2015-12-23 15:13:49 +00:00
/**
* English
*
* LCD Menu Messages
* Please note these are limited to 17 characters !
*
*/
2016-08-05 16:50:46 +00:00
# define(length=20) WELCOME_MSG CUSTOM_MENDEL_NAME " ready."
2015-12-23 15:13:49 +00:00
# define MSG_SD_INSERTED "Card inserted"
# define MSG_SD_REMOVED "Card removed"
# define MSG_MAIN "Main"
# define MSG_DISABLE_STEPPERS "Disable steppers"
# define MSG_AUTO_HOME "Auto home"
# define MSG_SET_HOME_OFFSETS "Set home offsets"
# define MSG_SET_ORIGIN "Set origin"
# define MSG_COOLDOWN "Cooldown"
# define MSG_SWITCH_PS_ON "Switch power on"
# define MSG_SWITCH_PS_OFF "Switch power off"
# define MSG_MOVE_AXIS "Move axis"
# define MSG_MOVE_X "Move X"
# define MSG_MOVE_Y "Move Y"
# define MSG_MOVE_Z "Move Z"
# define MSG_MOVE_E "Extruder"
# define MSG_SPEED "Speed"
# define MSG_NOZZLE "Nozzle"
# define MSG_NOZZLE1 "Nozzle2"
# define MSG_NOZZLE2 "Nozzle3"
# define MSG_BED "Bed"
2017-02-14 10:52:48 +00:00
# define(length=14) MSG_FAN_SPEED "Fan speed"
2015-12-23 15:13:49 +00:00
# define MSG_FLOW "Flow"
# define MSG_FLOW0 "Flow 0"
# define MSG_FLOW1 "Flow 1"
# define MSG_FLOW2 "Flow 2"
# define MSG_CONTROL "Control"
# define MSG_MIN " \002 Min"
# define MSG_MAX " \002 Max"
# define MSG_FACTOR " \002 Fact"
# define MSG_TEMPERATURE "Temperature"
# define MSG_MOTION "Motion"
# define MSG_VOLUMETRIC "Filament"
# define MSG_VOLUMETRIC_ENABLED "E in mm3"
# define MSG_STORE_EPROM "Store memory"
# define MSG_LOAD_EPROM "Load memory"
# define MSG_RESTORE_FAILSAFE "Restore failsafe"
2016-06-20 11:46:37 +00:00
# define MSG_REFRESH "\xF8" "Refresh"
2015-12-23 15:13:49 +00:00
# define MSG_WATCH "Info screen"
# define MSG_TUNE "Tune"
# define MSG_PAUSE_PRINT "Pause print"
# define MSG_RESUME_PRINT "Resume print"
# define MSG_STOP_PRINT "Stop print"
# define MSG_CARD_MENU "Print from SD"
# define MSG_NO_CARD "No SD card"
# define MSG_DWELL "Sleep..."
# define MSG_USERWAIT "Wait for user..."
# define MSG_RESUMING "Resuming print"
2016-08-05 16:50:46 +00:00
# define(length=20) MSG_PRINT_ABORTED "Print aborted"
2015-12-23 15:13:49 +00:00
# define MSG_NO_MOVE "No move."
# define MSG_KILLED "KILLED. "
# define MSG_STOPPED "STOPPED. "
# define MSG_FILAMENTCHANGE "Change filament"
# define MSG_INIT_SDCARD "Init. SD card"
# define MSG_CNG_SDCARD "Change SD card"
# define MSG_BABYSTEP_X "Babystep X"
# define MSG_BABYSTEP_Y "Babystep Y"
2016-02-03 12:03:50 +00:00
# define MSG_BABYSTEP_Z "Live adjust Z"
2017-02-14 10:52:48 +00:00
# define MSG_ADJUSTZ "Auto adjust Z?"
2016-04-28 12:50:25 +00:00
# define MSG_PICK_Z "Pick print"
2015-12-23 15:13:49 +00:00
# define MSG_SETTINGS "Settings"
# define MSG_PREHEAT "Preheat"
# define MSG_UNLOAD_FILAMENT "Unload filament"
# define MSG_LOAD_FILAMENT "Load filament"
# define MSG_RECTRACT "Rectract"
# define MSG_ERROR "ERROR:"
2016-08-05 16:50:46 +00:00
