TheZeroBeast
f4073120ef
-m Added Encoder Fix changes
2018-01-25 06:49:28 +10:00
XPila
17cadf463a
Merge pull request #433 from XPila/3.1.1-RC6
...
Extruder resolution changed to 32usteps
2018-01-24 01:42:46 +01:00
Robert Pelnar
cae68d9f6d
Extruder resolution changed to 32usteps
...
build 151
2018-01-24 01:41:42 +01:00
XPila
556205d993
Merge pull request #432 from PavelSindler/invalid_gcodes
...
invalid / unknown gcodes reported on serial
2018-01-24 00:12:47 +01:00
XPila
975ed14cb6
Merge pull request #431 from PavelSindler/fan_error_resume
...
SD card long pause update
2018-01-24 00:12:33 +01:00
XPila
110ab8b2f6
Merge pull request #426 from PavelSindler/temperatures_update
...
Preheat temperatures update
2018-01-24 00:11:59 +01:00
XPila
b2ba72ffcd
Merge pull request #411 from PavelSindler/typo_fixed
...
typo fixed
2018-01-24 00:10:28 +01:00
XPila
777dcf072b
Merge pull request #430 from bubnikv/MK3_fsensor_fullrate
...
Optimization of the filament sensor.
2018-01-24 00:10:00 +01:00
PavelSindler
70ff22571f
minor change
2018-01-23 20:04:18 +01:00
PavelSindler
3adedb558b
invalid / unknown codes reported on serial
2018-01-23 20:01:02 +01:00
PavelSindler
64a709c097
removed temporary debuging code
2018-01-23 19:14:52 +01:00
PavelSindler
05e0abbd9d
startFileprint delayed
2018-01-23 19:11:04 +01:00
bubnikv
44dc12005f
Optimization of the filament sensor.
2018-01-23 16:47:42 +01:00
PavelSindler
c38458eb67
init
2018-01-23 16:21:43 +01:00
XPila
09e0c566e8
Merge pull request #420 from bubnikv/MK3_stepper_blocking
...
Mk3 stepper blocking
2018-01-23 13:15:59 +01:00
PavelSindler
bde1996250
Merge pull request #419 from bubnikv/MK3_debug
...
Support for debug builds:
2018-01-22 18:58:02 +01:00
bubnikv
69f97e0ec3
Separated the "Unknown" build from the "Development" build.
...
Documented purpose of the various build types.
2018-01-22 17:41:05 +01:00
PavelSindler
188116cb7e
Preheat temperatures update
2018-01-22 16:03:43 +01:00
bubnikv
160cdccae1
Merge remote-tracking branch 'remotes/origin/MK3_stepper_blocking' into MK3_fast_dbg
2018-01-20 17:31:26 +01:00
bubnikv
3efd90a9ea
Merge branch 'MK3_stepper_lowres' into MK3_fast_dbg
2018-01-20 17:27:58 +01:00
bubnikv
5deee8f42c
Merge remote-tracking branch 'remotes/upstream/MK3' into MK3_stepper_lowres
2018-01-20 17:24:12 +01:00
bubnikv
a94e266cf1
Documented CPU load and frequency of the following interrupts:
...
9. ISR(INT7_vect) - Fan signal interrupt
26. ISR(M_USARTx_RX_vect) - USB to serial RX
37. ISR(USART1_RX_vect) - R-PI serial RX
2018-01-20 16:20:51 +01:00
bubnikv
815dfcb14b
Implemented a stepper timer reset after a long blocking cli()
...
or DISABLE_STEPPER_DRIVER_INTERRUPT().
If this is not done, the stepper interrupt would likely overflow,
leading to a maximum 32ms delay before the stepper interrupt wakes up.
In addition, the stepper timer overflow error would be reported
by the debug builds.
2018-01-20 15:39:21 +01:00
bubnikv
17a8e2db01
Documented the interrupt blocking by a main thread by its maximum time.
...
Added a debug output to serial line on stepper timer overflow.
