP_BACKOFF` for printers with a recessed Z home button (Lulzbot TAZ 6). - Also prevents chattering when sensorless homing with axes against bumpers.	2019-04-04 02:47:19 -05:00
Robby Candra	46445a5a16	Event G-code for Stop SD Print (#13547) ... Co-Authored-By: 7eggert <7eggert@gmx.de> Co-Authored-By: robbycandra <robbycandra.mail@gmail.com>	2019-04-02 22:09:30 -05:00
Scott Lahteine	8b7c3eec83	Games, for fun (and stress-testing) (#13464)	2019-04-01 17:48:54 -05:00
Scott Lahteine	5de7b5b35e	Games, for fun (and stress-testing) (#13464)	2019-04-01 15:43:48 -05:00
InsanityAutomation	7240e3a68f	Allow G26 with no heated bed (#13511)	2019-03-29 13:32:43 -05:00
Sam Lane	e3ab54753b	Add extra Linear Advance factors (#13490)	2019-03-26 04:02:27 -05:00
Scott Lahteine	d2e0c03afb	Remove trailing whitespace	2019-03-25 20:51:38 -05:00
7eggert	d96f7d6068	Minimum segments for G2/G3. Better for small arcs. (#13466)	2019-03-24 19:53:47 -05:00
Scott Lahteine	49cf92dc36	Extended condition macros (#13419) ... Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add: - Alias `ANY(...)` for `!DISABLED(...)` - Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...` - Alias `EITHER(A,B)` for `ANY(...)` - Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)` - `NONE(...)` for `DISABLED(...)`	2019-03-16 23:43:06 -05:00
InsanityAutomation	09eb30dc05	IDEX Mirror mode based on Formbot / Vivedino Symmetric mode (#13404)	2019-03-15 22:46:27 -05:00
Hadrien Jouet	0278ad0a6d	Add ESP32 WiFi interface (#11209)	2019-03-13 00:48:08 -05:00
InsanityAutomation	050eac03af	Single X Duplication Extension (#13373) ... * Multi-nozzle selective duplication * Use a bit-mask, reduce stepper_indirection.h size * Tweak the multi-nozzle duplication description * Use 'S' as a bool in M605 * Add HAS_DUPLICATION_MODE conditional * Remove '_MODE' from the option name * M605 in the style of Stacker M280 * Also include direct mask style (P)	2019-03-13 00:42:50 -05:00
Michiel Baird	b824a517aa	Add G38.4 and G38.5 (#13348)	2019-03-10 17:22:09 -05:00
Reece Kibble	dbead66988	Allows user to set (almost) any PWM frequency (#12638)	2019-03-08 02:15:42 -06:00
3dlabsio	645ca7af7a	M141 Heated Chamber, Temperature rework (#12201)	2019-03-07 02:09:39 -06:00
InsanityAutomation	bf8b38e0f7	Relocate configs above Marlin/src folder (#13299)	2019-03-03 16:50:56 -06:00
Scott Lahteine	998ce55be0	Alternative fan bitmap	2019-02-28 22:08:20 -06:00
Chris Pepper	4ab433d391	Fix binary protocol with one serial port (#13270) ... - The `sdcard.transfer_port` variable is Marlin's internal serial port index, not the physical serial port number. - Added packet number to "ok" response so hosts don't need to wait for the ACK. - Renamed feature to `BINARY_FILE_TRANSFER`, as the speed up is only consequential to the ability to transfer binaries over serial.	2019-02-27 19:57:48 -06:00
InsanityAutomation	eb4bf93ea4	Add more Babystep options (#13262)	2019-02-27 04:38:56 -06:00