# define(length=20) MSG_PREHEAT_NOZZLE "Preheat the nozzle!"
2015-12-23 15:13:49 +00:00
# define MSG_SUPPORT "Support"
2016-08-05 16:50:46 +00:00
# define(length=20) MSG_CORRECTLY "Changed correctly?"
2015-12-23 15:13:49 +00:00
# define MSG_YES "Yes"
2016-02-03 12:03:50 +00:00
# define MSG_NO "No"
2016-08-05 16:50:46 +00:00
# define(length=19) MSG_NOT_LOADED "Filament not loaded"
2015-12-23 15:13:49 +00:00
# define MSG_NOT_COLOR "Color not clear"
2016-08-05 16:50:46 +00:00
# define(length=20) MSG_LOADING_FILAMENT "Loading filament"
# define(length=20) MSG_PLEASE_WAIT "Please wait"
2015-12-23 15:13:49 +00:00
# define MSG_LOADING_COLOR "Loading color"
# define MSG_CHANGE_SUCCESS "Change success!"
2017-01-25 17:54:54 +00:00
# define(length=20) MSG_PRESS "and press the knob"
2016-08-05 16:50:46 +00:00
# define(length=20) MSG_INSERT_FILAMENT "Insert filament"
# define(length=20) MSG_CHANGING_FILAMENT "Changing filament!"
2015-12-23 15:13:49 +00:00
2016-02-03 12:03:50 +00:00
# define MSG_SILENT_MODE_ON "Mode [silent]"
# define MSG_SILENT_MODE_OFF "Mode [high power]"
2016-08-05 16:50:46 +00:00
# define(length=20) MSG_REBOOT "Reboot the printer"
# define(length=20) MSG_TAKE_EFFECT " for take effect"
2016-02-03 12:03:50 +00:00
2015-12-23 15:13:49 +00:00
# define MSG_Enqueing "enqueing \""
# define MSG_POWERUP "PowerUp"
# define MSG_CONFIGURATION_VER " Last Updated: "
# define MSG_FREE_MEMORY " Free Memory: "
# define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
# define MSG_OK "ok"
# define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line: "
# define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line: "
# define MSG_BEGIN_FILE_LIST "Begin file list"
# define MSG_END_FILE_LIST "End file list"
# define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
# define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
# define MSG_M200_INVALID_EXTRUDER "M200 Invalid extruder "
# define MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder "
# define MSG_M221_INVALID_EXTRUDER "M221 Invalid extruder "
# define MSG_ERR_NO_THERMISTORS "No thermistors - no temperature"
# define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
2016-05-31 12:08:04 +00:00
# define MSG_HEATING "Heating"
2016-08-05 17:03:55 +00:00
# define(length=20) MSG_HEATING_COMPLETE "Heating done."
2016-05-31 12:08:04 +00:00
# define MSG_BED_HEATING "Bed Heating"
# define MSG_BED_DONE "Bed done"
# define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1.0.2; Sprinter / grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" CUSTOM_MENDEL_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