2018-01-20 14:58:30 +01:00
bubnikv
9e534c1990
Minimize risk of stepper routine interrupt blocking by reorganizing
...
the routine to move the G-code line length from the command queue
to the planner queue.
2018-01-20 14:37:22 +01:00
bubnikv
7edce0b890
Only show the debug menu in the DEBUG_BUILD.
2018-01-18 16:43:40 +01:00
bubnikv
330f1576fc
Support for debug builds:
...
A build version and repository is displayed on the welcome screen,
D-codes, stack overflow check and stepper timer overflow check
are enabled in the debug mode.
2018-01-18 16:24:25 +01:00
PavelSindler
b5f8b1d97c
Merge pull request #412 from PavelSindler/debug_version
...
initial message for debugging fw version
2018-01-18 13:18:16 +01:00
PavelSindler
c45098d955
Merge pull request #415 from PavelSindler/unload_filament_fix
...
unload filament sequence same as in M600
2018-01-17 21:55:47 +01:00
PavelSindler
e60cb2a79e
unload filament sequence same as in M600
2018-01-17 21:54:34 +01:00
bubnikv
3852ba0b36
Merge pull request #413 from PavelSindler/initial_messages_update
...
initial message not shown on release candidate versions
2018-01-17 17:40:43 +01:00
PavelSindler
4843f2c48e
initial message not shown on release candidate versions
2018-01-17 17:38:34 +01:00
PavelSindler
bfa675c1a4
initial message for debugging fw version
2018-01-17 16:00:19 +01:00
PavelSindler
b73520bcea
successfull -> successful
2018-01-17 14:40:37 +01:00
XPila
b2c257478c
Merge pull request #409 from XPila/MK3
...
3.1.1-RC5 build 148
2018-01-16 19:27:00 +01:00
Robert Pelnar
36e4e39c85
3.1.1-RC5 build 148
2018-01-16 19:25:09 +01:00
XPila
515420ce06
Merge pull request #407 from PavelSindler/MK3_for_merging
...
maiden eeprom: tmc2130_mode is set to normal
2018-01-16 17:10:38 +01:00
XPila
d5500db66d
Merge pull request #408 from XPila/MK3
...
Mk3
2018-01-16 17:10:07 +01:00
Robert Pelnar
c2710fea63
crashdetection limits changed (X=48, Y=64)
2018-01-16 17:04:21 +01:00
PavelSindler
fbf947b75c
maiden eeprom: tmc2130_mode is set to normal
2018-01-16 16:56:58 +01:00
Robert Pelnar
6b5f9253d6
build 147
2018-01-16 16:50:05 +01:00
XPila
026f68fd6f
Merge pull request #404 from PavelSindler/xyz_fixes
...
xyz homing hotfix, xyz cal. status changed
2018-01-16 01:39:57 +01:00
XPila
9efa1d3a03
Merge pull request #403 from PavelSindler/M600_update
...
timeout fix and unload message shortened
2018-01-16 01:39:18 +01:00
XPila
b9746f84c6
Merge pull request #405 from XPila/MK3
...
Mk3
2018-01-16 01:37:45 +01:00
Robert Pelnar
f30da4bbca
babystep synchronisation
2018-01-16 01:34:44 +01:00
PavelSindler
06c6cc119b
xyz homing hotfix, xyz cal. status changed
2018-01-16 01:00:09 +01:00
PavelSindler
d8117eab66
timeout fix and MSG_UNLOAD_SUCCESSFULL message shortened
2018-01-15 17:39:42 +01:00
Robert Pelnar
981a681e52
Temperature ISR synchronization, M600 - faster unload
2018-01-15 17:29:07 +01:00
XPila
9d52d017df
Merge pull request #401 from PavelSindler/rx_buffer
...
get command update
2018-01-15 15:28:19 +01:00
XPila
87ffb0b193
Merge pull request #400 from PavelSindler/M600_update
...
M600 update
2018-01-15 15:27:41 +01:00