Scott Lahteine	1424b368cf	Tweak M122 comment in configs	2019-02-19 16:20:18 -06:00
Scott Lahteine	e00aad84af	Add M240 parameters D I J R S	2019-02-14 20:00:40 -06:00
Scott Lahteine	d2bdb71c13	Add PHOTO_GCODE option, photo trigger physical move (#13168)	2019-02-14 15:09:35 -06:00
revilor	e56c13670d	Service interval watchdog (#13105)	2019-02-12 15:58:56 -06:00
InsanityAutomation	7f1b69b0c8	Add HOST_PROMPT_SUPPORT (#13039)	2019-02-12 15:55:47 -06:00
Scott Lahteine	0feeef2604	Update copyright in headers	2019-02-12 15:30:11 -06:00
Scott Lahteine	5a316664e5	Update chopper timing	2019-02-10 03:12:20 -06:00
Marcio Teixeira	e1604198ff	G425 — Auto-calibrate Backlash and Nozzle Offsets (#13050)	2019-02-06 17:20:17 -06:00
InsanityAutomation	413e303ad5	More Advanced Pause options (#12984)	2019-02-06 06:39:42 -06:00
teemuatlut	d81342254a	Support new TMC drivers (#13026)	2019-02-06 06:33:14 -06:00
Nicolas G	6fb4001b58	Add option to disable fan speed slowing in M303 (#13066)	2019-02-04 00:12:41 -06:00
Scott Lahteine	38c2ca9281	Clean up trailing whitespace	2019-02-03 23:00:57 -06:00
revilor	6a57d0b381	Prusa MMU2 (#12967)	2019-01-31 19:10:52 -06:00
Scott Lahteine	996f7d1642	Fix I2C_POSITION_ENCODERS commentary	2019-01-30 22:17:17 -06:00
InsanityAutomation	48a3502656	Remote streamer improvements (#12982)	2019-01-27 22:43:13 -06:00
Scott Lahteine	ae91914260	Prevent name conflicts with mixed stepper drivers	2019-01-24 01:25:28 -06:00
Scott Lahteine	0eca236dcd	Fix L6470 config comments	2019-01-24 00:58:16 -06:00
Bob Kuhn	2f35747f29	L6470 SPI daisy chain support (#12895)	2019-01-23 19:06:54 -06:00
Scott Lahteine	e1f951813a	Remove old block end comment	2019-01-20 02:30:03 -06:00
teemuatlut	e6805582a6	M569 to change stepping mode. Add new TMC section to LCD. (#12884)	2019-01-17 13:17:16 -06:00
teemuatlut	1a79878dff	Remove TMC_Z_CALIBRATION in favor of Z_STEPPER_AUTO_ALIGN	2019-01-12 18:07:28 -06:00
InsanityAutomation	082f6a27de	ADAPTIVE_FAN_SLOWING extension to hotend thermal protection (#12853)	2019-01-12 00:41:48 -06:00
Scott Lahteine	5f2d75f45b	Move PINS_DEBUGGING to @section develop	2019-01-08 20:05:05 -06:00
Kaushik Vemparala	ba7e35cbab	Add LCD option BEEP_ON_FEEDRATE_CHANGE (#12774)	2019-01-04 19:30:08 -06:00
Scott Lahteine	371d9a1acf	Fix line-endings, formatting, whitespace ... Followup to #12770	2018-12-30 15:38:20 -06:00
Ludy	cfc5e96b4b	Move JD to Config.h (and fix jerk->eeprom bug) (#12720)	2018-12-27 15:29:39 -06:00
teemuatlut	7a5e637a37	Add spreadCycle parameter sets (#12645)	2018-12-18 12:42:14 -06:00
Dave Johnson	9a4a463ec4	Sanity-check LIGHTWEIGHT_UI, move comment up (#12630)	2018-12-12 16:59:20 -06:00
teemuatlut	55144284c2	TMC connection test, spreadCycle parameters, improved debugging (#12616)	2018-12-09 20:54:48 -06:00
Marcio Teixeira	b22716e938	M425 Backlash Correction (#11061)	2018-12-08 14:36:46 -06:00
teemuatlut	50b2fbd031	Trinamic: Split stealthChop, improve driver monitoring, etc. (#12582)	2018-12-07 15:34:21 -06:00