2015-12-23 15:13:49 +00:00
# define MSG_ERR_KILLED "Printer halted. kill() called!"
# define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
# define MSG_RESEND "Resend: "
# define MSG_M119_REPORT "Reporting endstop status"
# define MSG_ENDSTOP_HIT "TRIGGERED"
# define MSG_ENDSTOP_OPEN "open"
# define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
# define MSG_SD_INIT_FAIL "SD init fail"
# define MSG_SD_VOL_INIT_FAIL "volume.init failed"
# define MSG_SD_OPENROOT_FAIL "openRoot failed"
# define MSG_SD_CARD_OK "SD card ok"
# define MSG_SD_WORKDIR_FAIL "workDir open failed"
# define MSG_SD_OPEN_FILE_FAIL "open failed, File: "
# define MSG_SD_FILE_OPENED "File opened: "
# define MSG_SD_FILE_SELECTED "File selected"
# define MSG_SD_WRITE_TO_FILE "Writing to file: "
# define MSG_SD_PRINTING_BYTE "SD printing byte "
# define MSG_SD_NOT_PRINTING "Not SD printing"
# define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
# define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir: "
# define MSG_STEPPER_TOO_HIGH "Steprate too high: "
# define MSG_ENDSTOPS_HIT "endstops hit: "
# define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
# define MSG_BABYSTEPPING_X "Babystepping X"
# define MSG_BABYSTEPPING_Y "Babystepping Y"
2016-02-03 12:03:50 +00:00
# define MSG_BABYSTEPPING_Z "Adjusting Z"
2015-12-23 15:13:49 +00:00
# define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"
2016-02-19 16:54:24 +00:00
# define MSG_LANGUAGE_NAME "English"
2016-08-05 16:50:46 +00:00
# define MSG_LANGUAGE_SELECT "Select language"
2016-05-31 12:08:04 +00:00
# define MSG_PRUSA3D "prusa3d.com"
# define MSG_PRUSA3D_FORUM "forum.prusa3d.com"
# define MSG_PRUSA3D_HOWTO "howto.prusa3d.com"
# define MSG_SELFTEST_ERROR "Selftest error !"
# define MSG_SELFTEST_PLEASECHECK "Please check :"
# define MSG_SELFTEST_NOTCONNECTED "Not connected"
# define MSG_SELFTEST_HEATERTHERMISTOR "Heater / Thermistor"
# define MSG_SELFTEST_BEDHEATER "Bed / Heater"
# define MSG_SELFTEST_WIRINGERROR "Wiring error"
# define MSG_SELFTEST_ENDSTOPS "Endstops"
# define MSG_SELFTEST_MOTOR "Motor"
# define MSG_SELFTEST_ENDSTOP "Endstop"
# define MSG_SELFTEST_ENDSTOP_NOTHIT "Endstop not hit"
# define MSG_SELFTEST_OK "Self test OK"
2017-01-09 12:12:39 +00:00
# define MSG_LOOSE_PULLEY "Loose pulley"
2016-10-19 07:55:56 +00:00
2017-02-14 10:52:48 +00:00
# define(length=20) MSG_SELFTEST_FAN "Fan test";
2016-10-21 17:15:02 +00:00
# define(length=20) MSG_SELFTEST_COOLING_FAN "Front print fan?";
# define(length=20) MSG_SELFTEST_EXTRUDER_FAN "Left hotend fan?";
2016-10-13 08:40:15 +00:00
# define MSG_SELFTEST_FAN_YES "Spinning";
# define MSG_SELFTEST_FAN_NO "Not spinning";
2016-10-19 07:55:56 +00:00
2016-08-05 16:50:46 +00:00
# define(length=20) MSG_STATS_TOTALFILAMENT "Total filament :"
# define(length=20) MSG_STATS_TOTALPRINTTIME "Total print time :"
# define(length=20) MSG_STATS_FILAMENTUSED "Filament used: "
# define(length=20) MSG_STATS_PRINTTIME "Print time: "
# define(length=20) MSG_SELFTEST_START "Self test start "
# define(length=20) MSG_SELFTEST_CHECK_ENDSTOPS "Checking endstops"
# define(length=20) MSG_SELFTEST_CHECK_HOTEND "Checking hotend "
# define(length=20) MSG_SELFTEST_CHECK_X "Checking X axis "
# define(length=20) MSG_SELFTEST_CHECK_Y "Checking Y axis "
# define(length=20) MSG_SELFTEST_CHECK_Z "Checking Z axis "
# define(length=20) MSG_SELFTEST_CHECK_BED "Checking bed "
# define(length=20) MSG_SELFTEST_CHECK_ALLCORRECT "All correct "
2016-05-31 12:08:04 +00:00
# define MSG_SELFTEST "Selftest "
2016-08-05 16:50:46 +00:00
# define(length=20) MSG_SELFTEST_FAILED "Selftest failed "
2016-05-31 12:08:04 +00:00
# define MSG_STATISTICS "Statistics "
# define MSG_USB_PRINTING "USB printing "
# define MSG_HOMEYZ "Calibrate Z"
# define MSG_HOMEYZ_PROGRESS "Calibrating Z"
# define MSG_HOMEYZ_DONE "Calibration done"
2016-07-04 17:00:42 +00:00
# define MSG_SHOW_END_STOPS "Show end stops"
2016-08-05 11:34:21 +00:00