Scott Lahteine	7a361ad36a	Alternative fan image option (#12579) ... * Alternative fan bitmap * Move bed over by 3px	2018-12-03 05:55:33 -06:00
Scott Lahteine	4f9ec9ab45	Add heating progress bars (#12543)	2018-11-27 21:15:52 -06:00
Scott Lahteine	b57343c255	Put status screen options in Configuration_adv.h	2018-11-23 23:15:07 -06:00
Scott Lahteine	1fcc13b011	Allow Serial Overrun Protection to be disabled	2018-11-23 21:07:38 -06:00
Scott Lahteine	30a49f5ee2	Apply extra condition to LCD_PROGRESS_BAR	2018-11-11 08:36:10 -06:00
revilor	b60abc7c37	[2.0.x] Macro G-codes (#9365)	2018-11-09 05:25:08 -06:00
InsanityAutomation	6471a75a22	Combine more tool-change variables (#12137)	2018-11-06 22:22:20 -06:00
Scott Lahteine	3866aeac52	Clean up ENCODER_RATE_MULTIPLIER config	2018-11-05 04:17:37 -06:00
Scott Lahteine	498dfa291e	Update and fix CHDK	2018-11-05 04:17:37 -06:00
Scott Lahteine	549d11225a	Add to description of Z_STEPPER_AUTO_ALIGN ... In response to #12272	2018-10-31 18:07:20 -05:00
Chris Pepper	66d44c72c3	Add fast binary file transfer to SD card option (#12249)	2018-10-30 19:44:12 -05:00
Scott Lahteine	9e663a624b	Apply #pragma once to configuration files	2018-10-30 18:35:12 -05:00
Scott Lahteine	98c32d8df1	Fix a config endif label	2018-10-30 18:28:16 -05:00
TheLongAndOnly	5536228359	G34 Auto-align multi-stepper Z axis (#11302)	2018-10-29 14:01:36 -05:00
Scott Lahteine	182b1405d9	LCD conditionals in configurations	2018-10-28 15:46:45 -05:00
Scott Lahteine	e8031b1152	Add Custom Microstepping options	2018-10-25 11:26:32 -05:00
TheSFReader	a07ac6312f	G0 feedrate may be fixed or variable (#12172)	2018-10-25 10:35:16 -05:00
Ludy	a93e9e6e9b	Use preheat labels in place of PLA/ABS (#12194)	2018-10-23 15:38:17 -05:00
Scott Lahteine	9090065e9f	Move EXTRA_FAN_SPEED above FWRETRACT	2018-10-19 15:15:00 -05:00
Scott Lahteine	67a3c5a16a	Alternative info screen (Prusa-style) (#12132) ... * Fix Z value display * Add HAS_PRINT_PROGRESS * Alternative Info Screen option * Add LCD_INFO_SCREEN_STYLE to example configs	2018-10-18 11:34:52 -05:00
InsanityAutomation	3ec3872730	Single Z raise value for all tool-changing / parking (#12090) ... * Universal tool-change Z lift * Add TOOLCHANGE_ZRAISE to example configs * Park/unpark changes to example configs * Implement DEBUG_DXC_MODE	2018-10-17 11:11:41 -05:00
Scott Lahteine	8bf596bd4c	RETRACT_ZLIFT => RETRACT_ZRAISE	2018-10-16 16:46:40 -05:00
Scott Lahteine	84b59d58fb	Clean up whitespace	2018-10-16 02:02:20 -05:00
TheSFReader	af939c158a	Option for G0 to have a separate feedrate (#12089)	2018-10-16 01:49:51 -05:00
Scott Lahteine	43940d59ed	Fix trailing spaces	2018-10-10 16:24:35 -05:00
Scott Lahteine	cf5284cdf2	Add SD Firmware Update capability (#12043) ... Co-Authored-By: timoxd7 <timoxd7@users.noreply.github.com>	2018-10-09 20:00:47 -05:00
Scott Lahteine	07db08e39d	Fix EXTRUDER_AUTO_FAN_SPEED comment	2018-10-06 19:51:17 -05:00
Scott Lahteine	ca0e308105	Fix up some units comments	2018-10-06 19:45:50 -05:00
Scott Lahteine	52a37913c1	Extend and apply some corrections	2018-10-06 00:27:21 -05:00
thesfreader	e09c144674	Add CNC-like G-code options	2018-10-06 00:15:27 -05:00
Marcio Teixeira	2067619a26	Add USB_FLASH_DRIVE_SUPPORT	2018-10-04 19:54:12 -05:00
Scott Lahteine	bb561baf9e	Tweak some config comments	2018-10-04 02:42:12 -05:00
Thomas Moore	ab4549d2bc	[2.0.x] Add simultaneous retraction for mixing extruder (#11941)	2018-10-01 23:32:02 -05:00
dot-bob	b0fd8f2d74	Add option to move Z on double-click when idle	2018-10-01 01:41:11 -05:00
Scott Lahteine	e78bdd654d	Clean up BABYSTEP options	2018-10-01 01:29:21 -05:00
Scott Lahteine	3c40933713	Remove trailing spaces, old comment	2018-09-30 20:47:06 -05:00
Thomas Moore	3286325044	Add TMC2130 sensorless probing	2018-09-29 18:54:14 -05:00
Victor Tseng	93839e2f73	Add option to enable/disable autoretract altogether (#11904)	2018-09-28 16:52:56 -05:00
Scott Lahteine	241168926d	Update some configs	2018-09-27 16:42:59 -05:00
Scott Lahteine	cee34f7290	Followup for BABYSTEP_HOTEND_Z_OFFSET (#11916)	2018-09-24 21:46:56 -04:00
teemuatlut	884ad75cb8	Update config files	2018-09-24 17:26:18 -04:00
InsanityAutomation	1104054d73	2.0 IDEX Independent z offset and other fixes (#11862) ... * Add Formbot Raptor board Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com> * Add a second Z probe Z offset Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com> * Modify method to utilize live adjustment of hotend z offset Should probably move config option to babystepping and rename as it may now apply to all multiextruder systems * Move config item and catchup other code to current method	2018-09-24 09:40:48 -05:00
Scott Lahteine	ddcbf80f23	Followup for Z_TRIPLE_ENDSTOPS	2018-09-23 12:22:31 -04:00
Roxy-3D	d3d6be8210	Add MAX7219 reverse units option (#11860)	2018-09-19 18:54:51 -05:00
InsanityAutomation	f38570ac55	Add custom user menu title (#11769)	2018-09-19 15:04:34 -05:00
Scott Lahteine	f5c210d33d	Config changes supporting up to 6 extruders	2018-09-16 22:22:35 -05:00
Holger Müller	1a6f2b29b8	Add support for Triple-Z steppers/endstops	2018-09-16 00:35:58 -05:00
Scott Lahteine	f79a5a9dee	Tweak spacing of L6470 options	2018-09-12 23:18:11 -05:00
Sam Lane	1b6bc19427	Add external closed loop controller support	2018-09-10 03:17:17 -05:00
Marcio Teixeira	beb51c2d58	Show manual extrusion moves as relative in LCD ... - Implements FR#11724 - Old behavior can be restored by commenting out MANUAL_E_MOVES_RELATIVE	2018-09-06 02:00:25 -05:00
Scott Lahteine	e3fc9aa35f	Update some config comments	2018-08-31 16:03:44 -05:00
Michael Triffon	f8c52c9c29	Azteeg X5 Mini WiFi support (#11601)	2018-08-21 23:58:26 -05:00
Scott Lahteine	2d3317a35b	Prettify Dual X Carriage description	2018-08-21 23:34:29 -05:00
Greg Nutt	a1a5367380	Smoothieboard V1.0/1.1 and A5984 support	2018-08-09 23:03:17 -05:00
Scott Lahteine	9c62c47579	[2.0.x] Fix Dual X Carriage tool change crash (#11447)	2018-08-03 20:47:29 -05:00