# define MSG_CALIBRATE_BED "Calibrate XYZ"
# define MSG_CALIBRATE_BED_RESET "Reset XYZ calibr."
2016-06-16 12:29:04 +00:00
2016-09-01 15:05:15 +00:00
# define(length=20,lines=8) MSG_MOVE_CARRIAGE_TO_THE_TOP "Calibrating XYZ. Rotate the knob to move the Z carriage up to the end stoppers. Click when done."
# define(length=20,lines=8) MSG_MOVE_CARRIAGE_TO_THE_TOP_Z "Calibrating Z. Rotate the knob to move the Z carriage up to the end stoppers. Click when done."
2016-08-08 17:17:19 +00:00
2016-08-05 16:50:46 +00:00
# define(length=20,lines=8) MSG_CONFIRM_NOZZLE_CLEAN "Please clean the nozzle for calibration. Click when done."
2016-08-05 14:03:38 +00:00
# define(length=20,lines=2) MSG_CONFIRM_CARRIAGE_AT_THE_TOP "Are left and right Z~carriages all up?"
2016-06-16 12:29:04 +00:00
2016-09-01 15:05:15 +00:00
# define(length=60) MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 "Searching bed calibration point"
# define(length=14) MSG_FIND_BED_OFFSET_AND_SKEW_LINE2 " of 4"
# define(length=60) MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1 "Improving bed calibration point"
# define(length=14) MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 " of 9"
# define(length=60) MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 "Measuring reference height of calibration point"
# define(length=14) MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2 " of 9"
2015-12-23 15:13:49 +00:00
2016-08-05 16:50:46 +00:00
# define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND "XYZ calibration failed. Bed calibration point was not found."
# define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED "XYZ calibration failed. Please consult the manual."
2016-10-19 07:55:56 +00:00
# define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_PERFECT "XYZ calibration ok. X / Y axes are perpendicular. Congratulations!"
2017-01-31 09:26:36 +00:00
# define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD "XYZ calibration all right. X / Y axes are slightly skewed. Good job!"
# define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME "XYZ callibration all right. Skew will be corrected automatically."
2016-08-05 16:50:46 +00:00
# define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR "XYZ calibration failed. Left front calibration point not reachable."
# define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR "XYZ calibration failed. Right front calibration point not reachable."
# define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR "XYZ calibration failed. Front calibration points not reachable."
# define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR "XYZ calibration compromised. Left front calibration point not reachable."
# define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR "XYZ calibration compromised. Right front calibration point not reachable."
# define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR "XYZ calibration compromised. Front calibration points not reachable."
2016-07-04 17:00:42 +00:00
2016-08-05 14:03:38 +00:00
# define(length=20,lines=4) MSG_BED_LEVELING_FAILED_POINT_LOW "Bed leveling failed. Sensor didnt trigger. Debris on nozzle? Waiting for reset."
# define(length=20,lines=4) MSG_BED_LEVELING_FAILED_POINT_HIGH "Bed leveling failed. Sensor triggered too high. Waiting for reset."
# define(length=20,lines=4) MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED "Bed leveling failed. Sensor disconnected or cable broken. Waiting for reset."
2016-07-04 17:00:42 +00:00
2016-08-05 16:50:46 +00:00
# define(length=20,lines=2) MSG_NEW_FIRMWARE_AVAILABLE "New firmware version available:"
2016-09-01 15:05:15 +00:00
# define(length=20) MSG_NEW_FIRMWARE_PLEASE_UPGRADE "Please upgrade."
2016-07-07 18:26:59 +00:00
2016-10-07 15:21:06 +00:00
# define(length=20,lines=8) MSG_FOLLOW_CALIBRATION_FLOW "Printer has not been calibrated yet. Please follow the manual, chapter First steps, section Calibration flow."