teemuatlut	fbcdf5eaeb	Simplify stepper driver per-axis selection	2018-07-25 02:47:43 -05:00
Roxy-3D	9660996cc3	Add Multi Unit Support for Max7219 to bugfix_2.0.0 (#11285) ... * Add Multi Unit Support for Max7219 to bugfix_2.0.0 * Apply multi-MAX7219 to example configs * Tweak some spacing, macros	2018-07-19 13:56:47 -05:00
Scott Lahteine	665ac1e4d0	Add POWER_LOSS_PIN support	2018-07-18 19:55:10 -05:00
Scott Lahteine	e0ab8acf19	Add "Marlin Dev Mode" option	2018-07-02 22:55:21 -05:00
Scott Lahteine	bd7f5848f1	Remove JUNCTION_DEVIATION_INCLUDE_E option (#11147)	2018-06-29 22:42:05 -05:00
etagle	5b49fccf80	Add stepper driver DIR delay configuration option ... ...and recommended pulse width configuration for A4988	2018-06-26 13:28:04 -05:00
Scott Lahteine	d4795e5b8e	[2.0.x] Tweaks and additions for MAX7219 (#11034)	2018-06-18 22:04:03 -05:00
Simon Jouet	e2aeda61ed	HAL for Espressif ESP32 Wifi	2018-06-13 19:33:35 -05:00
etagle	6f14bcaa3e	Add MAXIMUM_STEPPER_RATE, enforce in multi-stepping ... The timing value should be properly set for ALL boards. The compiler will check and set maximum step rate calculations based on those values.	2018-06-10 16:02:47 -05:00
etagle	39a7e7720d	Adaptive multiaxis step smoothing ... - Stepper bugs fixed - Support MIXING_EXTRUDER with Linear Advance - Miscellaneous cleanup	2018-06-10 16:02:47 -05:00
Scott Lahteine	8a376e6beb	Update MINIMUM_STEPPER_PULSE description	2018-06-10 00:13:03 -05:00
Scott Lahteine	2deff0d9b9	Fix/Improve junction deviation ... - Respect axis max acceleration limits instead of forcing a fixed acceleration value. - The `junction_unit_vec` ensures proper handling of entry and exit speeds even when the axes involved have different limits.	2018-05-31 20:09:53 -05:00
Scott Lahteine	2e139fe50f	Tweak configuration spacing	2018-05-26 18:33:51 -05:00
Scott Lahteine	931ab4ec40	Rename Junction Deviation options	2018-05-26 18:33:51 -05:00
Jiri Jaburek	43ddb29f9e	Add FAN_MAX_PWM for M106-controlled fans	2018-05-15 21:18:46 -05:00
Scott Lahteine	acacee80a2	Add JUNCTION_ACCELERATION_FACTOR to configs ... Part of #10688 Co-Authored-By: ejtagle <ejtagle@hotmail.com>	2018-05-11 23:13:27 -05:00
Scott Lahteine	4d4bf7897d	Junction Deviation jerk limiting option	2018-05-08 10:08:54 -05:00
Scott Lahteine	840ff60952	Bring some configs up to date	2018-05-06 02:42:27 -05:00
nightdemonx	e911635fb1	Add thermocouple with AD8495 support	2018-05-02 08:43:16 -05:00
Scott Lahteine	05c33833e7	[2.0.x] Add NO_LCD_MENUS option (#10582)	2018-04-30 21:16:31 -05:00
Scott Lahteine	11ab017dd0	Creality3D Power-Loss Recovery	2018-04-21 21:56:50 -05:00
Marcio Teixeira	5cc7916e69	Add G29_RETRY_AND_RECOVER feature ... - Add an option to retry G29, optionally executing a G-code procedure after each failed probe.	2018-04-19 19:45:53 -05:00
Sean	2d9b0a66fe	Add Filament Change accelerations	2018-04-09 23:57:27 -05:00
Lenbok	0e8242180d	Chamber temperature monitoring and auto fan control. ... This is an initial cut for feedback, updated for 2.0.x. Chamber temperature is currently reported along with hot end and bed temperatures to serial. The format is just like that used for hot end and bed temperatures, but using 'C' prefix. As there is no heater, target is always 0. Is this appropriate, is there a better way to report chamber temperatures? Chamber temperatures are not reported on the LCD in any way. When auto chamber fan is enabled, it currently just uses the same temperature threshold as the other auto controlled fans. As the chamber temperature is not connected to any heater, it doesn't undergo mintemp/maxtemp monitoring. This would need to change in the future if chamber heating became a feature.	2018-04-06 23:09:06 -05:00
Sean	2fa0a73c2c	Implement filament change continuous purge	2018-04-04 20:57:51 -05:00
Scott Lahteine	1d22609473	MIN_PROBE_EDGE replaces DELTA_PROBEABLE_RADIUS	2018-03-19 04:11:46 -05:00
Marcio Teixeira	c24dbcbfe1	When STATUS_EXPIRE_SECONDS is 0, hide the position. (#10081) ... Some users may prefer to hide the position updates on the `LIGHTWEIGHT_UI` altogether. This leads to an even less cluttered display (it also saves on SPI traffic and one byte of RAM).	2018-03-14 02:44:30 -05:00
Studiodyne	e7a61de8af	[2.0] FWRetract Reset (Best way) (#10083)	2018-03-14 01:35:30 -05:00
Scott Lahteine	e7570f3195	Improve TMC config organization, naming	2018-03-14 00:18:41 -05:00
Bob-the-Kuhn	6b4a928145	2uS default step pulse (#9989)	2018-03-07 21:11:01 -06:00
Scott Lahteine	94f5204629	Move AUTO_REPORT_SD_STATUS to SDSUPPORT block	2018-03-07 01:50:30 -06:00
Scott Lahteine	b198b49d15	Followup to AUTO_REPORT_SD_STATUS ... Followup to #9832	2018-03-07 00:13:42 -06:00
Studiodyne	23a576faf7	[2.0] Fix for FW retract (#9878)	2018-03-01 15:15:40 -06:00
Scott Lahteine	b8485528b2	Prettify LCD_PROGRESS_BAR options	2018-02-23 19:19:57 -06:00
Scott Lahteine	e65a853c59	Fix LCD_PROGRESS_BAR ... Fix #9208	2018-02-23 14:05:10 -06:00
Scott Lahteine	2bd252b501	[2.0.x] LIN_ADVANCE v1.5 (#9712)	2018-02-23 00:53:29 -06:00
Marcio Teixeira	532bb3aaa1	Lightweight status screen for ST7920 ... - This status screen uses the ST7920 character generator to greatly reduce SPI traffic and MCU load when updating the status screen. - Has been tested with the RepRapDiscount Full Graphics Smart Controller but should work with any LCD that uses an ST7920 or fully compatible controller.	2018-02-22 00:10:43 -06:00
Scott Lahteine	59c98d6fd5	Hephestos2 heated bed kit for all (#9757)	2018-02-21 22:27:09 -06:00
Kevin	9019ea0fce	Option to force X or Y to home first when homing the other axis	2018-02-18 01:11:41 -06:00
blye	330437ad7c	Update LCD_SET_PROGRESS_MANUALLY in configs	2018-02-17 08:12:10 -06:00
Bob-the-Kuhn	349dafa728	config update (set to -1)	2018-02-15 21:42:54 -06:00
Scott Lahteine	5b70d3da1c	Update DIGIPOT_I2C_MOTOR_CURRENTS comments	2018-02-13 22:54:12 -06:00
Scott Lahteine	694d2ebec0	TMC SW SPI pins in Configuration_adv.h ... Counterpart to #9632	2018-02-08 18:49:38 -06:00