# define(length=20,lines=12) MSG_BABYSTEP_Z_NOT_SET "Distance between tip of the nozzle and the bed surface has not been set yet. Please follow the manual, chapter First steps, section First layer calibration."
2016-07-07 19:23:32 +00:00
2017-01-09 12:12:39 +00:00
# define(length=20, lines=4) MSG_FILAMENT_LOADING_T0 "Insert filament into extruder 1. Click when done."
# define(length=20, lines=4) MSG_FILAMENT_LOADING_T1 "Insert filament into extruder 2. Click when done."
# define(length=20, lines=4) MSG_FILAMENT_LOADING_T2 "Insert filament into extruder 3. Click when done."
# define(length=20, lines=4) MSG_FILAMENT_LOADING_T3 "Insert filament into extruder 4. Click when done."
# define(length=20, lines=1) MSG_CHANGE_EXTR "Change extruder"
# define(length=20, lines=1) MSG_FIL_LOADED_CHECK "Is filament loaded?"
# define(length=20, lines=2) MSG_FIL_TUNING "Rotate the knob to adjust filament."
# define(length=20, lines=4) MSG_FIL_ADJUSTING "Adjusting filaments. Please wait."
# define(length=20,lines=8) MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ "Filaments are now adjusted. Please clean the nozzle for calibration. Click when done."
# define(length=20, lines=4) MSG_STACK_ERROR "Error - static memory has been overwritten"
# define(length=20, lines=1) MSG_CALIBRATE_E "Calibrate E"
2017-01-31 09:26:36 +00:00
//#define(length=20, lines=1) MSG_RESET_CALIBRATE_E "Reset E Cal."
2017-01-15 21:11:56 +00:00
# define(length=20, lines=8) MSG_E_CAL_KNOB "Rotate knob until mark reaches extruder body. Click when done."
2017-01-11 17:14:42 +00:00
2017-01-09 12:12:39 +00:00
//#define(length=20, lines=1) MSG_FARM_CARD_MENU "Farm mode print"
2017-01-15 21:11:56 +00:00
# define(length=20, lines=8) MSG_MARK_FIL "Mark filament 100mm from extruder body. Click when done."
# define(length=20, lines=8) MSG_CLEAN_NOZZLE_E "E calibration finished. Please clean the nozzle. Click when done."
2017-01-31 09:26:36 +00:00
# define(length=20, lines=3) MSG_WAITING_TEMP "Waiting for nozzle and bed cooling"
2017-01-15 21:11:56 +00:00
# define(length=20, lines=2) MSG_FILAMENT_CLEAN "Is color clear?"
2017-02-14 10:52:48 +00:00
# define(lenght=20) MSG_UNLOADING_FILAMENT "Unloading filament"
2017-02-02 14:51:16 +00:00
# define(length=20, lines=8) MSG_PAPER "Place a sheet of paper under the nozzle during the calibration of first 4 points. If the nozzle catches the paper, power off the printer immediately."
2017-01-09 12:12:39 +00:00
2016-08-02 10:19:17 +00:00
# define MSG_BED_CORRECTION_MENU "Bed level correct"
# define MSG_BED_CORRECTION_LEFT "Left side um"
# define MSG_BED_CORRECTION_RIGHT "Right side um"
# define MSG_BED_CORRECTION_FRONT "Front side um"
# define MSG_BED_CORRECTION_REAR "Rear side um"
# define MSG_BED_CORRECTION_RESET "Reset"
2016-08-04 15:42:54 +00:00
# define MSG_MESH_BED_LEVELING "Mesh Bed Leveling"
2016-08-05 11:34:21 +00:00
# define MSG_MENU_CALIBRATION "Calibration"
# define MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF "SD card [normal]"
# define MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON "SD card [FlshAir]"
2017-03-06 10:19:21 +00:00
# define MSG_CALIBRATE_PINDA "Calibrate PINDA"
# define MSG_PINDA_NOT_CALIBRATED "PINDA probe has not been calibrated"
2017-04-06 11:14:30 +00:00
# define MSG_PINDA_PREHEAT "Preheating"