Thomas Moore	1541224a81	Enable Z axis and delta sensorless homing (#9516)	2018-02-08 04:20:44 -06:00
Scott Lahteine	b2f8b4ada5	I2C position encoders update (#9533) ... Updating I2C position encoders to enable babystepping and Babystep XY when using the ecm microstep correction method. Also changed default method to ECM microstep.	2018-02-08 03:57:11 -06:00
Manuel Valentino	374f2a5e16	[2.0.x] Fixed wrong information about TMC2208 wiring (#9335)	2018-02-02 04:45:55 -06:00
teemuatlut	5c69d45f5b	[2.0.x] TMC2130 support for LPC platform (#9114)	2018-02-01 21:49:40 -06:00
Scott Lahteine	8190fdb260	[2.0.x] Option to use Neopixel as case light (#9270) ... * Add option to use Neopixel as case light * Apply CASE_LIGHT_USE_NEOPIXEL to example configs	2018-01-20 16:58:41 -06:00
Scott Lahteine	02ff12d491	More up front option to show SD percentage	2018-01-14 23:32:39 -06:00
Scott Lahteine	5c076a6d93	Improved M915 description	2018-01-09 18:56:27 -06:00
teemuatlut	cdc61ebf53	Add M915 configuration option	2018-01-09 18:28:48 +02:00
Scott Lahteine	7541316bb4	Add M701/M702 Filament Load/Unload, M603	2018-01-04 15:07:37 -06:00
Scott Lahteine	2929c9e56f	A specific option to SLIM_LCD_MENUS	2017-12-31 00:11:22 -06:00
Scott Lahteine	f704f405af	Add pause/resume actions on M600, M125	2017-12-25 01:39:18 -06:00
Thomas Moore	f0a8a1a853	[2.0.x] Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE (#8866) ... * Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE	2017-12-25 01:38:06 -06:00
Scott Lahteine	fdc5e72720	A single setting to validate filament width	2017-12-19 21:33:25 -06:00
Scott Lahteine	933f76fda3	Option to disable all volumetric extrusion	2017-12-19 19:51:25 -06:00
robpower	5595098063	V2 Extended NanoDLP_Z_Move_Sync to G4 & G28,Added all axis option.	2017-12-15 16:22:55 -06:00
teemuatlut	0cd1e91056	[2.0.x] TMC driver update (#8769)	2017-12-15 15:03:14 -06:00
Scott Lahteine	ae663a4198	PROBE_DOUBLE_TOUCH => MULTIPLE_PROBING	2017-12-07 16:44:13 -06:00
Scott Lahteine	8f90642eea	LED_CONTROL_MENU config changes	2017-11-29 21:02:56 -06:00
Tannoo	cf0f78336b	New Feature: LED_CONTROL_MENU	2017-11-29 21:02:55 -06:00
Scott Lahteine	a67cf78c6b	Clean up whitespace, spacing	2017-11-26 20:18:52 -06:00
Scott Lahteine	7be4857ab9	Tweak BLOCK_BUFFER_SIZE description	2017-11-26 17:36:40 -06:00
Scott Lahteine	5926c9c97b	Followup for MESH_EDIT_GFX_OVERLAY	2017-11-24 15:53:25 -06:00
Scott Lahteine	dc82babe8e	Implement NANODLP_Z_SYNC for 2.0.x	2017-11-24 00:28:06 -06:00
Scott Lahteine	54774841ba	Merge pull request #8416 from thinkyhead/bf2_M114_DETAIL ... [2.0] Add M114_DETAIL to Configuration_adv.h	2017-11-14 00:28:55 -06:00
Scott Lahteine	009e3a7aa7	Add M114_DETAIL to Configuration_adv.h	2017-11-14 00:03:17 -06:00
Scott Lahteine	3f0a982b8c	Move Filament Width Sensor to Configuration_adv.h	2017-11-13 21:05:57 -06:00
Scott Lahteine	95ea43bde4	Update XYZ dual stepper configurations	2017-11-08 20:31:43 -06:00
Roxy-3D	ed62c621d7	Fix G26 Circle Drawing. Add Default Extrusion Settings (#8313) ... - Fix G26 Circle Drawing. - Add default extrusion settings so machine can print lines on print bed - Yet to be done: Get LCD Menu's to use these settings.	2017-11-07 17:13:53 -06:00
Scott Lahteine	2c099fd4c2	Update Thermal Protection Documentation	2017-11-07 15:46:44 -06:00
Scott Lahteine	1b42fba39b	Add CNC_COORDINATE_SYSTEMS to configs	2017-11-04 22:28:46 -05:00
Scott Lahteine	ce1c9c0808	Tweak QUICK_HOME description	2017-10-29 23:48:13 -05:00
Scott Lahteine	e04425281d	Add Dual Steppers / Endstops to configs	2017-10-29 18:56:04 -05:00
Scott Lahteine	edff2c917b	Cleanup for DIGIPOTS settings	2017-10-29 18:56:03 -05:00
Scott Lahteine	6b1d1a818b	Revert default BABYSTEP_MULTIPLICATOR to 1	2017-10-27 19:45:44 -05:00
Scott Lahteine	7fad26549b	Concise SD_REPRINT_LAST_SELECTED_FILE description	2017-10-26 23:33:02 -05:00
Roxy-3D	3f5f39576b	Reprint option for last SD Memory card file (#8106) ... * Re-Print of same SD Memory Card file with single click * Re-Print of same SD Memory Card file with single click * This is the bugfix-v2.0.0 version of https://github.com/MarlinFirmware/Marlin/pull/8104	2017-10-26 15:50:18 -05:00
Scott Lahteine	7f55d82fd1	Move UBL_SAVE_ACTIVE_ON_M500 to Configuration.h	2017-10-24 18:26:43 -05:00
Scott Lahteine	580b6e9089	Apply physical limits to mesh bounds	2017-10-24 16:54:07 -05:00
Scott Lahteine	3d2b2eb1ca	Prevent SDCARD_SORT_ALPHA from exploding	2017-10-20 19:13:21 -05:00
Scott Lahteine	783ddf9691	Add SCROLL_LONG_FILENAMES option	2017-10-20 19:13:21 -05:00
Thomas Moore	67cc29cd3c	Update UBL mesh boundaries to accomidate beds centered at 0, 0 (#8012)	2017-10-18 10:03:30 -05:00
Scott Lahteine	ce48403a0b	Add EXTRA_FAN_SPEED feature ... Based on #7883 by @studiodyne	2017-10-16 02:34:13 -05:00
Scott Lahteine	5c4f3e0107	Add LCD_SET_PROGRESS_MANUALLY	2017-10-15 03:05:29 -05:00
Bob-the-Kuhn	4e3ee845b9	config_adv (#7941) ... get rid of twi.h move to board files	2017-10-11 15:42:24 -05:00
Scott Lahteine	b30b55307c	Merge pull request #7909 from thinkyhead/bf2_goodbye_legacy_advance ... [2.0.x] Remove legacy ADVANCE feature	2017-10-10 00:31:18 -05:00
Scott Lahteine	560d366b80	Move VIKI SCK/MOSI pins fix to Conditionals_POST.h	2017-10-09 16:13:49 -05:00
Scott Lahteine	03f4891fb9	Remove legacy ADVANCE feature	2017-10-09 04:25:18 -05:00
Scott Lahteine	508d764d63	Add serial XON/XOFF handshaking ... From @ejtagle, originally #7459	2017-10-02 04:12:30 -05:00
Tannoo	c869dc9745	User script return-to-status option	2017-09-27 11:31:38 -05:00
Scott Lahteine	ce1638e32f	Add Babystep Z graphic overlay ... See PR #7593	2017-09-27 01:25:05 -05:00
Scott Lahteine	981a610f75	Disable BABYSTEP_XY, add to SDSORT comment	2017-09-27 00:48:59 -05:00
Scott Lahteine	2281154025	Increase BABYSTEP_MULTIPLICATOR to 100	2017-09-27 00:48:46 -05:00
Scott Lahteine	f37ed314e0	Friendly layout for Arduino IDE	2017-09-21 16:27:13 -05:00